demag injection used for sale

Ref. no.: 17505 Hersteller: DEMAG Year of construction: 1997 Clamping unit Clamping force: 35 ton Opening stroke: 350 mm Distance between tie bars: 320 x 320 mm Mould height min.: 180 mm Platen size (h x v): 460 x 450 mm Injection unit Screw diameter: 18 mm Injection volume: 23 cm³ Shot weight: 20 g Injection pressure: 2868 bar Measurements and weight Dimensions: 3,3 x 1,2 x 2,0 m Machine weight: 2700 kg

Ref. no.: 17516 Hersteller: DEMAG Year of construction: 1998 Clamping unit Clamping force: 100 ton Opening stroke: 500 mm Distance between tie bars: 420 x 420 mm Mould height min.: 250 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 25 mm Injection volume: 61 cm³ Shot weight: 54 g Injection pressure: 2752 bar Measurements and weight Dimensions: 4,2 x 1,4 x 2,0 m Machine weight: 4200 kg Additional information & extras Core pull: 1 pcs

Indoor crane, crane, electric cable hoist, hoist, motor cable winch, motor winch, tackle, pulling winch, pulley -Manufacturer: Demag, electric chain hoist with chassis -Type: PK1N load capacity 250 kg -Main stroke: 4 m/min -Fine stroke: 2 m/min -Transport dimensions: 600/500/H230 mm -Weight: 23 kg

Compressor system composed of: Screw compressors Manufacturer: MANNESMANN DEMAG Type: 085 Rally Year of construction: 1992 Capacity: 7.9 m³ /min 3,000 min-1 45 kW Digital Screw compressors Manufacturer: MANNESMANN DEMAG Type: 085 Rally Year of construction: 1992 Capacity: 7.9 m³ /min Pressure: 75 bar 3,000 min-1 45 kW Compressed Air Refrigerant Dryer Manufacturer: MANNESMANN DEMAG Type: AD160AB Year of construction: 1993 Oil-water separator Type: ÖWAMAT 6 Compressed air tanks Manufacturer: LOHENNER Type: ZU47/21 Volume: 5,000 l Standing version Year of construction: 1993 Overpressure 11 bar

E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4 Fabr. No.: 63314301 Year of construction: 1992 Load capacity 1000 kg Hook travel 4.1 meters Distance suspension to load hook 480 mm Hauling speed 4 m/min. Fine lifting speed 1 m/min. Cable length operating bottle approx. 1.8 meters , mains connection 400 volts, 50 Hz. 2 load trains = 1000 kg - emergency stop weight 43 kg good condition; used

Offer 24042 Specifications: - Hoist DEMAG PK 2 N F, load capacity 250 kg - Load capacity gantry 250 kg - Hook height approx. 2850 mm - 2 lifting speeds 10.0 + 2.5 m/min - Manual trolley chassis - Passage between the driving stands approx. 3350 mm - Passage height lower edge of portal girders approx. 3220 mm - Driving beam approx. 1130 mm - 4 swivel castors - Total width approx. 4050 mm - Total depth approx. 1150 mm - Total height approx. 3420 mm - Drive 400 V - Total weight – crane + hoist approx. 250 kg

Machine: DEMAG EL EXIS S 300 / 720 -1450 Year: 2006 Control type: NC4 Number of hours: 42,000 Closing Closing force: 300 T Opening stroke: 670 mm Between columns: 710 x 830 mm Mini/maxi mold: 330mm Max distance between trays: 1380/1500 mm Injection: Screw diameter: 60 mm cm3: 763 Bars: 1970 General: Injection weight: 16 tonnes Length dimensions: 6.50 m Width dimensions: 2.0 m Height dimensions: 2.30 m Options: Cores: 1 2 BLOWS, 2 batteries on injection

All movements are fully frequency controlled with lifting magnet of 16 ton capacity with digital scales Kind of: overhead travelling crane Capacity: 20 ton Span: 18 800 mm Tackle speed: 0 > 8 m/min Rotationspeed: 0 > 60 m/min Displacementspeed: 0 > 40 m/min Weight: 24 ton Numbre of riggers : double rigger

Demag 20 ton x 27 500 mm Kind of: overhead travelling crane Capacity: 20 ton Span: 27 500 mm Tackle speed: 0,5 > 5 m/min Rotationspeed: 15 > 60 m/min Displacementspeed: 8 > 31,5 m/min Weight: 20,5 ton Numbre of riggers : double rigger

Demag 10 ton x 14 300 mm Kind of: overhead travelling crane Capacity: 10 ton Span: 14 300 mm Tackle speed: 0,6 > 4 m/min Rotationspeed: 5 > 20 m/min Displacementspeed: 6,3 > 40 m/min Weight: 4850 kg Numbre of riggers : single rigger

All movements are fully frequency controlled with lifting magnet of 16 ton capacity with digital scales Type: ZZKE Group FEM 4M Hoist DH 2050 H27 ZV3 4/1 Kind of: overhead travelling crane Capacity: 20 ton Span: 18 800 mm Tackle speed: 0 > 8 m/min Rotationspeed: 0 > 60 m/min Displacementspeed: 0 > 40 m/min Weight: 24 ton Numbre of riggers : double rigger

Producer DEMAG Type IntElect 80-370-100 NC 4 All electric Year 2006 Clamping unit Clamping force 80 ton Opening stroke 850 mm Distance between tie bars 370 X 370 mm Mould height min. 200 mm Mould height max. 510 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 22 mm Injection volume 37 cm³ Shot weight 32 g Injection pressure 2580 bar Measurements and weight Dimensions 4,50 X 1,28 X 1,95 m Machine weight 4750 kg

Producer DEMAG Type Demag IntElect 150/520-310 NC4 All electric Year 2005 Clamping unit Clamping force 150 ton Opening stroke 850 mm Distance between tie bars 520 X 520 mm Mould height min. 275 mm Injection unit Screw diameter 30 mm Injection volume 64 cm³ Shot weight 58 g Injection pressure 2500 bar Measurements and weight Dimensions 5,35 X 1,48 X 2,28 m Machine weight 6400 kg

Demag 10 ton x 11 360 mm Kind of: overhead travelling crane Capacity: 10 ton Span: 11 360 mm

Demag 5 ton x 12 570 mm Kind of: overhead travelling crane Capacity: 5 ton Span: 12 570 mm

Demag DH-hoist 5 ton x 12 507 mm Kind of: overhead travelling crane Capacity: 5 ton Span: 12 507 mm

Demag 5 ton x 11 365 mm Kind of: overhead travelling crane Capacity: 5 ton Span: 11 365 mm

with remote control with digital scales Kind of: overhead travelling crane Capacity: 2,5 ton + 2,5 ton Span: 18 520 mm

Demag 2 ton x 11 760 mm Kind of: overhead travelling crane Capacity: 2 ton Span: 11 760 mm

Demag 1 ton x 12 000 mm Kind of: overhead travelling crane Capacity: 1 ton Span: 12 000 mm

Specifications: - Load capacity 125 kg - Projection approx. 4200 mm - Heel height approx. ca. 3000 mm - Wall flange height approx. 760 mm - Swivel radius approx. 180 ° - Total length approx. 4400 mm Hoist Make : DEMAG Type: DKUN Machine number: 63354186 Year of manufacture: 2002 - Load capacity 125 kg - 2 lifting speeds approx. 2.0 / 2.0 m - Drive 400 V - Operation of the chain hoist via handheld remote probe - Swivelling the boom by hand - Total weight approx. 200 kg

Ref. no.: 18383 Hersteller: DEMAG Year of construction: 2008 Clamping unit Clamping force: 420 ton Opening stroke: 770 mm Distance between tie bars: 820 X 820 mm Mould height min.: 380 mm Mould height max.: 825 mm Platen size (h x v): 1200 X 1100 mm Injection unit Screw diameter: 60 mm Injection volume: 890 cm³ Shot weight: 810 g Injection pressure: 2420 bar Measurements and weight Dimensions: 8,2 X 2,2 X 2,4 m Machine weight: 22300 kg Additional information & extras Core pull: 4 pcs Robot Producer: Remak Year: 2008

Demag 5 ton x 11 360 mm Kind of: overhead travelling crane Capacity: 5 ton Span: 11 360 mm Numbre of riggers : single rigger

Demag 5 ton x 12 555 mm Kind of: overhead travelling crane Capacity: 5 ton Span: 12 555 mm Numbre of riggers : single rigger

clamping width: 5000 mm lifting capacity: 5 t weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping width: 22000 mm lifting capacity: 10 t weight of the machine ca.: 17 t only for export: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. no.: 17507 Hersteller: DEMAG Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg

Description: With ABUS electric chain hoist, maximum load 250 kg maximum capacity: 125 kg, throat: 5,000 mm, Approx. Onsite Dimension. (l x w x h): 5,700 x 700 x 3,600 mm, weight approx.: 500 kg

Electric hoist, crane, electric wire rope hoist, cable winch DEMAG type P 10 Fabr. No. 941 477 Year of manufacture 1962 Load capacity 2000 kg with 4 strings Lifting height 5 meters Hoisting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 volts, 50 Hz - Hoist DEMAG, type 19/11 K28P - Electric chassis DEMAG, type 13 / 6 K8 - 1 travel speed approx. 19 m/min - Chassis for double T-beams, beam width 120 to 180 mm - Load hook for 4 load trains - Control bottle for the hoist with approx. 2.5 meters cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg good condition; used

Hoist: DH 312 H12 Equipped with vaccuum pump + tank Kind of: overhead travelling crane Capacity: 5 ton Span: 16 350 mm Tackle speed: 1,3 & 8 m/min Numbre of riggers : single rigger

Suspension crane: 2 Stück: : 1. Kran : dimensions: 2500 x 3800 mm : 125 kg : 2. Kran: dimensions: 2500 x 4800 mm : 125 kg for expample for assembly work: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pillar-mounted slewing crane:: mobil arm length: ca. 2500 mm weight of the machine ca.: 4 t weight max. in kg: 125 kg bucket net weight: 430 kg bucket filling weight: mindestens 416 kg bucket - total weight: mindestens 846 kg max. wheel load: 391 kg max. support load: 544 kg : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pillar jib crane, hall crane, workstation crane -Manufacturer: ABUS, column jib crane type VS load capacity 1000 kg year of manufacture 1985 -Documents: crane inspection book, operating instructions, -Base plate: Ø 685 mm -Projection: 4,390 mm -Total height: 4,350 mm -Hook height: 3,140 mm -Chain hoist: DEMAG type PK5N with main stroke 5 m/min, built in 1973 -Chain length: 3300 mm -Transport dimensions: 950/4630/H1890 mm -Own weight: 1160 kg

maximum capacity: 250 kg, throat: 4,000 mm, Approx. Onsite Dimension. (l x w x h): 4,000 x 600 x 3,400 mm, weight approx.: 1,000 kg

Description: including Demag electric chain hoist, maximum load capacity 500 kg maximum capacity: 500 kg, throat: 4,000 mm, Approx. Onsite Dimension. (l x w x h): 4,600 x 600 x 4,750 mm, weight approx.: 1,000 kg

Pillar jib crane, hall crane, workstation crane -Manufacturer: ABUS, column jib crane type VS load capacity 500 kg -Documents: crane inspection book, operating instructions, -Base plate: Ø 710 mm -Projection: 3045 mm -Total height: 4,075 mm -Hook height: 3,305 mm -Chain hoist: DEMAG type DKUN5-500KV1F4 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Chain length: 3300 mm -Transport dimensions: 3850/810/H1110 mm -Own weight: 720 kg

Year: 1992 Operating hours: 1240 (as of 18.04.24) Ab. Total weight: 2000 kg

volume capacity: 5,63 m³/min suction: 1 bar pressure: 8 bar turning speeds: 3000 U/min engine output: 37 kW dimensions of machine L x W x H: 1,35 x 1,05 x 1,43 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control, radio remote control -Manufacturer: NBB, radio remote control with charger -Type: SL 48-2/MOV HF:SM 430 -Charger: LAD 0470 -Total dimensions: 230/210/H170 mm -Weight: 3.2 kg

load 1.000 - 2.000,-kg. More then 300 machines new and second hand on our seema .de

CONTROLS   PLC SIEMENS FEEDSTOCK STEEL STRIP   sheet width max.: 450 mm   sheet width min.: 90 mm   sheet thickness max.: 13 mm   sheet thickness min.: 2 mm   exterior coil diameter max.: 1900 mm   exterior coil diameter min.: 1100 mm   internal coil diameter max.: 760 mm   internal coil diameter min.: 610 mm PRODUCT (PROFILE, TUBE)   external diameter min.: 30 mm   external diameter max.: 140 mm   wall thickness min.: 2 mm   wall thickness max.: 12 mm   length min.: 4000 mm   lenght max.: 10000 mm LINE CHARACTERISTICS   Forming Process: rollforming   welding process: HF inductive   sawing process: travelling   speed max.: 65 m/min   feedstock transport direction: left to right Line consis ...

Sell a used demagnetization device Dimensions 22506001280mm with conveyor belt. Bandwidth 300mm Passage 400mm diameter, height conveyor belt top edge / height passage 280mm Tiede type ET400 8Kw 16A / 400V connection

used injection nozzle cleaning master construction year: In 1993 nominal width: DN200 nominal pressure: PN100 manual: no two machines same to construction exist

Injection pump in Exchange

Injection pump complete - used

Injection pump in Exchange

Injection pump complete - recon

Injection pump complete, used

Injection pump F & M - see picture