demag p 625 used for sale

Fully automatic hot stamping press Oropress Mechanical eccentric press with lift table Lift table as pneumatic sliding table 250 x 250 mm Fully automatic sequence, optionally triggered with foot switch for single stroke Heated press punch 120 x 200 mm up to 250 °C Safety grille Film Feed Unit Built in 1986

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tachometer, cutting speed measuring device, revolution measuring device, economy panel meter, speed measuring device -Manufacturer: Martens, speed measuring device Economy Panalmeter -Type: PW9648-1-00-0-00 -Dimension: 180/95/H50 mm -Weight: 0.6 kg

grinding length: 1.000 mm grinding width: 600 mm workpiece height: 400 mm control: SINUMERK 840 D Grinding Area: : grinding range: max. 1.000 x 600 mm travel cross (z-axis): 540 mm distance table surface - grinding spindle centre: max. 600 mm Travel vertical (Y-axis): 500 mm Max. working height on new grinding wheel: 400 mm workpiece table: : Electro permanent magnetic plate: 800 x 500 mm pole pitch: 18 mm clamping force in 8 levels: - Table drive (X-axis): : Incremental encoder in the longitudinal axis X axi: - table speeds: 2-35.000 mm/min Electromechanical longitudinal movement: - by means of digital servo motor,: - toothed belt and ball screw: - Preloaded precision rolling guide size 35: - Central grease lubrication: - Automatic vertical feed (Y-axis): : min. feed size: 0,001 mm measuring system: Galsmaßstab Max. distance spindle centre - table: 700 Grinding head vertical: 550 mm El ...

Wheel diameter: 900 mm Cutting height: 300 mm cutting width: 880 mm Motor output: 4,5 kW Table dimensions: 840 x 900 mm Table tiltable: -15° bis +45° Grad Dimensions (L/W/H): 1.800 x 1.000 x 2.800 mm machine weight ab.: ca. 1.000 kg saw band length: 6.100 6.200 mm : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Primutini Cut-Off Tape Saw Roll diameter 1300mm Roll width 140 mm Cutting width to the right and left of the Saw blade 150mm Cutting height max. 650mm Drive 30 kW

Valve sack bottomer, type Progress 525, Gartemann & Hollmann, with rotary feeder, valve station, bottom patch station with 1 colour printers each side, Tube width 32-60 cm, Tube length 68-134 cm, Bottom width 7-15,5 cm, machine mounted

Perkins ISM Shibaura E 673 L, 3-cylinder water-cooled diesel engine, displacement 761 cm³, power 11.5 kw/15.4 hp / 3,600 rpm., unused, from stock, incl. starter, and alternator. Other 3-cylinder Perkis diesel engines available, also Isuzu, ISM, Iseki, Komatsu, Kubota, Lombardini, Yanmar.

ELB Perfect BD 10 750, grinding area 1000 x 750 mm, year of construction 2004, grinding spindle 10 KW, grinding wheel 400 x 100 mm, automatic dresser with compensation, electric perm magnetic clamping plate 1000 x 750 mm, partial enclosure with suction, water tank with paper belt filter, the machine is partially overhauled, geometry according to the standard of new machine, we are happy to take over the installation / training on site, as well as the subsequent service.

Make : Tetra Pak Model : TBA 19 Working Hours : 34,000 Format : 250 ml Version : 10 v Y.o.m : 2000 Make : Tetra Pak Model : TSA 46 Make : Tetra Pak Model : Easy ride Make : Tetra Pak Model : TCBP 70 Make : Mariani Shrink Wrapper Make : KHS Model : Palletiser

Temperature controller, temperature control unit, temperature regulator, modular temperature control unit, tool heater -Manufacturer: PSG, temperature control unit for tool heating with up to 8 control zones -Type: RSD II 8 -P max: 21 kW -Dimensions: 490/400/H490 mm -Weight: 30 kg

Winch rope, crane rope, hoist rope, wire rope, clothesline, PVC wire rope -Wire rope: Steel rope PVC coated -Type: 6x7 FC PVC transp. -Rope nominal diameter 4.0 / 5.0 mm -Length: 102 m -Quantity: 2 pieces available -Price: per piece -Weight: 6.6 kg/piece

Make : Tetra Pak Model : TBA 21 Format : 1 L prisma Working Hours : 64,000

PPSM Habrama 2200 Precision Profile Grinding Machine Rack and Pinion Grinding Machine Manufacturer [manufacturer]: Habrama Type [ type]: PPSM 2200 Control unit: Siemens 840D sl Sinumerik Construction year: 10/2009 Travel paths: X-axis (longitudinal): 2200(2500)mm Y-axis (transverse): 500mm Z-axis (vertical): 410mm C-axis: +30°/-30° B-axis: +20°/-20° U-axis: 105mm W axis: 125mm B2 axis: +20°/-20° Workbench: 390 x 3.750mm Max. table load: 4000kg Feed speed X-axis [feed speed]: 21m/min Feed speed Y-axis [feed speed]: 10m/min Feed speed Z-axis [feed speed]: 6m/min Feed speed C-axis [feed speed]: 2m/min Feed speed B-axis [feed speed]: 6m/min Feed speed U-axis [feed speed]: 4m/min Feed speed W-axis [feed speed]: 4m/min Feed speed B2 axis [feed speed]: 6m/min Grinding head Drive power: 45kW (S6 at 40%) Spindle speed: max. 4000 1/min Grinding ...

Key data: 160 KW, 200 kVA, 400 V

Diesel Emergency Generator Type PDH16N with generator 6S160PN 200 kVA, 160 kW, 400V/3Ph/50Hz Built in 1971, only 772 hours run, mainly used in a hospital as an emergency generator

PLC control, electronic module, interference filter -Manufacturer: Pilz, interference filter 10ms unused in original packaging -Type: C-P8-E 306100 -Voltage: 24V -Quantity: 3x module available -Price per piece -Dimensions: 190/150/H30 mm -Weight: 0.3 kg

Module converter, electronic module, base unit, module carrier, carrier clamp -Manufacturer: Pilz, module carrier unused in original packaging -Type: C-P2-BA-0 306004 -Dimensions of box: 180/135/H35 mm -Weight: 0.3 kg

Gear, gears, spur gear, spur gear -Manufacturer: PTI, gear, spur gear module 5 18 teeth -Type: M5 Z18 -Shaft holder: I pilot hole Ø 20 mm -Tooth width: 50 mm -Quantity: 2x gear available -Price per piece -Total dimensions: Ø 100 x 75 mm -Weight: 3.0 kg/pc.

Key data: 650 mm, 1300 mm, 1 U/min

Circulation diameter over bed 1300 mm, over support 1000 mm Center width 6000 mm Bore 130 mm Speed 1.6 - 630 1/min, infinitely variable in 3 ranges Longitudinal feeds 0.09 - 5 mm/rev Thread metr. 0.56 - 128 mm Thread inches 64 - 0.28 g/" Tailstock quill travel 250 mm Total connected load approx. 52 kW Rapid traverse Rotating bezel 2 fixed bezels closed 1 fixed bezel open Coolant tank with pump

Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø16 x 210 mm -Dimensions: 265/100/H95 mm -Weight: 3.1 kg

Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø17 x 210 mm -Dimensions: 265/100/H90 mm -Weight: 2.9 kg

Travel (X/YZ): 3,048 x 1,524 x 150 mm, Cutting head with 5 ́ / 7.5 ́ and 9 ́ lens, sheet metal detection, Laser CV5000 Pallet changer Fabr. Prima Power/OMS Sordella, max. 3,300 kg Extraction system, Fabr. Donaldson, Type 2DFP4-SPRK, 2,400 m³/h, Refrigeration system, Fabr. Hyfra, type sigma 67-S Control Prima Power NC Expressw e³ Laser Classic, YOC 2018,

Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø22/25 x 215 mm -Dimensions: 315/65/H85 mm -Weight: 1.9 kg

Punching tool, punch, scraper, hold-down device -Handover: in current condition as seen -Bracket: Damage see photos -Scraper: hold-down device for punching -Receptacle: Ø26/22 x 210 mm -Dimensions: 315/125/H95 mm -Weight: 4.2 kg

Vacuum ejector, vacuum pump -Manufacturer: Piab, Multi-Ejector Vacuum Pump with Filter -Individual components: see photos -Overall dimensions: 375/210/H290 mm -Weight: 4 kg

Matsuura Horizontal Machining Center CNC control Matsuura G-tech 16i Pallet table size 500x500 mm Number of pallets: 6 Table load 400 kg Spindle speed 15000 rpm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

200 m pallet rack SSI Schaefer PR600 Used goods, good condition, see pictures Height 6.75 m Depth 105 cm Beam length 3.6 m Load/compartment 4000 kg Galvanized frame Straps blue Negotiation price: € 18,000,-- net from stock Offer consists of: + 55 pcs. frame pre-assembled, depth 105 cm, height 6.75 m + 324 pcs. beam, length 3.6 m, 4000 kg ballast/compartment + 648 pcs. Suspension locks + 220 pcs. concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Oldham, charger type High Power III 36-80 -Input voltage: 220/380V 50Hz -Power: 36 V / 80 A -Dimensions: 555/410/H790 mm -Weight: 66 kg

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, incremental encoder -Manufacturer: Point, Incremental Rotary Encoder -Type: EI281B500ZE5LP/LD1 -Hollow shaft: Ø 15 x 26 mm -Dimension: 80/61/H48 mm -Weight: 0.3 kg

Description: -> built in 1999 -> medium format up to 75 x 105 cm -> with protective enclosure / security fence This transomat was used for unloading a high-speed cutter - standing on the right. The Polar Transomat uses split and undivided layers automatically onto pallets, while at the same time is cut further. As a result, production costs, depending on the cutting program, by 25 -70%. Thanks to the patented, movable pallet tip, the Polar Transomat has a particularly high edge accuracy. Increased productivity: stacking at the same time as cutting Improvement of quality: Particularly edge-accurate stacks can be created directly and faster Process.

Manufacturer: Probst & Class (PUC) Type: N/60/S Factory number: 84.016 Power: 2.2 kW with hopper Hopper volume: approx. 20 l LWH: 460 x 330 x 900 mm

LASER PRIMA INDUSTRIE Mod. 2D/3D DOMINO Year 2006 1500x3000 2.5 kw 22,000 working hours Visible in operation No loading and unloading

Dirt trap, flange dirt trap, filter, coarse or fine sieve -Manufacturer: ARI, mud flaps -Slanted seat with flanges -Type: JL1040 DN32 PN16 -Connection: DN32 -Nominal pressure: PN16 -Quantity: 4 pieces -Price per piece -Transport dimensions: 190/140/H175 mm -Weight: 6.6 kg/pc.

CNC control, card slot, control cards, plug-in cards, circuit boards, control -Manufacturer: Robosoft, Control Unit from HACO press brake type PPES 30135 -Type: HACC 013 -Dimensions: 100/85/H80 mm -Weight: 0.2 kg

CNC control, card slot, control cards, plug-in cards, circuit boards, control -Control card: from press brake HACO type PPES 30135 -Type: HACE 032 -Dimensions: 95/70/H50 mm -Weight: 0.1 kg

CNC control, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board, main relay board -Manufacturer: Robosoft, main relay board from press brake HACO type PPES 30135 -Type: PC15 PPESV2 -Board: 338-0149V3 -Dimensions: 400/200/H85 mm -Weight: 2.2 kg.

Flap valve, butterfly valve, shut-off valve, gate valve, gate valve, control valve, actuator -Manufacturer: ARI, thrust drive ARI-PREMIO type 2.2 kN -Voltage: 230V -Protection rating: IP65 -Dimensions: 380/180/160 mm -Weight: 4.2 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Tapping chuck: MK3 mount -Type: PH3/3 -Square: 7 x 7 mm -Bore: Ø 9 mm -Dimensions: Ø 80 x 225 mm -Weight: 3.0 kg

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN32 PN16 -Quantity: 1x valve available -Dimension: 180/140/H280 mm -Weight: 7.2 kg

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN20 PN16 -Quantity: 1x valve available -Dimension: 150/130/H260 mm -Weight: 4.4 kg

Steam trap, ball float, steam trap ARI Cona, ball float steam waste -Manufacturer: ARI, float steam trap with flanges -Type: CNU R4 -Connection: DN50 PN16 -Dimension: 275/230/H365 mm -Weight: 23.2 kg/pc.

GRP tank, upright Volume: 23,000 l Dimensions: Ø 2.00 m × 7.50 m high Spout: DN80

Prisma 09C3 inline checkweigher for shipping/display cartons and similar articles, weight range up to 26.88kg.

Stockpile conveyor 21 m Belt width 650 mm troughed Manufacturer: Polxmair Frame made of square tubing Drive 2.2 KW Can be dismantled, everything is screwed Camp Saxony-Anhalt Price ex farm

Capacity: 120kg of green coffee per roast (480kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase Pneumatic green coffee loader, destoner and cyclone included Optional afterburner Gas: natural gas Burner: Weishaupt indirect modulated The roaster is completely refurbished with: new bearings new direct drive motors with speed control on the destoner, drum and exhaust fan new pneumatics new electric cabinet and controls (PLC and touchscreen, Artisan and Cropster connection possible) new cooling bin sheathing new modulated burner new paint (powder coating) Inspection of the roaster is possible at any time.

Door closer, floor door closer, closing mechanism -Manufacturer: Geze, Pendulo C door closer, unused -Function: Swing door 90 DEGREE - only locks at 0 degrees - 90 DEGREE -Art.No.: 3000-002336 H06-14-00-00 -Number: 44 door closers available -Price: per piece -Dimensions: 315/45/H65 mm -Weight: 1.3 kg

tester, torque wrench, torque tool, torque wrench tester, torque wrench tester -Manufacturer: Norbar, Digital torque tester with case -Type: TruCheck 2 Plus -Part No.: 43521 -Measuring range: 3 - 65 Nm -Mounting: 3/8 -Accessories: see photos -Dimensions: 205/60/H110mm -Weight: 3.8 kg

Key data: 2420 KW, 400 V

MTU 20V4000 and 16V4000 UPS systems with 250 operating hours in mint condition immediately available

Thickness gauge, coating thickness gauge -Manufacturer: PCE, thickness gauge with case -Type: PCE-CT 27FN -Measuring range: 0 - 1250 µm -Accessories: see photos -Dimensions: 250/210/H55mm -Weight: 0.7 kg

Precision balance, spring balance, tension force gauge -Manufacturer: Pesola, precision spring balance type Macro-Line 80196 -Measuring range: 200 Newton -Division: 2 N -Dimensions: 400/40/H40 mm -Weight: 0.5 kg