133,791 used machines on RESALE, but how to find them? Machine Search
Horizon AFC 746 D - cross folder 16 pages year 2019 Counter 73 million good condition in production available immediately
Hamilton FLOW PCR Setup Instrument The Hamilton FLOW PCR Setup Instrument is a benchtop robotic workstation for fully automated preparation of PCR and qPCR reaction approaches, designed to minimize manual pipetting errors and increase sample throughput. It is typically used in conjunction with Roche Life Science products (such as the MagNA Pure 96 System and LightCycler® 480 Instrument) as part of the FLOW solution. Features and Specifications The Hamilton FLOW PCR Setup Instrument (PSU) is characterized by its precision and ability to integrate into automated workflows. Automation: It automates the pipetting and distribution of PCR components (samples, master mixes, primers) in 96- or 384-well PCR plates. Volume range: The hardware is designed for aspiration and delivery of volumes up to 1 ml. Traceability: It has automatic tracking of barcodes on accessories and con ...
Key data: 3 , 2000 kg, 2500 mm
Description, subject to prior sale Robot type: IGM RE 497-S in hanging Position Control: full digital PC-Robotcontrol, Type RCE Software: WIN 10 & Linux based System + igm Robot software K6 Welding process: 135 (GMAW), single-wire, Ø1.2 mm Welding power source: digital Invert Welding Power Source TPS 500i (500 A at 40% duty cycle) Robot periphery: Rotating boom for floor installation with 2.5 m boom length No. of Working-stations: 1 Working station: 3-axis L-Manipulator with lifting device with 2 tons nominal load capacity Security Technology: Pistol-Security-Shut-down in wrist axis Emergency Stop on Hand tablet, on Manipulators and Control Panel three-coloured warning light for the operating Status partition Security Door Technical indications, subject to error.
Dear customers currently we offer you a used tape saw with sliding table of the brand HEMA. Here are the technical data of the machine: Roll diameter: 500 mm Cutting height: 500 mm Cutting width: 1,200 mm Blade length: 5770 mm Sliding table left half of the table: 1,150 mm right half of the table: 1,200 mm Table length: 3.150 mm Sliding travel: 3,150 mm Particularities: Machine is already dismantled! New leaf guides at the top and bottom! Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.
Technical data for the top-up tabs: Manufacturer: Jung Heinrich Type: MPB The scope of delivery includes: 02x Aufstocktabschen, used Total length: approx. 400 mm Total width: approx. 129 mm Internal width: approx. 121 mm f. Frame profile width: approx. 120 mm Depth: approx. 49 mm Material thickness: approx. 4.00 mm Hole spacing i. d. depth: approx. 100 mm Hole grid i. d. width x height: approx. 85 x 100 mm BoreholeØ: approx. 10 mm Material color: blue Weight / pcs.: approx. 2,59 kg Hint: No screw material included.
Dear customers currently we offer you a used tape saw of the brand HEMA. Here are the technical data of the machine: Table: 800 x 750 mm Cutting width: 680 mm Super cutting height: 480 mm Roll diameter: 700 mm Saw blade length: 5,000 - 5,150 mm Power: 3 kW Speed: 1,400 rpm Precision table swivel device with handwheel and rack Engine brake Dimensions: 1,290 x 800 x 2,300 mm Weight: approx. 580 Kg Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.
Depalletizer is used for unloading new bottles, delivered on pallets. After clamping one whole row from bottles layer by gripping head, the device delivers them to the unloading table, and the bottles are transported to the washing machine or filling machine. The device is designed to work independently in line, for glass and plastic bottles with different capacity. Depalletizer DNB-2022 consists of four components: 1. spring mobile wire rope hoist 2. a gripping head adapted to the type of bottles 3. table - unloading conveyor / adapted to the type of bottles, pallet and the room for the assembly of the depalletizer. 4. a beam made of structural steel attached to the ceiling of the room or mounted on supports. Capacity up to 6 000 bottles / hr. - Operation - 1 person - Dimensions of bottles: - diameter 20 to 120 mm - height from 50 to 350 mm - Lifting height to ...
Stainless steel pressure filter, EDFR-D-060-G-530-1-V-1, 400bar, Hydac, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.
x-travel: 6300 mm y-travel: 1200 mm z-travel: 2000 mm Control: total power requirement: kW weight of the machine ca.: 57 t dimensions of the machine ca.: 7000x1300x5000 mm Brand: Anayak Type: HVM7000 CNC brand: Heidenhain Year of make: 1997 Table length: 7.040 mm Table width: 1.000 mm X: 6.300 mm Y: 1.200 mm Z: 2.000 mm max. 3000 Rpm Machine dimensions (lxwxh): 7000 x 1300 x 5000 mm Machine weight: 57.000 kg including 6 angleplates 2500 x 700 mm this machine is in perfekt working order and can be inspected under power The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45
Leybold Optics H3200 it is a horizontal inline sputtering system H3200 for the separation of Cu - In-Ga layers, glass substrates, which are coated from above, run continuously in this, it is a universal system for glass coating / architectural glass coating with 3 large process chambers and 8 infeed and discharge modules 3 modules of 650 mm run side by side in the process the plant is as good as unused, (it did not come to production, only sporadic attempts), is already dismantled and stored in the north of Brandenburg Year of construction 2009 , plant number 070817 Type H3200 Original price of the inline sputtering system (2009): 5.600.000,- € the sales price is net plus VAT incl. loading and transport for Germany Dimensions : 24,335 m x 4,30 m Weight: approx. 120 t the three process chambers are special transports incl. all parts and document ...
Work spindle, drill spindle, Tool spindle, HSK 40, AD68mm, Mapal, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation and is in a completely mint condition. Work spindle, drilling spindle, tool spindle from Mapal, - tool holder HSK 40, incl. flinger ring and cover ring, - Length bearing body 129 x D 68mm, 5 roller bearings AD 68 mm, - Incl. Rotex coupling with gear rim drive side for shaft D25 mm, - Overall dimensions: 270 mm x D 68 mm, 5kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we wi ...
Work spindle, drill spindle, Tool spindle, HSK 50, AD80mm, Mapal, mint condition Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation and is in a completely mint condition. Work spindle, drilling spindle, tool spindle from Mapal, - tool holder HSK 50, incl. flinger ring and cover ring, - Length bearing body 149 x D 80mm, 5 roller bearings AD 80mm, - Incl. Rotex coupling with gear rim drive side for shaft D35mm, - Overall dimensions: 305mm x D 80mm, 8kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. Howev ...
Working spindle, drilling spindle, tool spindle, HSK 63, AD80mm, Mapal, as good as new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has been in stock there for some time but has never been in operation and is completely new Working spindle, drilling spindle, tool spindle from Mapal, - Tool holder HSK 63, incl. centrifugal ring and cover ring - Length of bearing body 149 x D 80mm, 5 rolling bearings AD 80mm, - Incl. Rotex coupling with gear rim drive side for shaft D35mm - Overall dimensions: 305mm x D 80mm, 8kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and w ...
Paper drilling machine Hang 114-30-4; good condition; cleaned and tested; 4 drill heads; drill lubrication; drilling cooling; speed regulation; Table lifting speed adjustable; Drilling distance 36-260mm; Insertion depth 6-130mm; Insert height max.65mm; endless drilling tape; Table size 600x480mm; new table; new hood; new belts. Paper drilling machine 114-30-4; good condition; cleaned and checked; four heads; drill cooling; lubricating device; variable drill speed; table lift speed adjustable; adjustable drill offset 36-260mm; insertion depth 6-130mm; stack height 65mm; cardboard band under drill; table size 600x480mm; new table; new cover; new belts.
saw-blade dia.: 315 mm cutting capacity - round: 100/ 90° mm cutting capacity - square: 90 x 90 /90° mm cutting capacity - flat: 85 x 110 / 90° mm cutting capacity - flat: 85 x 85 / 45° mm cutting capacity - round: 100 / 45° mm cutting capacity - square: 85 x 110 /45° mm saw blade turning speeds: 25 / 50 U/min voltage: 400 V / 50 Hz Motor output: 1 kW machine weight ab.: 240 kg Dimensions (L/W/H): 980 x 790 x 780 mm • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw-blade dia.: 370 mm cutting capacity - round: 115/ 90° mm cutting capacity - square: 110 x 110 /90° mm cutting capacity - flat: 110 x 110 / 90° mm cutting capacity - flat: 100 x 100 / 45° mm cutting capacity - round: 115 / 45° mm cutting capacity - square: 100 x 100 /45° mm saw blade turning speeds: 22 / 44 U/min voltage: 400 V / 50 Hz Motor output: 3 kW machine weight ab.: 270 kg Dimensions (L/W/H): 980 x 790 x 780 mm • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dreh-Øüber Bett: 320 mm Dreh-Øüber Support: 185 mm turning length: 1000 mm Spindelbohrungs -Ø/ Aufnahme: 32 mm mm spindle turning speed range: (12) 85 - 2000 U/min feeds - longitudinal: 0,006 - 1,77 mm/min feeds - cross: 0,003 - 0,888 mm/min thread - mm pitch: 0,1 - 28 mm thread - module: 0,1 - 1,75 mm thread - inch: 2,5 - 75 inch. voltage: 400 V / 50 Hz power capacity: 2,2 kW weight of the machine ca.: 0.8 t dimensions of the machine ca.: 1,8 x 0,8 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below. 1 Quickmelt incl. evaluation device level.
Dear customers currently we offer you a used tape saw of the brand HEMA. Here are the technical data of the machine: Table: 1,275 x 895 mm Cutting width: 780 mm Super cutting height: 640 mm Roll diameter: 800 mm Saw blade length: 6,000 mm Power: 4 kW Speed: 1,650 rpm Precision table swivel device with handwheel and rack Engine brake Dimensions: 1,500 x 950 x 2,700 mm Weight: approx. 720 Kg Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.
For sale is a BOXMAKER® cardboard machine from Horstmann Maschinenbau for the flexible production of tailor-made shipping boxes – exactly in the required size and quantity. Your advantages at a glance: • Producing cartons "just in time" – individually controllable via touch panel • Reduction of storage costs and filling material • Reduction of shipping costs through custom-fit packaging • Less transport damage, higher customer satisfaction • Processing of continuous cardboard or sheets, complex cuts possible Ideal for industry, wholesale, fulfillment and e-commerce that want to make packaging processes more economical, sustainable and independent.
Dear customers currently we offer you a used tape saw of the brand HEMA. Here are the technical data of the machine: Table: 540 x 600 mm Cutting width: 480 mm Super cutting height: 385 mm Roll diameter: 500 mm Saw blade length: 4,080 mm Power: 2.2 kW Speed: 2,800 rpm with engine brake Dimensions: 810 x 945 x 1,970 mm Weight: approx. 210 Kg Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.
Dear customers currently we offer you a used tape saw of the brand HEMA. Here are the technical data of the machine: Table: 540 x 600 mm Cutting width: 380 mm Super cutting height: 300 mm Roll diameter: 400 mm Saw blade length: 3,320 mm Dimensions: 815 x 640 x 1,820 mm Weight: approx. 230 Kg Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.
Channel baler Presto HPK 50 HS, built in 2014 Manufacturer: Presto Type: HPK 50 HS Year of Make: 2014 Drive: 30 KW Press force: 50 t Hours: 7145 Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Materials: paper, cardboard, foil, PET bottles Note: Knives and counter-blades as well as all sliding plastics have been replaced. The press is in good condition and has been inspected and tested. You can find a video on our website or YouTube channel. The user manual and CE declaration are available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability f ...
Głowice do wytłaczania - pakiet 19 sztuk różnych narzędzi, m.in. Kalibrator głowicy + płyty Głowica + kalibrator 2 x 130 Głowica 250 mm + kalibrator Austria Głowica + kalibrator Duża głowica rozszerzająca + kalibrator Mała głowica rozszerzająca + kalibrator Głowica + kalibrator dla Soffit 2 x 160 głowic Głowica parapetu 260 mm cena za wszystkie narzędzia 60.000 Euro.
1 Quickmelt incl. evaluation device level. Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below.
Dear customers currently we offer you a used tape saw of the brand HEMA. Here are the technical data of the machine: Cutting width: 865 mm Super cutting height: 700 mm Roll diameter: 900 mm Saw blade length: 6,550 mm Power: 5.5 kW with engine brake with CE incl. blade guide for particularly wide band saw blades! Dimensions: 1,630 x 1,080 x 2,825 mm Weight: approx. 950 Kg Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.
The reverse osmosis system is used for the desalination of softened water with a salt content of up to 1,000 mg/l. It is equipped with a high-quality centrifugal pump with frequency converter (FU). Frequency control reduces electricity costs by 30 - 50 %, extends the life of the system and keeps permeate production constant regardless of operating pressure. The RO digital microprocessor control enables fully automatic operation with logging of all relevant operating data and freely adjustable limit values. The system can be connected to the central control system via optional interfaces. Advantages : Equipping with FU saves 30 - 50 % on electricity costs, keeps permeate production constant and enables longer service life and particularly quiet operation Versatile RO digital control with storage, operating data and many setting options Optional equipment with PLC Siemens S7-1200 ...
Dear customers currently we offer you a used disc or disc grinding machine for model and mold making of the brand HoPa. Here are the technical data of an S 650 machine: Disc diameter: 600mm Table length: 950 mm Table width: 470 mm Table working height: 900 mm Table swivel: 30/45° Schraegan stop: 60/60° Power: 2.2 kW Speed: 1,000 rpm Right-left rotation Emergency stop with engine brake Dimensions: 110 x 85 x 140 cm Weight: 315 kg Documentation incl. CE and declaration of conformity available! Accessories such as inclined stops, adhesives and grinding wheels included. We look forward to your questions and inquiries!
Make: HERMA Type: 362E S Year of Make: 2021 Serial No.: 857430 In the current production, the following products have been labeled: Wall-mounted dispenser bottle: 1000 ml WSP Length x Width (mm): 79.5 ± 1.5 x 102 ± 1.5 Height (mm): 197 ± 1.5 Label Height x Length (mm): Front Label: 97 x 57 Back Label: 97 x 55 Booklet 2 Handle Bottle "2000 ml" Length x Width (mm): 157 ± 2 x 85 ± 1 Height (mm): 308.5 ± 2.5 Label height x length (mm): Front side label: 128 x 80 Back label: 128 x 80 Booklet lid label: 95 x 25 Dismantling / packaging / loading by specialist companies: - Dismantling of two-sided labeller Fabr.: HERMA - Plant components are mounted on wooden pallets and marked - Disassembling the system, packing and transporting it from production to the outdoor area. - Securing the components on Euro pallets with strapping and stretch film - Loading onto trucks
pressure: 30 t stroke: 400 mm daylight longitudinal/sideways: 720 x 295 mm dayligth: 900 mm liter capacity: 6,0 l feed down: 7,5 mm/sec feed up: 12,5 mm/sec Motor output: 3,0 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,35 x 0,85 x 2,2 m High-quality, hydraulic press can be used either by hand or by motor operate. Cylinders can be moved sideways. Safety valve at cylinder end position. CE marking 2 year guarantee The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Single-column press with 15 T power suitable for continuous shift operation (a) travel speed 10 mm downwards; b) Opening speed up to 25 mm/sec c) Starting pressing speed 10 mm/sec d) Table size 400x400 mm e) Ram size 200x200 mm, with T slots and central cylinder tension f) Total size approx. 1150x800x1750 mm g) Oil temperature display on the oil tank h) Pressure adjustment from 5 T to 17 T (adjustable via rotary control) i) Two-speed hand lever operation j) Machine body powder-coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Installation, commissioning, instruction against separate charge Press type single-column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. ( at 250 bar ) 150 kN Free tear-off force max. 10 kN Pressure build-up time Closed tool Stee ...
Honda Emergency Power Generator 8 kVA - NEW with E-start, AVR ESC, 45 litre tank - - - - - Engine - Honda GX390 - 1 cylinder - Air-cooled - - - - - Generator - Manufacturer: NSM, Italy - Power: 7.7 / 8 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hz. - - - - - Start System - Electric starter via ignition lock - Start by cable pull also possible - - - - - Facilities - Large 45 liter tank - AVR regulator (for exact voltage compliance) - Electric start - Oil level sensor - Overload protection - Sockets: 1x 230 V, 1x 400V 16A - - - - - Additional equipment (optionally orderable) - Wheelset + push rods - Service kit for initial maintenance - 2.5 mtr. Flexible exhaust hose - - - - - Other data: - Dimensions: 79 x 58 x 65 cm - Weight: 99 kg - Consumption: approx. 2.0 ltr. (50%) / 2.7 ltr. (75%) - - - - - Shipping: - Germany-wi ...
HONDA generator set 9 kVA - NEW Soundproofed - Stage V emission standard - - - - - Engine: - Honda - Model: GX390 - 1 cylinder - Gasoline - Air-cooled - Displacement: 389 cc - - - - - Generator: - Manufacturer: NSM (Italy) - 7.7 / 8.5 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hertz - AVR regulator - - - - - Starting unit / control unit: - Ignition lock for starting and stopping - ATS interface, for easy plugging in of an ATS automatic start box - Hour meter - 1x 400V 16A socket - 2x 230V socket - - - - - Equipment: - AVR voltage regulator (so sensitive devices can also be operated) - Electric start - Oil pressure sensor - Overload protection - Automatic start interface (ATS connection) for easy plugging in / retrofitting of an automatic start box - Stage V emission standard: The device can therefore also be used for mobile application ...
Honda Emergency Power Generator 7 / 8 kVA NEW with E-start and AVR controller - - - - - Engine - Honda GX390 - 1 cylinder - Air-cooled - 389 cc - - - - - Generator - Power: 7 / 7.7 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hz. - AVR regulator - - - - - Start System - Electric start via ignition lock - Start by cable pull also possible - - - - - Facilities - Electric start - AVR regulator (for exact voltage compliance) - Sockets: 1x 230 V, 1x 400V 16A - - - - - Additional equipment (optional for an extra charge) - Wheel set + push bars: 120 € net - - - - - Other data: - Dimensions: 79 x 57 x 68 cm - Weight: 101 kg - Consumption: approx. 1.5 ltr. (50%) / 2.1 ltr. (75%) - - - - - Shipping: - Germany-wide transport including unloading is possible for an extra charge - To be able to quote an exact freight price, please sen ...
maximum number of results exceeded
please refine your search
