demag crane used for sale

Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 52 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1 piece available -Dimensions: 220/123/H160 mm -Weight: 9 kg

Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 60 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 2x wheel block available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.7 kg/piece

Friction wheel, running wheel for bridge crane, bridge crane, overhead crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, Wheel block for crane chassis -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 48 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.5 kg/pc.

Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Ø 122 mm / rail width intermediate dimension 63 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1x wheel block available -Dimensions: 220/97/H160 mm -Weight: 8.5 kg

Electric motor, three-phase motor for gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor unfortunately without type designation -Power: kW -Speed: 1485 rpm -Shaft: Ø 24 x025 mm -Design: B14 -Dimensions: 370/180/H250 mm -Weight 19.8 kg

Demag 1000kg 13/3PF4, Electr. Trolley + C Rail Cable Cable Trolley Chain Hoist Total weight approx. 80 to 120 kg. Good used condition, full function. The cover caps on the hand control unit are missing. Ride back and forth at one speed each. Lifting and lowering at two speeds each. There are 3 C rails with associated connectors. Total length approx. 14m. Including flat cables and sufficient cable trolleys that run in the C rails. Except for the H-beam, the system is then complete.

Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details.

Key data: 10000 kN, 110 mm

DEMAG Ergotech 1000/1400-8000 -1000T Year : 2001 Screw diameter : 110mm Plasticizing capacity (g/s): 130 Injection capacity (cm³/s): 780 Injection pressure (bar): 1815 bar Injection volume (cm³): 4370 cm³ Mold thickness (min/max): 500 x 1200mm Distance between tiebars : 1400 x 1120mm Platen dimensions (h x w): 1950 x 1670mm Closing stroke: 1250mm Centering ring diameter: 250mm Ejection passage diameter: 160mm Ejection stroke: 350mm Optional: Sequential injection, 6 hydraulic cores, 2 pneumatic cores, ejection plate, and bimetallic sleeve screw. + Robot Star ref TX 1800 EMI

Clamping force: 3000kN, locking force: 3300kN, max. opening stroke: 670mm, min. mould installation height: 330mm, max. mould installation height: 710mm, max. distance between mould platens: 1380mm, mould platen dimensions: 1040x950mm, distance between tie bars: 720x650mm, max. mould weight: 4.7t, max. weight on moving mould platen: 2.4t, max. weight on fixed mould platen: 3.6t, ejector stroke: 200mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 50mm, L/D ratio: 20, injection pressure at 400°C: 2426bar, shot volume: 530cm³, shot weight (PS): 480g, max. metering stroke: 270mm, max. nozzle stroke: 470mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 110kN, installed barrel heating capacity: 14.8kW, material hopper capacity: 110l, oil tank capacity: 700l, electric screw drive: 38kW, electric clamping unit drive: 37kW, pump unit power: 22kW, total installed p ...

Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous  ...

This DEMAG Ergotech Compact 125-440 hydraulic injection moulding machine was manufactured in 1998. Contact us for more information.

Hydraulic injection moulding machine manufactured in 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar distance of 520 mm. The machine includes an injection unit with a screw diameter of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 160/520-600 machine we have for sale. Contact us for further details.

B&A REF: 9291 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 402 STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 160MM CONTROLS: NC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 SERVO DRIVE HEATING CAPACITY: 14.8KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC

Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, rope roller cover set, unused, original packaging -Type:280 2/1 -Item No.: 47926133 -Lid: Ø 350 mm -Quantity: 1 set available -Transport dimensions: 460/460/H120 mm -Weight: 5.8 kg

Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, rope roller cover set, unused, original packaging -Type: 2/1 2m -Item No.: 82930533 -Lid: Dimensions 450 x 450 mm -Quantity: 2 sets available -Price: per set -Transport dimensions: 460/460/H120 mm -Weight: 11.5 kg/set

Dieses originale Demag Proportional-Wegeventil Vorgesteuert stammt aus einer fachgerechten Demontage und befindet sich in gebrauchtem Zustand. Vor dem Verkauf wurde es sorgfältig überprüft, gereinigt und auf Funktion getestet. Das Teil ist technisch einwandfrei und voll funktionsfähig. Normale Gebrauchsspuren wie kleine Kratzer oder Verschmutzungen durch den vorherigen Einsatz können vorhanden sein, haben jedoch keinen Einfluss auf die Funktionsweise. Hersteller: Demag Teilenummer: MNR: R900972652 + R900246010 + R900891418 Type: 4WRKE 10 W100P-32/6EG24K31/A5D3M-693=DE + 4WRAP 6 W7-02-30/G24K4/M=DE Proportional-Wegeventil Vorgesteuert Anwendung: Ersatzteil für Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 38009623

Bridge crane, overhead crane, disc brake, crane brake, disc, drum and storm brakes, traveling crane brake, brake ring, conical brake disc -Manufacturer: Demag, Conical brake disc -Type: 089 762 84 KB160 -Dimensions: see photos / technical drawing -Quantity: 3x brake discs available -Price: per piece -Dimensions: Ø 290 x 90 mm -Weight: 6.3 kg

Geared motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: DEMAG, geared motor type 13/6 PKF 12/4 -Power: 0.05/0.17 kW -Speed: 450/1440 rpm -Shaft: Ø 14 mm -Protection rating: IP54 -Number: 2 geared motors available -Price: per piece -Dimensions: 270/210/H220 mm -Weight: 12.8 kg

Crane control unit, controller, safety control unit, safety switch, safety sensor, control unit, overload release power sensor, gear limit switch, contact evaluator, frequency evaluator -Manufacturer: DEMAG, crane control contact evaluator, original packaging -Type: Dematik MKA-2 -Item No.: 46953144 -Cardboard dimensions: 175/115/H60 mm -Weight: 0.4 kg

Crane control system, controller, safety control system, safety switch, safety sensor, safety relay, control unit, overload trip power sensor, gear limit switch, contact evaluator, frequency evaluator -Manufacturer: DEMAG, crane control contact evaluator, original packaging -Type: Dematik MKA-2 -Item No.: 46967044 -Cardboard dimensions: 175/115/H60 mm -Weight: 0.3 kg

Crane control, controller, safety control, safety switch, safety sensor, safety relay, control unit, overload trip power sensor, auxiliary switch block, auxiliary switch, contactor, solid-state contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker, motor contactor -Manufacturer: DEMAG, Schütz reversing Schütz, unused, original packaging -Type: DSW 3TF 8133 -Item No.: 87535044 -Cardboard dimensions: 165/105/H75 mm -Weight: 0.5 kg

Injection moulding machine Demag 1000 to BJ 2019

: DEMAG : . : 20 Euro . Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 2,5 t weight of the machine ca.: 80 kg : : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 2.200 mm height of hook: 2.600 mm weight of the machine ca.: 1,8 t weight max. in kg: 1000 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 10000 , 110

DEMAG SUMITOMO ERGOTECH 1000 T Injection Molding Machine - Year 2003 Type: 1000/1400 - 8000 NC4 Clamping Force: 1000 T Screw Diameter: 110 mm Theoretical Injection Volume: 4372 cm³ Injection weight. : 3930 gr Opening Stroke: 1250 mm Daylight : 2450 mm Distance Between Tie bar : 1400 x 1120 mm Platen Dimensions: 1950 x 1670 mm Mold tickness min/max : 500 /1200 mm Oil Capacity: 1300 L Dimensions: 11,90 x 3,20 x 2,90 m Weight: 63 tons

arm length: 6000 mm weight max. in kg: 250 kg swivelling range: . Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Crane number 1.26 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 5000 mm weight max. in kg: 250 kg swivelling range: . Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.27 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 5000 mm weight max. in kg: 500 kg swivelling range: . Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.35 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 2 t stroke: . mm clamping width: 5600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 43 ONLY BRIDGEIN LIFTING GEAR The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 3000 mm weight max. in kg: 500 kg swivelling range: . Grad total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 44 with wall bracket The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 8000 mm total column height: 4000 mm weight max. in kg: 3000 kg height: 4300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Demag hoist motorized The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details.

Specification Injection Moulding Machine Demag Ergotech 100/420-600 concept General data Clamping force: 1,000 kN (100 t) Year of Make: 2000 Control: Demag NC4 / ergocontrol Clamping unit Handlebar spacing (H x V): 420 x 420 mm Tool installation height min.: 250 mm Opening travel: 750 mm Ejector force: 41 kN Injection unit Screw diameter: 35 mm Injection unit: 600 Location: Aachen, Germany

Specification Injection moulding machine Demag IntElect 100/420-410 (all-electric) General data Clamping force: 100 t (1000 kN) Year of Make: 2007 Control: NC4 / MC4 Injection unit: 410 Screw diameter: 40 mm Clamping unit Clearance spar spacing: 420 x 420 mm Machine weight: approx. 5,000 kg Equipment: 2 x hydraulic core pull Location: Aachen, Germany

Specification Injection Moulding Machine Demag Extra 35-80 General data Clamping force: 35 t Year of Make: 2007 Control: NC4 / MC4 Clamping unit Size of the clamping plates: 390 x 390 mm Lights spar spacing: 280 x 280 mm Ejector force: 26 kN Ejector travel: 100 mm Injection unit Screw diameter: 22 mm Spec. Spray pressure: 2061 bar Spray volume: 42 cc Injection weight in hp: 37 g L/D Screw Ratio: 20 Machine weight: approx. 2,200 kg Equipment: hydraulic core pull, pneumatic valve Location: Aachen, Germany

Specification Injection Molding Machine Demag Systec 210/580-840 (Servo) General data Clamping force: 210 t Year of Make: 2019 Control: NC5 / MC5 Clamping unit Size of the clamping plates: 860 x 860 mm Lights spar spacing: 580 x 580 mm Opening travel: 790 mm Ejector travel: 180 mm Injection unit Screw diameter: 60 mm Injection volume: 636 cc Injection weight in hp: 579 g Spec. Spray pressure: 1352 bar L/D Screw Ratio: 20 Facilities Pump drive power: 26.0 kW Servo motor drive Bimetal, wear-resistant screw Flexible clamping unit with multiple ejector and core movements Ejector with position control Injection with control pump (p+v-controlled, closed loop) Pressure return system (RSP), 3-part Reinforced oil cooling system (supply up to 35 °C) Location: Aachen, Germany

clamping force: 600 kN injection volume: 106 cm³ screw diameter: 30 mm platen size: 590 x 600 mm Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in ...

Right-angle gearboxes Demag WUK60TD Type B14.2-50-2-69.3 with electric motor type ZBA 100 AL 2.2kW with drive and steel construction. New, from stock.

Specification Injection Moulding Machine Demag System 1300/1500-11500 General data Clamping force: 1300 t Year of Make: 2008 Control: NC4 Total connected load: 189 kW Weight: 86,700 kg Dimensions (L x W x H): 8.09 x 3.41 x 2.99 m + 6.25 x 2.58 x 2.99 m Clamping unit Size of the clamping plates: 2150 x 1880 mm Lights spar spacing: 1500 x 1250 mm Tool installation height: 700 - 1400 mm Opening travel: 1500 mm Max. panel spacing: 2900 mm Ejector force: 233 kN Ejector travel: 350 mm Injection Unit 11500 Screw diameter: 110 mm Spray volume: 5797 cc Injection weight in hp: 5200 g Spec. Spray pressure: 1971 bar L/D Screw Ratio: 24 Hydr. Drive power: 110 kW Cylinder heating capacity: 79.1 kW Facilities Hydraulic core pull: 4 Hydraulic cascades: 12 Hot runner control points (zones): 32 Robot Wittmann DR 853, built in 2014 (Z 3,500 / Y 2,500 / X 1,600 mm, C-axis ...

Specification Injection Moulding Machine Demag Ergotech 650/1000-3300 General data Clamping force: 650 t Year of Make: 2005 Control: NC4 Clamping unit Size of the clamping plates: 1450 x 1350 mm Clearance spar spacing: 1000 x 900 mm Tool installation height: 450 - 950 mm Opening travel: 930 mm Max. plate spacing: 1880 mm Ejector force: 96 kN Ejector travel: 300 mm Injection Unit 3300 Screw diameter: 80 mm Injection volume: 1779 ccm Injection weight in hp: 1600 g Spec. Spray pressure: 1855 bar L/D Screw Ratio: 20 Facilities Hydraulic core pull: 4 Hydraulic cascades: 8 Hot runner control points (zones): 16 Robot Wittmann W 843 Pro, built in 2021 (Z 3,000 / Y 2,000 / X 1,200 mm, C-axis servo 180°, B-axis servo 270°) included in the scope of delivery

Specification Injection Molding Machine Demag Systec Servo 420/820-2300 General data Clamping force: 420 t Year of Make: 2015 Control: NC5 Total connected load: 78 kW Weight: 21,000 kg Dimensions (L x W x H): 8.02 x 2.21 x 2.57 m Clamping unit Size of the clamping plates: 1200 x 1200 mm Clearance spar spacing: 820 x 820 mm Tool installation height: 380 - 825 mm Opening travel: 770 mm Max. plate spacing: 1595 mm Ejector force: 96 kN Ejector travel: 230 mm Injection Unit 2300 Screw diameter: 70 mm Spray volume: 1212 ccm Injection weight in hp: 1,100 g Spec. Spray pressure: 1877 bar L/D Screw Ratio: 20 Hydr. Drive power: 51 kW Cylinder heating capacity: 27 kW Facilities Hydraulic core pull: 4 (+ 2 additional connections on the hard drive) Hydraulic cascades: 4 Hot runner control points (zones): 40 Servo-hydraulic pump drive activeDrive (energy-saving) In ...

Clamping force: 6500kN, locking force: 7150kN, max. opening stroke: 930mm, mold height: 360-920mm, max. distance between mold mounting platens: 1850mm, mold mounting platens: 1350x1350mm, clear tie-bar spacing: 900x900mm, max. mold weight: 8.6t, max. weight on moving mold mounting platen: 5.7t, screw diameter: 110mm, L/D ratio: 17.2, injection pressure: 1270bar, shot volume: 3570cm³, shot weight (PS): 3180g, max. metering stroke: 375mm, max. nozzle stroke: 850mm, nozzle immersion depth (SVO): 70mm, nozzle contact force: 200kN, installed barrel heating capacity: 52kW, hopper capacity: 110l, the machine screw is defective. With documentation. An on-site inspection is possible.

Key data: 150 kN, 146 g/PS, 35 mm

1.0 PCS Injection Molding Machine with Robot Manufacturer: DEMAG Type: IntElect 150/520-410 Year of manufacture; 2008 Clamping force: 150 tons Handlebar spacing: 520 x 520 mm Screw diameter: 35 mm Displacement: 166 cm³ Moulded part weight: 146 g/hp Equipment; Removal robot, manufacturer; Wittmann, Type: W721, Year of manufacture: 2006 Travel distances: Y = 550 mm, Y = 1,200 mm, Z = 2,000 mm 2 x Core Pull Security fence

Key data: 250 kN

Demag Ergotech Compact 250-80 Year of Make: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g Spray pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Clamping force: 25 t Tiebar spacing: 280x280 mm Size of the clamping plates: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in � ...

Key data: 1000 kN

Sumitomo Demag Systec 100/420-310 with the Sepro SR SDR11 S3 TRANS robot / hybrid machine Year of Make: 2013 Injection unit: Screw diameter: 35 mm Injection weight: 149 g Spray pressure: 2024 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Sepro SR SDR11 S3 TRANS Year of Make: 2013 5-axis robot: 3 axes are driven by servo motors  ...

Key data: 800 kN

Demag Ergotech System 80/420-430 Year of Make: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Spray pressure: 2020 bar Dosing volume: 231 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/Width/Height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 2100 kN

Sumitomo Demag Systec 210/580-430 with the Sepro Success 22 robot / hybrid machine Year of Make: 2014 Injection unit: Screw diameter: 35 mm Injection weight: 153 g Spray pressure: 2640 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 210 t Handlebar spacing: 580x580 mm Size of the clamping plates: 860x860 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and quiet Operating hours: approx. 30,000 h in automatic mode Euromap 67 Robot interface Air Valve x 9 Hydraulic, needle-core pull, controlled by a proportional valve x 1 Hydraulic core pull x 4 Air Core Pull x 5 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection un ...

Key data: 800 kN

Sumitomo Demag Systec 80/420-310 with the Wittmann W818 robot Year of Make: 2015 Injection unit: Screw diameter: 30 mm Injection weight: 103 g Spray pressure: 2755 bar Dosing volume: 115 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 2 Control with hot runners x 12 Hardened injection unit - Bimetal Parallel movements Built-in printer Robot Wittmann W818 Year of Make: 2013 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-420, Y-1000, Z-1500 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Dimensions: Weight: 4000 kg Length/Width/Height: 4.10x ...

Parallel Gear Brake Motor Geared motor Manufacturer: DEMAG Type: KBA112 B12/4 / KBA112B12/4 Gear motor: Type: AUK60TL OEL: 5,0l Design: B14.2-65-0/178 More information can be found on the manufacturer's website, see pictures. Condition : New, may show traces of storage, comes from stock. Scope of delivery : see the pictures.