demag p 625 used for sale

Philips c.arm PULSERA CE mark / manf.2008 BIG Image Instensifier 17-23-31cm SW.1.8.1 / BV FAm. 1.2 # NEW BATTERY PACKAGE # 2x flat LCD Monitor´s Sony Printer / manuals - Full software option ́s - Welcome to inspect & test exw Germany

Diosna Kneader Type: S35 Plus Stainless steel boiler Stainless steel lifting arm Flour dust cover 1x timer with lock Height: 100cm Width: 70cm Depth: 70cm

(slitter / cutter / creaser) M. No.: 081058130 Power: A4 brochures (cut on 4 sides, creasing centrally) 9 sheets / min. (540 sheets / hour) Format: min: 210 mm (wide) x 210 mm (long) Max: 320 mm (wide) x 650 mm (long) Gramatur (gr / m) : min 110/ max. 300 Equipment / Additional information: Creasing: 1 x creasing knife across the sheet running direction Max. Programmable 10 creases, programmable in steps of 0.1 mm

TABLE mm 2600 x 530 ROLLS min. ÷ max. mm 0.4 ÷ 3 STRIP FABRIC MAX MM 5 max. workpiece height min. ÷ max. mm 12 ÷ 50 min length or width processable plate mm 190/65 Speed m/min 7

Electric motor, three-phase motor, pump motor -Manufacturer: Linn Pumps, pump motor without pump -Type: TP 80E -Power: 0.75 kW -Speed: 2900 rpm -Shaft: Ø 16 x 20 / 18 x 40 mm -Design: B3/B14 -Protection rating: IP54 -Dimensions: 328/157/H190 mm -Weight: 11.3kg

Level limit switch, level measuring device, sensor, switch, level transmitter -Pepperl+Fuchs Part No.: 103375 -Dimensions: 130/120/H30 mm -Weight: 0.2 kg

Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 20 kV/100 V 120/1 A 4.156-0-4.156 MW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg

Measuring transducers, power measuring transducers, real power measuring transducers -Manufacturer: Muller Ziegler, transmitter -Type: Pdr-MU 30 kV/100 V 50 Hz 150/1 A 500-0-7500 kW -Price: per piece -Number: 2 pieces -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece

Connection line, connection cable, cable line, socket cable, socket line -Manufacturer: Festo, socket cable unused Ovp -Type: KMYZ-9-24-2,5-LED-PUR-B -Mat no.: 193786 -Number: 4x available -Price: per package -Dimension package: 200/180/H10 mm -Weight: 0.1 kg/piece

Used refrigerator, manufacturer KKT Kraus, model PWT 10, year of construction 2005

Panasonic NE1880 Microwave Stainless Panasonic pro II microwave, programmable controls, clear digital display, 16 programmes, capacity 44l, 1800W, 1Ph (11 in stock)

Frequency converters, frequency converters, drive converters, controllers, inverters -Manufacturer: Siemens, Sinamics Power Module 240 -Input: 3 AC 380-480 V 31.5 A 50/60 Hz -Motor: IEC 7.5/11 kW -Dimensions: 340/190/H290 mm -Weight: 12.7 kg

table diameter: 800 mm : . table load: . t total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m 4 jaw chuck 500 diameter The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale, it apply only our business and conditions of sale. about us more than 500 machines in stock over 8500 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 690/400 V 50 Hz 150/1 A 0-150 kW -Number: 4x devices available -Price: per piece -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece

Measuring transducers, power measuring transducers, real power measuring transducers -Manufacturer: Muller Ziegler, transmitter -Type: Pdr-MU 575/332 V 50 Hz 3000/1 A 500-0-3000 kW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg

PAUL recutting saw type s-900-L with a passage width 906 mm, Cutting width 180 mm. The feed is infinitely adjustable 0- 90 m-min. The saw motor has 110 kW. Saw blade diameter 550 mm at 2500 rpm. With automatic feeding, Spreiselabscheider double-lamellig with pull-out tapes

LADENOFEN RUSTIKAL - GEBRAUCHT. FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE MICH BITTE

Product number: 2580 Type: PlatForm Serial number: E010990205253 Year of construction: 2019 Platform height: 600 mm Steps: 2 pieces Dimensions: 2100 x 750 x 1700 mm

Metal plaster KD for 98cm sheets - Sheet metal cleaning machine brush machine - suitable for 98cm sheets with 2 edges Margins on the short side - mobile on wheels - 380 volts

Sell a TBT quill block, Condition new. Pinol block has never been installed. Original price is 30.800,00 Euro net. .VB

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 88 teeth -Weight: 9,5 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 176 teeth -Number: 20x saw blades available -Price: per piece -Weight: 10 kg/piece

Tool holder, milling holder, milling tool, test mandrel -Test pin: Ø 50 mm, with tip -Adjustment: SK50 -Dimensions: Ø 97 x 350 mm -Weight: 5.3 kg

Power cable, solar cable, fiber optic cable, fiber optic line, data cables, LAN cables, fiber optic cables -Manufacturer: Phoenix Contact, Fiber optic cable -Type: I-VH11Y 2K200/230 10A17 8B20 HCS Rugged -Length: 83 m -Price: complete -Dimensions roll: Ø 500 x 410 mm -Weight: 10 kg

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables, fiber optic cables -Manufacturer: Phoenix Contact, fiber optic cable -Type: AT-VQHB2Y -Application area: outdoor use -Length: 72 m -Price: complete -Dimensions roll: Ø 500 x 370 mm -Weight: 14 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm -Number of teeth: 160 teeth -Number: 8x saw blades available -Price: per piece -Weight: 6 kg/piece

--> with discharge screw; Volume : 110 ltr. Drive : 15 KW Drive screw discharge : 7,5 KW Material : Mild steel Weight: 3000 kg Dimensions : L 2.60 m x W 1.60 m x H 1.80 m.

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 18 mm -Number of teeth: 120 teeth -Weight: 6 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 80 mm -Hole circle: Ø 120 x 22 mm -Number of teeth: 88 teeth -Number: 4x saw blades available -Price: per piece -Weight: 10,4 kg/piece

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm - Bolt circle: Ø 100 x 17 mm -Number of teeth: 80 teeth -Number: 4x available -Price per piece -Weight: 5.7kg/pcs

--> Tilting kneader with double jacket Material : wetted areas in stainless steel Volume : 260 ltr. Usable volume: 200 ltr. Dimensions: L 2.60 m x W 1.20 m x H 1.35 m.

--> tilting kneader, with double jacket; Material : wetted areas in stainless steel Volume : 210 ltr. Usable volume: 160 ltr. Dimensions : L 2.40 m x W 1.15 m x H 1.35 m;

Drive : 200 KW Volume : 90 ltr. Usable volume: 63 ltr. Bucket speeds : 45.5 / 41.2 rpm Drive : 200 KW Engine speed : 1500 rpm Weight: ca. 11,5 to Weight gearbox: approx. 2950 kg.

Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 50 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scorer wi ...

Drive gear to mains belt furnace NBO Winkler from spare parts warehouse unused

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: Pacoma, single-acting hydraulic cylinder, 133 mm stroke -Type designation: 3483441M91 43 L 01 -Cylinder: outer Ø 75 mm -Piston rod: Ø 60 mm -Dimensions: 325/75/H120 mm -Weight: 8.6 kg

Philips Diagnost TH with the following system components Generator Optimus 50 Tube RO 1750 0.6/1.2 (ceiling hanging) Vertical tripod Diagnost VE/VT • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and equipped with Stretch film wrapped and can be picked up immediately • You buy the system in "as-is" condition ex warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation, commissioning and configuration of the plant or parts of the plant must be carried out by the manufacturer or by a by the manufacturer authorized specialist or technician!

Continuous/normal drilling capacity 18/20 mm Threading capacity M12 (depending on pitch) Lockers MK II Drilling depth 100 mm Projection 240 mm Column diameter 82 mm Usable work surface W x L 340 x 280 mm T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed indicator: Digital Drilling depth indicator: Digital Drilling depth stop: quickly adjustable stop ring Manual drill feed Table height adjustment with rack Motor three-phase current – frequency-controlled, 230 V, 0.75 kW Spindle speeds infinitely variable 30 – 3000 1/min Table work surface: 155 - 415 mm Footwork: 155 – 550 mm Machine dimensions: 355 x 705 x 1065 mm Weight: 170 kg Optional accessories: Drill package 3: with [felix] 2.0 100 Machine vice Flott [felix] 100, Quick-change drill chuck 3-16 mm (accuracy 0.17 mm), Kegeldorn MK 2 B18 and reducing sleeve MK 2 to Mk 1 � ...

Depalletizer is used for unloading new bottles, delivered on pallets. After clamping one whole row from bottles layer by gripping head, the device delivers them to the unloading table, and the bottles are transported to the washing machine or filling machine. - Capacity up to 6 000 bottles / hr. - Operation - 1 person - Dimensions of bottles: - diameter 20 to 120 mm - height from 50 to 350 mm - Lifting height to 4m, - lifting capacity – to 40 kg - Lifting speed - 7m / min - Speed - 7 m / min - Enviroment temperature - 5 to 45 degrees C - Total power requirement - 0,8 kW - Air Pressure - 0.5 - 0.6 MPa / stable /

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Manufacturer: Stork-Packo, conveyor belt with high load capacity -Type: SAL-HE 10 -Metal belts: belt width 2 x 150 mm -Conveying length: approx. 2200 mm -Drive: without drive motor -Dimensions: 2350/460 / H210 mm -Weight: 127 kg

Brotschneidemaschine verwendet. Sehr guter Zustand.

Technical data for the shelf connector: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 250 mm Cross-section: U 50x25 mm Material color: sendz. galvanized Weight: 0,29 kg | Pcs.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Parker, hydraulic cylinder stroke 600 mm -Type: C-3LRLS29MC -Piston rod: Ø 88 mm -Admission: shaft Ø 25/10 mm -Piston: Ø 127 mm -Pmax: 100 bar -Dimensions: 1070/210 / H140 mm -Weight: 66 kg

Emergency generator set 200 kVA Volvo / WA-V 200 S Machine Execution: Unit type: Stationary Design: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine type: TAD 733 GE Engine No.: 5312956418 Motor power: 201 KW Cooling: Water-cooled Power: Electric 12 V DC Speed: 1,500 rpm Fuel: heating oil or diesel B7 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL 044 M M 6S/4 Gen.Nr.: 39786300005 Generator capacity: 200 kVA Voltage: 400 / 231 volts Power factor: cos. - phi 0.8 Speed: 1,500 rpm Switchgear: Version: Automatic start Tank: Design: Base frame tank with drip tray Dimensions of the unit: Width approx. mm: 1.200 Height approx. mm: 2.200 Length approx. mm: 3.600 Weight approx. KG: 3.550 Use: Condition: Demonstration machine Year of construction: 2023 Delivery time: immediatel ...

Emergency generator set 100 kVA Volvo Penta / WA-V 100 S Machine Execution: Unit type: Stationary Design: Soundproofed Technical data engine: Engine manufacturer: Volvo Penta Engine type: TAD 531 GE Engine No.: in production Motor power: 102 KW Cooling: Water-cooled Power: Electric 12 V DC Speed: 1,500 rpm Fuel: heating oil or diesel B7 Technical data generator: Generator manufacturer: Stamford AvK Generator type: UCI 274 C1 Gen.Nr.: N22B053121 Generator capacity: 100 kVA Voltage: 400 / 231 volts Power factor: cos. - phi 0.8 Speed: 1,500 rpm Switchgear: Version: Automatic start Tank: Design: Base frame tank with drip tray Dimensions of the unit: Width approx. mm: 1.150 Height approx. mm: 1.950 Length approx. mm: 3.000 Weight approx. KG: 1.920 Use: Condition: Demonstration machine Year of construction: 2023 Delivery time: immed ...

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm -Piston diameter: 20 mm -Piston rod: Ø 8 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 27/188 mm -Weight: 0.3 kg/piece

Laminator Peak PP-450 HR; good condition; cleaned and tested; Working width 450mm; .max. Strength 350mic.; temperature range 100-160 C'; Speed 650mm/min.; Table unit. Laminating machine Peak PP-450 HR; good condition; cleaned and checked; working width 450mm; max.thikness 350mic.; temperature 100-160C'; Speed 650mm/min.; table top machine.

swing diameter: 430 mm centre height: 450 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the shelf connector: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 300 mm Cross-section: U 50x25 mm Material color: sendz. galvanized Weight: 0,33 kg | Pcs.

swing diameter: 430 mm centre height: 450 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.