demag h 45 used for sale

2 pieces of crane bottles

Qty. 1 Second-hand skin pass mill Mfc.: Mannesmann Demag Sack Built: 1980’s Modernised in 1986 & 1993 Type: Duo Cold Rolling Mill – Non-Rev. Dia. 330 x 500 mm Material: Carbon steel, cold rolled and annealed Strip width: 80 - 470 mm Thickness entry: 4.0 mm Exit: 0.2 mm Decoiler Modernised in 1986 ID: 400 with segments 500 & 600 mm Spreading range: 370 – 420 mm Strip tension: 1300 – 65 daN Braking system: Generator Braking torque: max. 1300 daNm De-coiling speed: 2.5 m/sec. Coil cross section: 20 – 1880 mm² Coil weight per mm strip width max.: 10 kg Coil weight: 5.0 T Coil ID: 400 & 500 mm Coil OD: 600 – 1400 mm Roll dia.: 300 – 330 mm Roll length: 500 mm Roll force: 1850 – 2400 kN Min. roll force: 150 kN Hydraulic roll adjustment Adjustment stroke: 80 mm Adjustment speed: 1 – 3 mm/sec. Rolling speed: 2.5 m/sec. (150 m/min.) PLC system: ...

Flat gear brake motor Gear motor Manufacturer: DEMAG Type: KBA112 B12/4 / KBA112B12 / 4 Detailed information on the manufacturers page, see pictures. Condition: New, can have traces of camp, comes from stock. Scope of delivery: see the pictures.

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.

1 pallet with various geared motors - see picture type BG10-11/D06LA4-TF BAUER Danfoss BG10-11/D06LA4-TF Gearboxnord SK33F-90L/4Bre16 (2 stu)

various rope seam from 2 to 10 t; 2 pcs. hook bottles 25 t Next: cat SOWITSCH 2 t Steel Elektus R 12

LENGTH :17200M DOUBLE GIRDER

Qty. 1 Second-hand spinner block Mfc.: Mannesmann Demag Built: 1981 Modernised: 1991-1995 Basket dia.: 1524 mm – 60 Pulling speed: max. 1000 m/min. Pulling force: 6.5 T at 250 m/min. Capacity: 6800 t/annum Entry tube dia.: up to 42 mm Wall thickness: up to 2.0 mm Exit tube dia.: 5 – 39 mm Wall thickness: min. 0.3 mm

Wall swivel crane Payload 250 kg Lifting height 5,000 mm Extension 6,500 mm Hallway control Electricallifting/Lowering Lifting speed 10 /2.5 m/min. Connection 380 Volt

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

clamping force: -- kN injection volume: 230 cm³ screw diameter: 40 mm platen size: 475 x 475 mm Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spare parts for injection moulding machines Arburg, Demag, Krauss Maffei, Battenfeld, Ferromatik, Boy, Engel Demag, Arburg and Krauss Maffei Valves / Proportional Valves Krauss Maffei / Rexroth MNR R900972653 + R900703217 + ZDR 6 DP0-45_40YM W80 MNR R900323180 Krauss Maffei 4WRAP-6 W7-02-21=24K4/M-561=KM / 6250961 00559499 / 00559137 Krauss Maffei 6252527 00559085 Krauss Maffei / Bosch 0 811 402 511 Krauss Maffei SDDB-3-PP-6 S520 + 6252570 Krauss Maffei 6253211 + SDDB-3-PP-6 S520 Arburg 4WRE 10 EA32-13/24Z4/M-425 Nr.41447 Arburg DBETB-10/180 41446 Arburg DBETB-10/25 41494 Arburg HS 1171-X168 176407 Arburg HS 1171-X112 160576 Arburg LS 1171 X112-10 / 83.745 Arburg Mod D681Z4807 Type: P80HXZR5HEA2-X + Mod D633-7396 TYPE A02KO4F0HXY Arburg Mod D681Z4877 Type: P80HXZR5HEA2-X + Mod D633-7468 Type A02KO4F0HXY Arburg Mod D681Z4707B Type P80HXUR5VEA2-X + MOOG Mod D633-7330  ...

Spare parts for injection molding machines Spare parts electric Demag Demag Sigmatek DKL 022 KD. 06792862 Demag Dias DTO 163 KD. 06792165 Demag Sigmatek DKL 012 KD. 06792865 Demag Dias DAO 041 KD. 06796265 Demag Dias DEC 181 KD. 06792665 Demag Sigmatek DKL 025 KD. 06793265 Demag Dias DAM 122 KD. 06792265 Demag Dias DDM 163 KD. 06792365 Demag Sigmatek DKL 013 KD. 06793065 Demag Dias DDM 164 KD. 06792465 Demag Dias DM 321 KD. 06014866 Demag Dias AO 041 KD. 06001466 Demag Dias AI 281 KD. 06001166 Demag Dias TO 323 KD. 06013666 Demag Dias DI 32W KD.06715565 Demag Dias PS 242 KD. 06029066 Demag Dias CP 126 KD. 06730365 Demag Dias AI 381 KD. 06013466 Demag Slides AO 081 KD. 06015066 Demag Dias DCP 642 KD. 06791765 Demag Sigmatek DKL 002 KD. 06111966 Demag Dias DAM 124 KD. 07024865 Demag Dias DDM 163 00733445 Demag Dias DEC 161 KD. 00703303 Demag Dias DAI 883 KD. 06 ...

Robot - Wittmann-Demag W833 / High-speed robot Year of Make: 2011 Location: Lodz, Poland Description: 4-axis robot: 4 axes are driven by servo motors (electric): X, Y-telescopic, Z; Axis C - pneumatic Travel in axes: X-900, Y-1600, Z-3000 Touch control panel The safety package for robots Robot with adapter, protective housing Description: 4-axis robot: 4 axes are driven by servo motors (electric): X, Y-telescopic, Z; Axis C - pneumatic Travel in axes: X-900, Y-1600, Z-3000 Touch control panel The safety package for robots Robot with adapter, protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Demag 250 kg crane system Payload: 250 kg Control GSA Type 4 Drive: Side: 3m Forward 2m Crane system has already been dismantled. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Brake ring conical, 9v 532KB160, Demag, new Special offer! If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part comes from the spare parts warehouse of a certified manufacturing company, has never been used and is in mint condition. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Sumitomo Demag injection molding machine Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021

Flat gear brake motor, ADE 50 TD, Demag, mint condition -60% Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - Comes from a spare parts warehouse of a certified production facility, - has very slight signs of storage, Flat gear brake motor, ADE50TD-D1.3-65-0/ 112, Demag, - Output speed 6.1/24.6 rpm - Motor speed 685/2760 rpm - Power 0.290/1.200 kW Motor protection class IP 54 Transmission ratio 112.0 - Motor installation position horizontal - Total weight, net approx. 81 kg - 380-400 V, 50 Hz, 2.10/3.20 A 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We wi ...

BEING NEGOTIATED Sumitomo Demag 280 ton Systec SP 280/630-840 year of manufacture 2014 280 Ton Clamp 2800kn Tie Bar Dist 630 Injection unit 840 Made in Schwaig, Germany 400v 50hz Exworks South America

Key data: 18 , 8 , 3

Screw compressor Mannesmann DEMAG SE 30 S 3 m³/min, 8 bar, 18.5 kW Good condition Test run carried out Ready for action

clamping force: 800 kN injection volume: 177 cm³ screw diameter: 35 mm platen size: 580 x 580 mm Condition: used, Specification: Horizontal injection moulding machine, type: Ergotech viva 80-400 - Internat. Size specification: 800 - 400 injection unit: - Screw diameter: 35 mm - L/D - ratio: 20D - Injection volume: 177 cm³ - Injection pressure: 2387 bar - Cylinder heating: 8,8 kW clamping unit: - Clamping force: 800 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 580 x 580 mm - Clear column distance: 400 x 400 mm Total machine: - Oil tank filling: 220 ltr. - Pump capacity: 15 kW - Voltage: 3x 400V, 50 Hz, N, PE - total power: 23,8 kW - Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm - Weight without oil approx.: 3,600 kg - 1x core pull Plant i ...

Gear motor, electric motor, electric gear motor -Manufacturer: DEMAG, gearbox type CM63 / GS -Speed: 21 rpm -Shaft: Ø 28 x 30 mm -Motor: Kobold type KGC 608.28 0.5 kW -Voltage: 220V -Protection class: IP20 -Dimensions: 490/160 / H200 mm -Weight: 25 kg

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

clamping force: 1.000 kN injection volume: 203 cm³ screw diameter: 40 mm platen size: 580 x 652 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 40 mm - injection volume: 230 cm³ - weight: 205 g Clamping unit: - Clamping force: 1000 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 400 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - 1x core pull - Voltage: 3x 400V, 50Hz, N, PE - Total power: 25 kW - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 6500 kN injection volume: 2011 / 323 cm³ screw diameter: 80 / 45 mm platen size: 1450 x 1350 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1: - Screw diameter: 80 mm - injection volume: 2.011 cm³ - weight: 1810 g injection unit 2: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 6500 kN - Centring: 200 mm - Platen size: 1450 x 1350 mm - Mould size: 1000 x 910 mm - Mould thickness min.: 450 mm - Mould thickness max.: 950 mm - 2x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 245 kW - Dimensions L/W/H: approx. 10,100 x 5,500 x 5,000 mm - Weight approx.: 36,000 kg Further DEMAG plastic injection mould ...

clamping force: 800 kN injection volume: 106 / 42 cm³ screw diameter: 30 / 22 mm platen size: 600 x 600 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 30 mm - injection volume: 106 cm³ - weight: 94 g injection unit 2: - Screw diameter: 22 mm - injection volume: 42 cm³ - weight: 37 g Clamping unit: - Clamping force: 800 kN - Centring: 125 mm - Platen size: 600 x 600 mm - Mould size: 420 x 420 mm - Mould thickness min.: 250 mm - Mould thickness max.: 590 mm - Voltage: 3x 400V, 50Hz, N, PE - Total power: 42 kW - Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm - Weight approx.: 5,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for th ...

Key data: 13000 , 4200 , 110

Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column