134,065 used machines on RESALE, but how to find them? Machine Search
Hotmelt lamination line BC 62 Nordson Porous coating 80cm-1675mm full line with inline printing unit 2 unwinders, 1 rewinder 1 inline printing unit Hot melt lamination Hotmelt Laminator Hot melt lamination line Hot melt lamination stand Hot melt coating stand Hot melt coating line Nordson BC 62 Porous Coating Coating weight : 0.85-60 g/m2 Web width : 2400mm bm 200 bulk melter tank , heated hoses, hot melt applicator, Metering gear pump station and coating head • Hot melt application gsm : minimum 0.87 gsm/m2 • Hot melt application gsm : maximum 60 gsm /m2 • hot melts: SIS/SBS, PSA,EVA,PUR based
Hamburger forming machine, Sind, NEW Capacity: 2100 pieces / hour Hamburger forming diameter: 90 mm to 120 mm
Used dough weigher W&P, Type: Parta U 2002 -Refurbished- - Frequency controlled - completely overhauled - Condition: Very good, ready for immediate use - 6 months warranty - Capacity: 1,230 - 2,840 pcs./h - El. Connection: 3x 230 / 400 V, 50 Hz, 3 / 10 A The machine has been completely overhauled and is immediately ready for use. Viewing and test run are possible by arrangement.
Hamburger forming machine, Sind, NEW Capacity: 1000 pieces / hour Hamburger forming diameter: 90 mm to 120 mm
; Gross weight [kg]: 9896; Registration Number: 1; Engine: Perkins 4008-30TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including ATS System for Automatic start/stop when the grid fails.; Water Tank Volume [l]: 2060
table length: 1200 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 521 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 554 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 1075 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm weight: 1425 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
range L-W-H: 490x310x190 mm weight max. in kg: 20 kg Temperature range: -10° +50° °C Colour: grün RAL material: PST AU Lot storage stackable by lateral and rear tongue and groove can be connected to each other approx ca. 700 pieces in Stock Packing unit: Pallet Exception, for small quantities only if you pick them up yourself in Goldenstedt. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 392 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 25 mm square edge steel: 22 mm L-beam: 70 x 7 mm cutting capacity: 100 x 10 mm plate thickness: 10 mm total power requirement: 1,3 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,1 x 0,65 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TEKO composite system with 4 PCS FRASCOLD compressor type Z30.126. With control box
This line is an automatic filling line for bottles with Ø 38 mm wide mouth neck including aseptic filler, filling height control unit, labeling, foil shrinking, handle applicator and conveyor system used in the PET bottling for still and cold products like milk or juice.
Make Prakma Model EH-1 Year +/- 1970 ́s Roller width 370 mm Booksize 100x80x2 mm - 370x280x70 mm Speed 300-900 cycles per hour
weight max. in kg: kg fork length: mm stroke height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Standard equipment - Thread cutting device - Control panel with OLED display - robust, high-quality drill head hood - LED lighting - quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with CEE plug - mechanical feed of the Z-axis - incl. electromagnetic coupling for 3 feed speeds - Drill cross with push button - in thread cutting mode: right-left SPECIFICATIONS Continuous/normal drilling performance (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Thread cutting capacity max.: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Projection: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Speed display digit ...
305m2 Peri Trio 3.30m Peri TRIO is a cranable formwork system that can be used standing or lying down. With the patented BFD alignment lock, all element connections are made flush, flush and tight. The only necessary connecting part for normal element joints, outside / inside corners, hinged corners, fitting timber compensations up to 10 cm or the clamping of squared timber is the alignment lock BFD (can be operated with one hand). All floor plans can be formed with just a few element widths. The powder coating prevents the concrete from sticking and enables quick and easy cleaning. Maximum permissible fresh concrete pressure: 80kN /m2
- Special: with carton box passage - Very few operating hours - Condition technically and optically practically as good as new Dimensions: - Length: 3300 mm - Width: 900 mm - Height: 1800 mm
table length: 1500 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 913 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 408 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1200 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 544 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mm table width: 2000 mm table height: 200 mm bore: 28 mm weight: 1299 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Telescopic Conveyor/Conveyor Belt/Telescopic Belt Conveyor -18 meters long Manufacturer: Podner Fördersysteme Condition: used Model: Belt/ Unloading Telescopic Conveyor Length retracted: approx. 7650 mm Length extended: approx. 18740 mm Total width incl. control cabinet: approx. 1200 mm Total width without control cabinet: approx. 920 mm Belt width: approx. 600 mm Strap type: smooth Conveying height: approx. 750 mm (incl. shims) Including control cabinet Including SEW motor: 2.2 KW and 0.55 KW Wiring diagram included Internal Article Number: 2026021105 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined convey ...
Homogenizing Mixer CML50 Key data: • SYMEX CML50 • Working volume: 50 • Anchor agitator with scrapers and breaker 13 ... 111 min-1 • Homogenizer Co Twister • • Pump - Rotor Speed: 300.. 9360 min-1 • • Shear - Rotor Speed: - 9360 .. 9360 min-1 • Circulating line • CIP • Lid Hydraulically liftable • Control via touch display • Heating, cooling, vacuum, ... • New seals • Pharmaceutical version, but can also be used in cosmetics Media supply: • Cooling water flow: approx. 1 m³/h at 3 bar • Cooling water for vacuum pump: approx. 0.2m³/h at min. 2 bar • Compressed air: approx. 1000 L/min at 8 bar • Electricity: 3x400V at 50Hz; 45.0 kVA / 45.0kW • Steam: 6-8 bar, 45kG/h The machine is factory overhauled and can be visited. We supervise your "Turn Key" project, including assembly at your premises and commissioning.
SYMEX P 1000 Agitator Tank Technical data: • Max. filling volume: 1000 l usable volume • Min. filling volume: approx. 250 l (minimum usable volume) • Product: pharmaceutical liquids, aqueous solutions • Operating voltage: 400 V, 50 Hz, PEN • Agitator: 4 kW • Permissible operating overpressure interior: -1 ... +1 bar, • Permissible operating temperature indoors: 95 °C Agitator system • Design: slow-running armature agitator (simplified comb bucket agitator without scraper system) with one (1) • • piece of current breaker; • Possibility to permanently dismantle the agitator and the current jammer when it is not needed. • Stirring tool: armature stirrer, central installation in the container lid • Drive: Bevel gear • Drive power: approx. 4 kW • Speed: approx. 5 ... 20 min-1; Adjustable via frequency converter Current breakers • One (1) ...
MEGAPLOT XTR PRO 1200 CNC foam cutting machine was built in 2020 in Poland by Megaplot J.Wójcicki M.Jagła SJ. The machine enables precise cutting of any shape in a wide range of rigid foams, soft foams and rockwool. Cutting is performed fully automatically by means of an endless wire, which accelerates to a speed of 280 km/h. Project files, including shapes and their layout, can be prepared in any graphics program (CorelDraw, AutoCAD etc.). This is because the advanced FastWire software supports all major file formats. The MEGAPLOT XTR PRO upholstery foam cutting machine is also equipped with a controller which enables simulation of the cutting process and setting of the machining parameters with their change during the cutting. All this makes the offered machine an excellent choice for businesses producing, among others, insulation elements, packaging and upholstered furniture. Tec ...
Builder: GREEN TECHNIK Model: BS 750 PTO Engine: 66 kW (90 HP) Data: L. 5.700 mm x W. 1.920 mm x H. 2.900 mm Year: 2003 Hourly Production: 25 m³/h Shredding System: 64 HAMMER
Laser Prima Industrie Model Platinum 9000L 3000x1500 2500W Year 2000 PRIMACH 9000 CNC Pallet change 19,021 hours Generator hours 25.719
FrymaKoruma (ProXES) Type DinexH 200 vacuum high shear emulsifier for the production of high-quality emulsions, suspensions, creams and lotions, total volume 200 litres, usable volume 160 litres, minimum volume 15 litres, usable operating pressure product chamber -1.0/0.0 bar, usable operating pressure double jacket -1.0/+6.0 bar, scraper agitator (single-arm, counter-rotating scraper agitator, direction reversal for cleaning, flow breaker with perforated mixing blade mounted in the lid, PTFE scraper plate, agitator drive 1.5 kW, agitator speed fixed), high-performance homogeniser (rotor/stator system, tool size 160 mm, power 22 kW), main vessel lid (domed design, camera installed on the lid, 1 DN 125 sight glass incl. wiper and light, 1 DN 32 vent valve incl. electro-pneumatic valve, 1 pressure transducer, lid closure by means of segment clamp screws), container lid can be lifted, tilte ...
Spindle diameter 100 mm x-travel 1600 mm y-travel 895 mm z-travel 800 mm Table area 1200x1000 mm Table load 4000 kg Spindle stroke 600 mm Speed 14-1500 rpm Feed 1.7-2400 mm/min Rapid traverse 2500 mm/min Total power requirement 9.7 kW Machine weight approx. 12 t Guide paths hardened Tool holders ISO 50 Machine is energized, Schematic
Werner Pfleiderer Double Conus Kneader used unfortunately no type plate available, we assume DK65, for which we do not guarantee Machine in condition as returned by the customer, was overhauled according to the previous owner smooth and smooth running, machine automatically switches to the second stage Timer adjustable for 3-30 minutes, head then lifts independently Machine also runs with the head open or can be lifted during operation, this should be corrected before use by means of limit switches The machine must be thoroughly cleaned before use Video about test run and other pictures available
TO WHOMIT MAY CONCERN ; WE VE NEW UNUSED COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 AT OUR STOCK ADDATIONALY WE VE RECON COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 COMPRESSOR SIDE AND TURBINE SIDE ARE NEW .. THIS ROTORS ARE FIT FOR BELOW EXHAUST TURBO CHARGER TYPE TYPE ABB VTR 304 P 11 HT 439312 n max 467 n bmax 443 t max 680 t bmax 650 HZTL 428765 P3 EX STOCK. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
2018 Xeikon 3030 plus 5 colurs digital label press roll to roll Manufacturer: Xeikon Type: 3030 plus Web width: 330 mm Year of production Machine comes with 2 spare developers for Orange and green Key Specifications: Technology: Dry Toner, Full Rotary Print Resolution: 1200 dpi (with 4-bit variable dot density) Web Width: 330 mm (13 inches) Print Speed: Up to 15 meters/min (49.2 ft/min) Colors: 5 (CMYK + Opaque White or Spot/Gamut Color) Substrates: Wide range, including self-adhesive materials (BOPP, PVC, PET), paperboards, and papers (40-350 GSM) Toner: FDA-approved, food-safe Features: Variable repeat length, inline densitometer, potential for inline finishing, metallic label production via ColorLogic, microtext, variable data.
Broyeur Piovan type RN2030 Année 2000 en bon état 400 V - 50 HZ Puissance : 5,5 KW Poids : 490 KG
AREVA POTENTIAL TRANSFORMER TYPE: VLT - 15 NUMBER: 06.1341 GROUP: 3 USE: INTERIOR M. ISOL. RESIBLOC F 60HZ YEAR: 2006 PURCHASE 980085 MAX: 15 KV N.I 34/110/-- KV MASS 58 KG UP 13800/V3 STANDARD/YEAR NBR - 6855/92 US: 115/V3 P TERM: 500 VA ACCURACY: MANUAL 18466 0.3 P75 X1 - X2
Heidelberg SM 52-2 plus version Age: 2009 Counter: only 799.065 impression (Machine comes from school) Format: 37 x 52 cm Performance: 13.000 sheets/hour Equipment: 2 color Straight machine Pull lay control in Feeder Multiple sheet detector/electromechanical in Feeder Ultrasonic double sheet detector in Feeder Alcolor Baldwin BasicLiner 1.0l, Hydrostar compact Press Center Compact Ink flow control Inking Unit wash up device Blanket Unit wash up device Impression cylinder wash up device EasyPlate Sheet slow down device in Delivery Antistatic device compact in Feeder and delivery Plus version for Nummeration and Perforation Powder sprayer With punch and bender With books
MAN cylinder liner, for engine 28/32 Part number: 1152579
Perkin Elmer Chemagic 360-D Nucleic Acid Extraction System The Perkin Elmer Chemagic 360-D is an automated benchtop system for the isolation of nucleic acids (DNA and RNA) from a wide range of sample materials. It uses Chemagen's magnetic bead technology to extract high-purity nucleic acids for various downstream applications. Key Features and Specifications Technology: The system is based on the patented Chemagen M-PVA magnetic bead technology. Metal rods are magnetized to collect the beads containing the bound nucleic acids and transfer them between different process solutions, minimizing cross-contamination. Sample Volume Flexibility: It offers different "Rod Heads" for different volume ranges and throughputs: 12-Rod Head: For sample volumes from 1 mL to 10 mL. 24-Rod Head: For sample volumes from 200 μL to 4 mL. 96-Rod Head: For sample volumes from 10 μL to 400 ...
Compact device for automated nucleic acid purification The Perkin Elmer Chemagic 360 is an automated benchtop system for isolating nucleic acids (DNA and RNA) from a wide range of sample materials. It uses Chemagen's magnetic bead technology to extract high-purity nucleic acids for various downstream applications. With dimensions as small as 80 x 80 cm and its unique sample volume flexibility, the Chemagic 360 is an innovative instrument that can be adapted to almost any of your nucleic acid purification needs. Utilizing the proven M-PVA Magnetic Bead technology, the Chemagic 360 delivers high yields of high-purity nucleic acids suitable for a wide range of downstream applications such as NGS, MLPA, genotyping, and PCR. Features at a glance • Optimized design to avoid cross-contamination • Sample volume from 10 μl - 10 ml • Throughput from 96 to 4000 samples per ...
Key data: 3 , 2000 kg, 2500 mm
Description, subject to prior sale Robot type: IGM RE 497-S in hanging Position Control: full digital PC-Robotcontrol, Type RCE Software: WIN 10 & Linux based System + igm Robot software K6 Welding process: 135 (GMAW), single-wire, Ø1.2 mm Welding power source: digital Invert Welding Power Source TPS 500i (500 A at 40% duty cycle) Robot periphery: Rotating boom for floor installation with 2.5 m boom length No. of Working-stations: 1 Working station: 3-axis L-Manipulator with lifting device with 2 tons nominal load capacity Security Technology: Pistol-Security-Shut-down in wrist axis Emergency Stop on Hand tablet, on Manipulators and Control Panel three-coloured warning light for the operating Status partition Security Door Technical indications, subject to error.
maximum number of results exceeded
please refine your search
