demag ac used for sale

Demag 3,2 ton x 20 meter

2 x Injection moulding machines Demag 1000 420 310 El Exis S Bj 2003

Injection molding machine

Group: 2M Kind of: hoist Capacity: 16 ton Drop: 8 meter

4 x Demag injection moulding machines Demag 80 to BJ 2005 Demag 420 to BJ 2003 Demag 420 to BJ 2005 Demag 420 to BJ 2008

Ref. no.: 18565 Manufacturer: DEMAG Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equip ...

Injection moulding machine Demag erg. 250/560 840 BJ 2001

Injection Molding Nose Demag ergotech 50/370-200 BJ 2000

Demag Jib crane 3 meter / 250 kg

Demag Jib crane 2 meter / 250 kg

2 KEER OP VOORRAAD Capacity: 250 kg

2 keer op voorraad nbsp; + geleiding Capacity: 125 kg

Demag hoist DCS PRO 10-1000 1 TON

Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) En ...

Compressor system / compressed air system composed of: Compressor Type STA-010 Maximum pressure 10 bar Output 0.9m³ per min incl. pressure tank 350l (14BAR) with filter

Clamping Force: 200 ton

Key data: 500 kN, 95 g/PS, 30 mm

Year of Make: 2005 Clamping force: 50 tons. shot volume: 106 cm³ shot weight: 95 gr./PS Screw diameter: 30 mm with take off robot Good condition

Plastic injection molding machine SUMITOMO DEMAG C75 – Year 2008 Sumitomo Demag C75 model, year 2008.

B&A REF: 9164 TON: 80 SCREW DIAMETER: 40MM SHOT WEIGHT: 208 STROKE VOLUME: 231CM3 INJECTION PRESSURE: 2025AR PLATEN SIZES: 590 X 580MM DBTB: 400 X 400MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 250MM EJECTOR STROKE: 150MM CONTROLS: NC4 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 11KW SCREW DRIVE: HYDRAULIC

Demag Ergotech EXTRA 50-200 BJ2005 for sale/scrapping, but the control is already missing here.Enclosed you will find the photos and technical data of the machine for sale with BJ 2005. The machine currently has a plasticizing unit with 25mm screw (BJ 2014) installed, we sell the original plasticizing unit with 30mm screw that is still working for the machine. The machine worked until it was taken out of service, we installed the control system on another machine.

E-chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DIwith Dematik BUS control via crane system controlFabr. No.61456646 Year of construction 2003Lifting capacity: 200 kgHook travel: 4.0 metersMain lifting speed: 14.0 / 19.2 m/min. Fine lifting speed: 0.20 m/min. Chain size 4.2 x 12.2 mm1 Load train = 200 kg- with control logic DKES2/5 500V- without crane operation- Dematik BUS control via crane system control- without roller chassisMains connection: 400 Volt, 50 HzNominal power: 750 WNenncurrent: 2.4

Suspension crane runway Crane system DEMAG type KBK 1Year of construction approx. 2000Monorail overhead track with monorail crane bridgeLight crane system system made of KBK modular system profilesLifting capacity: 125 kgSpan: 5 metresDistance longitudinal rails: 4.1 metresLongitudinal beam length complete: 12 metresGirder profile cross beam = KBK1Girder profile longitudinal rails = KBK1Consisting of:29 metres System profile KBK-1 (4x 6000 mm + 1x 5000 mm)1 piece carriage for the crane suspension2 pieces Double carriage for the longitudinal rails10 pieces Screw claws for the

E-chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4Fabr. No.61801899 Year of construction 1997Load capacity 100 kgHook travel 3 metersMain lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 3.6 x 10.6 mmCable length Operating bottle approx. 1.7 metersPower supply: 400 volts, 50 Hz1 load train = 100 kgWeight 16.5 kgGood condition; used

Some older plastic injection molding machines from Arburg, Demag and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, mol ...

E-chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4Fabr. No.61801900 Year of construction 1997Load capacity 100 kgHook travel 3 metersMain lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 3.6 x 10.6 mmCable length Operating bottle approx. 1.8 metersMains connection 400 volts, 50 Hz1 load string = 100 kgWeight 16.5 kgGood condition; used

Electric chain hoist crane DEMAG type PM 12LF ManuliftElectric crane with one-handed operationFabr. No. 5877813 year of construction 1990Load capacity 125 kgHook travel 3.5 metersLifting speed 12 m/min. Fine lifting speed 2 m/min. Motor power 0.32 / 0.05 kWNeching connection 400 Volts, 50 Hz1 Load train = 125 kgManulift Hand control directly on the crane hookGood condition; used

E-chain hoist, electric hoist, crane DEMAG type DKUN 10-500-K-V3 F6Fabr. No.: 61077868 Year of construction: 1999Load capacity 1000 kgHook travel 6.5 metersMain lifting speed 10 m/min. Fine lifting speed 1.6 m/min.2 load trains = 1000 kgPower supply 400 volts, 50 Hz.- Electric chassis DEMAG, type EU/RU 22 DK, 13/6 PF 12/4- Chassis for double T-beams, beam width 120 to 280 mm- 2 travel speeds 4.6 m/min and 14 m/min- Cable length of the control bottle 4.5 metersWeight 130 kggood condition; used

Electric hoist, crane, electric wire rope hoist, winch DEMAG type P 10Fabr. No. 941 477 Year of construction 1962Lifting capacity 2000 kg at 4 stringLifting height 5 metersLifting speed 6 m/min. Fine stroke speed 1.3 m/min. Reeving 4/1Motor power 0.6 / 2.6 kWNet connection 380 volts, 50 Hz- DEMAG hoist, type 19/11 K28P- DEMAG electric chassis, type 13 / 6 K8- 1 travel speed approx. 19 m/min- Chassis for double T-beams, beam width 120 to 180 mm- Load hook for 4 load trains- Control bottle for the hoist

Column-mounted slewing crane DEMAG type KBK 100Year of construction approx. 2008Lifting capacity 80 kgSwivel range 270 Radius 2500 mmOverall height 1980 mmHeight to lower edge boom 1580 mm- Crane column KBK 100- Boom profile DEMAG C-profile cutter KBK 1- Base plate L x W x H = 260 x 260 x 25 mm (4 holes 18 mm)- painted yellow- Info about the short column, this slewing crane was mounted on a machine stand. The last picture shows a slewing crane mounted hangingdead weight approx. 100 kggood condition; used

Wall slewing crane DEMAG type KBK 2Demag No. boom: KBK- 982 040 44Demag No. wall bracket : 85104044Year of construction 2000Lifting capacity: 500 kgRadius: 4000 mmSwivel range 270Wall mounting plate: 1170 x 440 mmHeight UK- Boom to OK- Wall bracket: 1000 mmFlange plate Wall bracket to middle Bolt: 270 mmTotal length Flange plate Wall bracket to boom tip: 4330 mm: - Boom profile C-profile rail DEMAG KBK 2- Carriage for C-profile rail DEMAG KBK 2- Original paint yellowWeight 170 kgVery good conditionPrice without

Crane Motor, Travel Drive Crane Bridge Drive with GearSliding Armature Motor, Thrust Bencher Motor, Three-Phase Electric Motor, Brake Motor, Crane Motor, Rope Hoist Drive, Crane Drive, Lifting Motor, Fine Stroke MotorManufacturer: DEMAGMotor Type: 24/10 KF8-2Motor No.: 982869Motor Design: B5Rated Voltage: 380 VAC Rated Frequency: 50 HzPower Level 1: 0.58 kW = 715 rpm. Power level 2: 2.3 kW = 2900 rpm.with gearbox DEMAG type KS 12Reduction gearboxFabr. No. 1909104Translation: i = 118with impeller for crane rail2 pieces available,

Column slewing crane DEMAG type KBK 1Year of construction: approx. 1980Lifting capacity 500 kgSlewing range 270Radius 2000 mmOverall height 2300 mmHeight to lower edge boom 1800 mm- Boom profile DEMAG C-profile rail KBK 1- Carriage for DEMAG C-profile rail KBK 1- Base plate crane column L x W x H = 370 x 370 x 20 mm (4 holes approx. 27 mm)Net weight 145 kg; used

E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4Fabr. No.: 63207040 Year of construction: 1993Load capacity 1000 kgHook travel 2.6 metersDistance suspension to load hook 450 mmHood lifting speed 4 m/min. Fine stroke speed 1 m/min. Cable length operating bottle approx. 1.7 metersMains connection 400 volts, 50 Hz.2 load lines = 1000 kg- emergency stopWeight 46 kggood condition; used

Injection moulding machine Sumitomo Demag IntElect 210/580-1000, built in 2009 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 210/580-1000 Operating hours: 27,297 25,717 Cycle counter 3,450,308

Dryer ComAir DEMAG CAD 430 W/292 W Properties: Total height 1900 mm Length 1200 mm Width 1400 mm Type CAD 430 W/292 W Machines Serial No. 00/4/14381/01 Engine power 4.7 kW Permissible pressure/max. pressure refrigerant side 16/20 bar Permissible pressure/max. pressure compressed air side 16 bar Ab. Ambient temperature min./ max. +2/ +50 °C Operating voltage 400 V Phase 3 Ph Frequency 50 Hz Nominal consumption 4,700 kW Protection class IP 54 Refrigerant R 134a Description: Largest refrigerant machine charge weight 7,500 kg Fuse/Fuse max. 20A Test Group (DruckbehV) I

This DEMAG Ergotech System 200-610 hydraulic injection moulding machine was manufactured in 1997. Its a robust option for efficient plastic processing tasks. Contact us for more information.

TECHNICAL DATA OF THE MACHINE General Clamping force: 50 t Year of manufacture: 2006 Control: NC4 Weight: 2,700 kg Dimensions (L × W × H): 3.8 × 1.1 × 2.1 m Injection unit – .../200 Screw diameter: 22 mm Injection volume: 41.8 cc Specific injection pressure: 2,800 bar Closing system – 50/... Clamping force: 50 t Tool plate dimensions: 520 × 520 mm Clearance between columns: 355 × 355 mm Tool height: 210 mm Opening Distance: 400mm Maximum Plate Distance: 610mm

Demag 60 ton x 24 100 mm Kind of: overhead travelling crane Capacity: 60 ton Span: 24 100 mm Drop: 23 meter Tackle speed: 1 & 4 m/min Rotationspeed: 12,8 & 50 m/min Displacementspeed: 8 & 92 m/min Numbre of riggers : double rigger

Ref. no.: 17507 Manufacturer: DEMAG Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg

Demag 3,2 ton x 17 500 mm Kind of: overhead travelling crane Capacity: 3,2 ton Span: 17 500 mm

Key data: 1000 , 3420 , 110

DEMAG SUMITOMO ERGOTECH 1000 T Injection Molding Machine - Year 2001 Machine with very low working hours Type: 1000-8000 NC4 Clamping Force: 1000 T / 10 000 KN Screw Diameter: 110 mm Theoretical Injection Volume: 3801 cm³ Injection weight. : 3420 gr Opening Stroke: 1250 mm Daylight : 2450 mm Distance Between Tie bar : 1400 x 1120 mm Platen Dimensions: 1950 x 1670 mm Mold tickness min/max : 500 /1200 mm Total Installed Power: 110 kW Oil Capacity: 2000 L Dimensions: 13.2 m x 3,20 m x 2,90 m Weight: 63 tons Machine sold with a STAR robot

Key data: 3500 kN, 70 mm

DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm

Key data: 2500 kN, 579 g/PS, 60 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET250-840 Concept Year of Make: 2004 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 636 cm³ Moulded part weight: 579 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W633-931 2 pcs core train

Key data: 600 kN, 94 g/PS, 30 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET60-200 Concept Year of Make: 2003 Clamping force: 60 tons Spar spacing 420 x 420 mm Screws DN: 30 mm Max. displacement: 106 cm³ Moulded part weight: 94 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W621-1381 2 pcs core train

Screw diameter: 70 mm Injectable volume Shot volume: 5598 cm3 Injection pressure : 1137 bar Column pass-through: 1060 x 1060 mm Moulded thickness / Mold tickness mini -max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 hydraulic cores - 4 cOREPULLING

Screw diameter: 45 mm Injectable volume / Shot volume: 358 cm3 Injection Pressure: 2426 bar Column passage / Bettween tie bar: 720 x 720 mm Thickness of the mould mini /Mold tickness -max: 320 - 725 mm Opening stroke: 730 mm Euromap 12 4 hydraulic cores - 4 corepulling

This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.