130,485 used machines on RESALE, but how to find them? Machine Search
Measuring machine Premetec measuring machine, year of manufacture: 2016, serial number: 08370, int. number: 109, inventory number: 10-1100715-0, machine weight: 1,100 kg, with Siemens Simatic HMI control, PC control, with feed and discharge belt, conveyor width approx. 600 mm, fencing and gripping device Jvodke, Machine designation: Measuring machine
Surface Grinding Machine FAVRETTO MC130, 1300x700 mm, magnetic plate, sistem Digit Plus FAVRETTO, Information about technical data are not binding., Machine available subject to prior sale., Max working dimensions: 1500x750 mm, Working table size: 1300x500 mm, Longitudinal travel x axis: 1640mm, Cross travel y axis: 650 mm, Clearance between worktable and spindle axis: 850 mm, Feed rate x axis: 1 - 40 m/1, Feed rate y axes: 0 - 2000 m m/1, Wheel speed: Stepless by Variable speed drive AC, Wheel dimension: 400x152,4x100 mm, Spindle motor power: 15Kw, Nc: Digit FAVRETTO, Weight: 8.000 Kg, Accessories: Electro permanent magnetic plate 1300x500 mm, coolant tank with paper filter
Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 25.000, -Usable volume approx. 22,500 liters - Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified
Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 44.000, -Usable volume approx. 36,000 litres -Max product weight : 27.500 kg -Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified
Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 44.000, -Usable volume approx. 36,000 litres -Max product weight : 27.500 kg -Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified
Anton Paar ProveTec GmbH Penetrometer Type: PNR 12 Year of construction: 2022 Find more here - / Contact us at -
Bread cutter Wabäma Model: Allround Economy Plus 450.200 Max. number of slices: 100 pieces/min. max. bread dimensions: 450 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Machine mobile Cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Used machine cleaned Option: Maintenance contract Spare blade Service Package Many bread slicers are waiting for you in our warehouse!
Model TS 38 plus Circular Knife Machine Tabletop machine with base mobile Stainless steel version, Manual operation Disc thickness adjustable from 3 - 20 mm Dimensions: 950 x 660 x 1000 mm, WxDxH Bread dimensions max: 370 x 200 x 160 mm L x D x H DGUV V3 tested Connection 400V, 16A-CEE plug Used machine cleaned with 3 months warranty + spare parts service Option: Maintenance contract Service Package Instruction & Commissioning You can find more bread slicers in our exhibition!
Werner & Pfleiderer WP Model: Multimatic MUC 5 5-row Weight approx. 35 to 85 grams Output approx. up to 8750 pieces/hour Press pressure adjustable Ribbon flour Interchangeable chamber drums Connection 400V, 16A-CEE plug Machine We have more bakery machines in stock for you!
Formats: Minimum Book Size: 114x120mm, Maximum Book Size: 268x369mm, Minimum Book Thickness: 3mm, Maximum Book Thickness: 40mm, Mechanical Speed: 3600 Cycles/Hour, 16 Stations Müller Martini 1541 Gathering Stations With Hand Feed And Criss Cross, Spiral Raceway, Connection to Binder, 9 Clamp 1530 Binder, Cover Feeder, Milling & Roughening, Hotmelt Spine & Side Glue, Premelter, Pressing Station Year of Construction: ca. 1997
Key data: 45 °, 2600 mm, 500 mm
400 V, 50 Hz, 2.2 Kw, Cutting height 100 mm, Cutting width 500 mm (extension table + 900 mm added, but the customer shortened the round bar from the rip fence), Sliding table 2600 mm, max. saw blade 315mm, Work table 1060x330 mm, Table extension 390x330 mm, Table extension 900x810 mm, Boom table 1050x630 mm, Cut-to-length stop up to 2800 mm, Height and angle adjustment manually, Extraction connection 100 mm, Hold Operating tools, Spare straps
Tier Oven Wachtel Piccolo PRO II-5 Year: 2021 - Steinplatten oven built in 12 / 2021 - Manufacturer: Wachtel - Type: Piccolo PRO II-5 - 5 floors - 120cm wide and 80cm deep on each floor - With fixed water connection - each floor is equipped with separate swash box - Each floor with separate control - Top and bottom heat can be controlled separately - Oven can be moved on castors - Master control - electr. Connected load 42.3 kW - Year of construction 12 / 2021
Load capacity 6,300 kg Lifting height 1.5 meters Strand count 2 Load chain 9.0 x 27.2 mm Lifting height at one turn of the lever 8 mm Lever pressure at full load 39 daN PT all-purpose equipment is suitable for load securing in accordance with EN 12195 not intended for passenger transport Weight approx. 31 kg
a Plasma Cutter for sale, 70A source, 2500 x 1250 CNC bed 2021 Mantech Phantom P26 The machine is a Mantech Phantom P26, please note that it is running a 70CT GYS powersource rather than Hypertherm. The machine was new in July 2021 and has had only light use, it is essentially in as new” condition. It has touch screen control / windows PC. Power requirement is TWO 32A Class D sockets, plus gas (we run on dry refrigerated air) Find more here - /
two Self-propelled Multifunctional Amphibious dredging/digging equipment SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT 1. Self-propelled Multifunctional Amphibious dredging/digging equipment: 2.1. ALYTUS 2.2. PRIENAI 2. Additional equipment for Multifunctional Amphibious dredging/digging equipment: 2.1. Sand pump 2.2. Bucket 2.3. Grab 2.4. The self-floating hose Equipment Date of Built – 2021/2022 Certificated By RINA. 1. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT (2 identical unites) Basic descriptions: Overall Length – 12,9 m. Moulded Breadth – 6,8 m. Depth – 1,84 m. Max. Draught – 1000 mm. Gross tonnage - 50 (approx.) Net tonnage – 30 (approx.) Total power – 269 kW (Cummins NTA855) Crew – 1 people The lifting capacity of the equipment – 4 t. Maximum suction and digging depth – 6 meters from w ...
Three-phase oil transformer DIN 42500 The four impellers/ wheels are also exist and included the external dimensions are approx. Width 1.4 m Length 2.2 m Height to top edge of LV connection bolt 2.0 m Hermetic version with DGPT2 and Euromold plug connections Find more here - /
Backup power generator LIKE NEW! The current number of operating hours is 21 hours . Manufacturer Zeppelin CAT Model PPO2000-C32 Year of manufacture 2007 Weight 26t Dimensions (L/W/H) 11,0m / 3,0m / 3,2m Condition Very good (used) Remarks/ Info: Engine overhauled in 2014 400 Volt 50 Hz 1200 KW 2000 kVA 1500 rpm According to this, the CAT engines have been completely reconditioned (according to Zeppelin, the engine is better in the repair ,as a new engine) . The current number of operating hours is 21 hours . The machine has been standing since 2014 . We were to a performance test last month at Cat Zeppelin ,there the machine has full power without complaint passed the test . The number of operating hours refers to both engines and the generator. Find more here - /
APV 16" Servo Driven Wire-Cut & Continuous Rope Extruder with Guillotine Cutter APV 16 Servo driven Wire cut and continuous rope extruder with guillotine cutter / Frozen Dough wire cutter originally designed to cut cookies onto waz papaer. - Built new in 2010 - Originally designed to cut pucks of cookies onto wax paper sheets - All servo driven - Allen Bradley controls w Touchscreen - 16" wide two roll extruder - Wire-cut with oscillating knife - Continuous extrusion capable for ropes - Paper feed roller for cutting products onto wax paper - Guillotine cutter for wax paper but can also be used to cut ropes of product to specific lengths - Raising and lowering bed - Die with (5) outlets measuring approximately 0.625" x 1.25" - 3/60/480v - Machine on casters - Footprint approximately 11´ long x 4´ wide Find more here - / Contact us at -
This Pinacho STH 400-105Ã3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105Ã3000 horizontal turning machine. Contact us for more information.
This 4-axis SCHÃCO PBX AL was manufactured in 2008. It features a processing length of 7,200 mm and is designed for the machining of aluminum profiles, including double-bar processing and through-feed capability for longer profiles. The machine includes an automatic tool changer and clamping blocks for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the SCHÃCO PBX AL universal machining centre we have for sale. Contact us for further details.
Circular Metal Saw manufactured in 2013. This SCHÃCO PGS features a maximum saw blade diameter of 400 mm and a motor speed of 2800 minâ»Â¹. It includes essential equipment such as a wireless measuring rod, roller conveyor tracks, a digital control screen, and an integrated extraction unit. If you are looking to get high-quality glazing bead cutting capabilities, consider the SCHÃCO PGS machine we have for sale. Contact us for further details.
This 3-axis SCHÃCO PDG E CUT was manufactured in 2009. It features a maximum saw blade diameter of 600 mm and operates at a motor speed of 2410 minâ»Â¹. The machine includes a discharge conveyor belt and an extraction system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the SCHÃCO PDG E CUT double mitre saw we have for sale. Contact us for further details.
This 4-axis SCHÃCO Profilbearbeitungscenter was manufactured in 2001. It features a travel range of 6,300 x 600 x 405 mm, continuous 180° A-axis rotation, and a high-speed capability of 24,000 rpm. Equipped with an HSK-40E tool holder and an 8+1 tool magazine, it ensures efficient machining. Consider the opportunity to buy this SCHÃCO Profilbearbeitungscenter. Contact us for more information about this machine.
Self-propelled Multifunctional Amphibious dredging/digging equipment Multifunctional Amphibious PRIENAI is new SAND PUMS and floating pipelines These dredging/digging equipment can also be dismantled into separate sections and transportet by land. The equipment can work both on land and in water. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT 1. Self-propelled Multifunctional Amphibious dredging/digging equipment: 2.1. Self-propelled Multifunctional Amphibious 1 2.2. Self-propelled Multifunctional Amphibious 2 2. Additional equipment for Multifunctional Amphibious dredging/digging equipment: 2.1. Sand pump 2.2. Bucket 2.3. Grab 2.4. The self-floating hose Equipment Date of Built – 2021/2022 Certificated By RINA. 1. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT Basic descriptions: Overall Length – 12,9 m. Moulded Breadt ...
Rated current: 22A, connected load: 15kVA, with extensive accessories, the machine is fully functional. An on-site inspection is possible.
Perkins 1100 Series 1103A-33TG2 60.5 kW / 85,8 hp @ 1500 rpm; Power [PS]: 82; Transport weight [kg]: 420
Perkins 1100 Series 1104D-44TA, 83.0 kW / 111.3 hp @ 2200 rpm; Power [PS]: 113; Transport weight [kg]: 567
Twin screw extruder APV Baker, int. ref. APV 5 (Baker Perkins) Ø50/25D + additional liner 10D(for 35D), this was totally revamped in 2017, liners and screws are in quite good conditions, reduction gear was replaced in 2021. Operator panel with recipes and 14 heating zones, all in good conditions. Find more here - / Contact us at -
Fully automated welding system for steel profiles Steel frame construction EWM type Phoenix Plus Electromotive NC drive integrated as robot axis Combination with welding process possible Flexible set-up via interchangeable inserts for IPE profiles from 80 - 160mm various head end variants possible Programming according to customer order Number of combinations according to customer requirements, e.g. : 5 welding programmes and 3 handling programmes ABB type TSC 2013 integrated in MAG package ABB type 7600 Feeding of the profiles: Accumulating roller chain conveyor with stopper and separating function Accumulating roller chain conveyor with stopper and separating function Roller conveyor - gravity principle Find more here - / Contact us at -
Noise protection cabin with indoor crane, used as a welding cabin (therefore optionally with extraction). HüWa noise protection cabin with crane runway including 2 Demag cranes & electric rolling doors. Cabin dimensions: L = 26,000mm, W = 8,000mm, H = 5,300mm Data cranes: Track length: 25,000mm, load capacities: 1,000kg / 500kg, beam lengths: 7,000mm / 7,000mm. KBK crane track with suspensions Crane 1 with electric chain hoist including energy supply and circuit breaker, including electric trolley and crane travel KBK double girder crane load capacity 1,000kg, Electric crane driving with RF125 crane 2 with electric chain hoist including energy supply and circuit breaker, in aluminum version KBK double girder crane load capacity 500kg. Cabin is dismantled and stored in A-4942 belts. Find more here - / Contact us at -
- SFE. Superfast 2x18L CO2 Extraction System manufactured by Thar Process. The supercritical fluid extraction system is designed to extract oil, oleoresins, and other ingredients which become soluble in supercritical CO2 at high pressure and temperature. SFC. Isolator SFC 20 CO2 Purification System manufactured by Thar Process. Purification SFC is a normal-phase chromatographic technique that uses CO2 as the main mobile phase. Find more here - / Contact us at -
weight max. in kg: 2.500 kg fork length: 1.150 mm stroke height: 85 - 200 mm Unicraft type PHW 2508 pallet truck or hand pallet truck for the in-house transportation of pallets, pallet cages and heavy loads. The robust design, smooth steering and compact construction enable reliable and maneuverable work in warehouses, workshops and production. Sample image, illustration similar. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
