demag h 45 used for sale

Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 60 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 2x wheel block available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.7 kg/piece

Friction wheel, running wheel for bridge crane, bridge crane, overhead crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, Wheel block for crane chassis -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 48 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.5 kg/pc.

Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Ø 122 mm / rail width intermediate dimension 63 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1x wheel block available -Dimensions: 220/97/H160 mm -Weight: 8.5 kg

Electric motor, three-phase motor for gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor unfortunately without type designation -Power: kW -Speed: 1485 rpm -Shaft: Ø 24 x025 mm -Design: B14 -Dimensions: 370/180/H250 mm -Weight 19.8 kg

Bridge crane, indoor crane, disc brake, crane brake, disc, drum and storm brakes, overhead crane brake, brake ring, conical brake disc, conical brake disc, conical brake ring -Manufacturer: Demag, conical brake disc conical brake ring -Type: 089 762 84 -Mounting: Shaft Ø 46/50 mm -Bolt circle: Ø 70 mm M10 -Dimensions: see photos -Number: 2x brake disc available -Price: per piece -Dimensions: Ø 288 x 90 mm -Weight: 6.3 kg/piece

Pillar jib crane, indoor crane, workstation crane -Manufacturer: Demag, pillar jib crane load capacity 125 kg -Base plate: 350 x 350 mm -Thrust: 2,000 mm -Total height: 1,780 mm -Hook height: 840 mm -Chain hoist: DEMAG type DC-Com 1 125 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 540/2100/H500 mm -Own weight: 176 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 6 -Connector: 16-pin -Crane remote control: 2 steps below the switch each -Transport dimensions: 870/360/H140 mm -Weight: 6.1 kg

Double girder traveling crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system -with 2x electric cable winches -Load capacity: 2 x 1600 kg -Bridge load capacity: 3.2 tons -Wingspan: 6.4 m -Hallway service -Dimensions: 2000/6400/H1000 mm -Weight: approx. 2000 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Handover: in its current condition as seen, see photos -Condition: the switching elements are missing -Manufacturer: Demag, control switch for crane remote control with cable -Type: DSE -Connector: 16-pin -Transport dimensions: 600/330/H140 mm -Weight: 3.5 kg

Demag 1000kg 13/3PF4, Electr. Trolley + C Rail Cable Cable Trolley Chain Hoist Total weight approx. 80 to 120 kg. Good used condition, full function. The cover caps on the hand control unit are missing. Ride back and forth at one speed each. Lifting and lowering at two speeds each. There are 3 C rails with associated connectors. Total length approx. 14m. Including flat cables and sufficient cable trolleys that run in the C rails. Except for the H-beam, the system is then complete.

Key data: 4200 kN, 1090 g/PS, 70 mm

Demag Ergotech 420/800 2300 with embossing function and Robot Wittmann DR 633/CNC 6-316 Prices are at: inventar-verkauf.de/id/alesco Details: Clamping force: 4200 KN Handlebar width: 800 x 710 mm Mold opening: 710 mm Control Ergocontrol NC 4 Connected load: 68KW Total dimensions: 7.9 x 2.2 x 2.5 m Total weight: 21.0 t Accessories/Equipment: Robot Wittmann DR 633/CNC 6 - 316 (XxYxZ) 900 x 1600 x 3000 servo with support and enclosure 2-fold core pull 2 I/O Embossing function retrofitted 2 x Injection Unit: Injection Unit 1 Weft volume: 891 cm Weft weight: 800gr (polystyrene) Screw diameter 60mm Injection pressure 2420 bar Injection Unit 2 Weft volume: 1212 cm Weft weight: 1090gr (polystyrene) Screw diameter 70 mm Injection pressure 1877 bar WITHOUT COOKING VACUUM CLEANER and CLAMPING DEVICE.

Key data: 600 kN, 94 g/PS, 30 mm

Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4

Key data: 600 kN, 94 g/PS, 30 mm

Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4

Additional title: Slewing crane, Maximum load: 2000 kg, Reach: 4 m , Lifting height: 3 m, Length: 4,00 m, Height: 4,61 m

B&A REF:  9314 TON: 420 SCREW DIAMETER:  70MM SHOT WEIGHT:  1090 STROKE VOLUME:  1212CM3 INJECTION PRESSURE:  1877AR PLATEN SIZES:  1200 X 1100MM DBTB: 810 X 710MM MIN MOULD HEIGHT:  380MM MAX MOULD HEIGHT: 820MM MOULD OPENING STROKE:  710MM MAX DAYLIGHT:  1530MM EJECTOR STROKE:  230MM CONTROLS:  NC4 CORE PULLING: 2 AIR VALVES: 3 MOTOR: 45 HEATING CAPACITY: 27KW ROBOT INTERFACE: EUROMAP SCREW DRIVE:   HYDRAULIC

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: Orsta, hydraulic cylinder type 4514-3328/0 Pn12 -Stroke: 404 mm -Piston rod: Ø 35 mm -Cylinder: Outer Ø 106 mm -Mounting: Bolt circle Ø 180 mm -Dimensions: 910/220/H220 mm -Weight: 30 kg

Tailstock for lathe, counter bearing for dividing head, dividing head -from: Schaublin 102 -Collet chuck: W25 -Drawing: in the photos -Dimensions: 450/360/H170 mm -Weight: 11 kg

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 450 x 450 mm -Depth: 250 mm -Edge: 18 mm -Drain: Ø 60 mm -Quantity: 15x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 3.7 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 35 mm -Piston rod: Ø 32 mm -Stroke: 450 mm -Quantity: 1 piece available -Dimensions: 645/55/H70 mm -Weight: 6.7 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 450 x 450 mm -Depth: 250 mm -Edge: mm -Dimensions: 500/500/H250 mm -Weight: 7 kg

Hand wash basin, wash basin, welded-in basin, welded-in swivel basin -Stainless steel sink -Internal dimensions: 600 x 450 mm -Depth: 300 mm -Edge: 18 mm -Number: 11x available -Hole bottom left: 2/Hole bottom right: 9 -Price: per piece -Dimensions: 640/500/H300 mm -Weight: 5.1 kg

Clamping plate, welding table, welding table, marking plate -Width: 450 mm -Length: 400 mm -Height: 50 -with fitting bore and threaded holes: M12 (threaded insert M16 x 1.5) -Weight: 60 kg

Manufacturing year : 1992/93 BAR: 1500 KW: 450 RPM: 305 l/min: 150

Manufacturer: Hermann Schwammberger Model: DLMEh 450 / 50 / 3250 Year of Manufacture : 2017 Type of Machine : Hardening furnace strip line Heating Power: 96 kW Total Current: 136 A Rated Temperature: 1,120 °C Certification: CE Find more here - / Contact us at -

CONTROLS   PLC PRESS DESIGN   drive system: hydraulic   quick die change system: yes SLIDE   total force (nominal): 450 to   stroke: 230 mm SLIDE (HYDR. PRESS)   working velocity min.: 5 mm/s   working velocity max.: 70 mm/s   return velocity max.: 200 mm/s   return force: 200 to V-RING   nominal force: 200 to TOOL DIMENSIONS   lower table (left-right): 790 mm   lower table (front-back): 760 mm OVERALL SPECIFICATIONS (COIL LINES)   coil weight max.: 3 to COIL CHAIR   coil weight max.: 3 to STRIP-FEEDER   feeder type: roll feeder   band lubrication system: yes ELECTRICAL SPECIFICATIONS   total power consumption: 150 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS    ...

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Frieseke & Hoepfner, hydraulic unit MKP R 14 / 9-1.6 -Motor: AEG 1.5 kW / 1400 rpm -Pressure: up to 450 bar -Delivery rate: 1.6 l / min -Individual components: see photos -Hydraulic tank: with level indicator -Dimensions: 1520/630 / H820 mm -Weight: 260 kg

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Sold as is, in its current condition -Motor housing: Repair weld, see photos -Manufacturer: Frieseke & Hoepfner, hydraulic power unit MKPR 6/1.6 -Motor: AEG 1.1 kW / 1400 rpm -Pressure: up to 450 bar -Flow rate: 1.6 l/min at 1450 rpm -Individual components: see photos -Dimensions: 580/290/H485 mm -Weight: 46 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: ROM-Boffalora, double-acting hydraulic cylinder, 150 mm stroke -Type: 65 45M 150 FRA S -Piston rod: Ø 45 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 375/100/H160 mm -Weight: 14.8 kg/pc.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Hydraulic cylinder: double-acting with valve block -Type: unfortunately no type designation -Stroke: 450 mm -Piston rod: Ø 50 mm -Hole diameter: 35 mm / Hole spacing: 620 mm -Dimensions: 690/245/H180 mm -Weight: 40 kg

Motor three-phase current 400V with frequency converter (kW) 3 Saw blade dimension (mm) 5200 x 34 x 1.1 Flywheels Ø (mm) 480 Cutting speed (m/min) 20 – 120 Wingspan (mm) 610 Working height (mm) 780 Machine dimension without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard equipment Ergonomically redesigned, robust welded frame construction for mitre cuts from 0° to 60° right/left Stable, low-vibration frame construction with arm joint mounted in plain bearings Clear control panel to the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for the highest demands on cutting accuracy Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed hydraulically incl. automatic cutting pressure regulation Mitre adjustment and clamping (manual) Hydraulic Full Stroke Cylind ...

Transport tank made Hermann Waldner type 4500, in a good used and functional condition. Completely made of stainless steel, 1000 litres of filling volume. Dangerous goods type approval BAM 0301 / 31A. Large lid hatch, bottom drain valve. Mounted on base. Dimensions W/D/H 100/20/175 cm. Further on request.

Second-hand machine type Pester Pewo pack 450 Pester PEWO-Pack 450, built in 2003 only 2700h operating hours For tightening insulating individual and collective containers with PE film in the pharmaceutical cosmetics and food industry The technically high-quality series equipment includes: - compact and stable design in modular design - Control console with 4-line plain text display for the following, piece counter, speed display, hour counter, temperature monitoring, general fault indicator - Wear-free, infinitely adjustable, patented tightening system - Product protection by means of safety monitoring by means of light barriers in the closing area - Film monitoring, advance warning with optical and acoustic display as well as machine stop at the end of the film or film tear - Single aeration - Machine mobile, i.e. it has steering and buck rollers for internal transport, ...

X - axis 600 mm Y - axis 450 mm Z - axis: 450 mm B - Axis - 120 / + 45 ° C - Axis 360 ° Spindle speed range 20,000 rpm Spindle drive 18 KW Torque 91 Nm Tool holder 63 SK Pallet size 350 x 350 mm Large pallet load 150 kg Number of tool locations in the magazine 60 Large tool diameter 80 (125) mm large tool length 200 mm Gross tool weight 6 kg Tool change time approx. 3 sec. Feed range m/min Express feed m/min Rapid traverse B - axis 50 rpm Rapid traverse C - axis 140 rpm Machine weight 8100 kg Machine dimensions 6.6 x 4.0 x 2.8 m CNC HEIDENHAIN iTNC 530 Electr. Handwheel Probe BLUM Laser Direct displacement measuring systems 60-speed tool changer NC - Swivel rotary table (Torque) 7-fold pallet changer Spindle coolers SIGMATEC 15 / 900 cbm/h Oil Mist Extraction Internal coolant device 18 - 70 bar Conveyor

PVC Compounding Plant, Hot/Cooling Mixer A hot/cooling mixing system including accessories must be handed in. The control system (PLC) is outdated and needs to be reinstalled. The system is still installed and must be handed in from the site. Hot mixer: Henschel Fluidizing Mixer FM 1500 A Engine power: 180/280 kW, 2-speed 750/1500 rpm Külmischer: Henschel Cooling Mixer KMH 4500 Double jacket, 6 mixing tools, 77 rpm Motor power 55 kW Accessories: - Liquid scale 25 kg - Liquid scale 250 kg - Weighing container for powdered media 650 kg - Conveyor belt for bag addition - Feeding station for big bag with discharge aid and rotary valve (Not shown on P&I) - Weighing container for plastic recyclate 600 kg - Transmitter and buffer tank for discharge from cooling mixer - Kaeser EB 420 C suction blower - Suction blower (blue)

HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder

Press for paper or plastic Pressing pressure 5 tons 400 V 16 A Length 80 cm Width 80 cm Height 2 m

Load stand, swivel stand, lifting stand, shackle, load jack, lashing eye, lashing ring, anchor point, load stand thread -Quantity: 7 pieces -Height: 220 mm -Base plate: 450 x 350 x 20 mm -Shackle plate: 146 x 146 mm, M42, 4 pieces with shackle -Price: complete -Dimensions: 450/350/H220 mm -Weight: 42 kg/unit

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.

Axial fan, Gigabox, fan, blower, high-pressure duct fan -Power: 0.75 kW -Speed: 1420 rpm -Fan wheel diameter: 445 mm Protection class: IP54 -with connection cable and on/off switch -Dimensions: 520/560/H470 mm -Weight: 53 kg

Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 495 mm -Width: 398 mm -Height: 85 mm -Plate thickness: 20 mm -with support ribs -Weight: 37 kg

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 450 mm -Piston rod: M20 x 1.5 -Air inlet and outlet: adjustable -Dimensions: 680/115/H115 mm -Weight: 8.1 kg

Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 31 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...

Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 26 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...

Herma Labeler 452 MS with Graseby Allen Pressure Unit Perfect for e-cigarettes / lipstick etc

Format: Untrimmed: Min. 85x128mm, Max. 320x480mm, Format: Trimmed: Min. 80x120mm, Max. 315x475mm, Product Thickness: Max. 12mm, Capacity: 14000 Cycles/hour, Colour Monitor Touch Screen Control For All Functions, Automatic Format Pre-Setting, Feeders: 1 Hand Feeder, Horizontal Signature Feeders: 6x DHU 450, Vertical Signature Feeders: 2x DVU 450, Cover Feeder CHU 450, Stiching Unit ST 450 with 2 Stiching Heads 45-N14, Thickness Control, Delivery To The Left, Reject Gate For Incomplete Products, Three Knife Trimmer TR 450, With Heidelberg CHA Automatic Compensation Stacker, Delivery To The Left, Machine Condition: Excellent, Machine Was Complete Overhauldt In 2019, After That Was Very Rare Used