65 offers demag ergotech

Category: 301: injection moulding machines
approved
dealer
New in: 2001
Price: request quote
Location: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Seller: Maschinenhandel Borowski GmbH

DEMAG ERGOtech 100-420-200 warehouse no.: 502748 manufacturer: DEMAG Typ: ERGOtech 100-420-200 Controller Unit: NC4 year of construction: 2001 operating hours: 58764 h technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: four tie bars clamping force: 1000 kN distance between tie bars h: 420 mm distance between tie bars v: 420 mm size of mould plates h: 590 mm size of mould plates v: 590 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 150 mm ejector force: 41 kN centring device diameter of moving platen: 85 mm centring device diameter of fixed platen: 125 ...

Category: 301: injection moulding machines
approved
dealer
New in: 2001
Price: request quote
Location: Complast - Pegnitz
Seller: Complast Gmbh

screw size:18 mm injection shot weight in Polysterol:20 g clamping force:600 kN : INJECTION UNIT: screw size:18 mm max. swept volumne:23 cm³ injection shot weight in Polysterol:20 g/PS injection pressure:2.870 bar : CLAMPING UNIT: closing pressure:60 t tie bar distance:370 x 370 mm mould hight - min.:210 mm opening stroke:400 mm : CONTROL: microprocessor control:NC4 screen text:deutsch Manual:deutsch : EQUIPMENT: robot interface:Euromap 12 core pull:nein without hopper / without water distributor: : OTHER DATAS: pump drive power:15,0 kW total connection power:20,0 kW total weight:3.400 kg :3,7 x 1,4 x 2,0 m Payment: 100% prior to delivery

Category: 301: injection moulding machines
New in: 2000
Price: 15.000 €
Location: Land-dk DK 3050 Humlebaek, Bakkegaardsvej 312
Seller: Normann & Kock

Hersteller/Manufacturer: Demag Typ/Type: El Eis S Baujahr/Year: 2000 Steuerung/Controller: NC 4 Schliesskraft/Clamping Force: 1000 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plattengroesse/Platen Size: 600 mm x 600 mm WZ Einbauhoehe/Mould hight: min 200 mm Oeffnungsweg/opening stroke: 380 mm Plattenabstand max/Max. Open Daylight: 810 mm Schnecke/Screw size: 22 mm Hubvolumen/Shot volume: 42 ccm / 40 gram PS spez. Spritzdr./injection pressure: 2400 bar Allgemein/General Motor/Motor Power: 15 kW (Heizung/Heating Power: 5,1 kW Abmessungen/Dimensions: 4,6 m x 1,4 m x 2,20 m Gewicht/Weight: ... 9 HZ zonen, Kernzug 1 kreis, 2/2 ein aus gang ...

Category: 301: injection moulding machines
approved
dealer
New in: 2004
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

De MAG Ergotech extra 350-80 Year of construction: 2004 Injection unit: Screw diameter: 25 mm Shot weight: 48 g / PS Injection pressure: 1590 bar Dispensing volume: 54 cc Clamping unit: Clamping force: to 35. Clear width between columns: 280x280mm Tool clamping plate sizes: 410 x 410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC IV Additional equipment: Hot channel control Air valve x 1 Built-in printer used to print the machine store Dimensions and weights: Weight: 2550 kg Length/width/height: 3.2 x 1.3 x 1.8 m Price: On request

Category: 301: injection moulding machines
approved
dealer
New in: 2004
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Demag Ergotech system 60/370-80 Year of construction: 2004 Injection unit: Screw diameter: 22 mm Shot weight: 37 g Injection pressure: 1920 bar Dispensing volume: 42 cc Clamping unit: Clamping force: 60 t Tie bar distance: 370 x 370 mm Size of the clamping plates: 540 x 530 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC 4 Additional equipment: Machine in excellent technical condition Hydraulic core pulling x 1 Air valve x 2 Control hot-channel x 12 Injection unit cured - bi It is possible the screw diameter for DIA 25 mm Dimensions: Weight: 3500 kg Length/width/height: 3.74 x 1.34 x 2.03 m Drive: Pump/motor: 22 kW Heating capacity: 5,1 kW Cy ...

Category: 301: injection moulding machines
approved
dealer
New in: 2002
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

De MAG Ergotech El Exis E 60-200 / electric machine Year of construction: 2002 Injection unit: Screw diameter: 30 mm Shot weight: 100 g Injection pressure: 1911 bar Dispensing volume: 106 cc Clamping unit: Clamping force: 60 t Tie bar distance: 370 x 370 mm Clamping plate sizes: 600 x 600 mm Ejector: electric Clamping unit: knee lever Control: NC 4 Additional equipment: The high-speed, energy-saving and quiet working machine EUROMAP 12 Robot interface Hydraulic core pulling x 1 Air valve x 2 Injection unit cured - bi Central lubrication system Parallel movements Dimensions: Weight: 6500 kg Length/width/height: 4.2 x 1.4 x 1.9 m Price: On request

Category: 301: injection moulding machines
approved
dealer
New in: 1996
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Demag Ergotech compact 1000-310 with robots by the mark Wittmann Built in 1996 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2020 bar Dosing volume: 168.3 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 400 x 400 mm Size of the clamping plates: 580 x 590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC 4 Additional equipment: EUROMAP Robot interface Core move x 1 Control air valve Hot channel control Dimensions: Weight: 4200 kg Length/width/height: 4.2 x 1.4 x 1.9 m Drive: Pump/motor: 18.5 kW Heating capacity: 9.4 kW Cylinder heating: 27.9 kW Price: On request

Category: 301: injection moulding machines
approved
dealer
New in: 1995
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Demag Ergotech system 2000-840 Year of construction: 1995 Injection unit: Screw diameter: 45 mm Shot weight: 320 g Injection pressure: 2402 bar Dispensing volume: 358 cc Clamping unit: Clamping force: 200 t Tie bar distance: 560 x 560 mm Size of the clamping plates: 830 x 830 mm Ejector: hydraulic Clamping unit: knee lever Control: NC 4 Additional equipment: EUROMAP 12 Robot interface Air valve x 1 Hydraulic core pulling x 2 Control hot-channel x 12 Central lubrication system Additional pump to oil cleaning/filter Dimensions: Weight: 9000 kg Length/width/height: 5.70 x 1.70 x 2.10 m Drive: Pump/motor: 30 kW Heating power: 13 kW Cylinder heating: 43 kW ...

Category: 301: injection moulding machines
approved
dealer
New in: 2001
Price: 60.000 €
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Package of 2 Demag machines: DEMAG Ergotech system 4200-840 and DEMAG Ergotech system 3500-840 Demag Ergotech system 4200-840 Year of construction: 2001 Injection unit: Screw diameter: 45 mm Shot weight: 320 g Injection pressure: 2402 bar Dispensing volume: 358 cc Clamping unit: Clamping force: 420 t Tie bar distance: 800 x 710 mm Clamping plate sizes: 1200 x 1100 mm Ejector: hydraulic Clamping unit: knee lever Control: NC 4 Additional equipment: Hybrid machine EUROMAP Robot interface Control air valve Hydraulic core pulling x 2 Auto tool installation height Central lubrication system Built-in printer to print out the machine history It is possible to change ...

Category: 301: injection moulding machines
approved
dealer
New in: 1994
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Closing force: 80t, weight: 3.7t, operational hours: 20,000h.

Category: 301: injection moulding machines
approved
dealer
New in: 1995
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Demag Typ/type: Ergotech 80-310 system year/year: 1995 Control/controller: NC 4 Close type/clamping type: Hydraulic / hydraulic Clamping force/clamping force: 800 kN Holmabstand/Dist.Betw.Tiebars: 400 mm x 400 mm Disk size/platen size: 580 mm x 590 mm WZ height/mould hight: min 210 mm Opening/opening stroke: 400 mm Plate distance of max/Max open daylight: 610 mm Auger/screw size: 35 mm Stroke volume/shot volume: 168 CC / 149 gram PS spec. Spritzdr / injection pressure: 2020 bar General / General engine power: 18.5 kW Heating/heating power: kW 8,8 Dimensions/dimensions: 3.9 m x 1.4 m x 1.9 m Weight/weight: 3700 kg-additional equipment/additional equ ...

Category: 301: injection moulding machines
approved
dealer
New in: 2001
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Demag Typ/type: Ergotech 125/475-440 concept Year/year: 201 Control/controller: MC 4 control Close type/clamping type: knee lever/toggle Clamping force/clamping force: 1250 kN Holmabstand/Dist.Betw.Tiebars: 475 mm x 450 mm Disk size/platen size: 690 mm x 660 mm WZ height/mould hight: 230 min max 460 (560 mm) Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 910 mm (1100 mm) Auger/screw size: 35 mm Stroke volume/shot volume: 177 CC / 160 gram PS Spritzdr / injection pressure: 2423 bar General / General engine power: 22 kW Heating/heating power: 8,3 kW Dimensions/dimensions: 4.9 m x 1.6 m x 2.1 m Weight/weight: 6600 kg Screen ...

Category: 301: injection moulding machines
approved
dealer
New in: 2001
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Closing force: 2000kN, injection pressure: 1946bar, screw diameter: 50mm, max. opening stroke: 570/ 1235mm, ejection stroke: 178mm, weight: 10.95t.

Category: 301: injection moulding machines
approved
dealer
New in: 2001
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Closing force: 2500kN, injection pressure: 1946bar, screw diameter: 50mm, max. opening stroke: 675mm, ejection stroke: 200mm, weight: 12.6t.

Category: 301: injection moulding machines
approved
dealer
New in: 2001
Price: request quote
Location: Land-pl PL 75816 Koszalin, Polczynska
Seller: TADplast

DEMAG ERGOTECH 250/630 - 1450 + robot Neureder Year of production: 2001 TECHNICAL DATA Screw Dia [mm]: 60 Shot Weight [g]: 690 Injection Pressure [bar]: 1905 Clamping Force [kN]: 2500 Tie Bar Distance [mm]: 630 x 630 Platen Size [mm]: 950 x 950 Mould Height min. [mm]: 330 CONTROL Type of Controls: NC4 Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 60 Workinghours [h]: 48517 Dimensions [m]: 6,5 x 1,9 x 2,3 Weight [kg]: 13100 CR - CORE PULL 2x GR - EUROMAP ZP - AIR VALVE 4x

Category: 301: injection moulding machines
approved
dealer
New in: 1993
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

Injection molding machine Demag ergotech 50-200 Nkxip YEAR 1993 Demag 50 5715nach Pumpenwechs. 50t 530 x 520 355 x 355 30mm 94 g approx. 3t no core pulling Yes robot interface Yes throw-out. Yes Indrusion 2008 pump new 2009 new drive motor Sprue picker on MASCH. mounted (NC4 25-100) programmable over Maschinensteuerg.

Category: 301: injection moulding machines
approved
dealer
New in: 2002
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Closing force: 250kN, distance between tie-bars: 280x280mm, max. opening stroke: 315mm, min. tool installation height: 160mm, tool clamping plates dimensions: 460x450mm, screw diameter: 18mm, controls: DEMAG ergo control, length: 3500mm, width: 1200mm, height: 2000mm, weight: 2.55t, operational hours: ca. 70,000h, including Crane DEMAG: load capacity: 250kg and Robot DEMAG.

Category: 301: injection moulding machines
approved
dealer
New in: 2001
Price: request quote
Location: Land-uk UK WF1 5 WAKEFIELD, 40 THORNES LANE
Seller: D&M MACHINERY LTD

MAKE/MODEL: DEMAG ERGOTECH SYSTEM 1100 - 120H 80V YOM: 2001 TON: 110 DBTB: 450 X 450

Category: 301: injection moulding machines
approved
dealer
New in: 2005
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

4 PCs Demag injection-moulding machines, of which 3 pieces 50 t and 1 100 t.

Category: 301: injection moulding machines
approved
dealer
New in: 1996
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

Injection molding machine Demag Ergotech 35-80 Year of construction: 1966 Schneckendruchmesser: 18 mm Bebkq73i7y Clamping force: 350 kN maximum injection pressure: 2,400 bar September 2016: Rotex star pump drive changed March 2016: renewed headpiece plasticizing cylinder

Category: 301: injection moulding machines
approved
dealer
New in: 1996
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

Injection molding machine Demag Ergotech 35-80 Year of construction: 1996 Screw diameter: 18 mm Clamping force: 350 kN maximum injection pressure: 2. 400 bar January 2017: completely new cylinder with screw, non-return valve and lace October 2016: Rotex sprocket changed from the pump drive February 2014: Replaced electric motor pump drive

Category: 301: injection moulding machines
approved
dealer
New in: 2004
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

Injection molding machine Demag Ergotech system 50/370-200 Year of construction: 2004 Screw diameter: 30 mm Clamping force: 500 kN maximum injection pressure: 1,995 bar August 2017: full gasket change ejector cylinder September 2016: active cylinder/quantities translator new sealed September 2015: Pumpe2 replaced by regenerated

Category: 301: injection moulding machines
approved
dealer
New in: 2002
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

Injection molding machine Ergotech 350-870 Year of construction: 2002 Screw diameter: 25 mm Clamping force: 500kN maximum injection pressure: 2.743 bar Accessories: Belt and roller June 2018: newly built driving beams for injection unit Si0psdzl May 2017: hydraulic motor (dose) changed) April 2017: completely new cylinder with screw, non-return valve and lace March 2015: Renewed Pumpe1, sequence valve, control valve and pressure sensor (current operating hours approximately 17, 000 h)

Category: 301: injection moulding machines
approved
dealer
New in: 1996
Price: request quote
Location: Land-de DE 08018 Kaiserslautern, Trippstadter Str. 110
Seller: GINDUMAC GmbH

Brand: DEMAG Model: Ergotech 330-2300 Application Type: Injection Moulding Machine Type: Injection moulding machines Availability: Immediately Production Year: 1996 Location: Germany Origin Country: Germany GENERAL DATA Measurements width: 6500 mm Measurements depth: 2000 mm Measurements height: 2300 mm Machine weight: 15000 kg CONTROL UNIT Brand: DEMAG Model: NC4 CNC main language: German CNC language customizable: Yes INJECTION UNIT Screw diameter: 60 mm Shot weight: 800 g/PS S troke volume: 891 cm3 Injection pressure: 2420 bar Heating capacity: 23 kW CLAMPING UNIT Clamping force: 3300 kN Opening stroke: 675 mm Distance between bars: 710x630 mm M ...

Category: 301: injection moulding machines
approved
dealer
New in: 1997
Price: request quote
Location: Land-de DE 08018 Kaiserslautern, Trippstadter Str. 110
Seller: GINDUMAC GmbH

OVERVIEW Brand: DEMAG Model: Ergotech 330-2300 Application Type: Injection Moulding Machine Type: Injection moulding machines Availability: Immediately Production Year: 1997 Location: Germany Origin Country: Germany GENERAL DATA Measurements width: 6500 mm Measurements depth: 1900 mm Measurements height: 2300 mm Machine weight: 15000 kg CONTROL UNIT Brand: DEMAG Model: NC4 CNC main language: German CNC language customizable: Yes INJECTION UNIT Shot weight: 2420 g/PS Stroke volume: 60 cm3 Injection pressure: 891 bar Plasticising rate max: 800 g/s PS CLAMPING UNIT Clamping force: 3300 kN Opening stroke: 675 mm Distance between bars: 710x630 mm Mould he ...

Category: 301: injection moulding machines
approved
dealer
New in: 1993
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Krauss Maffei Typ/type: KM 110-390 C1 Year/year: 1993 Control/controller: MC 4 Clamping force/clamping force: 1500 kN Holmabstand/Dist.Betw.Tiebars: 500 mm x 500 mm Disk size/platen size: 750 x 750 mm WZ height/mould hight: min 250 max 500 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 1060 mm Auger/screw size: 50 mm Stroke volume/shot volume: 442 CC / 394 gram PS Spritzdr / injection pressure: 1946 bar General / General engine power: 30 kW Heating/heating power: 14,8 kW Dimensions/dimensions: 5.5 m x 1.6 m x 2.10 m Weight/weight: 5600 kg Screen text: German Options/optional extras Core puller / core pulling: x 1  ...

Category: 301: injection moulding machines
approved
dealer
New in: 1997
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Demag Typ/type: Ergotech 35-120 Year/year: 1997 Control/controller: NC 4 Clamping force/clamping force: 35 to Holmabstand/Dist.Betw.Tiebars: 280 mm x 280 mm Disk size/platen size: 410 x 410 mm WZ height/mould hight: min 350 mm Opening/opening stroke: 530 mm Plate distance of max/Max open daylight: 880 mm Auger/screw size: 25 mm Stroke volume/shot volume: 61 ccm / 54 gram PS Spritzdr / injection pressure: 1890 bar General / General engine power: 13,5 kW Heating/heating power: 6,8 kW Dimensions/dimensions: 3.05 m x 1.3 m x 1.65 m Weight/weight: 2300 kg Screen text: German Options/optional extras EUROMAP

Category: 305: peripheral equipment (e.g. heating,cooling,drying)
approved
dealer
New in: used
Price: 2.000 €
Location: Leipziger Straße 32, 06108 Halle, DE
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: 4 temperature control device Wittmann 1xTempro Primus-C, 3 x digicolor X-2003 Info from the net: Single circuit temperature control unit (90 ° c). Indirect cooling with same heat exchanger as well as same submersible pump with high capacity as at the TEMPRO Primus-C; 90. By default with leak stop operation and switch to the suction during die changes. The device was acquired in the context of the acquisition of an insolvent company. It is not in use and stored 1. Manufacturer: WITTMANN GmbH, Nuremberg Series: TEMPRO-Primus/C; 90 Type: T4A3A1S00_01_00 Year of construction: 100/2008 No. TP00000190 Connection: 3 x 415V 11A 7kW Dimensions: H = approx. 670 mm, T = 500 mm ...

Category: 1102: engines
approved
dealer
New in: used
Price: 590 €
Location: Leipziger Straße 32, 06108 Halle, DE
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Electric motor flange motor FOM 200 18.5 kW 380/420V / 660-720V shaft 55 mm Bolt circle diameter 350 mm The electric motor comes from a wallpaper factory spare parts stock. He is in stock. He is dusty externally due to storage. . Technical data Electric motor type: FOM 200 A 6 Manufacturer:? Motors GmbH... No. 04080401 Year of manufacture: Voltage: 380/420V / 660-720V 50/60 Hz Drtehzahl: 970 rpm at 50 Hz Power: 18.5 KW S1 at 50 Hz COS phi: 0.81 Power: 38.6 / 21.1 A IP 55 Shaft diameter: 55 mm Bolt circle diameter: 350 mm Weight: 225 kg More assets at MS written out as follows in the offer: Transformer fig. 3 ~ 20(15) kV / 400 V 630 kVA year 2014 -Driving m ...

Category: 301: injection moulding machines
approved
dealer
New in: used
Price: 2.000 €
Location: Land-DE Germany, 06112 Halle
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Cylinder & screw D 110 mm injection molding machine Windsor 20000 kN The parts were supplied in a previous project which came not to run. be sure to visit! Technical data Manufacturer: Windsor Cylinder: for clamping force: 20000 kN or more Length: 4010 mm Diameter outside: approx. 280 mm Diameter internal: approx. 110 mm for appropriate mixing screw Number of the packaging: 62134-2; 80193; 063259 : Weight 2013 Packaging: see Transport box photo Screw mixing screw more than one zone Screw diameter: 110 mm Length: 4000 mm Nr of the packaging: 62136 Weight: 805 LBS 385 kg Weight of packaging: 5.25 x 162 \" Packaging: see Transport box photo Condition: new, i ...

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: 490 €
Location: Land-DE Germany, 06112 Halle
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: from a business resolution Mobile oil filtration system Ørsta hydraulic 16/25-S 3 ~ 380V, 1.1 kW t I Magnetabscheider(permanent) div. pressure hoses and Ölzapfpistol repairs (key switch, overhauled and cleaned on chassis ? for the removal of particles 25 ?m from the oil circuit of injection moulding machines or machine tools. Technical data Manufacturer: VEB ØRSTA hydraulic Schwerin Type: 16/25-S No. 7186 Nominal pressure: 16 MPa Nominal flow rate: $16 / min Nominal Filter fineness: 25 ?m Pump: 1.0/16 No. 225286 Pump capacity: 1 m ³/h Mass approx.: Width 60 cm Depth: 60 cm Height: 120 cm Accessories: power cable, suction and pressure hose, oil nozzle type  ...

Category: 1402: other machines for mechanical handling
approved
dealer
New in: used
Price: 1.000 €
Location: D - Sachsen-Anhalt
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Conveyor belt conveyors 1250 x 370 mm with Drehzahlsteueung + hot-air blower in height and angle adjustable, fahrlbar on 4 wheels, functional. Manufacturer: unknown Type:? No.? Year of construction:? Band dimensions: 370 x 1250 Mass installation: 650 x 1350 Height: 10 cm Angle: adjustable Mobile: Yes on 4 wheels Connection: 230V 50 Hz Engine: RF 0.12/4-7R Connection: 380/220V 0.12 kW Speed control through: Frequency converter: Moeller DF4-120-037 Input: 1/N/PE AC 230V 5A 50 Hz Output: 3/AC 0-230V 2.6 A 0.37 kW Hot air blower Karl Leiter CH Type: Hotwind S 901 Connection: 220V 3400 / motor 50W 2 mbar 550 l/min Weight approx. 200 kg State. used see photos ...

Category: 308: other machines for plastic
approved
dealer
New in: 1995
Price: 16.900 €
Location: Leipziger Straße 32, 06108 Halle, DE
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Central Pellet drying dry air dryers Digicolor 26.5 kW with molecular sieve The system is functional still in operation. You are übernmommen in the framework of a factory takeover. Due to a Geschäfsumstelllung and or new acquisition at our customer be she no longer needed and sold. Still, the display is updated. Manufacturer: digicolor Bielefeld Type: DEHUVIDIFYNG DRYER Model: D 122 MT Baijahr: 1995 Hopper: 6 a ca. 120 l in 2 tables approx. 500 x 120 cm total height 220 cm Cabinet Trochenluft production with molecular sieve ca 100 x 100 x 200 cm Schalts - and control cabinet ca 100 x 80 x 200 cm 26.5 kW. Supply: 380 V ~ 50 Hz State. Plant is still in operation,  ...

Category: 301: injection moulding machines
approved
dealer
New in: used
Price: 2.500 €
Location: Land-DE Germany, 06112 Halle
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Cylinder & screw D 110 mm injection molding machine Windsor 20000 kN The parts were supplied in a previous project which came not to run. be sure to visit! Technical data Manufacturer: Windsor Cylinder: for clamping force: 20000 kN or more Length: 4010 mm Diameter outside: approx. 280 mm Diameter internal: approx. 110 mm for appropriate mixing screw Number of the packaging: 62134-2; 80193; 063259 : Weight 2013 Packaging: see Transport box photo Screw mixing screw more than one zone Screw diameter: 110 mm Length: 4000 mm Nr of the packaging: 62136 Weight: 805 LBS 385 kg Weight of packaging: 5.25 x 162 \" Packaging: see Transport box photo Condition: new, i ...

Category: 308: other machines for plastic
approved
dealer
New in: 1995
Price: 15.900 €
Location: Leipziger Straße 32, 06108 Halle, DE
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Central Pellet drying dry air dryers Digicolor 26.5 kW with molecular sieve The system is functional still in operation. You are übernmommen in the framework of a factory takeover. Due to a Geschäfsumstelllung and or new acquisition at our customer be she no longer needed and sold. Still, the display is updated. Manufacturer: digicolor Bielefeld Type: DEHUVIDIFYNG DRYER Model: D 122 MT Baijahr: 1995 Hopper: 6 a ca. 120 l in 2 tables approx. 500 x 120 cm total height 220 cm Cabinet Trochenluft production with molecular sieve ca 100 x 100 x 200 cm Schalts - and control cabinet ca 100 x 80 x 200 cm 26.5 kW. Supply: 380 V ~ 50 Hz State. Plant is still in operation,  ...

Category: 1402: other machines for mechanical handling
approved
dealer
New in: 1999
Price: 900 €
Location: D - Sachsen-Anhalt
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Conveyor belt conveyors MTF GL IE 010 258x36x - 155 cm clocked running/Pause.oder controlled by machine in height and angle adjustable, fahrlbar on 1 stand with 4 castors, band is operational. Manufacturer: MTF technique Bergneustadt Type: GL-IE 010 No.? Year of construction: 1999 Band dimensions: 258 x 36 cm Mass conditioning: 266 x 45 cm Height: 105-155cm Angle: adjustable Mobile: Yes on 4 wheels Connection: 400V 50 Hz Control: DTSG2 (mode button is missing) Weight approx. 200 kg State. used see photos, ready to be used, as is, Next conveyor belts on sale. The conveyor is currently still at the location of the customers in Saxony Anhalt. The sale is carried  ...

Category: 2200: surplus goods
approved
dealer
New in: used
Price: 160 €
Location: Land-DE Germany, 06112 Halle
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: from a business resolution 50 x U profile steel 15 x 30 x 15 x 2.5 x ca. 3000 mm (originally 6 m halved with burning Schneider) The profiles were originally supplied with 6000 mm length. Were divided but the Ramen preparation for processing. Manufacturer/supplier: Kirchhoff and instructional GmbH Type: U steel profile Length: ca. 3000 mm halved with burning Schneider Weight: CA. 200 kg (50 pieces) New price: approx. EUR540 (50 pieces) approx. 11 packages 550 pieces available Lower amount of purchasable from EUR2 / m² Condition: See photos in stock, ready for use, -Eccentric press Hamilton 40SKR, pressing force: 40 t -Eccentric press Ambold to EDSP 55, pressing ...

Category: 2444: trailers/other
approved
dealer
New in: 1995
Price: 1.000 €
Location: D - Sachsen-Anhalt
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Swap storage container approx. 7.5 x 2.5 x 2.5 m 16 d Manufacturer: unknown No. 0550198 Year of construction: 1995 Max. Total weight: 16000 kg Weight: 2100 kg State. used, as is, see photo The swap is currently still at the location of the customers in Saxony Anhalt. The sale is carried out ex works EXW. The buyer is responsible for the dismantling, transportation of the specified site of the purchased machine. Furthermore we offer: Furthermore we offer: -3 x rack trolleys arm car lacquer drying trolleys with 4 wheels -Belt conveyor belt conveyor 1250 x 370 mm of drehzahlsteueung with hot air blower Hotwind 3400 W -Painting system Venjakob LWH 9 BJ. 1990 includi ...

Category: 308: other machines for plastic
approved
dealer
New in: 1979
Price: 690 €
Location: Leipziger Straße 32, 06108 Halle, DE
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Convection dryers ARBURG Thermolift 100 380 V 5.35 kW The air dryer is operational. You are übernmommen in the context of a wake-up acquisition. Due to a Geschäfsumstelllung and or new acquisition for our clients they needed more teacher spreading. Manufacturer: Arburg Type: Thermolit 100 Number: 202187 and others Year of construction: 1979 Total weight approx. 200 kg Connection: Voltage: 380 3 ~. Heating: 4,5 kW Blower: 0,85 kW State. well, ready for operation, see photos The dryer is still at the location of the customers in Saxony Anhalt. The sale is carried out ex works EXW. The buyer is responsible for the transportation of the specified site of the purcha ...

Category: 109: other metal working machines
approved
dealer
New in: used
Price: 120 €
Location: Leipziger Straße 32, 06108 Halle, DE
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer Workshop trolleys Garant steel with wheels and drawers without content Display is added. Tool trolleys Garant 918100 WxDxH: 65/73 x 45/55 x 93 cm Roller bearing drawers, 85% score, pull-out stop Height drawer dimensions inside from above Wxd 50 x 40 cm - 55/55/115/115/115/175 mm Roles are used (see photos), locking Weight: 58 kg A total of 8 cars of and other manufacturers available. Tool can be purchased separately. The cars are currently still at the site of the seller. Condition: used, good s.Fotos Furthermore we offer: -Ring spanner set Stahlwille/Garant 41.36 34, 32, 30, 27 mm -Bus key set PB Swiss made 210 / 19, 17, 14 and 12, and AMF 12 mm -Cylinder tr ...

Category: 1402: other machines for mechanical handling
approved
dealer
New in: used
Price: 900 €
Location: D - Sachsen-Anhalt
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Conveyor belt conveyors the band 300x50x115cm in height and angle adjustable, fahrlbar on 2 stands with 2 castors, support in the middle band is operational. Manufacturer: The band Type: 300 x 150 cm No. 9508-0379/02 Year of construction:? Band dimensions: 300 x 50 cm Mass system: 300 x 70 cm Height: 115 cm Angle: adjustable Mobile: Yes on 4 wheels Connection: 380/220V 50 Hz Gear motor: RF 0.25/4-7 0.25 kW 1410 U IP 44 Control cabinet with contactor and Moterschutz Moeller Weight approx. 200 kg State. used see photos, ready to be used, as is, Next conveyor belts on sale. He promotes Anhalt is currently still at the location of the customers in Saxony. The sal ...

Category: 1402: other machines for mechanical handling
approved
dealer
New in: 1999
Price: 990 €
Location: D - Sachsen-Anhalt
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Conveyor belt conveyors MTF GL-IE010 200 x 26 x 110 cm clocked or installed in height and angle adjustable, fahrlbar on 4 wheels Manufacturer: MTF technique Bergneustadt Type: GL-IE 0110 No. 6111 Year of construction: 1999 Band dimensions: 200 x 26 cm Dimensions unit: 212 x 50 cm Height: 110 cm Angle: adjustable Mobile: Yes on 4 wheels Connection: 400V 50 Hz Control: DTSG2 Weight approx. 200 kg State. used see photos, ready to be used, as is, Next conveyor belts on sale. He promotes Anhalt is currently still at the location of the customers in Saxony. The sale is carried out ex works EXW. The buyer is responsible for the transportation of the specified site o ...

Category: 1402: other machines for mechanical handling
approved
dealer
New in: used
Price: 1.250 €
Location: D - Sachsen-Anhalt
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Conveyor belt conveyors MTF 600x37x up to 100 cm clocked running/Pause.oder installed on machine in height and angle adjustable, fahrlbar 3 stand with 4 castors, band is operational. Manufacturer: MTF technique Bergneustadt Type: probably BLF Martin No. Year of built: unknown Band dimensions: 600 x 37 cm Mass conditioning: 610 x 54 cm Height: 100 cm Angle: adjustable Mobile: Yes on 12 rolls Connection: 400V 50 Hz Control: DTSG2 Weight approx. 200 kg State. used see photos, ready to be used, as is, Next conveyor belts on sale. He promotes Anhalt is currently still at the location of the customers in Saxony. The sale is carried out ex works EXW. The buyer is re ...

Category: 1402: other machines for mechanical handling
approved
dealer
New in: 2000
Price: 750 €
Location: D - Sachsen-Anhalt
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Conveyor belt conveyors Salama 1000/400 L mobile 230V 120W in height and angle adjustable, fahrlbar on 4 wheels with shelf Manufacturer: Salama Laichingen Type: 1000/400 L No. 25201-00 Year of construction: 2000 Band dimensions: 100 x 40 cm Mass system: 135 x 52 cm Height: 100 cm Angle: adjustable Mobile: Yes on 4 wheels Connection: 230V 50 Hz 120 W Geared motor: 0.12 kW Weight 150 kg State. used see photos, ready to be used, as is, Next conveyor belts on sale. The conveyor is currently still at the location of the customers in Saxony Anhalt. The sale is carried out ex works EXW. The buyer is responsible for the transportation of the specified site of the purc ...

Category: 409: other packaging machinery
approved
dealer
New in: 2001
Price: 3.800 €
Location: D - Sachsen-Anhalt
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Automatic Pallet Wrapper Rotoplat Jolly 275x270x172cm with loading ramp by ROBOPACK Manufacturer: ROBOPAC TYO: Rotoplat Jolly No. KN/043240 Year of construction: 2001 Weight: 2000 kg / m ² Turntable diameter: 1650 mm Turntable speed: 10 RPM Cars on- / abwaertsgeschwindigkeit: 3.2 m / min Max height load ca 2400 mm Max pallet dimension: 1000 x 1200 mm Dimensions of the system: 275x270x172cm Electrical connection: 230 V ~, 50 Hz, 1.4 kW with ramp Instruction manual copy Weight. approximately 445 kg Roll size: D max: 300 mm H: 500 mm Thickness: 17-35 ?m Inside diameter: 76 mm Max weight: 20 kg Condition: used, very good, ready for use, see photos The wind ...

Category: 301: injection moulding machines
approved
dealer
New in: 1998
Price: 32.000 €
Location: D - Sachsen-Anhalt
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Injection molding machine Demag ergotech 330-2300 compackt control unit NC4 with handling robot system Klocke The injection moulding machine is due to a Geschaefsumstelllung and or sold new for our customers. The injection moulding machine has worked up to the production setting. She was dismantled and is ready to reverse charging. Technical data Manufacturer: Sumitomo (SHI) Demag shut up Type: Ergotech 330-2300 compact Serial No.: 879 0268 Year of construction: 1998 Hours of operation: 30577 Clamping unit Clamping force: 3300 kN Locking force: 3630 kN Opening stroke: 675 mm Min/max height: 330/710(830 mit WA) mm maximum distance from the Werkzeugaufspannolatten:  ...

Category: 301: injection moulding machines
approved
dealer
New in: used
Price: 5.000 €
Location: D - Sachsen-Anhalt
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Cylinder & screw D 110 mm injection molding machine Windsor 20000 kN The parts were supplied in a previous project which came not to run. be sure to visit! Technical data Manufacturer: Windsor Cylinder: for clamping force: 20000 kN or more Length: 4010 mm Diameter outside: approx. 280 mm Diameter internal: approx. 110 mm for appropriate mixing screw Number of the packaging: 62134-2; 80193; 063259 : Weight 2013 Packaging: see Transport box photo Screw mixing screw more than one zone Screw diameter: 110 mm Length: 4000 mm Nr of the packaging: 62136 Weight: 805 LBS 385 kg Weight of packaging: 5.25 x 162 " Packaging: see Transport box photo Condition: new, in ...

Category: 1501: electric forklift trucks
approved
dealer
New in: 1993
Price: 1.250 €
Location: Land-DE Germany, 06112 Halle
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Reachtruck Junkheirich ETV A 16 6 E 80 500 charger Reperaturbeduerftig The truck was no longer used due to binding of the steering. As a result, the battery below 40 V has discharged. Charger invites illness no longer. Manufacturer: Junkheinrich Type: ETV A 16 6 E 80 500 DZ Number: 7.7530.38.05 Year of construction: 1993 Hours of operation: 4261 Mast: trip lex mast Lifting height: 5000 mm Capacity 1600 kg Load Centre 600 mm Drive: Electric 48v Battery: Flexplus 02 / / 07 3 EPZS420 48 V 420 Ah 740 kg too deep discharged Tools/Accessories: Sideshift Charger Junhheinrich C 400 G 48/65 Total weight approx. 3400 kg State. reperaturbeduerftig, for the repair or fo ...

Category: 1402: other machines for mechanical handling
approved
dealer
New in: 1995
Price: 1.390 €
Location: D - Sachsen-Anhalt
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Conveyor belt conveyors MTF BLF 500x37x100cm clocked running/Pause.oder installed on machine in height and angle adjustable, fahrlbar 3 stand with 4 castors, band is operational. Manufacturer: MTF technique Bergneustadt Type: BLF No. 9508-0379/02 Year of construction: 1995 Band dimensions: 500 x 37 cm Mass conditioning: 505 x 50 cm Height: 100 cm Angle: adjustable Mobile: Yes on 12 rolls Connection: 400V 50 Hz Control: DTSG2 Weight approx. 200 kg State. used see photos, ready to be used, as is, Next conveyor belts on sale. He promotes Anhalt is currently still at the location of the customers in Saxony. The sale is carried out ex works EXW. The buyer is respo ...

Category: 1402: other machines for mechanical handling
approved
dealer
New in: 1998
Price: 750 €
Location: D - Sachsen-Anhalt
Seller: MEDCO Congreß-und Handels GmbH Halle

We offer: Conveyor belt conveyors MTF NL IE 010 215 + 40x30x100cm abgewinlkelt clocked or installed in height and angle adjustable, fahrlbar on 4 wheels, band broken otherwise functional. Manufacturer: MTF technique Bergneustadt Type: NL-IE 0110 No. 5264 Year of construction: 1998 Band dimensions: 255 x 30 cm Mass system: 256 x 50 cm Height: 100 cm Angle: adjustable Mobile: Yes on 4 wheels Connection: 400V 50 Hz Control: DTSG2 Weight approx. 200 kg State. used see photos, ready to be used, as is, Next conveyor belts on sale. He promotes Anhalt is currently still at the location of the customers in Saxony. The sale is carried out ex works EXW. The buyer is responsible f ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)