We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,579 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
LT 05/2020
used
Injection unit Screw diameter: 35 mm Calculated injection volume: 168 cm3 Material pressure: 2000 bar Closing unit Closing force : 1000 kN Min. mold thickness: 320 mm Other Commissioning: 2006 Tonnage: 100
used
Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).
used
Key data: 500 , 41 , 22
Manufacturer: Demag Type: Ergotech 35-115 viva Built: 1998 Control: NC 4 Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3 m x 1.1 m x 1.6 m Weight: 2500 kg Screen text: German Additional equipment Core train: x1
used
Key data: 800 , 149 , 35
Manufacturer: Demag Type: 80/420 - 310 concept Built: 2005 Control: NC 4 Control Type of closure: Hydraulish Closing force: 800 kN Tie bar ratio: 420 mm x 420 mm Plate size: 580 mm x 590 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 35 mm Lifting volume: 149 gram PS / 168.3 cc Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 8.8 kW Dimensions: 3.9 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German Optional extras Core train: x1
used
Key data: 1000 , 205 , 40
Manufacturer: Demag Type: 100/420 - 430 concept Built: 2004 Control: NC 4 Control Type of closure: Hydraulish Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 590 mm x 600 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 40 mm Lifting volume: 231 cc / 205 gram PS Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 11.1 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 4800 kg Screen text: German Optional extras Core train: x1 Air valve: x1 Robot interface
used
used
Description magnetic planes
used
Description Rotating Table Diameter: 1000 Table positions: 2 Hot channels: 8
used
used
used
Key data: 350 , 41 , 22
Manufacturer: Demag Type: Ergotech 35-115 viva Built: 2000 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3.1 m x 1.1 m x 1.6 m Weight: 1800 kg Screen text: German Additional equipment Picker Air valve: x1
used
DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Built: 2003 specifications Screw diameter [mm]: 35 Spray weight [g]: 150 Spray pressure [bar]: 1865 Closing force [kN]: 1000 Tie bar distance [mm]: 420x420 Clamping plate size [mm]: 600x600 Tool installation height min. [mm]: 200 control Control: ERGOcontrol Monitor: Yes Control cabinet: Yes Language: Yes other Power [kW]: 46.7 Engine hours [h]: 67455 Dimensions [m]: 4.6x1.5x2.1 Weight [kg]: 6500 - KNIESCHLIESSEINHEIT - CORE TRAIN - EUROMAP - AIR VALVE
used
used
used
Key data: 1500 , 210 , 40
Manufacturer: Demag Type: 150/475 - 440 concept Year of construction: 1999 Control: NC 4 Control Locking type: Knee lever Closing force: 1500 kN Tie bar spacing: 475 mm x 450 mm Plate size: 690 mm x 660 mm WZ Installation height: min 230 max 460 mm Opening distance: 450 mm Plate spacing max: 910 mm Screw: 40 mm Lifting volume: 231 ccm / 210 gram PS Injection pressure: 1855 bar general Engine: 22 kW Heater: 11.7 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 6600 kg Screen text: German Optional extras Core train: x1 central lubrication Air valve Robot interface
used
Key data: 350 , 78 , 30
Manufacturer: Demag Type: Ergotech 35/320 - 120 concept Year of construction: 2005 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar spacing: 320 mm x 320 mm Plate size: 460 mm x 450 mm Tool height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 30 mm Lifting volume: 88.3 cc / 78 gram PS Injection pressure: 1393 bar general Engine: 11 kW Heating: 8.3 kW Dimensions: 3.4 m x 1.2 m x 1.8 m Weight: 2750 kg Screen text: German Additional equipment Robot interface Core train: x1 Air valve: x1 Temperature control point for hot duct
used
DEMAG EXTRA 200-840 ECQ (129) Without funnel Year of construction: 2007 Brand: Demag Specifications Spray weight: 400 g Clamping force 2000 kN Screw diameter: 50 mm Spray pressure: 1646 bar Spar spacing: 580 x 580 mm Clamping plate size: 860 x 860 mm Power: 45 kW Weight: 9000 kg Dimensions: 6.7 x 1.8 m Toggle lever locking unit: Yes
used
screw size: mm injection shot weight in Polysterol: g/PS closing pressure:1100 kN
used
screw size: mm injection shot weight in Polysterol: g/PS closing pressure: kN
used
screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN
used
screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:1250 kN
used
screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:1250 kN
used
Closing force: 35t, max. shot weight: 47g, opening stroke: 530mm, installation height: 180-350mm, distance between the bars: 280x280mm, weight: 1.8t.
used
Closing force: 50t, max. shot weight: 95g, opening stroke: 610mm, installation height: 210-400mm, distance between the bars: 350x350mm, weight: 2.5t.
used
Closing force: 110t, max. shot weight: 280g, opening stroke: 850mm, installation height: 250-695mm, distance between the bars: 450x450mm, weight: 6.1t, with Handling Wittmann W621-480-NC4.
used
Clamping force: 420t, screw diameter: 70/ 15mm, injection volume: 1212/ 292cm³, length: 7900mm, width: 2200mm, height: 5000mm, weight: 25t, with robot.
used
Screw diameter: 95mm, distance between the bars: 900x800mm, max. opening path: 810mm, max. tool weight: 6.7t, operational pressure: 190bar, weight: 24t, with Industrial Robot FANUC M-16iL.
used
Mannesmann Demag D60 - 182 NC3 Plastic injection moulding machine
used
Hydraulic pressure: 210bar, weight: 3.1t.
used
Hydraulic pressure: 210bar, weight: 3.7t.
used
Operational pressure: 210bar, weight: 4t, with documentation, without accessories.
used
Clamping force 350t, clear tie bar width: 710mm, operating pressure: 190bar, weight: 16t, with documentation, an inspection is possible.
used
Clamping force 250t, clear tie bar width: 560mm, operating pressure: 190bar, weight: 10.7t, with documentation, an inspection is possible.
used
There are two Injection Moulding Machines Demag Ergotech System 250/630-1450 available, clamping force 250t, clear tie bar width: 630mm, operating pressure: 190bar, weight: 13.1t, year of construction machine 1/ 2: 2001/ 2006, with documentation, an inspection is possible.
used
Screw diameter: 35mm, operating hours: 73,500h, on-site inspection is possible.
used
BEING NEGOTIATED Sumitomo Demag 280 ton Systec SP 280/630-840 year of manufacture 2014 280 Ton Clamp 2800kn Tie Bar Dist 630 Injection unit 840 Made in Schwaig, Germany 400v 50hz Exworks South America
used
screw size: unbkt mm injection shot weight in Polysterol: unbkt g/PS closing pressure: 100 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 3500 , 60
warehouse no.: 503071 manufacturer: DEMAG type: Concept 350-710-1450 controller: NC4 year of construction: 2003 operation hours: 62370 h clamping force: 3500 kN distance between tie-bars h x v: 710 x 630 mm size of mould plates h x v: 1040 x 950 mm min. mould height: 330 mm max. mould height: 830 mm max. open daylight: 1385 mm opening stroke: 675 mm screw diameter: 60 mm swept volume: 763 ccm injection pressure: 1905 bar equipment included: 16x control for hotrunner screen text german CEE-socket 16A core pulling hydraulically 1x air valve moveable WAP machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 interface EUROMAP 63 Schuko-socket 10A measures of machine l x w x h: 6.5m x 2m x 2.3m total weight: 15300KG
used
warehouse no.: 503174 manufacturer: DEMAG type: ERGOtech 1000-420-310 controller: NC 4 year of construction: 2002 clamping force: 1000 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 600 x 600 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 35 mm swept volume: 168 ccm injection pressure: 2020 bar equipment included screen text german CEE-socket 16A complact flash drive core pulling hydraulically 1x air valve 1x machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A Schuko-socket 10A measures of machine l x w x h: 4.2m x 1.4m x 1.8m total weight: 3700KG technical data robot-system handling type: Linear manufacture: Wittmann controller: W7 ...
used
Screw diameter: 30 mm Displacement: 74 cm³Injection weight in polystyrene: 66 g/hp Injection pressure: 2,020 bar Clamping force: 50 t Lights tie bar distance H x V: 420 x 370 mm Tool installation height min.: 200 mm Opening distance: 340 mm CONTROL: NC4 Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 1x Pump drive power: --- Total connection load: 33 kW Total weight: 4,750 kg Dimensions L x W x H: 4.3 x 1.1 x 2.0 m m m m Terms of payment: 100 % before taking over the machine, strictly net
used
Production year: 2004 Control: NC4 Injection unit: .../200 Screw diameter: 25 mm Specific injection pressure: 2400 bar Injection volume: 61 cc Injection weight: 54 g Tool closure system: .../500 Clamping force: 50 t Tool plate dimensions: 520 x 520 mm Distance between columns: 355 x 355 mm Tool height: 210 mm Opening distance: 400 mm Max.Distance plates: 610 mm General data: Pick-up date: Immediate Dimensions (m) LxWxH: 3.7 m x 1.4 m x 1.8 m Weight: 2900 kg
used
Injection moulding machine Demag Ergotech 5000-5200 Parameters: Production year: 2001 Control: NC10 Injection unit: .../5200 Screw diameter: 95 mm Specific injection pressure: 1550 bar Injection volume: 2835 ccm Injection weight: 2550 g Tool closure system: 5000/... Clamping force: 500 t Tool plate dimensions: 1300 x 1200 mm Distance between columns: 900 x 800 mm Tool height: 400...880 mm Opening distance: 810 mm Maximum plate distance: 1690 mm Ejector stroke: 230 mm General data: Dimensions (m) LxWxH: 9,40 x 2,30 x 2,50 m Instrumentation: 6 x pneumatic cascade 2 x Hydraulic Core
used
We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Injection moulding machine Demag Ergotech 25/280-35 Parameters: Production year: 2006 Injection unit: .../35 Screw diameter: 18 mm Specific injection pressure: 2099 bar Injection weight: 20 g Pump motor power: 7.5 kW Cylinder heating band power: 5 kW Tool closure system: 250/... Clamping force: 25 t Tool plate dimensions: 460 x 450 mm Distance between columns: 280 x 280 mm Ejector stroke: 100 mm General data: Weight: 2520 kg Dimensions (m) LxWxH: 3,3 x 1,2 x 2,0 m Net price given. We invite you to our other auctions where you will find other peripherals and injection machines. europnet.eu
used
Key data: 5000 , 2550 , 95
Year of construction: 2001 Clamping force: 5,000 KN with 6-axis Fanuc robot M16i , Year of construction 2001 incl. conveyor belt and safety fence Equipment: Screw: diameter 95 mm Injection weight: 2,550 gr./hp Ejector stroke: 230 mm Tie bar spacing: 900 x 800 mm Installation height min. – max.: 400 – 880 mm Max. distance between plates: 1,690 mm Opening travel max.: 810 mm Max. tool weight: 6,700 KG 6-fold cascade pneumatic 2 core pulls Robot interface Injection pressure max. 1,550 bar Control NC10
used
CLAMPING FORCE: 50TON PLATEN SIZES: 540 X 540MM D.B.T.B: 355 X 355MM MIN MOULD HEIGHT: 210MM MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 610MM SCREW DIAMETER: 35MM INJECTION PRESSURE: 1890BAR STROKE VOLUME: 144CM3 SHOT WEIGHT (P/S): 128GR CONTROLS: NC4 MOTOR: 11KW HEATING CAPACITY: 7.5KW SCREW DRIVE: HYDRAULIC CORE PULLING: 1 AIR VALVES: 1
used
CLAMPING FORCE: 250TON PLATEN SIZES: 930 X 930MM D.B.T.B: 630 X 630MM MIN MOULD HEIGHT: 330MM MOULD OPENING STROKE: 670MM MAX DAYLIGHT: 1380MM EJECTOR STROKE: 200MM SCREW DIAMETER: 50MM INJECTION PRESSURE: 3032BAR STROKE VOLUME: 530CM3 SHOT WEIGHT (P/S): 482GR CONTROLS: NC5 SCREW DRIVE: ELECTRIC AIR CIRCUIT: 4
used
For sale are 3 Sumitomo Demag IntElect 150/520-410 injection molding machines in good technical condition, complete with hydraulic stations, Witmann Battenfeld W-721 robots (3 axes) and robot work area fences. Stored in a heated room. Unfortunately, there is no way to see the operating time, because... The injection molding machines are not connected to the power supply. Clamping unit 1500. Closing force 1500 kN, holding force 1650 kN, opening stroke max. 495 mm, built-in mold height min/max 275/585 mm, max. the distance between the plates for clamping the mold is 1080 mm, the plates for clamping the molds are 770x770 mm, the clearance between the columns is 520x520 mm, the weight of the mold is max. 1700 kg, which makes the weight of the mold on the movable clamping plate 1150 kg. Ejector. ejector stroke - 125 mm, ejection force 35 kN, ejector return force - 35 kN Injection unit 41 ...
used
INJECTION MOULDING MACHINE DEMAG DC320 with the following characteristics: Press: 350 ton Platens : 700x700mm Capacity: 2.5kg/shot The machine is in top excellent condition with only a few months of operation time. - Condition: top excellent - Can be shown under power - Reason for sale: commercial Screw diameter: 45mm Tie bar spacing (H) & (V): 720 x 650 mm Shot volume in cm3: 360 cc Pressure on material: 2400 bar
used
Control type: NC4 Closing force: 200T Opening stroke: 500 mm Between columns: 610 x 610 mm Tray dimensions: 830 X 830 mm Mini / maxi mold: 310/660 mm Max distance between plates: 1235 mm Screw diameter: 45/25 mm Screw length: 20 D cm3: 322/61 Bars: 1900/2006 Motor power: 30KW Heating power: 13KW Closing weight: 10T1 Cores: 2 Robot interface Bi metal Others: turntable, 2 blow guns