demag h 45 used for sale

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 795 mm -Width: 600 mm -Height: 145 mm -Plate thickness: 30 mm -with: support ribs -Weight: 148 kg

Hydraulic. guillotine shears, used, ready for demonstration hydraulic plate shearer, used , ready for operation Typ / type: 252.6000.4 Fabr./ make: Helmut Lotze Baujahr/ year: 1995 Lager-Nummer / Stock number: 0989 Blechstärke bei größte Blechbreite/ thickness at max. cutting length: 4 mm Schneidbreite/ cutting length: 6040 mm Weight: approx. 22 t Specification: Hinteranschlag / backstop Rollablage / Roller tray

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 160 mm -Hole spacing: 100 mm -Price: per piece -Number: 6 pieces -Dimensions: 160/20/H50 mm -Weight: 1.1 kg/piece

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Honeywell, gas pressure switch unused, Ovp -Type: C6097A2310D -Control range: 30-150 mbar -P max.: 500 mbar -Number: 19x switches available -Price: per piece -Dimension box: 110/95/H95 mm -Weight 0.3 kg/piece

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Honeywell type: C6097A2410D -Control range: 100-500 mbar -P max.: 600 mbar -Pressure switch: 5 A-250 V -Protection class: IP54 -Price: per piece -Number: 23 pieces -Dimensions: 110/95/H95 mm -Weight: 0.3 kg/piece

Clamping plate, welding table, welding table, straightening plate -Storage plate with: roller conveyor -Height: 660 to 1000 mm adjustable on both sides -Steel frame: solid -Dimensions: 1120/515/H660 mm -Weight: 64 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool for: press brake -Groove: W/D 9 x 12, 5 x 8, 17 x 20 mm -Length: 3 x 835 mm, 1 x 272 mm -Width/height: 60 mm -Drawing: with the pictures -Weight: 67.5 kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Honeywell type: C6097A2110D -Control range: 1.0-10 mbar -P max.: 200 mbar -Pressure switch: 5 A-250 V -Protection class: IP54 -Price: per piece -Number: 25 pieces -Dimensions: 110/95/H95 mm -Weight: 0.3 kg/piece

Safety control, safety door switch, switch buffer, bumper, safety contact buffer -Manufacturer: Haake, switch buffer - bumper -Type: HSB 1112-10 -Voltage: 50 V AC, 75V DC -Price: per piece -Number: 2 pieces -Dimensions: 2830/180/H110 mm -Weight: 7.2 kg/piece

Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg

Brake boring device Hunger 6.5 A 400 V System Brake drum & disc with accessories Grinding spindle Safety grilles

Universal milling machine Speed 90 - 2000 rpm x 650 mm Y 300 mm Z 400 mm Feed rate in x electric Coolant pump Accessories Weight 1 ton

max. format 34 x 46 cm Year of construction: 1954 Hot foil stamping machine 1 Slide preference 1 heating plate Delivery date: immediately Price on request. We deliver and install worldwide!

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 390 mm -Length: 1185 mm -Height: 42 mm -Groove width: 18 mm -Holes: see photos -Weight: 145 kg

Disc lathe Lathe for plates, bowls, rings, wheels, etc. Manufacturer: Hempel Model: ERSP / ER/Sp 4 Workpiece diameter: max. 400 mm Workpiece thickness: max. 80 mm

HANDTMANN VF-630

Fong Kee (Taiwan) Year of manufacture 2016 Double Head (125mm screw) Accumulator type continue extrusion machine Machine In production Product type 160 Liter Float Dimensions 1188mm x 875mm x 407mm net weight 9kgs gross weight 17kgs estimate production rate 30/32pcs per hour Mold dimensions 1300mm x 1260mm x 860mm

Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2008 21.7g 96cav mold Expected delivery July2023 Can be inspected and seen in production

HUSKY HPETL230E-RSE95D-95 + 48 CAV HOT RUNNER + AUX inc CHILLER DEC 2015 Mold: INCLUDED (HUSKY) ATTENTION NO COLD HALF INCLUDED Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FAST DELIVERY LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2010 Expected delivery July2023 Can be inspected and seen in production

Workbench, work table, assembly bench -Width: 2000mm -Depth: 700mm -Height: 850mm -Drawers: 3 -Storage: 1 -Number of workbenches: 3 available -Price per piece -Weight: 116kg/pcs

Four-sided planer Leadermac 823 Working width 230mm Working height 160mm Head system Bottom 11kw Right 7.5kw Left 7.5kw Top 11kw Top 11kw Bottom 11kw Rights 15kw Left 15kw Upper heads with supports Feed regulated on the wave Feed motor 7.5kw Rollers pulling in the table material Pneumatic upper pulling rollers Adjustment of heads by controller

Site power distributor, site power meter, connection cabinet, crane distributor, distributor cabinet, power distributor, crane connection cabinet -Distribution box: made of VA -Dimensions: 410 x 400 mm -Depth: 165 mm -Price: per piece -Number: 2 pieces -Weight: 10.5 kg/piece

Roll jaws, floating center jaws, pull-down jaws, machine vice jaws, reversible jaws -Ground reversible jaws: 135 mm -Hole spacing: 80 mm/groove: 3 mm -Price: per piece -Number: 4 pieces -Dimensions: 135/16/H40 mm -Weight: 0.6 kg/piece

Clamping angle, clamping aid -Bracket made of: aluminum -Clamping angle for: workpiece clamping -side stop rails -Dimensions: 1155/200/H160 mm -Weight: 22 kg

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaw: 200 mm -Hole spacing: 140 mm/Ø 10 mm -Dimensions: 202/18/H75 mm -Weight: 2.1 kg

Bandsäge Karl Müller Cutting width 70 cm Cooling 2 cutting speeds Weight 400 kg Length 2 m Width 0.80 m Height 1.20 m

Lathe Speeds: 40 - 2000 rpm Tension - lead screw Distance between centers 1 m Center height 230 mm Length 2.50 m Width 1.20 m Height 1.60 m Multifix B recording Accessories Machine unchecked

mc-80 a, 2x Horizon COLLATOR mc-80 m, SPF 20

Thermo Relief Machine, 15 ́

Standard, 2 drilling heads

Year: 2011 Travel X-axis: 2032 mm Y-axis: 660 mm Z-axis: 610 mm Spindle speed: 12,000 rpm with internal cooling Power: 18 kW Tool holder: SK 40 40 tool slots Table load: 2,700 kg Machine weight: 18,000 kg Machine hours: 11,417 hrs. Spindle hours: approx. 5,000 hours (maximum) Spindle change in 2020 - Subject to technical errors and prior sale. -

gauge block -Manufacturer: Hommel, gauge block no: 42161 -Handover: as is as seen -Measuring range: 0.2 to 0.9 mm, 0.1 missing -Dimension box: 65/70/H45 mm -Weight: 0.2 kg

Output throttle SEW HD 001 Item number 813 3255 PVmax 15 W Cable cross-section 1.5 16 mm2

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -Piston diameter: 32 mm -Piston rod: Ø 18 mm/M16x1.5 -Recording: dimensions see pictures -Price: per piece -Number: 2 Stück -Dimensions: 250/110/H65 mm -Weight: 2.7 kg/piece

Hurricane Pulse Filter Model JSS-4 33-300 Capacity 37,500 m³/h Filter area 300 m² 180 pcs filter bags Dimension filter bags 160 x 3300 mm Air-conditioned control cabinet as good as new year 2012 incl. all return air ducts incl. centrifugal fan HF 2/500 – R, 30 kW with 15,700 m³/h incl. centrifugal fan HF 2/550 – R, 30 kW with 19,300 m³/h incl. 1 pcs spare motor 30 kW incl. a complete set of new replacement filter bags incl. 3 Gottwald tubular screws from rotary valve to silo, 1 x 3500 x 194 mm 0.55 kW, 2 x 6,000 or 9,000 x 219 mm 1.1 or 1.5 kW Dismantling can be organized Subject to errors, changes and prior sale

Pullers Cross Extractors Furnace Shooter 160cm - Cross cloth pullers - We have 3 pieces in stock - For settling bread and rolls - Made of stainless steel - On wheels Dimensions stainless steel trolley : W: 176cm D: 72 H:186cm Puller dimensions: : W: 162cm D: 61.5cm For details see pictures

Double head wire stitching machine Hohner Accord 25/40; good condition; cleaned and tested; .max. Staple thickness 25mm with folded clamp and 40mm on both sides; 2 stitching heads; Length of staple back 14mm. Double head wire stitching machine Hohner Accord 25/40; good condition; cleaned and checked; max.thikness 25mm or 40mm by both sides; 2 heads; length of clamp 14mm.

Quick-release clamping device, quick-release clamp, drilling device, drill bushings -Drilling jig: as a quick-clamping device for flat material -Transport box: incl. -Drill sleeves: Ø 12 mm, spacing 100 mm -Dimensions: 1900/150/H60 mm -Transport box: 2040/225/H280 mm -Weight: 70 kg

CNC control, control panel, machining center, server cabinet -I/O: Control panel -Dell: Desktop KXGVD -Dell: Precision T1650 Tower -with: scanner -Dimensions: 505/640/H1600 mm -Weight: 74 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 325 mm -Piston diameter: 32 mm -Piston rod: Ø 18 mm/M16x1.5 -Recording: dimensions see pictures -Price: per piece -Number: 2 piece -Dimensions: 530/110/H65 mm -Weight: 3,9 kg/piece

Planetary Mixer Mixer Hobart NCM30 - Planetary mixer Hobart - 30 litres - with 1 boiler - with 1 dough hook - with 1 stirring blade, whisk - with 1 flat stirrer - 380 -415 V - 1.1 kW - 50 Hz

Disc grinding machine Grinding machine for plates, bowls, rings, wheels, etc. Manufacturer: Hempel Model No.: PQ-4 Year of construction: 1982

Clamping plate, welding table, welding table, straightening plate -Mounting plate is: steel -Width: 650 mm -Length: 650 mm -Height: 845 mm -Plate thickness: 40 mm -Plate is: on steel frame -Transport dimensions: 650/650/H845 mm -Weight: 203 kg

Furniture dollies, furniture dollies with plastic wheels, furniture transport trolleys, transport trolleys, platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, panel trolleys, pipe trolleys -Length: 1040 mm -Width: 700 mm -Height: 1025 mm -Quantity: 1 piece -Weight: 52 kg

2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 70k Motivated seller

2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 77k Motivated seller seller offer No. resale 070623B

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Power: 1.03 kW -Voltage: 176 V -Speed: 2000 rpm -Shaft: Ø 19 x 40 mm -Number: 3x motors available -Price: per piece -Dimensions: 460/120/H150 mm -Weight: 16.6 kg/piece

Power cable, solar cable -Solarflex: PV1-F 1 x 6 qmm -1x4 mm³: 0.6/1 kV -Dimensions roll: Ø 400/310 mm -Weight: 8 kg

x-travel: 1700 mm y-travel: 400 mm z-travel: 400 mm Control: Siemens 480 D table width: 500 mm table length: 2000 mm total power requirement: 16,25 kW weight of the machine ca.: 4750 kg dimensions of the machine ca.: 3000x 2500x 2800 m Machine number 9599 - 4th axis / horizontal / diam. 315 mm - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.