demag h 45 used for sale

Modernised machine with new LTG control system StoreControl L currently 6 identical machines available Exterior Dimensions: Height 4889 mm Overall width 2785 mm Overall depth 2810 mm Total payload machine up to 2 x 15,000 kg 63 carriers with center bar for up to 400 kg payload each in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 55 to 750 mm Start of the operating opening in 875 mm above OKFF, then 875 mm high Engine power Vertical drive 6 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Colour scheme grey/blue Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

Wood oven Habomat 20 wood pellets Häussler as good as new Häussler Habomat 20 -Voltage: 230 volts -Frequency: 20 Hz -Current: Ignition phase: 7.3 A Operating: 0.81A -Rated thermal input: 35 kW -Fuel: Wood pellets HP5 -Year of construction: 2016

Heidelberg Stitchmaster ST 100 Year of construction.: 2004 6 Investors 1x Turnaround feeder Trimmers with central groove Stacker

We offer an LTG-TowerMax L 20.0-250-2460-825-6440 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6440 mm Overall width 2850 mm Installation depth 2900 mm Total payload machine up to 2 x 10,000 kg 52 carriers with center bar for up to 400 kg payload each in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 55 to 750 mm Start of the operating opening at 900 mm above OKFF, then 800 mm high Engine power Vertical drive 4 kW / 400 Volt Horizontal drive 0.5 kW / 400 Volt Colour scheme grey/blue, galvanised carrier Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

WP Haton, Rototherm, bakery oven, brand: WP Haton; type: Rototherm; rotation oven: yes; description: turning circle 1260 mm; room dimensions . approx. 1080x1650x1980mm; equipped with digital readout with touch-key operation - 3 ovens

Machine name: Continuous horizontal mixer dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: 1.4301 Drive motor: 5.5 kW Hsyqeirqy Version: EExdellCT4 Total capacity: 235 litres Wetted parts: stainless steel 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: Yes Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used Price: On request

-Model UW-105-0 -Serial number: 86.131.711 -380 volts -13.7 kW Dimensions: 64x72x190cm (WxDxH)

We offer an LTG-TowerMax L 20.0-250-2070-825-6680 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6680 mm Overall width 2400 mm Installation depth 2885 mm Total payload machine up to 2 x 10,000 kg 37 carriers for up to 250 kg payload each in clear usable dimensions: B = 2070 mm T = 825 mm Usable height up to 57 to 750 mm Start of the operating opening in 900 mm above OKFF, then 825 mm high Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.55 kW / 400 Volt Colour scheme grey/grey, galvanised beam Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

For sale 3 rack ovens complete with fireplace system

We offer LTG-TowerMax L 30.0-250-2460-825-8450 storage systems modernized by us with a completely new StoreControl L control system. currently 13 of 17 identical aircraft are still available Exterior Dimensions: Height 8450 mm Overall width 2805 mm Overall depth 2810 mm Total payload machine up to 2 x 15,000 kg 50 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 57 to 750 mm Start of the operating opening at 890 mm above OKFF, then 800 mm high; hand-operated lifting door, Engine power Vertical drive 5 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Colour scheme creamy white/blue, galvanised backing Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently ...

Fiber Laser Machine HLF1530 8KW - IMMEDIATELY AVAILABLE high-quality equipment Laser power: 8kW - VA up to 20mm, FE up to 30mm Sheet size: 3000 x 1500mm Equipment: Precitec Auto Focus Procutter Cutting Head IPG resonator with 8kW incl. German ! On-site warranty THK Guided Tours fast, automatic changing table Sheet metal layer detection automatic nozzle cleaning Siemens touchscreen control with LAN/USB Siemens Drives CE safety by TÜV Süd Sick light barriers around the changing table Will include: Warranty CAD CAM Software Commissioning Delivery within Germany Training offered We have been servicing YAWEI machines for the European market for more than 15 years. We are your service partner for all questions. You can test an identical machine at any time with us under power. Come and visit us !

TOP CONDITION - OVERHAULED IN 2022 ! - 1 year warranty Year of construction: 2007 Panel format: 3000 x 1500 x 100mm Power: 4000W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick puncture incl. ball roller table incl. 4-fold head change magazine incl. 2 cutting heads incl. 10-fold automatic nozzle changer FE: up to 24mm VA: up to 15mm oxide-free designed for high-pressure cutting up to 20bar no foundation needed ! Optional automatic loading and unloading by Mazak CELL510 can be offered with warranty / commissioning / training Always regularly serviced

Fiber Showroom Machine - FIBERLASER Model Series HLF Power: 6kW Sheet size: 3000 x 1500mm Changing table Siemens touchscreen control with LAN/USB Siemens Drives Tsubaki conveyor belt for small parts automatic sheet metal layer measurement Precitec Auto Focus Procutter Cutting Head IPG Resonator YLS with 6kW Will include: Warranty CAD CAM Software Libellula[CUT] Commissioning Delivery within Germany Training offered Other sizes / power levels up to 15kW are available at short notice. We are trading house and service provider in Germany for YAWEI machines for more than 15 years. All training / services / spare parts deliveries are handled by us. In our showroom, YAWEI fiber lasers and press brakes can always be tested under power.

We offer LTG-TowerMax P 4.9-245-20-325-4600 paternosters modernized by us with a completely new StoreControl P control system currently 2 identical machines available Exterior Dimensions: Overall height 4,600 mm Overall width 3,420 mm Installation depth 1,620 mm 20 carriers with a payload of 245 kg each in clear usable dimensions: H = 325 mm W = 2,910 mm T = 595 mm Chain jump 381 mm Total payload up to 4,900 kg Side table in 1000 mm above OKFF with NiRo worktop, 300 mm deep, manually operated lifting door Colour scheme grey/grey Motor power drive 2 x 1.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries

OFFSET PRINTING MACHINE HB GTO 46 + Vers. WITH N&P UNIT (numbering & perforating) M. No.: 676411N // Counter (m): 45 Format (cm): 32x46 Dampening: Varn Kompac III Equipment / Additional information: with N&P (numbering & perforating) unit Bacher control 5000

Centerless external cylindrical grinding machines Herminghausen SR 40-3 Machine Was improved and rebuilt by the company Ebert. Thus type designation CL 43. Original price 299.000, - €. Operating voltage: 400 volts, power consumption: 22 kW, workpiece diameter 2 - 130 mm, largest grinding length for through grinding 250 mm, grinding wheel diameter min/max 400/600 mm, grinding wheel bore 604.8 mm, control wheel diameter min/max 220/300 mm, control wheel bore 152.4 mm, grinding wheel circumferential speed 40 m/s, control spindle speed infinitely adjustable 0 - 200 rpm, control Siemens S7, cooling lubricant supply unit, weight of the machine ca. 6000 medical history Errors excepted!

We offer a paternoster LTG-TowerMax P 2.9-105-28-215-4220 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 4,220 mm Overall width 3,270 mm Installation depth 1,150 mm 28 carriers with a payload of 105 kg each in clear usable dimensions: H = 215 mm W = 2,850 mm T = 410 mm Chain jump 254 mm Total payload up to 2,940 kg Side table in 900 mm above OKFF with NiRo worktop, 300 mm deep, manually operated lifting door Colour scheme grey/grey, carrier anthracite Motor power drive 2 x 1.1 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries

Multi-purpose gripper, sorting gripper, gripper for weight class 7.5 - 13to unused! Manufacturer Haener Baumaschinen Model HSOG500 Condition Unused, never been in use, year of construction 2022 Weight class 7.5–13t Opening width 1500 mm Height 943 mm Width 600 mm Clamping force 48 kN/bar Net weight approx. 520 kg Operating pressure 300 bar Capacity per litre 40 L/min Stock Special price

We offer a paternoster LTG-TowerMax P 2.9-149-16-400-4220 with a completely new StoreControl P control system. Exterior Dimensions: Overall height 4,220 mm Overall width 2,600 mm Installation depth 1,150 mm 16 carriers with a payload of 149 kg each in clear usable dimensions: H = 400 mm W = 2,260 mm T = 410 mm Chain jump 254 mm Total payload up to 2,940 kg Side table in 900 mm above OKFF with NiRo worktop, 300 mm deep, manually operated lifting door Colour scheme grey/grey, carrier anthracite Motor power drive 2 x 1.1 kW / 400 Volt subject to errors and technical changes, photo of an identical machine, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries

Multi-purpose grabs, sorting grabs, grabs for weight class 2.5–3.8t unused! Manufacturer Haener Baumaschinen Model HMZG200R Condition Unused, never been in use, year of construction 2022 Weight class 2.5–3.8t Opening width 944 mm Height 601 mm Width 400 mm Clamping force 19 kN/bar Net weight 200 kg Operating pressure 250 bar Capacity per litre 15 L/min Compact Rotator Stock Special price

We offer a paternoster LTG-TowerMax P 7.2-250-29-215-4730 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 4,730 mm Overall width 3,270 mm Overall depth 1,680 mm 29 carriers with a payload of 250 kg each in clear usable dimensions: H = 215 mm W = 2,730 mm T = 620 mm Chain jump 254 mm Total payload up to 7,250 kg Side table in 900 mm above OKFF with NiRo worktop, 300 mm deep, manually operated lifting door Colour scheme grey/grey, Motor power drive 2 x 1.5 kW / 400 Volt subject to errors and technical changes, photo of an identical machine, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries

Multi-purpose grabs, sorting grabs, grabs for weight class 3.5–6.5t unused! Manufacturer Haener Baumaschinen Model HMZG300R Condition Unused, never been in use, year of construction 2022 Model HMZG300 Weight class 3.5–6.5t Opening width 1206 mm Height 747 mm Width 505 mm Clamping force 29 kN/bar Net weight 300 kg Operating pressure 300 bar Capacity per litre 25 L/min Rotator Thumm 605 Stock Special price

We offer an LTG-TowerMax L 30.0-500-1300-1270-6000 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6000 mm Overall width 1620 mm Overall depth 4150 mm Total payload machine up to 2 x 15,000 kg 20 carriers for up to 500 kg payload each in clear usable dimensions: W = 1300 mm T = 1270 mm (special depth) Usable height up to 50 to 750 mm Start of the operating opening in 300 mm above OKFF, then xxx mm high, with manually operated lifting door, Engine power Vertical drive xx kW / 400 Volt Horizontal drive xx kW / 400 Volt Colour scheme beige/beige, galvanised straps Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

W&P Haton Cone Circular Moulders Cones and knitting channels with Teflon without lubrication on request completely overhauled with newly teflosinated cone mobile on wheels with brake 380 volts

We offer LTG-TowerMax L 30.0-400-2460-825-4889 storage systems modernized by us with a completely new StoreControl L control system. currently 6 identical machines are available Exterior Dimensions: Height 4889 mm Overall width 2785 mm Overall depth 2810 mm Total payload machine up to 2 x 15,000 kg 63 carriers with center bar for up to 400 kg payload each in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 55 to 750 mm Start of the operating opening in 875 mm above OKFF, then 875 mm high Engine power Vertical drive 6 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Colour scheme grey/blue, galvanised carrier Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

Hedge trimmer for excavator attachment for weight class 1–6to unused! Manufacturer Haener Baumaschinen Model HHE120 Condition Unused, never been in use, year of construction 2022 Weight class 1–6t Width 1.200mm Net weight 48 kg Operating pressure 180 bar Liter capacity 18-21 L/min Stock Special price

Pendulum jaw with 125mm width and 160mm width available Strongest version on the market! Extremely flexible.

Control Fanuc 32i-TB Main spindle: Motor spindle technology Speed (max.) 6,500 rpm Power (max.) 7.5 kW Bar passage 38 mm Travel in Z (longitudinal turning operation) 320 mm Workpiece Clamping Collet Chuck (Type F48) Guide Bush Synchronous Running Sub-spindle: Motor spindle technology Speed (max.) 6,500 rpm Power (max.) 5.5 kW Workpiece Clamping Collet Chuck (Type F48) Pneumatic ejector Linear slides: Number of lathe chisel stations 5 Tool holder 16 x 16 mm/ 20 x 20 mm Number of stations cross drilling rig 5 Tool holder ER16/ER20 Tool drive 6,000 rpm, 2.2 kW Cross slide: Number of stations 2 Tool holder ER16 Milling operations tool drive Residual apparatus: Number of stations 8 Tool holder Ø32 mm Number of driven stations 4 Tool holder ER16 Tool drive 6,000 rpm, 1 kW Equipment/accessories: Chip Management Chip Conveyor Coolant system IKZ syste ...

Hello all We have in our stock in Istanbul turkey 16 Pieces brand new Mak M25C cylinder heads In brand new condition. We also have pistons, cylinder liners, connecting rods, Crankshafts for 8M25 engine and more spares available for Mak 8M25 Please contact us at info@fin-marine

One Way Filling line for Beer Capacity: 4000 bph Installed for 0,33 liter Stubby Bottle, 0,33 liter Steinie Bottle Holdefleiss 24 head counter pressure filler with 6 head crowner model early 70. Fimer Rinser 16 head 3-4000 bph. Year? (From kahl Schlichterle 2016) Gernep Labetta labeler 6-480 SK 3-4000 bph. Year 1996? Depall. Dansk Maskinmontasje 2016 Side Grib Conveyor, Carry Line 2016 Bottle conveyors. Dansk Maskinmontage 2016

2 roller banding machine Hunkler LAM 600; good condition; cleaned and tested; Working width 600mm; Linen pool height adjustable; suitable for cold glue. Two rollers gluing machine Hunkeler LAM 600; good condition; cleaned and checked; working widht 600mm; glue reservoir adjustable in hight; used for cold glue.

turning diameter over bed: 540 mm turning diameter over slide rest: 270 mm turning length: 2500 mm spindle passage: 60 mm turning speeds: 600 U/min Rapid travel: steady for max. workpiece diameter from: 270 mm steady for max. workpiece diameter from: 170 mm faceplate: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical baler HSM V-Press 860 plus B, built in 2019 Technical data: Manufacturer: HSM Type: V-Press 860 plus B Year of Make: 2019 Hours: 119 Pressing force: 60 t Drive power: 4 kW Filling opening: 1500 x 651 mm Filling height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Bale weight: 550 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 32.5 cbm/h Dimensions: 2099 x 1245 x 2985 mm (WxDxH) Weight: 2340 kg Materials: foil, paper, cardboard boxes Note: The press is in very good condition. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and g ...

Machine Details Stock-No. 1105-037894 Type of machine milling machining centers - vertical Make HURON Type CX 10 Year of manufacture 2001 Type of control CNC Storage location FRANCE Country of origin france Delivery time immediately Freight basis EX WORK Technical details X-Travel 1050 mm Y-Travel 510 mm Z-Travel 510 mm total power requirement 9 kW Additional information CNC HEIDENHAIN TNC 426 CHIP CONVOYEUR VERY NICE MACHINE 8000 RPM 20 TOOLS MAGASIN ISO 40

ERSA HOTFLOW 2/20 reflow oven was built in 2007 in Germany by ERSA GmbH. It is a specialist machine dedicated to reflow soldering, one of the basic soldering techniques in high-volume production of electronic components. Electronic components are joined to the printed circuit board PCB by means of solder paste, which is melted at a controlled temperature. This results in extremely durable and precise connections, which is crucial in the production of modern electronic devices. ERSA HOTFLOW 2/20 sets the highest standards in lead free reflow soldering. It allows the soldering of all, even the most thermally sensitive components on printed circuit boards PCB with a maximum width of 510 mm. The workspace consists of 20 separately controlled heating zones and 3 cooling zones with precise temperature control, which provide maximum flexibility in terms of soldering profile configuration. Th ...

Machine Details Stock number 1105-037895 Machine type machining center - vertical Brand HURCO Type VMX 40 Year of construction 2000 Control type CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight base from site Technical details x-travel 1060 mm y-travel 508 mm z-travel 650 mm Working surface 1200 X 610 mm Motor power (30 min. ED) 15 kW Distance between table and spindle 150 - 760 mm Torque 600 Nm rpm 30 min ED 22 Tool changer 30 times Ultimax 4 Control Machine weight ca. 6 t Information HURCO VMX 40 BORN 2004 CNC ULTIMAX 4 Synchronous.Thread 8000 rpm SPAENEFOERDEREr

Perfector 2/2, RCI CCI Comand Table, SAPC Semi Autoplate Change, Rolandmatic Dampening with Technotrans Cooling Refrigerator, Auto-Wash, Roland Mabeg Jet Feeder, Steel Plate on Overlap, Steel Plate on the Lining, Non-Stop Device, Super Blue, Bacher Registry System Quick Bars, Powder Sprayer, High Pile Delivery, Capacity: 15000 Sheets/h, Paper Thickness: 0,04-0,6mm, Max Paper Size: 53x74cm, Min Paper Size: 26x40cm, Start of Print: 9.5-10.5mm, Plate Format: 605x745, Plate Thickness: Max 0,3mm, Standard Accessories)

Band length: min. 3200mm, max. 3400mm With welding machine

Machine Details Stock number 1105-03796 Machine type CNC lathe Make HARDINGE Type ELITE II 8/51 Year of construction 2006 Control type CNC Control FANUC 21 I TC Storage location FRANCE Country of origin UK Delivery time by arrangement from location Off-site freight base, uninsured Technical details Turning diameter 340 mm Turning length 350 mm Control FANUC 21 I TC Speed 5,000 rpm Drive power 11 kW Number of tools 12 pcs. Number of revolvers 1 Tool holder VDI 30 Information Clamping device main spindle 3 BAKENchuck Tailstock Programming system fanuc 21 I TC 3 AXIS WITH LIVE TOOLS VERY NICE MACHINE CHIP CONVOYER

Econiche data: Drilling rig 345-31 WHT-No. 147-0338 SNr. 103 563 Linear unit M4: Fanuc, type: Beta is 4/4000 HV A06B-0064-B203 Motor: plug version with resolver Resolver line and motor cable: PM505CBL2040B 10 319V 50Hz 2.3A 3.5Nm , 3000 rpm Drill tape M3: Astro, type: ASM 46 SG10 3-400V 50/60Hz 65/60mA 4/4,8min-1 Spindle drive M1: Bonfiglioli, type: BN 132 S 6 No. 802002 Cod: 8D62030016-519951 230V / 460V 13.5A / 7.8A 50H7 940 min' 3kW cosQ 0.76 IP 55 IsKI.F Lifting drive M2: Fanuc, Type: Beta 22/2000 HV is A06B-0086-B503 Motor: in plug version with resolver and brake Resolver line and motor cable with brake: PM505CBL2020B 5 448V 50Hz 3.4A 22Nm, 2000 rpm Insert tape M10 : SEW / Maschienenbau Kitz, Type: WF 10DT56LA/TF Product number: 01.1230640901.0001.08 230V / 400V 50Hz 0.80/0.46A 0.12kW 1600 rpm cos 0.68 Delivery belt M11: SEW / Maschienenbau Kitz, Type ...

PLATEN SIZES: 2200 X 2100MM MIN MOULD HEIGHT: 650MM MOULD OPENING STROKE: 1600MM MAX DAYLIGHT: 3000MM EJECTOR STROKE: 400MM SCREW DIAMETER: 120MM INJECTION PRESSURE: 1500BAR STROKE VOLUME: 6107CM3 CONTROLS: SEF 2000 TOUCH SCREEN MOTOR: 90KW HEATING CAPACITY: 60.9KW SCREW DRIVE: HYDRAULIC CORE PULLING: 2 AIR VALVE: 2

x-travel: 4300 mm y-travel: 1000 mm z-travel: 1050 mm total power requirement: kW weight of the machine ca.: 35 t dimensions of the machine ca.: m Brand: ANAYAK Type: HVM-5000 Build in : 1997 CNC Control HEIDEHAIN, TNC 426 Tablesize: 5000 x 1000 mm X= 4.300 mm Y= 1.200 mm Z= 1.050 mm Toolchanger for 40 tools Tools: BT 50 CNC Controlled head 2,5 degrees Cooling trough the spindle Number of controlles axes: 4 machineweight 35.000 kg Moveable column The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.