demag h 45 used for sale

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 102 x 50 mm Truss type: SLO 102|2 Agraffe: 5 HK Clear width: 1,450 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

AZO rotary screener New engine Sold with 7 synthetic sieve handles 0.2mm 0.5mm 0.6mm 1.4mm 1.4mm 1.5mm 4.5mm, Elec: 400 V, Engine power: 1,5 kW, Entry Sieve: 250x250, Sieve diameter:: 175, Screen length: 340

Tightening banding machine with shrink tunnel Manufacturer: Kiener Type ASK 450 Kiener Tightening Banding Machine Auto Skinetta 450 with hinge chain belt and shrink tunnel with bar chain belt and hot air gun on the side and from above. Siemens Control Film width 40-450 mm single lane Foil thickness 25-60 My Thickness tolerance +/- 10% Roll diameter up to film width 200 mm Outer diameter approx. 300 mm Up to film width 600 mm Outer diameter approx. 250 mm

Number:: 012005057812 control: Siemens Sinumerik 840 Tool changer: 24-fach Axles: 3 Miscellaneous:: mit Späneaustrag Miscellaneous:: CPU ist defekt The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Knapp transfer roller conveyor Toothed belt slider 90° 2900/2270-510-450 RA2417 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 710 mm Length: 2900 mm and 2270 mm Roller diameter: 50 mm Roller spacing: 90 mm Frame height: 90 mm Drive section height: +250 mm downwards Distance between belts: 330 mm Belt width: 250 mm Number of accumulation positions: 5 Accumulation position size: 700 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V inkluding Pneumatic overslide belts and end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Supports Side guide one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: nominal voltage: 24V, 380-500V Construction year: 2015 condition: Ausstellungsstück Conveyin ...

Inv. Num. : 8514 Type: CLX 450 TC Producer: DMG Created: 2022 Parameters: Switch-on hours: 13312 h Hours: 8547 h Maximum spindle speed: 5000 1/min X-axis travel: 750 mm Y-axis travel: 200 mm Travel Z axis: 1000 mm Max. workpiece diameter: 400 mm Maximum length of the workpiece: 1100 mm Machine weight: 9200 kg

Machine in standard version for automatic sharpening of straight knives in the planing head - Planer head diameter min. 85 mm to max. 225 mm - Tool length max. 330 mm (table stroke 440 mm) - Number of cutting edges arbitrary - Free angle infinitely adjustable 15° - 35° - Grinding spindle speed n=4,000 rpm. - Grinding wheel D=125 mm, bore d=20 mm - Grinding motor 1.1 KW, n=2,850 rpm. - Feed motor 0.053 KW, n=1,300 rpm - Grinding speed 650 mm/min. - Partial motor 0.033 KW, n=1,300 rpm. - Freely selectable grinding circuits per tool 1 - 5 - Coolant pump motor 0.065 KW, n=2,900 rpm. - Coolant / tank capacity approx. 115 litres - Mandrel (NEW) D=50 x 330 mm - Machine complete with accessories Machine dimensions: H=1200 mm, W=1,150 mm + D=820 mm / Weight approx. 450 KG Condition: Refurbished by qualified personnel, everything renewed and straightened, function tested, ...

Manufacturer: PRO-WAM Type of Machine : Process tank 450 L Year of Manufacture: 2019 Volume: 450 liters Tank used several times, like new, in very good condition, on wheels. Pressure up to 2 bar, with mixer and heating jacket, made of AISI 316Ti acid-resistant steel. Additionally, two UV light radiators were designed for the tank, mounted from the top through sight glasses. Process tank 450 l - vertical tank - pressure tank up to 2 bar - main tank made of AISI 316Ti acid-resistant steel - tank insulated with mineral wool, thickness 50 mm in the cylindrical part and on the lower head - outer jacket made of AISI 316Ti acid-resistant steel, thickness: 2mm - lower and upper cap pressed DIN 28011 - heating jacket with a capacity of 6 L - temperature in the tank and jacket 100 degrees. c - circulation pump - heating medium temperature sensor - expansion vessel of the heating system - ele ...

Electric Forklift JUNGHEINRICH Type EFG-V20 MFGE115-450 DZFabr. No. 89.90.74.09 Year of construction approx. 2000Nominal load capacity 1900 kgLifting height 4500 mmFork length 1130 mmFork carriage width 980 mmOverall height 2000 mmOperating voltage 48 volt- triplex mast with full free lift 1400 mm- hydraulic sideshift battery from year of construction 2006 Type 6 EPZS 750 (48 Volt/ 750 Ah) - battery in poor condition- 4-wheel solid rubber - tires, front 200/50-10, rear rear 16x6-8- Hydr. Auxiliary steering- automatic charger Jungheinrich,

RA1188 Schulz roller curve 90° roller curve conveyor 450-390 IR1220 Manufacturer: Schulz Angle: 90° Useful width: 390 mm Nominal/outer width: 450 mm Inner radius: 1220 mm Conveying speed: v = 0.35 m/s incl. lateral guides on both sides Roll: Type: G6/50 plain bearing with conical plastic moulding Transport mask: L x W x H = 1600 x 550 x 600 Transport weight: 100 kg Scope of delivery: without supports (if required, please inquire) Optional: Supports 70,00€ per piece Features: Running direction: LINKS, RIGHT Antrieb: SEW Getriebemotor Drive type: Round belt condition: very good (used) Nominal / inner radius in mm: 1220 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES KW: 0,37/S1 Conveyor speed m / s: 0,35 scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbind ...

CONTROLS   CNC controls SIEMENS 840 C WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 457 mm   grinding width max. - throughfeed grinding: 80 mm   material thickness max. - throughfeed grindin: 20 mm   grinding width max. - plunge cut grinding: 205 mm   material thickness - plunge cut grinding: 80 mm GRINDING SPINDLE 1   drive power: 23 kW GRINDING SPINDLE 2   drive power: 23 kW COMPONENT-FEEDER   Feeder Design: rotary Feeder   feeder velocity max.: 240 mm/min   feeder velocity min.: 20 mm/min Scope of delivery: - Machine - emulsion tank new in 2012 Measuring control IONIC 17A

filling amount: 1000 l Packing: 1,22 x 1,02 x 1,60 m Shipping weight: 300 kg Level measuring device ENDRESS + HAUSER Levelflex M FMP 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack crossbar: Shelving system: Nedcon Type: AS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: orange Box profile: 150 x 50 mm Clasp: 2 HK (hooks) Clear width: 3,450 mm 02x Locking pins, used Design: completely galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Key data: 500 mm, 45 °

The machine is fully functional, pictures are attached. On request, we will also be happy to send you an up-to-date video showing the machine in operation. Aluminum Double Miter Saw Make: Pressta-Eisele Type: LMS D 450/500 Classic Single II TU/6 Year of Make: 1995 Saw blade size: 450 or 500 mm min./max. cutting length: 240 / 6000 mm Cutting speed: 2820 rpm. Air pressure: 6-8 bar Drive power: 2 x 2.2 kW Weight: 1450 kg External dimensions: approx. 7500 x 1490 x 1790 mm Cuts: 45°-90° (adjustable both blades) Nozzle for suction approx. 70 mm with -Single II control can be positioned electronically -pneum. Clamping devices -pneum. Mist spraying device Good condition, fully functional, ready to plug in for subsequent and immediate use. If you are interested in purchasing the machine, please make us an offer that is subject to change.

Height=0.98 m, Overall length= 0.56 m, Overall width= 0.86 m, Net weight= 115 kg,

Height=1.75 m, Overall length= 1.45 m, Overall width= 1.6 m, Net weight= 525 kg,

Height=1.16 m, Overall length= 1 m, Overall width= 1.23 m, Net weight= 212 kg,

A compact lawn tractor John Deere is available. Engine: Yanmar 3-cylinder diesel engine, engine power: approx. 22HP, displacement: 894cm³, machine dimensions X/Y/Z: approx. 1900mm/1100mm/1200mm, weight: approx. 450kg. Includes rear spreader and snow plough. An on-site inspection is possible.

Electric Overbelt Magnet | Electric Magnetic Belt Separator reinforced series Factory overhauled (refurbished - used) with new bearing (spherical roller bearing) and new rubber conveyor belt Make: Wagner Magnets Type: 454-95/100-600 Conveyor belt width transverse: 1200 mm Conveyor belt width longitudinal: 1000 mm Conveyor belt distance: 300 - 400 mm Power consumption magnet: approx. 5.0 kW Drive: Bevel gear motor SEW Motor power: 3.0 kW, 400 V, 50 Hz Magnet (L x W x H): approx. 1240 x 950 x 600 mm Belt: Rubber conveyor belt EP 400/3 4+2 with T-profile (40 mm), new Machine weight: approx. 3200 kg Machine colour: RAL 6018 yellow-green Applications: Waste wood, waste paper and glass, mining, e-waste, commercial waste, foundry, household waste, coal-fired power plants, plastics, construction waste, sawmills, scrap processing, bulky waste, steel mills, cement and gravel  ...

Pile lifter Polar LW 450-2; cleaned and tested; Tub size 620x900mm; Load capacity 450kg; Light barrier; Stroke 850mm. Pile lift Polar LW 450-2; cleaned and checked; size 620x900mm; lift capacity 450kg; Photo Sensor; throw 850mm.

A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A ...

Inv. Num. : 8686 Type: Emcomat FB-450 MC Producer: EMCO Created: 2019 Parameters: Control system: Siemens Sinumerik 828D Work table length: 800 mm Work table width: 400 mm Maximum table load (even): 300 kg Spindle drive power: 10 kW Maximum vertical spindle speed: 5000 1/min X-axis travel: 450 mm Y-axis travel: 350 mm Travel Z axis: 400 mm Machine height: 1990 mm Machine length: 1980 mm Machine width: 2030 mm Machine weight: 2300 kg Equipment: Horizontal support arm Handwheel Tool holders (12 pieces) Mounting pads

Pile lifter Polar LW 450-1 EV; cleaned and tested; Stacking device; Tub size 620x900mm; Load capacity 450kg; Light barrier; Stroke 850mm. Pile lift Polar LW 450-1 EV; cleaned and checked; angular boards; size 620x900mm; lift capacity 450kg; Photo Sensor; throw 850mm.

Height=1.05 m, Overall length= 0.95 m, Overall width= 1.24 m, Net weight= 385 kg,

Aircooled chiller DAIKIN EWAD460BZSS001 459 KW Cooling capacity: 459 kW / 130.51 tons (12/7 — 35°C) Year of manufacture: 2012 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. McQuay HSW3121QS11YA (screw, inverter) Type of refrigerant: R134А Number of fans: 12 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump LOWARA FCTE80-125/55/P Dimensions: 6.15x2.23x2.36 m. Weight: 5310 kg. Working hours: 46042/51397 h. Condition: Good

Mefiag Satilum filter system Long Life Unit 3x with control system

A vacuum mixer/homogenizer Olsa for the cosmetics industry is available. Usable volume: 400L, total volume: 470L, vessel diameter: 850mm, vessel height: 730mm, discharge valve diameter: 30mm, inlet nozzle diameter: 25mm, speed: 30rpm, material inside/outside: AISI316/AISI304. Documentation available. An on-site inspection is possible.

Rühle Frozen Meat Slicer Type GFR 450 / 250 CW 5.5 Cross cutter 4 pieces

Engel Screw Barrel Bimetal, new and unused 105 mm diameter LD 22 4550 Unit: 3380 cm3 5550 Unit: 3700 cm3

Machine name: Decanter centrifuge used Manufacturer: Alfa Laval Type: DSNX 4545 Year of Make: 2000 Max. drum speed: 3,250 rpm Operating hours: 16,700 hours Material: Stainless Steel Drive motor: 37 kW Inner diameter drum: 450/258mm Ab. Sediment density: 1.2 kg/dm3 Max. operating temperature: 100 C° Dimensions: L 3,700 x W 1,100 x H 1,300 mm Curb weight: approx. 2,800 kg Tech. Documentation: Yes Accessories: Frequency converter, solids slide, incl. chute, liquid drain funnel and reversed eddy current brake Condition: Used Price: On request

For sale is a Marelli MJB 450 LB B24 generator with the serial number MX 28990. This model was originally paired with a Jenbacher 2020V12 engine. The generator has an output of 1,237 kVA at an output voltage of 400 V. The year of construction is 2010, the operating hours so far are 40,000. The price of this generator is 10,000 euros. For more information or to arrange a viewing, please contact us.

Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Producer: JAC condition: refurbished In store Made in Belgium Description Renovated slicer JAC EEM 450/11. Thanks to its dimensions it is suitable for bakeries, grocery stores. - easy to use - quiet operation - slice thickness 11 mm - blade oiling system - 400 Volt 50 Hz - maximum bread size (width x height) 30 x 16 cm - removable crumb collector - equipped with wheels

Deze extruder van Cincinnati staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 1999. Speciale opmerking: de extruder mist de versnellingsbak. Bj Usq Tr T Rod Dvycjlp – Merk: Cincinnati – Model: Titan 45R-APC – Bouwjaar: 1998 – Conische dubbele schroef extruder – Schroef Ø: 45 mm – Werkuren: 64.082

Foil Packing Machine Manufacturer Pester Type PEWO pack 450 Film Type: PE Film width: min. 50 mm – max. 450 mm Film thickness: min. 00.25 mm – max. 0.1 mm Reel; max. 320 mm Output 454 cycles/min. Documents available

saw blade diameter: 450 mm Saw blade: 50 mm capacity 90 degrees: round: 150 mm capacity 90 degrees: flat: 290x30 mm capacity 90 degrees: square: 135x135 mm : 0 - 1000 mm/min rapid return speed: 1650 mm/min : 0 - 30 ° dimensions of the machine ca.: 1500x1200x1770 mm weight of the machine ca.: 750 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU251U337 LocationBarneveld MakeAna-GmbH No.8020 84/2 Year of construction1999 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume450 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Pressure vessels Closed vertical tankcheck Notified bodyTÜV Capacity450 ltr Vessel sizes800x1100 mm Dished topcheck Dished bottomcheck Top connectionsDN 25 OutletDN50 Max. temperature-20/+180ºC With jacketcheck Internal heating spiralcheckSurface 1,8 m², volume 30 Ltr, max allowable work pressure -1/+10 bar, Max. temperature -20ºC/+180ºC Information Mounted on legscheck Floorspace0,95x0,95 m Total height1,75 m Weight220 kgPressure vesselsAnaTanks > Pressure vesselsBrand > Ana What you can expect from Foeth: -- Machine is in worki ...

General SKU323S573 LocationBarneveld MakeAcometi - S.P.R.L. Type4500 Ltr. No.C1570 Year of construction1990 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume4500 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel, Stainless steel 1.4571 (316Ti) Capacity4500 Ltr. Vessel sizesDia: 1800x2596 mm Dished topcheck ManholeDN 450 Top connectionsDN 40 (2x), DN 50 (3x), DN200 OutletDN 80, DN 100 Max. temperature165°C. With jacketonly on the conical part Max. temperature165°C. With paddle stirrercheck Motor6 kW 220/380 Volt Information Total height3,2 m Weight2600 kg Floorspace1,9x1,9 mPressure vesselsAcometiTanks > Pressure vesselsBrand > Acometi What you can expect from Foeth: -- Machine is in working condition - ...

General SKU244U281 LocationBarneveld MakeAZO TypeZimmerman N°3 No.12655 Year of constructionunknown Main Features MaterialStainless steel Motor1.5 KW Specified Features - Rotating sieve Rotating sievecheck Sieve sizesdia. 180x400 mm Screw sizesdia. 60x850 mm Inlet250x250 Outlet400x320 mm, 170x170 mm With inspection hatch140x255 mm Motor1,5 kW 220/380 Volt Speed± 700 rpm Air purged glandscheck Sieve cage missingcheck MaterialStainless steel Information Mounted on wheelscheck Total height1,1 m Weight190 kg Floor space1,3x1,2 mRotating sievesAZOSieves > Rotating sievesBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Power: 211 kW - Ratio: 71:1 - RPM in/out: 1.485 / 20,9 - Shaft ø in: 70 mm. - Shaft ø out: 190 mm.

Size: 1.500 x 4.500 mm - Decks: 4 - Included: Electrical motor and springs (Frame not included)

OVERHAULED - Power: 10,9 / 7,2 kW - Amperage: 49,3 / 32,5A - Voltage: 220V. DC - L x W: 1.600 x 1.300 mm - Conveyor belt: 1.400 mm - AA.: 2.530 mm - With Transformator rectifier from 380V. AC to 220V. DC - Overband separator is sandblasted and painted.

brand: Louritex, model: PHGM 450 t., Construction year: 03.2010, operating hours: 11.900 h, Cutting force: 450 t., Gripping force: 90 t., Thrust: 120 t., Power per wing: 130 t., Cylinder per wing: 2, Open box size: 5.000 x 2.400 mm, Bale size: 800 x 600 mm, engine: electro, General condition: functioning, Weight of the machine: +/- 32 t., con riel deslizante: 03.2010

Engine Brand: MTU, Conditie: NEW, Nominal Power @ Nominal Rpm: 260 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Bore: 128 mm, Stroke: 155 mm, Engine Capacity: 11967 cc, Qty Cylinders: 6 Qty, Emission Certificate: EURO 2 , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mercedes-om-457-947-new/83 7, , = More information =, , Type: Engine, Empty weight: 1.170 kg, Type number: OM 457.947

Engine Brand: MERCEDES, Condition: USED, Nominal Power @ Nominal Rpm: 260 Kw, Emission Certificate: EURO 4 , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mercedes-om-457-951-used/5 69, , = More information =, , Type: Engine, Year of construction: 1010, Type number: OM 457.951; Transport weight [kg]: 975

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Working Hours: 99999 Hour(s), Engine Condition: Core , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 1560 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 1875 , Generator Hz: 50 , Generator Volts: 6600 , Generator Amps: 164 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/aeg-dkb-h4506-04-generator-187 5-kva-used/52, , = More information =, , Empty weight: 9.800 kg, Type number: DKBH 4506/04 GENERATOR 1875 KVA

Engine Brand: MERCEDES, Condition: USED, Nominal Power @ Nominal Rpm: 295 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Bore: 128 mm, Stroke: 166 mm, Engine Capacity: 12800 cc, Qty Cylinders: 6 Qty, Engine Fuel Type: diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 6405 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 340 Kw, Rated Speed: 1900 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mercedes-om-458-991-used/4 2315, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.050 kg, Type number: OM 458.991

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 205 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c7-1-881-45865 16-used/42338, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.250 kg, Type number: C7.1 881-4586516

Max. operating temperature: 450°C, number of fans: 1, fan power: 0.75kW, power loss: 8kW, voltage: 400V, phases: 3, frequency: 50Hz, power supply: 26/26/32A, connected load: 18kW, control panel: Program Controller C40. With full documentation. The oven is in good condition, has been inspected regularly, and was in operation until recently. An on-site inspection is possible.