demag h 45 used for sale

Round cylinder, pneumatic cylinder, air cylinder -Stroke: 250 mm -Piston: Ø 25 mm -Piston rod: Ø 12 mm -Dimensions: 36/410 mm -Weight: 1.1 kg

Round cylinders, pneumatic cylinders, air cylinders, standard cylinders -Stroke: 160 mm -Piston: Ø 20 mm -Piston rod: Ø 16 mm -Number: 3x available -Price: per piece -Dimensions: 45/365 mm -Weight: 1.55 kg

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 200 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Dimensions: 65/65/H450 mm -Weight: 3 kg

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 80 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Price: per piece -Number: 3 pieces -Dimensions: 94/94/H350 mm -Weight: 5 kg

Reference Num.: 4100 Brand: Heidelberg Type: KS Cylinder 38x52 Size: 38 x 52 mm Available: directly Status: Not in production Location: Deutschland Sheet size: max 38 x 52 mm Total weight: kg 3,500 / lbs 7,716

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Hoerbiger -Type: AZ5080/50 -Piston: Ø 80 mm -Stroke: 50 mm -Pressure: max. 10 bar -Number: 4x available -Price: per piece -Dimensions: 95/95/H325 mm -Weight: 3.7 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 100 mm -Piston diameter: approx. 100 mm -Piston rod: Ø 25 mm -Total length: 355 mm -Total length extended: 455 mm -Number: 1x available -Price: per piece -Dimensions: 117/117/H355 mm -Weight: 4.25 kg

USED in working order HMI for Husky PET and conventional injection molding machines All Husky models manufactured between 1998 and 2005 Brand Xycom Automation Model 9960 Part number 726619 Voltage 100-250v Frequency 50 and 60Hz Made in USA

equipped with Iemca Boss 332E-r/32 barfeed new in 2008 with 12 mm guide channels - chip conveyor - Fanuc 18i-TB Control

ThermoRoll oven Heuft VTR 10.12,5.10 Thermo oil -Thermal oil ovens -Manufacturer: Karl Heuft GmbH - Type: VTR 10.12,5.10 -one oven is for 2 rack trolleys of 10 editions each -Sheet size 58x98cm -Furnaces with exhaust hood -Built in 1998

Electric motor, three-phase motor -Voltage: 240/415 V -Power: 0.12 kW -Speed: 680 rpm -Shaft: Ø 15 x 85 mm -Construction: B14 -Protection class: IP 33 -Price: per piece -Number: 5x available -Dimensions: 295/185/H140 mm -Weight: 7 kg

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 2800 rpm -Shaft diameter: 19 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 275/190/H155 mm -Weight: 12 kg

semi-hermetic screw condensing units MODEL:BBLGS2-8OMY-FB(R134A) SERIAL NUMBER:BLG1509005 VOLTAGE:415V/3Ph/50Hz COOLING CAPACITY:216.4kW POWER:49kW REFRIGERANT/OIL:R134A/BSE170 SIZE:28501374.6`1321.4 ATE:2015/09 CE SUPREME ELECTRIC & REFRIGERATION CO., LTD.

NNP High shear mixer Stainless high shear mixer, sits over a vessel with hopper to add product, shaft length 600mm, diameter of high shear head 120mm, 3Ph

semi-hermetic screw condensing units MODEL:BBLGS2-100MY-FB(R134A) SERIAL NUMBER:BLG1509006 VOLTAGE:415V/3Ph/50Hz COOLING CAPACITY:248.4kW POWER:56kW REFRIGERANT/OIL:R134A/BSE170 SIZE:31501374.6' 1432.9 DATE:2015/09 CE SUPREME ELECTRIC & REFRIGERATION CO. LTD.

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1655 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 275/195/H156 mm -Weight: 9 kg

electronic clamping elements, twist-and-turn clamps -Clamping force: 160 kN -stat. max.: force 30 kN -Clamping stroke: 15 mm -Total stroke: 60 mm -Dimensions: 720/200/H220 mm -Weight: 60 kg

From the stock of authorities: Pulse system little used Elmatech Hybrid 4002 Year of construction 2005 Welding capacity 400Ampere at 60% ED 320Amps at 100% Water cooling 4-Roll Wire Feeder Wire feeder case DV 39 with 5meter intermediate hose package 4meter burner with regulator Wire rolls 1.0-1.2mm + rolls for aluminum wire Dimensions in mm without case 1000x450x930 with operating instructions, pressure reducer and ground cable

Key data: 508 mm, 406 mm, 384 mm

Machine Details Stock-No. 1105-04000 Type of machine milling machining centers - vertical Make HAAS Type DT 1 Year of manufacture 2007 Type of control CNC Storage location HAGUENAU FRANCE Country of origin USA Delivery time IMMEDIATELY Freight base EXW Technical details X-Travel 508 mm y-travel 406 mm Z-Travel 394 mm turning speeds 15000 rpm Tool Changer 18 Rapid Travel X/Y/Z 15.2 m/min total power requirement 11 kW weight of the machine approx. 2 t dimensions of the machine approx. 2 x 2 x 2 m Additional information very nice WITH MAGSIN 20 TOOLS BT 30 TABLE 660 X 281 MM

bearing diameter: 120 mm motor: Synchronmotor Nominal turning speed: 3000 1/min Maximum turning speed: 4000 1/min Torque: 76,4 Nm current: 38 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 250 mm, 4 kW, 4060 m³/h

arke: Holtrop Jansma Clean Air Extraction Type: MSO 250 Year of construction: 2016 M-No.: W0056730S Clean air extraction: MSO 250 with flame protection device Intake support: ø250 mm Length: 2,250 mm Width: 1,230 mm Height: 2,840 mm Weight: 600 kg Capacity: 4,060 m3 /hour Pressure: 1,900 Pa Power supply: 4.0 kW, 380V, 9 Amp Filter surface: 27 m2 Filter bags: 30 pcs. Length of filter tubes: 1,450 mm Filter tube diameter: 200 mm Cleaning: included Noise: dB(A) Flame protection system: automatic fire extinguisher with powder extinguishing agent, automatic slider in the return air duct, automatic electrical shutdown of the extraction (New powder fire extinguisher witrd assembled before delivery) Scope of delivery: filter system, with built-in intake fan, control cabinet, automatic fire extinguishing installation with flame protection damper

Holtrop Jansma Extraction with Kontainer Chip Disposal Type: MSK350S Year of construction: 1998 Type: overpressure filter system Intake manifolds: ø350 mm Capacity: 8,000 m3/hour Year of construction: 1998 Filter surface: 46 m2 Fan: ETD 350, 7.5 KW/1.500 tpm Star wheel chip disposal: 800 mm - Pressureless Chip disposal fan: EMD-200, 4 KW-300tpm, 45m3/uur Explosion Pressure Release: Doors serve as a pressure release in the event of an explosion Pressure Measurement: Pressure Dial Gauge Cleaning: 0.13 KW/1500 KW vibrating motor Air recovery: 500500 mm with built-in flame protection damper Dimensions: 3,3503,0001,200 mm Scope of delivery: filter system with intake fan Fan, transport fan, control cabinet, air recovery with built-in flame protection flap

Holtrop Jansma-AFS clean air extraction with compressed air cleaning, auger discharge, rotary lock, chip fan, return air with summer/winter gate valve and fire protection device Type: OSFS 185 Year of construction: 2005 (2015 new turnstile and new control system) Clean air extraction Suction supports: ø700 mm + ø700 mm Length: 3,500 mm Width: 2,300 mm Height: 6,200 mm (onderbak 2,700 mm + bovenbak 2,700 mm + 800 mm fans) Capacity: 21,000 m3 /hour Chip fans: 2 15 kW, 380V, 56 Amp, 10,500 m3/uur, 3,000 tpm, 3,850 Pa, Type: RL E 550130 Filter surface: 185 m2 Filter tubes: 150 stuks Length of filter tubes: 2,200 mm Diameter of filter tubes: 180 mm Cleaning: Compressed air cleaning Flame protection: Sprinkler installation with fire brigade connection Screw: HJ STH-380 12 tpm Turnlock: HJ ZRS-300, 31 tpm Hopper dimensions: 250350 mm Transport fan: Connection diamet ...

Vacuum filler with accessories Manufacturer: Handtmann Model: VF 616 + AL 216 - 21 Dimensions: 215x160x225cm/150x70x130cm Electric power: 6 + 2.5kW Volume: 350 liters Capacity: 3.600kg/h

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully automatic hot stamping press Oropress Mechanical eccentric press with lift table Lift table as pneumatic sliding table 250 x 250 mm Fully automatic sequence, optionally triggered with foot switch for single stroke Heated press punch 120 x 200 mm up to 250 °C Safety grille Film Feed Unit Built in 1986

Stepped end tuber type 951, Gartemann + Hollmann, Year 1980, 4 plies, 2 colours, photo cell, Tube width 30-65 cm, Tube length 50-121 cm, Machine mechanically and electrically mounted, we also have a 4 colour tail end printer suitable for that machine

SOS Block bottom bag machine TRIUMPH I, 1 ply, 4 colours, photo cell, Tube width 3-7,5 cm, Tube length 12-34 cm, Bottom width 5-12 cm, machine ready for test production

Valve sack bottomer, type Progress 525, Gartemann & Hollmann, with rotary feeder, valve station, bottom patch station with 1 colour printers each side, Tube width 32-60 cm, Tube length 68-134 cm, Bottom width 7-15,5 cm, machine mounted

Flat and satchel bag machine Matador 20, Windmoeller & Hoelscher, Tube width 9-20 cm, Tube length 10-32 cm, machine ready for test production

Edge magazine for edge banders -Spaces for edges: 5 pieces -Max. Edge width: 60 mm -freestanding -Dimensions: 900/530/H1030 mm -Weight: 208 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Number: 1x prism -Price: complete -Dimensions: 210/85/H226 mm -Weight: 14 kg

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bench router Brand: Bäuerle Model: SFM Year of construction: 1968 Spindle diameter: 30mm Clockwise/counterclockwise rotation Feeder Brand: Holzher Model: ET 117

x-travel: 800 mm y-travel: 630 mm z-travel: 800 mm Control: Siemens type: 840 D size of pallet: 500x630 mm numbers of pallets: 8 : 360 ° turning speeds: 6000 U/min Table load: 800 kg spindle taper ISO: 50 Tool changer: Pos. chip conveyor: Feed: 1-36000 mm/min Cooling through the spindle: 50 bar total power requirement: kW weight of the machine ca.: 19,5 t dimensions of the machine ca.: 8x7x4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pallet wrapper, stretch machine for pallets, second-hand - : Price ex location: 4.250.-€ (net), incl. loading! Very robust device! Type HAD 1500 Completely overhauled by the manufacturer Equipment of the machine: Electrical control system completely overhauled (frequency converter) Foil brake (magnetic particle brake newly powder-powdered) adjustable Foil carriage restored Photocell for pallet height scanning Manual Functions Turntable remounted Drive-on ramp used Additional design: with wheelchair access (can be moved with forklift) Condition: very good Available: now Location: 91177 Thalmässing

PPSM Habrama 2200 Precision Profile Grinding Machine Rack and Pinion Grinding Machine Manufacturer [manufacturer]: Habrama Type [ type]: PPSM 2200 Control unit: Siemens 840D sl Sinumerik Construction year: 10/2009 Travel paths: X-axis (longitudinal): 2200(2500)mm Y-axis (transverse): 500mm Z-axis (vertical): 410mm C-axis: +30°/-30° B-axis: +20°/-20° U-axis: 105mm W axis: 125mm B2 axis: +20°/-20° Workbench: 390 x 3.750mm Max. table load: 4000kg Feed speed X-axis [feed speed]: 21m/min Feed speed Y-axis [feed speed]: 10m/min Feed speed Z-axis [feed speed]: 6m/min Feed speed C-axis [feed speed]: 2m/min Feed speed B-axis [feed speed]: 6m/min Feed speed U-axis [feed speed]: 4m/min Feed speed W-axis [feed speed]: 4m/min Feed speed B2 axis [feed speed]: 6m/min Grinding head Drive power: 45kW (S6 at 40%) Spindle speed: max. 4000 1/min Grinding ...

Used vacuum filler HANDTMANN, type: VF 628 with lifting device -partially overhauled- - for filling, portioning and twisting meat or dough products - Microcomputer controller PCK-4 - New colour display - Funnel divisible - with lifting device - Filling capacity: up to 6,000 kg/h - Maximum filling pressure: up to 72 bar General overhaul - New conveyor curve - new sprocket - Lifting device remounted - new chain - all bearings new The machine is in very good condition. Viewing and test run are possible by arrangement.

Reference Num.: 4103 Brand: Heidelberg Type: SM 102-2-P Construction year: 1998 Impressions: 477 mio Size: 720 x 1,020 mm Available: directly Status: Not in production Location: Malaysia Sheet size: min 280 x 420 mm, max 720 x 1,020 mm Printing speed: max 13,000 sheets/hour Printing units: 2 Paper thickness: 41.14 mm Machine size: Length: 6,680 mm, Width: 3,160 mm, Height: 2,170 mm Total weight: kg 16,900 / lbs 37,258 Equipment: - CPTronic - WEKO Puderapparat T66

Key data: 1120 mm, 345 mm, 400 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 1/min Travel X/Y/Z 1120/345/400 mm Feed range X/Y 16 - 800 mm/min, Z 5 - 250 mm/min Rapid traverse Milling head swivel range +/- 45°, quill stroke 90 mm Connected load approx. 14 kW Incl. coolant device Electric tensioner, bracket cover

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: HOLEX -Type: SK 50-2/20-63 -DIN: 2080 -No.: 0108016995 -Weight: 2.9 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: HOLEX -Type: SK 50-3/32-73 -Hoffmann Group No.: 302 460 50 -Weight: 3.4 kg

Milling machining center CNC Hedelius Tiltenta T7-4200

colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 145.346 include HAKRO Hotfoil unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Professional production system Floor model - works electrically with foot release heavy duty version cleaned & checked Four-head model Floor model with foot pedal heavy duty model adjustable side stops several paper drills drill holder

2 x Bock compressor in very good condition. Please refer to the type debt for data

Gear motor, electric motor -Speed: 65 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Number: 1x engine available -Price: per piece -Dimensions 360/180/H175 mm -Weight: 12.2 kg

Cleaned & Checked Model 54S Number of heads: 1 Maximum stack height (mm) 50 Tabletop model Power supply (V) single or three-phase Power 220V=1.05A / 380V=0.6A W x D x H (cm) 80 x 54 x 73 Weight, net (kg) 30

automatic baler Manufacturer: HÖMA Type: BP 4000 PA Year of construction: 08/1991 Technical Data: Press force: 40 t Filling opening: 1,350 x 820 mm Bale size: 755 x 900 x 600 - 1,200 mm Bale weight: up to approx. 400 kg Setting: 4-fold horizontal Transport dimensions: Length: approx. 5,650 mm Width: approx. 2,200 mm Height: approx. 2,350 mm Weight: approx. 6,180 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 25 rpm -Power: TA = 8 Nm -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 360/140/H185 mm -Weight: 14.4 kg