demag h 45 used for sale

Scrubbing machine, floor cleaning machine, mopping machine, plastic container, plastic tank, container, liquid container scrubbing machine -Liquid container: made of plastic -Usage: for cleaning machines or other applications -Dimensions: 390/545/H440 mm -Weight: 5.2 kg

Gear motor, electric motor, three-phase motor, electric gear motor -3 phase motor voltage: 42/50 V -Power: 0.12 kW -Speed: 25/30 rpm -Construction: B3 angle -Hollow shaft: Ø 19 x 35 mm -Protection class: IP44 -Dimensions: 390/200/H185 mm -Weight: 19 kg

I am selling a stacking system HOMAG BARGSTEDT TBH22/D/25/12, built in 2001. Destacking system One-sided guide Spout also suitable for pallets. Postural head vacuum shoe system. Vacuum system (with pump) Automatic loading. Entry table motorized roller system Exit table on the floor with lifting mechanism motorized roller system Exit table front roller system Enters feed roller stazion for quilted material. Security fences fully complete ! Working capacity Approx. 8 cycles / min Available right away. Ready for use, possible to test. With CE certificate and full documentation.

Steel staircase, exterior staircase, machine staircase, machine access, extension staircase -Design: stable design, as a machine access ladder -Step size: 600 x 260 mm -Height: upper step 200 mm -Overall dimensions: 590/620/H220 mm -Weight: 28 kg

Guide track, guides, tool slide, cross table, cross slide, bed guide track, machine bed -Guide track: from Meuselwitz lathe -Measures: see drawing in the photos -Dimensions: 780/355 / H390 mm -Weight: 135 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Clamping plate: length 5020 mm -Plate thickness: 37 mm -Dimensions: 5020/500 / H255 mm -Weight: 1550 kg

x-travel: 650 mm y-travel: 560 mm z-travel: 650 mm table surface area: 400 x 400 mm control: Fanuc 18i-M spindle turning speed range: 120-12000 U/min : ja/yes hand wheel type of pallet-changer: 2 Cooling through the spindle: 10 bar chip conveyor: ja/yes feed: 670 mm/min distance work spindle /surface of the table: 800 mm table load: 400 kg toolpiece magazine: chain magazine: 60 BT 40 b-axis: 360 1° rapid traverse:: 40 m/min feed: 1-40.000 mm/min tool changing time: 1,3 sec tool/tool tool changing time: 3,8 sec chip/chip total power requirement: 22,4 kW weight of the machine ca.: 10,5 t dimensions of the machine ca.: 5 x 3,3 x 3 m (LBH) Machining centre - Horizontal Mitsubishi M-H4B, year of construction 1998, good ondition, regularly maintained. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice base plate, clamping plate, vise plate, rotary table -Rotary table: Turntable for vise -T- Round groove: Ø approx. 217 x 18 mm -Recess: Ø 90 mm -Degree display -Dimensions: 275/340/H90 mm -Weight: 20.6 kg

The scope of delivery includes: 01x Tiefensteg, used Material color: sendzimir galvanized Total length: approx. 1,010 mm Stand depth: approx. 1,000 mm Clear span: approx. 895 mm Profile dimensions: C: 75 x 45 x 18 mm Technical data for the Tiefensteg: Manufacturer: Jung Heinrich Type: Esmena (TFZ 18) Truss support: approx. 55 mm Material thickness: approx. 1.50 mm Weight: 2.731 kg / pcs.

pressure: 110 t throat: 290 mm stroke: 20-124 mm no. of strokes: 60 / 90 Hub/min ram adjustment: 85 mm table surface area: ca. 920 x 590 mm ram surface: ca. 530 x 280 mm distance table to upper part of the press: ca. 450 mm hole in the table: ca. 180 x 300 mm mm table height: ca. 750 mm tool hole in ram: Ø 50 mm Number of working hours: 8214 h distance table to upper part of the press: mm weight of the machine ca.: 5,5 t dimensions: ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new ones press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 200 mm -Hole spacing: 140 mm -Price: per piece -Number: 3 pieces -Dimensions: 200/15/H65 mm -Weight: 1.5 kg/piece

Quill for jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Stroke: 60 mm -in: a wooden box -Dimensions: 390/340/H170 mm -Weight: 15.8 kg

Stock # U2423-1 Used stainless steel conical nauta type powder mixer by Pharming type HV 1000 (CZ). Cone has diameter 1550 mm x height 2200 mm. Total volume of tank about 1700 l, working volume up to 1000 l. Total height 324 cm. Standard mixing screw is top driven by el. motor 3 kW, 970 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 330 cm x diameter 170 cm x weight approx 1000 kg. Machine had been working in food industry.

Stock# U2423-2 Used stainless steel conical nauta type powder mixer by Pharming type HV 600 (CZ). Cone has diameter 1440 mm x height 1855 mm. Total volume of tank about 1300 l, working volume up to 600 l. Total height 2770 mm. Standard mixing screw is top driven by el. motor 3 kW, 965 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 277 cm x diameter 180 cm x weight 600 kg. Machine had been working in food industry.

100 ton x 3000mm 3i Graphic control 8 Axis With tooling

HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg

Product number: 2751J Type: B3/4 Serial number: HT 25929 Year of construction: 2014 Refrigerant: R404A Compressor: Danfoss Optyma Power: 3 x 400V, 50Hz, 3.9kW Dimensions: 800 x 1200 x 1500 mm

Gearboxes, spur gears, bevel gears, transmission gears, crane gears, hoist gears, grab lifting and closing gears -Translation: 76.1 :1 -P(kW): 43/n1 2000 rpm -Dimensions: 1230/660/H540mm -Weight: 600kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Stroke: 323 mm -Piston rod: 12 mm -Dimensions: 465/45/H45 mm -Weight: 1.45 kg

Tool pressetter Needs new computer and software Estimated price 2022 from producer € 4500,--

Used Helpman LEX 26-E evaporator on Freon with electric defrost. Complete with 3 ATB RFT0,25/4-7 fan - 50/60 Hz - 0,25 kW - 1410/1710 RPM - diameter 457 mm and a total airflow of 14.000 m³/h. Brand: Helpman Type: LEX 26-E kW: 22,8 Refrigerant: Freon Number of Fans: 3 Fin Space in mm: 7 Defrosting: Electric m³/h: 14.000 Sizes: 2650x740x670 mm (LxWxH) Volume: 30,9 dm³ Weight: 159 kg Amount in stock: 6

Safeline Twin head metal detector Serial: 115464 Stainless twin lane metal detector, ferrous in foil head, belt dimensions 2100mm x 100mm, aperture 150mm x 160mm, with pneumatic blow reject into reject bin, bin full sensors, 3Ph

Haitian 1400 ton High Tonnage Year 2009 In production Can be inspected Availability Immediate

x-travel: 530 mm y-travel: 600 mm z-travel: 300 mm 0: 7 bar Air consumption: 70-90 Nl/min. voltage: 120/230V+-5% kVA total power requirement: 1,5 kW weight of the machine ca.: 22 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sumbel Herald 500; good condition; cleaned and tested; Working width 500mm; suitable for hot or cold glue. Sumbel Herald 500; good condition; cleaned and checked; working width 500mm; used for hot or cold glue.

Grinding and polishing machine for the shoemaker's profession, cleaned and tested.

Top perforating machine with foot operation, 60 cm working width

Electric motor, three-phase motor -Manufacturer: Holz-Her, electric motor type 80S-4 -Power: 550 W -Speed: 1350 rpm -Shaft: Ø 19 x 40 mm -Construction: B3 -Dimensions: 270/210 / H160 mm -Weight: 8.5 kg

Bracket, holder, support block, retaining support -Bracket: height adjustable -Threaded rod: Ø 45 mm -Dimensions: 255/152/H225 mm -Weight: 10.7 kg

Case rounding machine Make Schmedt Model Prärund HHS17-45 Year 1997 Size 450 mm working width and spine width up to 100 mm Available direct

- technically efficient, ready to work - after full service - motor power: 0,5 kW - disc diameter: 175 x 20 mm, 95 x 20 mm - pneumatic profile clamping

exhaust filter system, exhaust filter system, exhaust filter, hot filter, industrial exhaust filter -Filter system: Manufacturer/type unfortunately unknown flange dimensions DN100 -Individual components: see photos -Dimensions: 2020/1630/H2490 mm / 1850/800/H800 mm -Total weight: 1292 kg

Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: WMW Heckert, rotary table type D 315 k TGL 28561/02 -Clamping surface: O 315 mm -Height: 140 mm -Groove: 14 mm -Dimensions: 615/540 / H150 mm -Weight: 83 kg

Horlemann HR10U-S switchgear 12 kV HR 10U the universal switchgear for industry and utilities Modular medium-voltage switchgear for the distribution of solar power Switchgear: Manufacturer: Hörtemann Circuit: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short circuit power: 20 kA/1s Height: 1900 mm Width: 4550 mm Depth: 750 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Design data HR10U: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Type: Cast resin Upper voltage: 10 kV Low voltage: 400-230 V Circuit: Dyn5 Year of construction: 2010 Weight: 1.8 t The depressurization of the switchgear is carried out via a pressure relief chamber in the lower area of the control panel Data: Inspection r ...

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Tensioning tool: 270 mm -Groove: 14 x 36 mm -Dimensions: 270/20/H50 mm -Weight: 2.0 kg

Inv. Num. : 4427 Type: WMX 60i Producer: HURCO Created: 2017 Parameters: Control system: WINMAX Switch-on hours: 5648 h Operating hours: 1554 h Working table length: 1 680 mm Working table width: 660 mm Maximum table load (uniform): 1 360 kg Spindle drive power: 18 kW Maximum vertical spindle speed: 12 000 1/min X-axis travel: 1560 mm Y-axis travel: 660 mm Cone: SK40 Number of all tools: 30 pieces Maximum tool length: 300 mm Maximum tool weight: 15 kg Machine weight: 9 000 kg

Industrial Ethernet Switch, Netzwerk Switch, Lan- Switch, Rail Switch -Hirschmann: RS20 Rail Switch -Abmessungen: 125/70/H130 mm -Gewicht: 0,4 kg

Truck bed with crane, workshop and power supply in very good condition! Arpo loader crane type Hummel GSK 500 CE year 2015, rope 5mm length 15m, load capacity max 500kg, at 1.5m radius max 350kg. Loading area for mounting on trucks or as a trailer body. Was mounted on truck Mitsubishi Fuso Canter 4x4 DOKA 6C18D Year of construction 2015, manufacturer GEWA Fahrzeugbau. ARPO crane with electric winch, lifting capacity 350kg at radius 1.5m Structure with lockable sliding door, inside small ALUCA workshop with workbench, Drawer cabinets with 100% pull-out, vice, LED lighting and power distribution 400 volts and 220 volts.

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Steel jaw: 200 mm -Hole spacing: 140 mm/Ø 11 mm -Dimensions: 200/18/H65 mm -Weight: 1.8 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate -Width: 300 mm -Length: 420 mm -Height: 70 mm -Groove width: 14 mm -Weight: 52 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -Prisms: 90° x 75 mm -Dimensions: see drawing in the photos -Dimensions: 2500/270/H175 mm -Weight: 188 kg

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Pull-down jaws: with magnet -Interior dimensions: 140/160 mm -Groove width: 8 mm -Price: per piece -Number: 2 pieces -Dimensions: 200/30/H100 mm -Weight: 3.1 kg/piece

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -1 piece: pull-down jaw -Interior dimensions: 140/160 mm -Groove width: 8 mm -Dimensions: 200/30/H100 mm -Weight: 3.2 kg

Continuous rotary table HAU R60-1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800 mm, 3 polishing units with 7.5 kW each, polishing shafts 50 mm diameter, max. polishing wheel width 2 x 400 mm + 1 x 280 mm, max. polishing wheel diameter 420 mm, motorized longitudinal and height adjustment – machine equipped with complete. Application system for liquid polishing paste More pictures on request

Rotary indexing table HAU RK 6-1200, with 6 working spindles and 4 polishing units type PES, each 11 kW, 300 mm disc width, with oscillation, motorized height adjustment, liquid paste system (guns + pressure tank), incl. control cabinet Price and further details on request.

turning diameter: 300 mm turning length: 300 mm control: Sinumerik 810D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 810D 12-fold revolver bar loading device Breuning Irco Simag 42.1R (max. bar diameter 42mm) chip conveyor tail stock Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 550 mm max. Drehdurchmesser / max. turning diameter 300 mm max. Drehlänge / max. turning lenght 300 mm X-Weg / X-travel 170 mm Z-Weg / Z-travel 335 mm max. Stangendurchlass / max. bar diameter 45 mm Drehzahl / spindle speed 6000 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X / rapid feed X 36 m/min Eilgang Z / rapid feed Z 36 m/min. Antriebsleistung / drive capacity 20 kW Gewicht der Maschine ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibu ...

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper -Ventilation duct inlet with: filter -Outlet: Ø 390 mm -Dimensions: 1340/1100/H600 mm -Weight: 114 kg

Agilent 1200 HPLC system consisting of: Agilent 1200 G 1312B SL binary HPLC pump (up to 600 bar) Agilent 1200 G 1315B Diode Array Detector Agilent 1200 G 1316 B TLC SL Colcom/column thermostat Agilent 1200 G 1379 Degasser Agilent 1200 G 1330 Thermostat for Autosampler Agilent 1200 G 1367D Autosampler Hip ALS SL + on request with Agilent Chemstation/Warranty

Fixed stop side on the left. Brief description of the equipment: - Fixed stop side left - Workpiece transport device - Upper pressure - Control Power Control PC22 - Release agent spraying unit - Joining milling unit, 2 x 3 kW - Gluing part A20 Basic for rolls up to 3 mm and strip goods up to 20 mm, with melting unit with granulate container and quick-clamping system - Cross-cut unit, 2 x 0.8 kW, with pneum. Dissimulation - Lubricant spray agggregat - Pre-milled aggreagt 1.5 kW, pneum. adjustable - Mould milling unit FK13, 2 x 0.4 kW - Universal milling unit 4 kW, controlled, with infinitely variable axis - Multi-plastering device MN21 autom. - Finishing unit FA11, with finishing device, detergent application and buffing unit, pneum. adjustable -Noise protection - Free space for additional processing units Further equipment information: - Machine stand throughout f ...

Level limit switch, level measuring device, sensor, switch, level transmitter -Type: Nivotester FTL325N-F1E1 -Number: 6x available -Price: per piece -Weight: 140 g