demag h 45 used for sale

tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...

Air dryer Mobile for 17-24 Nqm/h 219W.

RAIL LENGTH: 5 - 60 M, CONTINUOUS MEASURING, 6 LASER MEASURING HEADS, SPEED: 1 M/SEC., MODERNISED IN 1992

Stock number: U2110-1 Used decanter centrifuge by KHD HUMBOLD WEDAG type S3-2, designed in stainless steel AISI 304. Machine has bowl with internal diameter of scroll 610 mm and is driven by 37 kW electric motor. Maximum rotation speed of bowl 2050 rpm. Unit also is equipped with hydraulic pump and is installed on carbon steel frame. Machine had been designed for work on waste waters. With machine are included spare carbon steel bowl, gearbox and electric motor. Not included control panel and documentation.

HEIDENHAIN measuring rod ULS300

Producer: Nowicki Type: Hercules SNV-180 Power: 11 kW Weight: 2170 kg Capacity: up to 400 kg / h Power supply: 400 V / 50 Hz - Separator for bones NOWICKI type Hercules SNV-180 - Designed for all kinds of beef and pig bones - Chamber Volume 7.7 litres - Average cycle time of 30 seconds - Press time (adjustable) from 1 to 10 seconds - Maximum pressing force 105 t - Cylinder inside 0.7 mm / cylinder outside 5 mm - High performance and efficiency (25-80% profit) Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Many thanks for your interest on our second hand machines, please find follow our offer: Complete Waffle production plant, consiting of: manufacturer : Danger Wafer oven Type : WM 52 plates YOM : ca. 1975 - 1980 heating : natural gas or propane waffle sheet : 470x290 mm deep karee different : automatic sheet take off : Cooler and Fully automatic Hebenstreit WZ-EM wafer spread line for two colours manufacturer : Hebenstreit Type : WZ-EM YOM : 1991 output capacity : up to 50 sheet/min. wafer format : 290 x 470 mm bis 350 x 480 mm dimensions : ca. 11000 x 1300 x 1700 mm different : Film- und Kontaktstreichverfahren consisting of: - wafer magazine - First WZ Cream station - cover station - second WZ cream station - stack station - cover station - Pressing device We offer this machine in 'as is' condition, without warranty, ex Ware ...

For the production of beer from beer yeast

TYPE: DIRECT, BILLET DIA.: 90 MM, LENGTH: 400 MM

Motor power: 2,25 kW. Output: 3880 m3/h. Diameter of connection hole for aspiration pipe: 3 x 100 mm. Bag capacity: 2 x 300 l. Total height: 2400 mm. Impeller ? riveted stainless steel. Weight: 64 kg.

Board repair line with double end profiling line in top condition Workpiece parameters of the plates: Min.: 900 mm x 200 mm Weight min. : 17 mm Max .: 5000 mm x 1250 mm Max. Weight: 60 mm Weight: max. 150 kg < Accuracy: +/- 0.2 mm The portals have a max. Clock power of: max. 6 cycles / min The max. Partial performance: 18 parts / min (DEP line) Year of construction 2008 Condition: good (Original price of the line 2008 Euro 4.9 million) Consisting of: Feeding station with feeding rollers, Automatic vacuum lifting table for lengths up to 6 m Conveyor systems Repair line 1 Turning station Transfer service Repair line 2 automatic vacuum lifter for stacking (6m) Stacking roller conveyor Control cabinet with machine control Profilfraessanlage Stacking Tables; very well

Motor power: 1,5 kW. Capacity: 2480 m3/h. Diameter of connection hole for aspiration pipe: 100 mm. Bag capacity: 300 l. Total height: 2400 mm. Impeller ? riveted stainless steel. Weight: 51 kg.

see picture - on Anfr.

Many thanks for your interest on our Drop Rollers for hard candy, please find follow our offer: Type : Candy roller/ Drop Roller for Hard Candy, hand driven roller size. : approx 58mm x 177 mm Packing dimensions : approx. 630 x 580 x 450 mm (lxwxh) (wooden box suitable for export) Net Weight : approx. 65 kg. Gross weight : approx. 95 kg. Different: with one set brass drop roll round/egg shape without structure, round 300 other types possible. For every roll you decide for size, or you can give us your own form, Also available machine with working table, electrical engine and gear box. We offer this machine in as-is where it is condition delivery time: According to the arrangement ex warehouse Hess. Lichtenau

System: Used piston - diaphragm pump Manufacturer: Abel Type: HMD-G-20-0125 Year of construction: 2001 Series: HM Machine number: 5100074 Material: GG Capacity: 18 m m³/h Delivery pressure: 15 bar Speed: 131 U/min Temp: MAX 100 ° C Operating voltage: 380 V Frequency range: 50 Hz Motor: 11 kW Protection class: IP55 Flanges: DN 80 Dimensions: 1.70m L x 1.30m W x 1.60m H Miscellaneous: forced ventilation 230/400V, 0.11 kW

SOS Block bottom bag machine TRIUMPH III, Windm�ller + H�lscher, with bottom patch unit, 2 plies, photo cell, several former plates and gears, option: 4 colour tail end printer

<br>Original numbering work for Heidelberg MO<br><br><br>

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystallizer. C ...

Laboratory Candy pulling machine Application Sugar Pulling, Available 1 Kg, 2Kg & 5 Kg up to 50 Kg, the size of the engine is dependent on the size of the machine The action of the machine is derived from two driven arms rotating independently around a single fixed arm. The machine has one speed and pulling time can be set by means of a timer. The teflon arms are removable. This option is unique to this machine. It allows an easy cleaning. Safety guard automatic stopping with motor and starter Sugar Pulling Machine is mainly to aerated products like Chewy Toffees and others. This machine just stretch the gelatine based sugar mass and work air inside the batch. That avoid stickiness of the chewy Toffee at the teeth and give the product a spongee texture. The Machine is made for Laboratory trials and works batchwise, the product touching parts are made from stainless steel or te ...

<br>8 stations 7 investors P 15 Bulletin station Trimmer Trimmer HT 15 Stacker RS 10<br><br>Still in operation: No.<br>Available: immediately

Overhauled: 2018 Year of construction: 2001 Band saw blade 5800 x 41 x 1,3 mm Motor power approx. 11 KW with frequency control Cutting speed 20-170 m / min Square maximum work area: 430 x 430 mm Round maximum work area: 430 mm Section length 10-600 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 400 mm / s Weight approx. 4500 kg Dimensions Lxwxh 2910mm x3600mm x2200mm The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive -New electric components -Renewal of the pneumatic pipes -New pneumatic components -Renewal of the hydraulic pipes -Overhaul and renewal of hydraulic components -Overhaul of cabin -Overhaul of  ...

<br>7 stations chain 6 investors P 15 1 folding feeder FF 100 Bulletin station 2 Heftk pfe Hohner Three knife trimmer Band display<br><br>Still in operation: No.<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

7 color<br><br><br>Still in operation: Yes<br>Available: immediately

Flush cut and stepped end tuber with belt snatching system, 4 plies, foto cell, 0/2 or 4 colour tail end printer, area perforating system Available: at once

Tube length: 55 - 132 (165)cm Tube widht: 30 - 70 (80) cm 4 plies, photo cell, 2 colour tail end printer Available: at once

<br><br><br><br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

Tube length: 48 - 140 cm Tube width: 30 - 70 cm Bottom width 7 - 16 cm 1 valve Bottom patch unit 1 or 2 colour on bottom patch Shingle pressing Option: S-Pressing, Icoma Still in operation: Yes Available: now

Inline Biercarbonisierer

Generator set 60 kVA (hood unit) performance: 60 kVA / 48 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: FPT_IVECO Engine model: NEF45SM1F Engine type: Four-stroke diesel Type of injection: direct Kind of aspiration: turbocharger Cylinder, number and layout: 4-L Total displacement: 4.5 l Cooling system: Liquid (water + 50% glycol) Specifications engine oil: ACEA E3 - E5 Fuel consumption 100% PRP: 16.7 l / h Fuel consumption 75% PRP: 13 l / h Fuel consumption 50% PRP: 9.5 l / h Oil consumption under full load: 0.1% of fuel consumption Control: Mechanical Inner diameter output exhaust pipe: 70.3 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-3 11 ' 1/2 Insulation protection class: Class H Mechani ...

Generators of 100 kVA (hood unit) power: 100 kVA / 80 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: FPT_IVECO Engine model: NEF45TE2F Engine type: Four-stroke diesel Type of injection: direct, common rail Kind of aspiration: turbocharger and subsequent cooling Cylinder, number and layout: 4-L Total displacement: 4.5 l Cooling system: Liquid (water + 50% glycol) Specifications engine oil: ACEA E3 - E5 Fuel consumption 100% PRP: 22.6 l / h Fuel consumption 75% PRP: 18.5 l / h Fuel consumption 50% PRP: 13.4 l / h Oil consumption under full load: 0.1% of fuel consumption Control: Mechanical Inner diameter output exhaust pipe: 70.3 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-3 11 ' 1/2 Insulation ...

Machine completely reconditioned; Tube length: 56-164 cm Tube width: 35 - 70 cm Bottom width: 7,7 - 22 cm 1 or 2 valve units Shingle pressing belt Option: S-Pressing belt, Icoma Available: now

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

Generator 200 kVA (hood unit) power: 200 kVA / 160 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: FPT_IVECO Engine model: NEF67TE3F Engine type: Four-stroke diesel Type of injection: direct, common rail Kind of aspiration: turbocharger and subsequent cooling Cylinder, number and layout: 6 L Total capacity: 6.7 l Cooling system: Liquid (water + 50% glycol) Specifications engine oil: ACEA E3 - E5 Fuel consumption 100% PRP: 45.5 l / h Fuel consumption 75% PRP: 41.9 l / h Fuel consumption 50% PRP: 29.9 l / h Oil consumption under full load: 0.5% of fuel consumption Controls: Electronic Inner diameter exhaust pipe output: 70 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-3 11 ' 1/2 Insulation protect ...

<br><br><br>Still in operation: Yes<br>Available: immediately

overhauled in 2006 after overhauling only 100 workinghours Available: sofort

8 color size 1270 mm<br><br><br><br>

bag width 80 - 260 mm bag length 160 - 450 mm Available: sofort

Generator 250 kVA (hood unit) power: 250 kVA / 200 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: FPT_IVECO Engine model: C87TE3F Engine type: Four-stroke diesel Type of injection: direct, common rail Kind of aspiration: turbocharger and subsequent cooling Cylinder, number and layout: 6 L Total capacity: 8.7 l Cooling system: Liquid (water + 50% glycol) Specifications engine oil: ACEA E3 - E5 Fuel consumption 100% PRP: 59 l / h Fuel consumption 75% PRP: 48 l / h Fuel consumption 50% PRP: 35.7 l / h Oil consumption under full load: 0.5% of fuel consumption Controls: Electronic Inner diameter output exhaust pipe: 102 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-3 11 ' 1/2 Insulation protection c ...

Unit 601 kVA (hood unit) power: 601 kVA / 481 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: MTU Engine model: 12V1600G10F Engine type: Four-stroke diesel Type of injection: direct Kind of aspiration: turbocharger and subsequent cooling Cylinder, number and layout: 12 V Total displacement: 21 l Cooling: Coolant Specifications engine oil: S10 W40 Fuel consumption 100% PRP: 116,99 l / h Fuel consumption 75% PRP: 90,94 l / h Fuel consumption 50% PRP: 63,06 l / h Oil consumption under full load: 0.5% of fuel consumption Controls: Electronic Inner diameter output exhaust pipe: 106 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-3 11 ' 1/2 Insulation protection class: Class H Mechanical protection typ ...

1030 kVA generator (hood unit) performance: 1030 kVA / 824 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: MITSUBISHI Engine model: S12H PTA Engine type: Four-stroke diesel Type of injection: direct Kind of aspiration: turbocharger and subsequent cooling Cylinder, number and layout: 12 V Total capacity: 37,11 l Cooling system: Water Specifications engine oil: API CD or CF SAE 30 or SAE 40 Fuel consumption 100% PRP: 216,75 l / h Fuel consumption 75% PRP: 166,78 l / h Fuel consumption 50% PRP: 117,52 l / h Oil consumption under full load: 0.8 g / kWh Controls: Electronic Inner diameter output exhaust pipe: 212 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-0 18 " Insulation protection clas ...