We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,574 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
used
10 pcs. crane runway length approx. 9.5m long HEA 200/190 (s=6 mm) Crane rails 40 x 40 mm Accessories Available on request at an additional cost: - Circuit rail VAHLE Assembly On request, installation/assembly/recommissioning, also constructive changes (wingspan, hoisting unit, etc.), can of course be carried out by us in accordance with relevant regulations or with acceptance(s) throughout Europe. Visit A visit is possible at any time and at short notice, whereby the crane can also be tested under electricity if necessary. to ask? Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info.torlach EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with track connection and container loading ! - O ...
used
Used Machine
used
2 pieces of crane bottles
used
Qty. 1 Second-hand skin pass mill Mfc.: Mannesmann Demag Sack Built: 1980’s Modernised in 1986 & 1993 Type: Duo Cold Rolling Mill – Non-Rev. Dia. 330 x 500 mm Material: Carbon steel, cold rolled and annealed Strip width: 80 - 470 mm Thickness entry: 4.0 mm Exit: 0.2 mm Decoiler Modernised in 1986 ID: 400 with segments 500 & 600 mm Spreading range: 370 – 420 mm Strip tension: 1300 – 65 daN Braking system: Generator Braking torque: max. 1300 daNm De-coiling speed: 2.5 m/sec. Coil cross section: 20 – 1880 mm² Coil weight per mm strip width max.: 10 kg Coil weight: 5.0 T Coil ID: 400 & 500 mm Coil OD: 600 – 1400 mm Roll dia.: 300 – 330 mm Roll length: 500 mm Roll force: 1850 – 2400 kN Min. roll force: 150 kN Hydraulic roll adjustment Adjustment stroke: 80 mm Adjustment speed: 1 – 3 mm/sec. Rolling speed: 2.5 m/sec. (150 m/min.) PLC system: ...
used
Key data: 31 , 2800
DC motor with brake 31.5 kW Mannesmann DEMAG GCH 140 D2/1105 used, from spare parts warehouse 1x Mannesmann Demag GCH 140 D2/1105 DC motor with brake and speedometer specifications: M7odp Type: GCH 140 D2/1105 375 V 31.5 kW 2800 rpm Brake: 19 - 30 Nm - please ask before purchase with Huebner TDP 0.2 T-4 Speedometer ATTENTION But the connector (Tacho - motor) is missing Wave length: 45 mm Shaft diameter: 32 mm Space requirement LxWxH: approx. 950 x 350 x 350 mm A total of 2 pieces are available The motors are all in a comparable state - the attached images are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8160
used
Key data: 31 , 2800
DC motor with brake 31.5 kW Mannesmann DEMAG GCH 140 D2/1105 used, from spare parts warehouse 1x Mannesmann Demag GCH 140 D2/1105 DC motor with brake and speedometer specifications: Type: GCH 140 D2/1105 375 V 31.5 kW 2800 rpm Brake: 19 - 30 Nm - please ask before purchase with Huebner TDP 0.2 T-4 speedometer Wave length: 45 mm Shaft diameter: 32 mm Space requirement LxWxH: approx. 950 x 350 x 350 mm A total of 6 pieces are available The motors are all in a comparable condition - the images used are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8159
used
DC motor with brake 31.5 kW Mannesmann DEMAG GCM 200 D2/0905 used, from spare parts warehouse 1x Mannesmann Demag GCM 200 D2/0905 DC motor with brake specifications: Type: GCM 200 D2/09005 365 V 31.5 kW 95.00 A 1800 rpm 60% ED Brake: 300.0 Nm Wave length: 115 mm Shaft diameter: 55 mm Space requirement LxWxH: approx. 1350 x 500 x 500 mm A total of 9 pieces are available - but not everyone is equipped with a speedometer (5 pieces available) please ask before purchase! The motors are all in a comparable condition - the images used are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8158
used
Offer 23357 THE CRANE CAN BE VIEWED AT THE D-03042 COTTBUS SITE BY APPOINTMENT. Technical data approx.: - Load capacity 2000 kg - Track gauge approx. 6.5 m - Operation via handheld remote probe - Hackenweg up to approx. 5000 mm - Reeving 4 / 1 - Vertical clearance approx. 600 mm - Wheelbase approx. 2000 mm - Driving beam length approx. 2360 mm - Speeds approx. - Cat chassis approx. 20 5 m/min - Hoist approx. 4 + 1.0 m/min - Crane chassis approx. 6.3 + 25 m/min - Total weight – crane approx. 1500 kg - without pictured chain hanger
used
Flat gear brake motor Gear motor Manufacturer: DEMAG Type: KBA112 B12/4 / KBA112B12 / 4 Detailed information on the manufacturers page, see pictures. Condition: New, can have traces of camp, comes from stock. Scope of delivery: see the pictures.
Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.
used
Molding machine of Mag Type: Ergotech 3500-3300, control panel: NC4 year: 2002 Clamping unit Clamping force t: 350 gap mm: 930 Holm dimension mm: 1250 x 1250 min/max height mm: 600-1200 Injection unit Screw diameter mm: 95 injection weight gr: 2260 Injection volume cm 3: 2509 spray pressure bar: 1316 Dimensions and weights Dimensions Lxwxh m: 5.8 x 3.1 x 2.65 machine weight kg: 34,000/7,000 Miscellaneous Europe 63 4 core cascade system PDF FILE PRINTING CONTACT
used
1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min
used
1 factory-tested, well preserved double girder crane Load capacity 5000 kg Span width 14.780 mm Hook path maximum approx. 8,000 mm Make RÖTTGER/Demag Workshop examination 2016 Floor control freely movable with DEMAG double girder trolley, Working speeds: Hoist approx. 0.8/8.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min
used
1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 14,200 mm Hook path about 8.000 mm Fabrikat DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min
used
1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 19.134 mm Hook path about 8.000 mm Fabrikat ABUS/DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min
used
2 factory-tested, well preserved single girder cranes Payload 7000 kg Wingspan approx. 16.650 mm Hook way approx. 4,000 mm Fabrikat DEMAG/MAN-SWF Workshop tests 1987/1991/2016 Cranes equipped with DEMAG and SWF monorail trolleys with short design, freely movable floor control Working speeds: Hoist CA. 0.3/3,1 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min
used
1 factory-tested double girder overhead travelling crane Payload 10.000 kg Wingspan currently and possible about 11,500 mm Hook path Max approx. 8,000 mm Make ABUS/Demag Workshop examination 2016 with separate DEMAG two-rail wind plant trolley & single-sided catwalk Working speeds: Hoist 2-tier Trolley gear 2-speed Crane chassis 2-speed
used
1 factory-tested, absolutely like new single angle crane Payload 10.000 kg Wingspan approx. 26.610 mm Hook path about 10,000 mm Make DEMAG Year of production/workshop test 2001/2016 Crane equipped with electric wire rope hoist moving on the side of the vehicle, cross and long travel frequency controlled remote control, Working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear (FU) approx. 0-30,0 m / min Crane chassis (FU) approx. 0-40.0 m / min
used
Demag Ergotech 160/520-600 Santosh and Demag Ergotech 120-320 System Injection Moulding Machine Prefer to sell both together Price for both machines
used
Molding machine of Mag Type: Ergotech 1300-12000 system, with rice robot control: NC4 year: 1996 Clamping unit Clamping force t: 1300 opening stroke mm: 1500 Holm dimension mm: 1500 x 1250 min/max height mm: 700/1400 Plate size: 2150 x 1880 injection unit Screw diameter mm: 130 injection weight gr: 6060 Injection volume cm 3: 6730 spray pressure bar: 1799 Dimensions and weights Dimensions Lxwxh m: 14.1 x 3.2 x 2.7 machine weight kg: 60,000/20,000 Miscellaneous Nuclear trains with rice robot EUROMAP 12
used
Demag hoist 10 ton Kind of: Hoist Capacity: 10 ton
used
1 pallet with various geared motors - see picture type BG10-11/D06LA4-TF BAUER Danfoss BG10-11/D06LA4-TF Gearboxnord SK33F-90L/4Bre16 (2 stu)
used
Mannesmann Demag compressor General repair 2004 Flow rate: 39.5 M ³/min, 2150 m ³/h Suction pressure: 1 bar Max pressure: 10 bar Speed: 1500 rpm Engine power: 250kW Pressure: 8.5 bar
used
various rope seam from 2 to 10 t; 2 pcs. hook bottles 25 t Next: cat SOWITSCH 2 t Steel Elektus R 12
used
Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650.5200 Model 2001 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot
used
Column-Mounted Crane DEMAG Capacity 500 kg Arm travel 3400 mm Manual arm rotation Column height 3000 mm Column base diameter 700 mm - with base discs (see photo) Electric hoist I beam dimensions: 220 x 100 mm (see photo) Total weight approx 2 T MACHINE IN OUR STOCK IN FRANCE.
used
E. - Chain hoist / hoist Offer number: 20056 Make: DEMAG Type: PK 1 N-F Machine number: 2388876 Built: 1978 Technical data: - Load capacity 250 kg - Lifting height - chain path approx. 2 m - 2 lifting speeds 1 + 4 m/min - top-sided hanging hoe - Operation of the chain hoist via hand remote scanner - Cable length hand remote scanner approx. 1.5 m - Drive 400 V - Weight approx. 20 kg
used
Injection unit Screw diameter: 35 mm Closing unit Closing force : 1000 kN Distance between tie-bars: 520 x 520 mm Other Equipment : FULL ELECTRIC machine NC5 control Commissioning : 2010 Tonnage : 100
Qty. 1 Second-hand strip casting production line Mfc.: EMA-Indutec, Marx, Air Blue, Güntner, Demag, G. Buchholz Built: 1992, 1995, 1997, 1999, 2000 Income material: Scrap Strip width: 300 mm Thickness: 10 – 20 mm – can be reduced! Plate length: 16 m can be extended! Coil weight: 1.5 T (steel) Scope of supply: Induction crucible furnace 20 kV Transfomer Cooling unit Casting machine Duo Mill Stand Coiler Run-out table Quenching Compressor
used
used
Description Mannesmann Demag hoist Max load : 200 Kg chain length: 3 m Power strip length: 6 m Power supply: 400V Power: 0.2 kW
Qty. 1 Second-hand spinner block Mfc.: Mannesmann Demag Built: 1981 Modernised: 1991-1995 Basket dia.: 1524 mm – 60 Pulling speed: max. 1000 m/min. Pulling force: 6.5 T at 250 m/min. Capacity: 6800 t/annum Entry tube dia.: up to 42 mm Wall thickness: up to 2.0 mm Exit tube dia.: 5 – 39 mm Wall thickness: min. 0.3 mm
used
Wall swivel crane Payload 250 kg Lifting height 5,000 mm Extension 6,500 mm Hallway control Electricallifting/Lowering Lifting speed 10 /2.5 m/min. Connection 380 Volt
used
weight max.: 10 t stroke: 9000 mm clamping width: 18000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Overhead traveling crane number: 94283910About usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
arm length: 4500 mm total column height: 4200 mm weight max. in kg: 500 kg bottom edge arm: 3200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
arm length: 4000 mm weight max. in kg: 500 kg swivelling range: 180 Grad total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m with wall bracket The techn. Data are manufacturer or operator information and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions apply. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
arm length: 4000 mm weight max. in kg: 500 kg swivelling range: . Grad total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 44 with wall bracket The techn. Data are manufacturer or operator information and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions apply. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
weight max.: 2 t stroke: . mm clamping width: 5600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 43 ONLY BRIDGEIN LIFTING GEARAbout usmore than 500 machines in the warehouseover 8500 m² storage area, crane capacity 70 tmore than 1000 items Accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
arm length: 4000 mm total column height: 4200 mm weight max. in kg: 500 kg bottom edge arm: 3200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
arm length: 5000 mm total column height: 4200 mm weight max. in kg: 500 kg bottom edge arm: 3200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
clamping force: -- kN injection volume: 230 cm³ screw diameter: 40 mm platen size: 475 x 475 mm Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: 2 Stück im Paket lifting capacity: Magnet 1: 15 t lifting capacity: Magnet 2: 9 t width: ca. 1.200 mm length: ca. 650 mm : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Lifting capacity: 2,5 t weight of the machine ca.: 80 kg : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Mannesmann Demag pallet train, type: DESTAMAT 1020 I, fabrication number: 582 896-02, year of construction: 1992, maximum capacity: 1000 kg (including 1 operator), dimensions: 4700 mm x 1400 mm x 20000 mm.
used
arm length: 2.200 mm height of hook: 2.600 mm weight of the machine ca.: 1,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
DEMAG OVERHEAD CRANE 40ton x 34 M SPAN + 5.2 ,M CANTILEVER MHE-DEMAG DOUBLE GIRDER GANTRY CRANE TYPE ZVPW YEAR 2011
used
OVERHEAD CRANE DEMAG 40 TON. X 18.6 M SPAN + 6.35 M CANTILEVER MHE - DEMAG DOUBLE GIRDER GANTRY CRANE, TYPE ZVPW, YEAR 2015.
used
used
Demag 250 kg crane system Payload: 250 kg Control GSA Type 4 Drive: Side: 3m Forward 2m Crane system has already been dismantled. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines