129,808 used machines on RESALE, but how to find them? Machine Search
pressure: - t diameter: 3 mm total power requirement: 2 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,5 x 1,5 x 2 m rivetting machine Workspace: Ø 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 55 mm arm length: 2500 mm workpiece height max.: - mm total power requirement: 8 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4 x 1 x 3 m Radial drilling machine MK 5 Spindle holder MK 5 Speed range 30 - 1500 min-1 Feed rates 0.05 - 0.6 mm/rev Space requirement approx. 3.7 x 1 x 3 m Weight approx. 5 tonnes (estimated) Working range: MK 5 x 2500 Drive: 3.7 / 6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 630 mm table load: 1 t table height: 170 mm total power requirement: 0 kW weight of the machine ca.: 330 kg dimensions of the machine ca.: 900750170 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Various gas forklift trucks, electric forklift trucks and electric high-lift trucks from various manufacturers are available. 1) Heli gas forklift truck, load capacity: 2500kg. 2) Heli gas forklift truck, load capacity: 2500kg. 3) Jungheinrich electric forklift truck, load capacity: 2000kg. 4) Jungheinrich electric high-lift pallet truck, load capacity: 1600kg. 5) Electric high-lift pallet truck Linde, load capacity: 2000kg. On-site inspection is possible.
centre height: 160 / 180 mm Control: NC total power requirement: ? kW weight of the machine ca.: 120 kg dimensions of the machine ca.: 500 x 230 x 270 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 4 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 222 m 1 x UWF 700 Digi 3 x UWF 801 TNC 135 + 124 1 x UWF 802 M From stock liquidation, partly not functional / in need of repair Price VHS / against bid The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 780 mm table width: 500 mm ampere: - A Control: Heidenhain 121 total power requirement: - kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2 x 2 x 2 m No. 1564 Die-sinking EDM machine HANSEN 750 S max. workpiece weight 100 kg Working area: 500 x 300 x 375 Control: Heidenhain TNC-121 Eropuls NC-2000 Table 780 x 500 mm Space requirement approx. 2 x 1.5 m Weight approx. 3.7 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece weight: 160 kg workpiece length: 250 mm diameter: 620 mm total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m Auswuchtwaage für Schleifscheiben und scheibenförmige Prüfkörper Workspace: 620 x 250 Control: max. Prüfkörpergewicht 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 400 mm width: 150 mm total power requirement: 24 V weight of the machine ca.: ? t dimensions of the machine ca.: 800 150 180 m Sine table with 24 V electromagnetic plate, swivelling over the longitudinal axis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 410 mm y-travel: 310 mm z-travel: 400 mm total power requirement: 2,2 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 222 m Universal tool milling machine HERMLE UWF 700 Spindle holder SK 40 Speed range 40-2000 min Space requirement approx. 2 x 2 x 2 m Weight approx. 1100 kg For further data see attached PDF Rigid table 700 x 285 Horizontal milling machine vertical - milling head enclosed - partially rep. conditioned Documentation Working area: approx. 410 x 310 x 400 Drive: 2,2 Heidenhain digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: - mm x-travel: 1250 mm y-travel: 630 mm Control: Heidenhain TNC 426 / 430 total power requirement: 48 kW weight of the machine ca.: 12 t dimensions of the machine ca.: ca. 5 x 6 x 4 m m CNC jig boring machine / vertical machining centre overhauled in 2000 Spindle ISO 50, speed range 30-3000 min-1 max. torque 522 Nm feeds 3-2000 mm, rapid traverse 10 m/min max. distance spindle nose - table surface 725 mm Projection spindle centre - stand 800 mm. Space requirement approx. 5 x 5 m, Weight approx. 12 tonnes The machine was completely overhauled and modernised in 2000 with digital drives and drives and Heidenhain control Fixed table 1200 x 710 36-fold tool changer, coolant system, the pictured magnetic clamping table is not included in the scope of delivery ! - Working area: 1250 x 630 x 560 Drive: 44 kW Control: Heidenhain TNC 426 PB The data for this ad was created with ...
x-travel: 3000 mm y-travel: 4000 mm z-travel: 1500 mm Control: Heidenhain TNC 430 M total power requirement: 120 kVA weight of the machine ca.: 83,2 t dimensions of the machine ca.: m 3/5 axes CNC portal milling machine with integrated C-axis and changeable milling heads. The machine had a purchase price of € 1.4 million in 2002. An inspection in the sellers plant under power is possible after previous appointment. Condition: The machine was overhauled in 2018, costs of over € 100.000,-. - Drives of the X-axis renewed - New hydraulic power unit - Complete electrical wiring renewed - Spindle cooling unit new - 2 pieces longitudinal conveyors new - Coolant pump new - Cover complete X-axis new - Bellows Y-axis new - Exchange measuring ruler X-axis - Fork head spindle bearing new Belleville spring assembly new Drive motor A-axis new Spindle cone ground - Overhaul milling gear (2020) Work ...
turning diameter over bed: 1250 mm turning diameter over slide rest: 1000 mm turning length: 11000 mm total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: m Center height 720 mm Center distance 11000 mm Turning diameter over bed 1250 mm Turning diameter over slide 1000 mm Workpiece weight max 12 to Speed 3-315 rpm - stepless Motor power 55 kW (DC) Equipment 1 position indicator HEIDENHAIN | Type ND 780 for 1 axis 1 four-jaw faceplate Ø 1000 mm 1 fixed steady rest 1 ring steady rest with four-jaw faceplate Ø 920 mm 1 Autom. 4-pos. tool holder 1 Chip conveyor 1 Machine lamp 1 Coolant device Operating key | operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 305 mm saw band length: 3375 mm cutting width: 350 mm dimensions of saw-band: 3375 x 27 x 0,9 mm : 305 mm : 260 mm : 350 x 200 mm : 250 mm : 230 mm : 230 x 200 mm : 175 mm : 155 mm : 170 x 100 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,5 x 1,8 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 10,0 t workpiece diameter: 320 - 3200 mm total power requirement: 1,1 kW load capacity drive unit: max. 5000 kg load capacity rotating unit: max. 5000 kg weight of the machine ca.: 1,6 t The self-adjusting D-HGZ roller blocks adapt to the different diameters of your workpieces yourself. This role block is designed for particularly heavy work. Furthermore, this Roller block suitable for thin-walled workpieces, as the four wheels per unit deliver improved pressure distribution. Characteristics: - Top quality electronic components - Infinitely variable speed of the drive unit - Wheels fitted with solid rubber tires enclosed in one steel construction - Heavy construction enables very high stability. - Good value for money allows for quick recovery your investment. - The D-HGZ range is supplied as a standard version and includes a Remote control with digital reading. Accesories: ...
: 2000 kg height: 1080 mm width: 1500 mm : nein : 1500 x 100 mm : 1,5 x 0,53 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting width: 375 mm Cutting height: 150 mm dimensions of saw-blade: 500 x 30 mm Motor output: 2 x 3 kW Cutting length: 5100 mm speeds: 2800 U/min air pressure: 6 bar weight of the machine ca.: 700 kg dimensions of the machine ca.: 6100 x 1450 x 1450 mm Profile support plate made of steel Stable cast construction of the saw unit Large cutting range, 2 profiles can be cut at the same time Easy adjustment of the moving unit with roller guides Double storage of the swivel device Safe clamping thanks to the two-pressure system Double saw feed guide Hydropneumatic saw feed External dimension correction scale Left saw unit fixed Swivel range 45°-90° Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: bis M 16 mm turning speeds: 0 - 600 U/min thread: M5 - M16 working area: 2050 Rmax. working area: 500 Rmin. table surface area: 900 mm engine output: 3,0 kW weight: ca. 250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5,0 t workpiece diameter: 250 - 2500 mm total power requirement: 0,75 kW load capacity drive unit: max. 2500 kg load capacity rotating unit: max. 2500 kg weight of the machine ca.: 0,9 t The self-adjusting D-HGZ roller blocks adapt to the different Diameters of your workpieces yourself. This roller block is for special designed for heavy-duty activities. Furthermore, this roller block is for Suitable for thin-walled workpieces, as the four wheels per unit are an improved Supply pressure distribution. || Features: | - Electronic components of Top quality | - Infinitely adjustable speed of the drive unit | - Wheels fitted with solid rubber tires enclosed in one Steel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recovery Your investment. | - The D-HGZ series is supplied as a standard version and includes a ...
: 2000 kg height: 500 mm width: 2000 mm : nein : 2000 x 100 mm : 2,0 x 0,53 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 2500 kg stroke: 3050 mm fork length: 1200 mm load centre: 500 mm turning radius: 2444 mm driving speed: 22 km/h guage width: vorne 1008 mm guage width: hinten 932 mm weight of the machine ca.: 3,64 t dimensions of the machine ca.: 3,8 x 1,25 x 2,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: -- mm workpiece length: -- mm work piece width: 18 mm range of angles: 15° - 50° ° weight of the machine ca.: 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm Application range of sheet thickness 6 - 40 mm The bevel angle can ...
travel -x axis: 1800 mm travel -y axis: 520 mm travel -z axis: 520 mm tool taper: SK 40 table load: 3 t tool piece magazine with: 30 Plätze spindle drive: 22 kW max. torque on the spindle: 220 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 520 mm y-travel: X mm z-travel: X mm weight of the machine ca.: 0.2 t Dividing head with collets www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 762 mm y-travel: 508 mm z-travel: 508 mm B-axis (table): +120/-35 Grad c-axis: 360 Grad control: HAAS für 5 Achsen tool piece magazine with: 40 Plätzen number of spindle speeds: 12000 U/min dimensions of the machine ca.: 4.3 x 2.35 x 2.8 m weight of the machine ca.: 8.5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: X t table-size: 550x390 mm throat: 550 mm magnetic plate size: 250x100 mm weight of the machine ca.: 0.25 t More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
projection area: 510x350 mm table-size: 300x170 mm longitudinal travel: 200 mm cross travel: 50 mm vertical movement: 150 mm amplification -fold: 10/20/50/100 voltage: 220 V dimensions of the machine ca.: 850x110x1800 mm weight of the machine ca.: 310 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 140 mm max. grinding diameter: 279 mm centre distance: 750 mm weight of the machine ca.: 1000 kg dimensions of the machine ca.: 1.5 x 1.25 x 1.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: HEIDENHAIN TNC-430 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm B-axis (table): 280 mm table swivelabel +/-: 220 (+/-110) ° -C-axis table rotating: 360 ° tool magazin:: 30 spindle taper: HSK63 spindle turning speed - stepless: -15000 U/min rapid traverse feeds rotary table: 36 U/min rapid travel x/y/z: 36 m/min Overall size: 3800X3600X3000 mm weight of the machine ca.: 8.5 t Coolant through spindle: pressure: 40 Bar 3D measuring tracer: RENISHAW Chip conveyor: Coolant installation: SIEMENS 840D www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Carpentry machine Hundegger k2 625 5 axis year 2003
A system for the mechanical separation of meat and bones, tendons or hides is available. Throughput capacity: approx. 3t/h, filling volume: 800l, working filling capacity: 80%-95%. Machine dimensions X/Y/Z: approx. 2300mm/1800mm/2100mm, weight: approx. 2300kg, control: Siemens Simatic, operating hours: 7504h. Tools included. Documentation available. On-site inspection is possible. Expected to be available from August 2025.
Lunch Box, Hamburger Box. Food Box Gluing Machine The machine was only adjusted and tested Can be demonstrated on site
Classic Center (Ink & Register remote control) Autoplate (semi automatic plate loader) Cooling and recirculation (Baldwin Balcontrol) Ink-roller washing device - automatic Blanket washing device - automatic Antistatic feeder (Compact) Antistatic delivery (Compact) Powder sprayer (Grafix Alphatronic 200) Speed Sheet/h (13000)
Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition
A coolant separator is available. Volume flow: 4000m³/h, total pressure: 2000Pa, power: 4kW, connection diameter: 75mm, material: stainless steel. Documentation available. On-site inspection is possible.
3 colors stack flexo printing machine. Ideal for aluminium because of the length of the machine Bj 1998 / Upgrade 2023, Working width = 420 mm Print width max = 400 mm, Print width min = 200 mm, Repeat = 330 - 610, Format change infinitely, Speed = 200 m/min, On - unwinder max diameter = 1000 mm, Turnstile but manual change. Tension control with dancer rollers.
Hugo Beck Flexo 500 S – Shrink Wrapping Machine Machine details: • Model: Flexo 500 S • Manufacturer: Hugo Beck • Year of manufacture: 04/2006 • Power supply: 400 V / 50 Hz • Power rating: 3 kW • Rated current: 5 A • Location: Dettingen, Germany Description: Robust and reliable shrink wrapping machine from the well-known German manufacturer Hugo Beck. This Flexo 500 S, built in April 2006, is in good and working condition. Ready for immediate use in production environments and suitable for a wide variety of packaging applications.
HAAS VF-1 CNC machining center was built in 2015 in the United States by HAAS AUTOMATION, INC. The machine, designed for unit and small batch production, is the ideal choice for any tool workshop. All this is due to the use of a number of modern components with excellent technical parameters, which guarantee high reliability and precise machining. Workpieces weighing a maximum of 1361 kg are machined inside a large, fully illuminated work area by means of a high-speed spindle and tools taken from a 20-position magazine. The machining process is free of vibration or oscillation, thanks to an extremely stable design made from top-quality steel. All this is complemented by an intelligent CNC control with an intuitive interface. The HAAS VF1 milling center weighs 3539 kg. It is also possible to purchase additional tooling shown in the photos (tool holders, vices, TSCHORN 3D tester, measur ...
Paxman - 12RPHCZ MK 7 Turbocharger Holset Model 6 Completely overhauled Unit price! 2 pieces available !
Grinding length 500 mm Grinding width 230 mm Table size 760 x 200 mm Automatic delivery Magnetic disk Filter system
x-travel: 2000 mm y-travel: 620 mm z-travel: 520 mm control: Heidenhain TNC 530 CNC turning speed range - main spindle: max. 15000 min/-1 tool taper: BT 40 table clamping surface:: 2500 x 550 mm tool change unit: 30-fach connected load: 25 KVA weight: 10,5 t Dimensions (LxWxH): 8,0 x 2,6 x 2,75 m Vertical CNC Machining Center - 30-station tool changer - Handwheel - Chip conveyor - Belt filter system - Several SK40 tool holders The system can be dismantled to 2.45 m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Swivel arm punch Sandt, in good condition, immediately available Robsvvhfuer Sb Nwkju If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Key data: 1050 mm, 900 mm, 980 mm
Mazatrol Smooth G Travel X-axis: 1,050 mm Y-axis: 900 mm Z-axis: 980 mm Distance spindle nose to pallet center 100-1,080 mm Distance from spindle centerline to pallet surface 100-1,000 mm Pallet Changer – Palletech 6 pallets Pallet size: 630 x 630 mm Setup station NC rotary table 360,000 Items Milling spindle Drive power 30 kW Max. spindle speed 8,000 rpm Tool magazine 160 tool positions BT-40 More options Tool length measurement Synchronized Threading Detachable handwheel Coolant system and chip conveyor Conveyor 70 bar high pressure pump separate tank with filter
used
Heidelberg Embossing Crucible TP, Machine Number T169693+ Heidelberg Embossing Crucible TP,T191298, Machine is in good condition, immediately available Rebevvikfer Sb Nwkju If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
bore capacity in steel (diameter): 13 mm throat: 180 mm bore stroke: 70 mm morse taper: 2 MK table:: 230 x 220 mm turning speeds: 240 - 3800 U/min engine output: 0,59 kW column diameter: 70 mm dimensions: 600 x 350 x 850 mm weight: 40 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 250 mm
Kitagawa TT 250 HMM03 NC Rotary Tables Table diameter 250 mm Spindle bore Ø 70 mm Weight 260 kg If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
impressions: 24 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Crestline The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Paper drill Hang 106DTK4, machine number 62407, in good condition, immediately available
VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 14-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | servo driven sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 14 heads | weighing range (single dump): 10-1500g | volume per weighing head: 1.6L | weighing accuracy: X(0.5) | discharge flap: single flap | surface finshing: plain surface (optional for surcharge dimpled surfa ...
VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 10-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | pneumatic sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 10 heads | weighing range (single dump): 10-1500g | volume per weighing head: 1.6L | weighing accuracy: X(0.5) | discharge flap: single flap | surface finshing: plain surface (optional for surcharge dimpled surface) ...
maximum number of results exceeded
please refine your search
