demag ac used for sale

Angular swivel unit, Accuracy 0.01°, SW100D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swing angle 180 [°] Torque 15 [Nm] Repeatability +/- 0.01 [°] swivel time 0.5 [s] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Operating temperature 5 ... +80 [°C] Cylinder volume per cycle 108 [cm³] Weight 6.3 [kg] 10 million maintenance free cycles, Positioning 2 positions, e ...

Angular swivel unit, Accuracy 0.01°, SF100-90D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swivel angle 90 [°] Torque 15 [Nm] Energy transmission pneumatic 4 [number] Swivel angle adjustable +/- 3 [°] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Repeatability +/- 0.01 [°] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Nominal operating pressure 6 [bar] Operating temperature min. 5 [°C] Operating temperature max. + ...

roll diameter: 50 mm Wheel width: 300 mm height adjustment: 480 - 530 mm weight: 52 kg dimensions of the machine ca.: 420 x 400 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 40 mm Wheel width: 275 mm height adjustment: 500 - 570 mm weight: 20 kg dimensions of the machine ca.: 360 x 300 x 600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

new accuhead, brand Kingswerk (similar to Kautex). Immediately available from stock

SECOND-HAND STAINLESS STEEL COMPRESSED AIR MULTIVAL VALVE BOILERS REF#: C9478 Multivalvula compressed air boilers made of stainless steel of different sizes.

accuhead machine, 300 kN clamping force. Extruder 80/24D. Accuhead 5 ltr. Die dia from 20 to 200 mm. mould dimensions: 800 x 700 x 2x250 mm (LxWxD) Spreading device, needle blow, waste punch, interval blowing, core pulls. Machine can be viewed under power until the end of January 2022

For sale comes: 1 used clamping/boring table Manufacturer: Skoda Type: E20OB22875 YEAR: 1989 Dimensions 2,000 x 2,000 mm Part weight: up to 25t electr. adjustable Mass: 10t

Technical data Nominal volume flow: 630 m3/h Max. inlet temperature: 70 °C Machine´s weight about: 94 kg Dimensions: Length: 625 mm Width: 555 mm Height: 975 mm

Technical data Table length: 800 mm Table width: 700 mm

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm MACH-id    3751 MAKE    Walter Eckold TYPE      KF 665 GIGANT YEAR     90 er DIMENSIONS Length    2400 mm Width      1000 mm Height      2200 mm Stoke´s 150 - 300 - 600 Adjustable ram 0 - 80 mm Forming capaity steel 6 mm  Forming capacity alu 8 mm

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 170 PD Kraftformer  

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 309 Kraftformer  

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 309 Picolo Kraftformer    

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 170 PD Pneumatic 2 Kraftformer  

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 460 Kraftformer  

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 330 Kraftformer

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 665 Gigant Kraftformer 

Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price

Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator, air damper actuator -Manufacturer: Siemens, servomotor -Type: SQN30.402A2730 -Dimension box: 155/115/85 mm -Weight: 0.7 kg

Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator -Manufacturer: Siemens, air damper actuator -Type: SQM33.511A9 -Dimension box: 190/180/H120 mm -Weight: 1.6 kg

Limit switches, buttons, safety switches, position switches -Activation radius: adjustable -Minimum operating radius: 95 mm -Number: 12x available -Price: per piece

Limit switches, buttons, safety switches, position switches -Activation radius: adjustable -Minimum operating radius: 35 mm -Number: 7 pieces -Price: complete

Limit switches, buttons, safety switches, position switches -Activation radius: adjustable -Minimum operating radius: 45 mm -Number: 30 pieces -Price: complete

Filters for AD Access - New - Prefilter (A1030153) for AD-Access Article-No. MA-201050

Circular Saw - Feed Unit Make EISELE Type SU 073Fabr. -No: 0739 built in 1988Max. Feed length: 920 mmBaking height: 65 mmOpening width of the vise: 200 mmDimensions: 1350 x 900 x 1150 mmWith- double repeating deviceusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Height adjustable roller conveyor make TRANSLYFT type TLH 2500Machine -No: 000290 Year 1990Roller conveyor width: 400 mmRoller conveyor length: 6000 mmSupport table size: 800 x 6000 mmLoad capacity: 2.5 tDimensions L x W x H: 6000 x 800 x 1000 mmWith- 4 built-in scissor lift tablesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Bar loader make Fabr. IEMCA type AS 325/32Machine -No: 87041309 Year 1987Rod sizes from: 3-25 mmBar length max .: 3210 mmMagazine capacity (eg 30 x 10 mm): 300 mmFeed rate: 200-600 mm / sec.Drive power: 1.0 kWWeight approx: 530 kgOutside dimensions approx: 4470 x 460 x 1500 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cabinet with tools for honing machine make NAGELCabinet size: 750 x 520 x 1460 mmNumber of drawers: 24Content consisting of- Honing tools- Recordingsused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

FaceplateDiameter: 900 mmPlate thickness: 135 mmSpout flange to: DIN 55027/8used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brand new three-jaw lathe chuckChuck diameter: 250 mmLining hole: 85 mmRecording: Camlock 8:: 136.3 / 139.2 mmWith- 6 locating bolts- reversible, screw-on top jawsSpecial pricePrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Two-jaw lathe make Fabr. BISON steel versionYear of construction 2008Chuck diameter: 250 mmBore: 75 mmWith- 1 set of base jaws- 1 set of soft top jaws- cylindrical flange receptacle- square keyunusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Multi spindle drilling head make SAWAS type SBS Gr. IIFabr. -No: 10957 Year 1995Number of taps: 6is: 4Spacing of the drill spindles: 65 mmPosition of the spindles: m lineGear ratio: 2External dimensions approx: 400 x 300 x 350 mmWith- Adapter flange for Alzmetall SB machinesusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

1 item = 44 drilling spindle carrier make BOLEY type W and type U1 item = 32 articulated spindles make BOLEY type W and type Uused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

PRAMET type S25T-PWLNR08KT306 lathe chiselPRAMET type S32U-SDUCR11-A830102 lathe chiselPRAMET type S40U-PCLNR lathe chiselusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Test mandrelTechnical specifications:Diameter: 49.999 mmLength: 330.324 mmRecording: ISA 40unusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Deep hole drill make SASSEXTechnical specifications:Drilling depth: 400 mmDrilling diameter: 60 mmTool holder: MK 5Overall length: 590 mmWith- Internal coolant supplyusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

1 lot = 46 broachesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine vice mechanical / hydraulic make RÖHM type RBFabr. -No: ID158413 / PTechnical specifications:Jaw width: 160 mmJaw height: 49.6 mmTotal length: 817 mmTotal height: 133 mmTotal width: 240 mmPunching force: 50 kNWeight approx: 60 kgWith- Clamping range 310 mm- mechanical drive with hand crank- hydraulic power transmission via hydraulic unitused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

TO WHOM IT MAY CONCERN ; WE VE USED WOODWARD PG - EG ACTUATORS AT OUR STOCK IT MAY USE ON WARTSILA 12V- LN GEN SETS PLS FIND SPEC ON BELOW PART NO 8576- 374 PART NO. 8576 -936 SERIAL NO. 12026031 ALL ACTUATORS DISMANTLED FROM RUNNING SYSTEM . EX STOCK . READY TO SHIPMENT . IF YOU VE ANY FURTHER QUEASTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

TO WHOM IT MAY CONCERN WE VE RECON GOVERNOR ACTUATOR WOODWARD PG EG 58 AT OUR STOCK IT IS SUITABLE FOR WARTSILA 6 / 8 / 9 L 46 ENGINES GOVERNOR SPEED IS 975 RPM AT 500 RPM. AT ENGINE SPEED PART NO. 8576 - 930 SERIAL NO 372611720 EX STOCK IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Hot press for manufacturing grinding wheels

Hot press for manufacturing grinding wheels

-Used-

Warehouse number: 3691 CNC ROTARY TABLE Manufacturer: Hydex, Type: AT-250 - 5 Axis Year of construction: 2022 Specifications: Table size 250 mm Center Height 320 Spindle hole 75H7 mm CNC control 2 ashes revolutions 50 per min Control Fanuc-Mitsubishi-Siemens-Heidenhain

HL 450 ton 4 column press