demag p 625 used for sale

Inductive sensor, electronic sensor, proximity switch -Manufacturer: Telemecanique, inductive sensor proximity switch unused original packaging -Type: XS4 P30PC410D -Number: 3x sensor available -Price per piece -Cardboard dimensions: 80/70/H45 mm -Weight: 0.1kg/pcs

PLC control, electronic control card, control card, output card, controller -Manufacturer: Siemens pilz, FLASH control card PC 612 C/2 -Type: PC 612 F B1300-C480 -Order No.: 304073 -Dimensions cardboard: 90/70/H15 mm -Weight: 0.1 kg

Pester PEWO-pack 450 stretchwrapper for folding cartons, etc., including PEWO-therm shrink tunnel and PEWO-collect packing table, carton infeed with turning device and stacker, film splicing unit, format range cartons min. 30 x 30 x 60 mm (LxWxH), max. 100 x 100 x 250 mm (LxWxH), format range collation/bundle min. 30 x 30 x 60 mm (LxWxH), max. 300 x 380 x 250 mm (LxWxH), capacity up to 50 bundles per minute, electrics 3x400V+N+PE/50Hz, power consumption 13.1 kW, operating pressure 5 bar, infeed height 840 +/-10 mm, outfeed height approx. 800-950 mm, machine floor space approx. 4000 x 2513 mm (LxW), machine height approx. 2100 mm

Heating- and drying oven for temperatures from +20°C up to 300°C. Special turnstile drive for 1L bulkhead jars, TwinDISPLAY. Max. loading of chamber: 300 kg.

Key data: 300 mm

Cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic Workpiece Clamps Minimum Quantity Spraying Device Manual feed Weight: approx. 280 kg

Mobile pneumatic semi-automatic filling machine. Dosing volume: 50ml to 1000ml.

PADE Trimming-Milling-Drilling Machine Model 1000/N: - Self-sliding worktop - Header blade D=400mm, 3 hp motor - milling machine with shaft D=30mm, motor hp 5 - 5-spindle drilling machine, 360° swivel, 3 hp motor Machine not according to CE standards, for export

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch -Manufacturer: Phoenix Contact, FL Switch Industrial Ethernet Switch -Type: SFN 5TX -Order No.: 2891152 -Voltage: 24VDC -Dimensions: 130/75/H30 mm -Weight: 0.3 kg

Complete project for the construction of a mobile drum screening plant Complete production documents for a newly developed car-mobile drum screening plant -Complete set of drawings -Bom -Electrics must be adjusted during initial assembly -2.5 to car mobile drum screen -Capacity: from 25 cbm/h -Propulsion: Diesel generator, generator or direct external feed-in for electricity -no prototype produced yet Price is net plus VAT. Trade-in possible Further data is available on request.

- Convection oven from Wachtel with clipboard, proofer and exhaust hood - Convection oven is Thermico Plus with IQ Air control - Oven is for 5 trays 60x40cm - Proofer is for 16 trays 60x40cm -Electrical. Connected load: 13.7 kW - Year of construction: 11 / 2017 Dimensions: - 97cm wide - 85cm deep - 205cm tall

COPY SHAPER machine PADE UINZE 2300 2T second hand machine machine for simultaneously shaping both sides of the treated piece of wood. the machine is suitable for the production of chairs, tables, beds, armchairs and furniture elements in general. technical details : machine composed by 2 units : 1+1 shaper units . motor power Hp 5,5 each one max. working useful length mm.2500 max. working width mm. 360 max. working heigth mm. 160 speed rotation shaper units rpm 8500 hydraulic carriage forward speed mt./min. 0 / 25 hydraulic carriage return speed mt./min. 40 hydraulic pump motor power Hp 5,5 net weigth kgs.2600 volt. 380/50

Gas and oil burners, oil burner filters, heating oil filters, filter and deaerator units, heating oil deaerators -Manufacturer: oilon, filter and vent unit unused, original packaging -Type: Oilon Plus -Technical data: see photo of the nameplate -Cardboard dimensions: 370/180/H150 mm -Weight: 1.8 kg

PLC expansion module, switchgear, control system, marshalling module, circuit board module -Manufacturer: Phoenix Contact, PHG patch panel -Type: UMK-SE 11.25-1 ID number: 3522449 -Number: 2 modules available -Price: per piece -Dimensions: 115/75/H40 mm -Weight: 0.1 kg/pc.

AS-Interface lower section -Lower part with addressing socket -for connection to flat cables -Quantity: 2 pieces available -Price: per piece

Used automatic tubing machine for aluminum and plastic tubes. Producer Sigma. Model PK1. Technical parameters Efficiency: up to 1,700 pieces/hour depending on the dose capacity and product viscosity Power source: 3+PE+N, 380V/50Hz Input: 4kVA Working pressure: 6 atm Heated air: 2-4atm (required) Air consumption: 2001/min Max. current: 14A Fillable doses: up to 100 ml, (Filling pump 100m1) Tube type: Plastic, metal Recommended main voltage cables: CMSM 5Cx2.5 Recommended main voltage protection: 3-pos. protection 25A char. "B" Electrical coverage of the switchboard: IP 54 Control box coverage: IP 54 Control unit: Simatic S7-200 CPU 226

Thermal imaging camera Infrared camera Brand: Infratec Type: PIR uc With suitcase

Flange bearing, housing bearing, flange bearing unit -Manufacturer: PTI, flange bearing unit type FWS40U -Bore: Ø 40 mm -Mounting hole: hole spacing 102 x 14 mm -Number: 3x flange bearing available -Price per piece -Dimensions: 128/128/H50 mm -Weight: 2.2 kg/pc.

Key data: 80 mm, 1700 mm, 1800 mm

Spindle Diameter: 80 mm Spindle Adapter: SK50 Spindle speeds: 11 - 1000 rpm. X-axis: 1700 mm Y-axis: 1800 mm Z-axis: 1800 mm Spindle off (W-axis): 710 mm Table dimensions: 1100 x 900 mm Elbo Digital Readout: On Y-axis and Z-axis Equipped with: -Turntable - Some tool containers Spindle motor: 7.5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine Weight: 10 Ton

Pipe coupling, pressure coupling, quick coupling, fire brigade coupling, Storz coupling, hose coupling -Manufacturer: Schott, quick coupling type PVR 12/90 to Ø 150 mm -Coupling: size C-DIN 14 302 -Dimensions: Ø160 x 330 mm -Weight: 1.6 kg

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-24 m/min. total power requirement: 27 kw Dimensions (L/W/H): 3900 x 2200 x 2000 mm weight of the machine ca.: 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ------------------------------------- Machine will be checked ! Technical data summary (please inquire about any additional accessories included) ------------------------------------- Generally ------------------------------------- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed motor: 4 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ------------------- ...

-Pizza oven 2 tiers -Manufacturer: Moretto Forni -Model: PD60.60 -400 volts -8.4 kW -Weight: 111 kg -currently 3 ovens with 2 shelves each available in the warehouse Year of construction: 2013, 2016 and 2018

Lifting mixer Diosna D240 Plus Lifting kneader Diosna D 240 Plus with fixed kesel - with stainless steel boiler - Kettle for a maximum of 240 kg of dough or for a maximum of 150 kg of flour - 2 speeds slow and fast - with flour dust cover - Mobile on castors - 380 volts - Machine completely repainted

ILLIG PLS75B Inline Counter/ Stacker, with Hole Punch Station, age 2006 used Inline with ILLIG RDM75K ! Max. Stacking Area: 750 x 350 mm Min Height of formed product: 25 mm Max. height of Formed Product: 150 mm Min. dia. of product : Ø 40 mm Max. dia. of Product: Ø 150 mm Max. length of Product Stack: 730 mm Output rate of Product Stacks: 1200 Stacks/ hr Rotating Head to neatly remove Products from the Thermoformer Mold Inline Hole Punch Station Inline Counter Stacker Station Compressed Air: 0.2 L at 6 bar, approximately Total Drive Rating: 19 kW Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE) Cross delivery conveyor for counted cups. All Motors are Indramat Servo Motors Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls Siemens S7 PLC Controls Delivers Counted Cups/ Containers at Right Angles to machine direction New (Feb- ...

Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Oriental Motor, Vexta Stepping Motor stepper motor unused original packaging -Type PK268-02B -Shaft: Ø 6 x 18 mm -Dimensions cardboard: 140/80/H70 mm -Weight: 1.1 kg/pc.

Safety relay, safety controller, emergency stop switching device, switching device, safety sensor, safety switching device, expansion module -Manufacturer: pilz, safety relay safety switching device -Type: PNOZ mo4p -Number: 6x module available -Price per piece -Dimension: 100/35/H135 mm -Weight: 0.2 kg/pc.

amount: 39 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Safety relay, safety controller, emergency stop switching device, switching device, safety sensor, safety switching device, expansion module -Manufacturer: pilz, safety relay safety switching device -Type: PNOZ mi1p -Number: 2x module available -Price per piece -Dimension: 100/20/H130 mm -Weight: 0.1 kg/pc.

amount: 9 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 63 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 13 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 26 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

standing PE tank, sulfuric acid tank. Flat bottom Volume: 16.7 m³ Dimensions: Ø 2.57 m x 3.90 m high

PLC control, digital input, digital input, input module -Manufacturer: mushroom, digital input Digital Input 24VDC -Type: P10-DI 304100 -Number: 7x module available -Price per piece -Dimensions: 250/230/H40 mm -Weight: 1.0 kg/pc

PLC control, digital output -Manufacturer: Pilz, Digital output 24VDC/2A -Type: P10-DO 304110 -Number: 5 modules available -Price: per piece -Dimensions: 250/230/H40 mm -Weight: 1.1 kg/pc

PLC control, digital input, digital input, input module -Manufacturer: mushroom, digital input Digital Input 24VDC -Type: P10-DIF 304105 -Quantity: 1 piece available -Dimensions: 250/230/H40 mm -Weight: 0.9kg

Pneumotec Workpiece Accumulator PWS 100 Year of construction: 06/2013 Plate diameter 220 mm Number of plates: 20 pieces Height 1200 mm +/-100 mm adjustable Width 780mm Length 3150mm

standing GRP tank, polyester tank, with feet Volume: 35 m³ Dimensions: Ø 3.00 m x 5 m high

Remaining: White Chassis number: 3860 Weight: 0,02 tons Length mm: 1000 Width mm: 500 Height mm: 1000 Condition machine : Good Photos/film available: Photos available

PLC controller, digital input, input module, digital output, expansion module, extension rail -Manufacturer: Pilz, Extension Module par. Extension Rail -Type: P10-EPE 304096 -Quantity: 1 module available -Dimensions: 250/230/H40 mm -Weight: 0.8 kg

PLC control, digital input, digital input, input module, digital output, digital output, expansion module, extension module, extension rail -Manufacturer: Pilz, Extension Module par. extension rail -Type: P10-EPB 304091 -Quantity: 1x module available -Price per piece -Dimensions: 250/230/H40 mm -Weight: 0.8 kg/pc

GRP tank standing on the skirt, polyester tank, reinforced, with inner coating with cone at the bottom, possible density: 1.3 kg /l Volume: 30 m³ Dimensions: Ø 2.85 m x 8 m high incl. skirt cylindrical length: 4.70 m

Position computer, computer, control unit, robot controller, controller -Manufacturer: Pilz, AT-Industriecomputer -Type: P10-ATW VGA 304512 -Dimensions: 310/250/H165 mm -Weight: 4.4 kg

Module converter, electronic module, base unit, module carrier, subrack, basic carrier, basic mounting rail -Manufacturer: pilz, Basic Mounting Rail -Type: P10 BG-S 304006 -Dimension: 650/230/H40 mm -Weight: 2.8 kg

SPECIFICATIONS Inlet opening mm: 1000 x 720 Installed capacity KW: 18.5 Voltage: 380 volts Hourly output: 300 kg Screen diameter mm: 10 Hydraulic pump 13 cm3 - 1000 rpm Complete with control cabinet and cover

COMPOSITION: 01 Motorized roller conveyor/transversal/lifting roller conveyor mm 2,500 x 1,100 for feeding 01 Motorized roller conveyor consisting of mm 18,000x1,100-1,300 for unloading; Packaging dimensions on pallet mm 2,500x1,200; Speed controlled by inverter 01 Automatic wrapper Wraptor Dinamix HS with stretch film H 2.150 mm max. 01 Heating unit for automatic roll cutting 01 Siemens touch monitor and CNC control, hourly output max 40 pallets/h

Used dosing unit CANOL, type: P10-E -in bakery condition- 2 pieces available - Built in 1998 and 2000 - Condition: Bakery condition, ready for immediate use - Number of nozzles: 1 piece -El. Connection: 400 V, 50 Hz, 037 kW Viewing and test run are possible by arrangement.

Chassis number: 5084 Weight: 0,25 tons Power: 1,3 kw Length mm: 1000 Width mm: 1000 Height mm: 1800 Working height: 90 cm Transport size L x W x H: 1,0 x 1,0 x 1,8 Condition machine : Used Control type: Manually Electric. Connection: 16A 5P Photos/film available: Photos available Remaining: Originally it is a Quaranta

Serial Number: 5085 Weight: 200 kg Power: 1,1 kW Length mm: 1000 Width mm: 900 Height mm: 1800 Working height: 90 cm Min.-max. glass thickness: 2- 8 mm Min.-max glass size: Min. 100x100 - < Number of brushes: 1 Condition machine : Used Control type: Manual Electric. Connection: 16A Missing parts: None Electric diagram: Photos and video available

Inv. Num. : 7474 Type: TPX 100 Producer: Teca-Print Created: 2006 Parameters: Vertical stroke: 100 mm Capacity: 1800 cycl./h Machine dimensions: 380 x 762 x 560 mm Weight: 30 kg Components of the offer: Base MS250 Cross Table KT30 Swab Feed

Fully automatic hot stamping press Oropress Mechanical eccentric press with lift table Lift table as pneumatic sliding table 250 x 250 mm Fully automatic sequence, optionally triggered with foot switch for single stroke Heated press punch 120 x 200 mm up to 250 °C Safety grille Film Feed Unit Built in 1986