demag hoist used for sale

This DEMAG Systec 210/580-840 was manufactured in 2019. Its a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information.

Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Friction wheel Demag type: RF180 -Carrier width: 120 mm -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Handover in the current condition as viewed -1x wheel missing (photos) -Friction wheel Demag type: 13/8RF8-2 -Carrier width: 120 mm -for narrow flange beams: IPE240 (120 mm wide) -the chassis are inserted into a steel beam -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

2 x injection moulding machines EL - EXIS 200 S incl. Wittmann robot cell for removal and feeding ( No IML ) EL - EXIS 300 S incl. Wittmann robot cell for removal and stacking ( no IML )

Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer engine DEMAG type: KBA-112-MB-6 -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 670/300/H500 mm -Weight: 102 kg

Manufacturer: Demag Model: EL-EXIS S 250/630-1450 Year of Manufacture: 2005 Clamping Unit - Clamping force: 2500 kN - Clamping holding force: 2750 kN - Opening stroke max.: 675 mm - Mold installation height min.: 330 mm - Mold installation height max.: 710 mm (830 mm with extended configuration) - Max. distance between mold clamping platens: 1385 mm (1505 mm with extended configuration) - Mold clamping platens (H x V): 950 x 950 mm - Clear tie-bar spacing (H x V): 630 x 630 mm - Mold weight max.: 3300 kg - Max. weight portion on moving mold clamping platen: 2200 kg Hydraulic Ejector - Ejector stroke: 200 mm - - Ejector force: 69 kN - - Ejector retraction force: 31 kN Find more here - .ucymachines/ Contact us at - sales@ucymachines

Offered is a Demag single-girder light crane system in portal design. Crane runway length: 10000mm, span: 8500mm, 1x crane girder incl. 2x crane travel units, hook travel: 5.0m, hoist: Demag electric chain hoist type 620S/DC-Com, load capacity: 1000kg, complete steel structure 6 columns incl. base plates, 2 crane runways, 1 crane girder. Inspection possible by arrangement.

Load capacity 1000 kg Total height – 455 cm (505 cm) Free space under the boom – 360 cm Hook path - 300 cm Column – 455 or 505 cm (to choose from) Flange – 70 x 70 x 3.5 cm Chain hoist GIS 800 kg, year 2020 - with warranty Total weight – 850 kg Colour – RAL 7044 Year of construction – 1987 – after overhaul – Documentation

Column jib crane, overhead crane, workstation crane -Manufacturer: DEMAG, Column jib crane, lifting capacity 250 kg -Base plate: 550 x 550 mm -Protrusion: 2,860 mm -Total height: 5110 mm -Hook height: 3170 mm -Swivel range: 270° -Chain hoist: can be supplied for an additional charge -Transport dimensions: 5110/800/H550 mm -Weight: 380 kg

Control cabinet and distribution board construction, busbars, distribution cabinet, power distributor, housing, universal housing, electronics housing, distribution box -Manufacturer: Mannesmann Demag, electronics housing from injection molding machine Demag D 100-275 NC -Ident. No.: 06594865 -Dimensions: 200/200/H90 mm -Weight: 1.1 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control electronic modules from injection molding machine Demag D 100-275 NC -Card holder: Murrelektronik 630055 -Control card: Philips 9404 780 020 -Individual components: see photos -Price/sale: complete -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Mannesmann Demag, control electronic modules from injection molding machine D 100-275 NC -Card holder: Murrelektronik 630055 -Control card: Philips 9404 780 020 -Individual components: see photos -Price/sale: complete -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board, analog distribution card, load amplifier, load amplifier -Manufacturer: bg Bernd Grigat, load amplifier from injection molding machine Demag D 100-275 NC -Type: QVA 30/1 Item No.: 2442/00 -Quantity: 2x amplifiers available -Price per piece -Total dimensions: 100/40/H110 mm -Weight: 0.3 kg/pc.

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Tramag Fürth, transformer type CST from injection molding machine Demag D 100-275 NC -A-No.: 80258 ID.No. 06520365 -Power: 1100 VA -Technical data: see photo nameplate -Dimensions: 240/120/H220 mm -Weight: 16 kg

CNC control, control panel, control desk, operating unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit board, analog distribution card, distribution print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Siemens, control electronic modules from injection molding machine Demag D 100-275 NC -Power supply: Type E220 G5/15WRGD -Adapter capsule: Type 6ES5 491-0LB11 5 pieces -Interface modules: 6ES5 306-7LA11 -Subrack: 6ES5 700-2LA11 -Individual components: see photos -Price/Sale: complete -Dimensions total: 485/220/H305 mm -Weight: 12.3 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Siemens, control electronic modules from injection molding machine Demag D 100-275 NC -Interface modules: 6ES5 306-7LA11 -Digital output: 6ES5 454-7LB11 5 pieces -Digital input: 6ES5 430-7LA11 3 pieces -Subrack: 6ES5 701-2LA12 -Individual components: see photos -Price/sale: complete -Total dimensions: 480/210/H305 mm -Weight: 11.2kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Siemens, control electronic modules from injection molding machine Demag D 100-275 NC -Interface modules: 6ES5 306-7LA11 -Digital input: 6ES5 430-7LA11 2 pieces -Digital output: 6ES5 454-7LB11 5 pieces -Subrack: 6ES5 701-2LA11 -Individual components: see photos -Price/sale: complete -Total dimensions: 480/210/H305 mm -Weight: 10.8kg

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Crane chassis: Beam width: up to 175 mm -Load capacity: 1000 kg -Dimensions: see technical drawing in the photos -Number: 8x chassis available Price: per piece -Dimensions: 245/200/H190 mm -Weight: 7.6 kg/pc.

Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Handover: in its current condition as inspected -Housing damaged, cable without connector, see photos -Manufacturer: Demag, crane remote control control unit -Cable length: 2.0 m / 5-core -Dimensions: 500/300/H100 mm -Weight: 1.9 kg

indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 9000 mm -Carrier: IPB 320, HEB 320 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Delivery/Price: complete -Weight: 970 kg/piece / 1940 kg total -Transport dimensions: 9130/600/H380 mm -Weight: 1940 kg/total

Indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T girders, IPB steel girders -Steel beams: for bridge crane, length 2x 13400 mm / 2x 11000 mm / 2x 7970 mm -Carrier: IPB 340, HEB 340 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Shipping/Price: in pairs or complete -Weight: 1650/1360/950 kg/pc. / 7920 kg total

indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 13400 mm / 2x 7980 mm -Carrier: IPB 280, HEB 280 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Distribution/Price: in pairs or complete -Weight: 1270/720 kg/piece / 3980 kg total

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Demag / CompAir, screw compressor type 350WS / EK285NK without drive motor -Volume flow: 35.1 m³/min -Max. pressure: 7 bar -Drive shaft: Ø 90 x 120 mm -Individual components: see photos -Dimensions: 1100/670/H1000 mm -Weight: 1032 kg

CPU module, electronic modules, PLC module, plug-in card circuit board, circuit board, board, digital input module, -Printed circuit board: Electronic module from screw compressor Demag type 350WS -Type designations: CPU-MK1 V1.1 MK1-ADU V1.1 MK1 Digital-Input V1.1 MK1 REMIX V1 0205 00111 -Dimensions: 270/170/H130 mm -Weight: 2.6 kg

Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer-Motor DEMAG Type: ZBF80A8/2B020 -Manufacturer gearbox DEMAG Type: AMK20DD -Power: 0.13/0.50 kW -Speed: 45/131 rpm -Design: M0-30-1/16.4 -Hollow shaft diameter: toothed Ø 28/30 mm -Protection class: IP54 -Dimensions: 505/210/H220 mm -Weight: 42.3 kg

Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 52 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1 piece available -Dimensions: 220/123/H160 mm -Weight: 9 kg

Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 60 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 2x wheel block available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.7 kg/piece

Friction wheel, running wheel for bridge crane, bridge crane, overhead crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, Wheel block for crane chassis -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 48 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.5 kg/pc.

Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Ø 122 mm / rail width intermediate dimension 63 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1x wheel block available -Dimensions: 220/97/H160 mm -Weight: 8.5 kg

Electric motor, three-phase motor for gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor unfortunately without type designation -Power: kW -Speed: 1485 rpm -Shaft: Ø 24 x025 mm -Design: B14 -Dimensions: 370/180/H250 mm -Weight 19.8 kg

Pillar jib crane, indoor crane, workstation crane -Manufacturer: Demag, pillar jib crane load capacity 125 kg -Base plate: 350 x 350 mm -Thrust: 2,000 mm -Total height: 1,780 mm -Hook height: 840 mm -Chain hoist: DEMAG type DC-Com 1 125 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 540/2100/H500 mm -Own weight: 176 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 6 -Connector: 16-pin -Crane remote control: 2 steps below the switch each -Transport dimensions: 870/360/H140 mm -Weight: 6.1 kg

Double girder traveling crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system -with 2x electric cable winches -Load capacity: 2 x 1600 kg -Bridge load capacity: 3.2 tons -Wingspan: 6.4 m -Hallway service -Dimensions: 2000/6400/H1000 mm -Weight: approx. 2000 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Handover: in its current condition as seen, see photos -Condition: the switching elements are missing -Manufacturer: Demag, control switch for crane remote control with cable -Type: DSE -Connector: 16-pin -Transport dimensions: 600/330/H140 mm -Weight: 3.5 kg

Overhead crane, crane, trolley, crane running gear, crane trolley, girder trolley, head girder for bridge cranes, ceiling crane head girder, head girder single girder bridge crane -Manufacturer: Demag, 1 set of end girders for single girder bridge crane -Type: ELV -Load capacity: kg -Carrying rollers: Ø 160 mm -Hole spacing: 290 mm Ø 20 mm / Dimensions see photos -Transport dimensions: 2355/365/H245 mm -Weight: 302 kg

Demag 1000kg 13/3PF4, Electr. Trolley + C Rail Cable Cable Trolley Chain Hoist Total weight approx. 80 to 120 kg. Good used condition, full function. The cover caps on the hand control unit are missing. Ride back and forth at one speed each. Lifting and lowering at two speeds each. There are 3 C rails with associated connectors. Total length approx. 14m. Including flat cables and sufficient cable trolleys that run in the C rails. Except for the H-beam, the system is then complete.

Key data: 600 kN, 94 g/PS, 30 mm

Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4

Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details.

Two DEMAG MC 85 mobile cranes are available, with a displacement of 5,652 cm³ and a weight of 20 tons, complete with documentation. On-site inspection is possible.

Key data: 10000 kN, 110 mm

DEMAG Ergotech 1000/1400-8000 -1000T Year : 2001 Screw diameter : 110mm Plasticizing capacity (g/s): 130 Injection capacity (cm³/s): 780 Injection pressure (bar): 1815 bar Injection volume (cm³): 4370 cm³ Mold thickness (min/max): 500 x 1200mm Distance between tiebars : 1400 x 1120mm Platen dimensions (h x w): 1950 x 1670mm Closing stroke: 1250mm Centering ring diameter: 250mm Ejection passage diameter: 160mm Ejection stroke: 350mm Optional: Sequential injection, 6 hydraulic cores, 2 pneumatic cores, ejection plate, and bimetallic sleeve screw. + Robot Star ref TX 1800 EMI

Clamping force: 3000kN, locking force: 3300kN, max. opening stroke: 670mm, min. mould installation height: 330mm, max. mould installation height: 710mm, max. distance between mould platens: 1380mm, mould platen dimensions: 1040x950mm, distance between tie bars: 720x650mm, max. mould weight: 4.7t, max. weight on moving mould platen: 2.4t, max. weight on fixed mould platen: 3.6t, ejector stroke: 200mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 50mm, L/D ratio: 20, injection pressure at 400°C: 2426bar, shot volume: 530cm³, shot weight (PS): 480g, max. metering stroke: 270mm, max. nozzle stroke: 470mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 110kN, installed barrel heating capacity: 14.8kW, material hopper capacity: 110l, oil tank capacity: 700l, electric screw drive: 38kW, electric clamping unit drive: 37kW, pump unit power: 22kW, total installed p ...

Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous  ...

Key data: 2500 kN

Demag Ergotech Compact 250-80 Year of Make: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g Spray pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Clamping force: 25 t Tiebar spacing: 280x280 mm Size of the clamping plates: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. ...

Key data: 500 kN

Sumitomo Demag IntElekt 50/370-200 / Electric Machine Year of Make: 2009 Injection unit: Screw diameter: 25 mm Injection weight: 39 g Spray pressure: 1580 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 370x370 mm Size of the clamping plates: 520x570 mm Ejector: electric Clamping unit: toggle lever Control: NC5 - Touch Screen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Control with hot runners Hardened injection unit - Bimetal Central lubrication It is possible to change the screw diameter Dimensions: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected m ...

Key data: 800 kN

Demag Ergotech System 80/420-430 Year of Make: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Spray pressure: 2020 bar Dosing volume: 231 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/Width/Height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 1000 kN

Sumitomo Demag Systec 100/420-310 with the Sepro SR SDR11 S3 TRANS robot / hybrid machine Year of Make: 2013 Injection unit: Screw diameter: 35 mm Injection weight: 149 g Spray pressure: 2024 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Sepro SR SDR11 S3 TRANS Year of Make: 2013 5-axis robot: 3 axes are driven by servo motors (el ...

Key data: 3500 kN

Sumitomo Demag Systec 350/720-2300 / Production line with the Wittmann-Demag DR853 robot Year of Make: 2015 Injection unit: Screw diameter: 70 mm Injection weight: 1103 g Spray pressure: 1877 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 350 t Tiebar spacing: 720x720 mm Size of the clamping plates: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Control with air valve Control with hot runners x 5 Hardened injection unit - Bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable power Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Wittmann-Demag DR853 Year of Make: 2016 6-axis robot: 5 axes are driven by servo motors (electric) ...

Key data: 3500 kN

Sumitomo Demag Systec 350/720-2300 / Production line with the Wittmann-Demag DR833 robot Year of Make: 2012 Injection unit: Screw diameter: 70 mm Injection weight: 1103 g Spray pressure: 1877 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 350 t Tiebar spacing: 720x720 mm Size of the clamping plates: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull controlled with proportional valve x 1 Control with hot runners x 5 Hardened injection unit - Bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable power Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Wittmann-Demag DR833 Year of Make: 2011 4-axis  ...

Hydraulic injection moulding machine manufactured in 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar distance of 520 mm. The machine includes an injection unit with a screw diameter of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 160/520-600 machine we have for sale. Contact us for further details.