delta v used for sale

VermaTEC slope bucket 120 cm with MS03 Symblock attachment, as new, rigid, suitable for MS03 Symblock mount, Excavator class: 2-5t, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.

LxWxH: 50x55x60 cm

Volvo 4in1 folding shovel, suitable for Volvo L25, 180cm working width

Recording width 80 cm, recording width 26 cm, bolt 9 cm, height 190 cm, depth 215 cm

suitable for CAT

Pallet fork extension, 180cm extension length, Suitable for tines up to max 130x50mm, Price per pair excl. VAT.

Offer 25319 Specifications: - Drilling capacity in steel ST 60 35 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 160 mm - Drilling spindle speeds 65 - 3250 rpm - 3 feeds 0.1 / 0.2 / 0.3 mm/rev - Projection 320 mm - Max. distance table - drilling spindle 560 mm - Table with 2 T-slots 500 x 420 mm - Height adjustable via rack with hand crank - Table left + right tiltable - Drive 400 V / 1.5 kW - Space requirement approx. W 550 x H 2200 x D 900 mm - Weight approx. 550 kg - with: - Right – Counterclockwise - Coolant device -Lighting

VMC ECO S-1.800, Rotor length 1.800 mm, 132 kW Drive 380-400V 3Ph, 420 A 60Hz. IP55, complete with loading hopper, hydraulic ram 11 kW, hydraulic power station, control panel, good working conditions, Constructed in 11-2001, offered AS IS WHERE IS, installed power - used power in work: about 60-65% : 132 kW, availability: immediate, working width: 1.800 mm., options available: loading belt, extraction system, capacity: depending on materials and feeding rate, conditions: Very good, type: single shaft - electric

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

feed pressure: bar liter capacity: l power capacity: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, Vacuumatic Vicount Paper Counter Single-head paper counting machines for the security and commercial printing industries. Paper Substance Range: 25gsm to 240gsm, subject to paper quality. Count Speed From 500 To 2000 Sheets per minute, depending on paper quality and batching requirement. Batching: Tabbing interval 2 to 9999 sheets in steps of 1. If the batch size is small there may be a limit to count speed and stack height. 10 lengths selectable. Facility to store 10 different variable batch programs, each program having up to 25 lines. Maximum Stack Height 230mm. Mains Supply Options: 230V ac 1N - 50/60HZ 2.5A f.l.c (full load current) or 115V ac 1N 50/60 Nz 5A f.l.c Efficient paper counting and batching.

KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (May 2022) with only 1296 laser hours 2400 dpi Z-Speed Panel counter: 258861 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from right to left with Prinergy TIFF Shooter Dell PowerEdge 7330 Plate development machine built in 206 Year of Make: 2006

KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (08/2022) with only 2615 laser hours 2400 dpi Z-Speed Panel counter: 395443 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from left to right with Prinergy TIFF Shooter Year of Make: 2016 New TH 7 laser (08/2022) with only 2615 laser hours

Rötchenanlage: Kövy KM-S Year of Make: 2012 Head Machine Fortuna: Primus Pro V11.0 Year of Make: 2021 Kövy Dimensions: approx. 4900 × 1080 × 2530 mm Capacity: approx. 5,280 dough pieces /h Proofer capacity: 860 dough pieces Fortuna Hourly output: max.ca. 5,000 dough pieces /h Weight range: 40 -100 gr. Weight: approx. 1,100 kg Length of band top: 1,200 mm Length with strap: 1,705 mm Width: 1,000 mm Height: 1,520 mm Year of construction Fortuna: 2021 Year of construction Kövy: 2012

Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, 4x waterless offset units Technotrans cooling- temperature control Rotary die cutting 1x Flexo unit 1x Hot foil unit 5x UV dryer IST Rotary embossing Plate bender Plate punch and many more

A VICTOR lathe 500x1000. Distance between centers: 830mm, center height over bed: 250mm, max. turning diameter: 500mm, longitudinal travel: 800mm, spindle bore: 80mm. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1200mm, weight: approx. 1500kg. An inspection can be arranged by appointment.

Number of sanding units: 4 St. sanding width: 190 mm Sanding height max.: 180 mm Control: ja weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Dust suction hood: 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine --------------------------------------------- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturers Description: --------------------------------------------- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-dri ...

S. No.: G366J310535 Counter: Color Total 2’878’974 / B & W Total: 2’961’001 Format/Sizes: Maximum size: 330 x 660 mm Maximum standard sheet: 330 x 488 mm Minimum size: 98 x 146 mm Equipment / Additional information: With Fiery PRODUCTIVITY/PRINT SPEED • Average Monthly Print Volume: Up to 80,000 • Duty Cycle: 750,000 • 80 ppm (8.5 x 11"/A4), 52–350 gsm with Performance Package • 80 ppm (8.5 x 11"/A4), 52–220 gsm • 60 ppm (8.5 x 11"/A4), 221–350 gsm • 44 ppm (11 x 17"/A3), 52–350 gsm with Performance Package • 44 ppm (11 x 17"/A3), 52–220 gsm • 32 ppm (11 x 17"/A3), 221–350 gsm IMAGE QUALITY • 2400 x 2400 dpi VCSEL ROS for sharpness, detailed shadows and bright highlights • 1200 x 1200 x 10 RIP rendering without down sampling for Ultra HD performance

The machine is in good technical condition, testing is possible by prior arrangement.

Height=1.6 m, Overall length= 0.66 m, Overall width= 0.7 m, Producer: Vitella, Italy piece weight range: min 40 g max 2000 g Description Vitella divider automatic / s emi automatic m anual dividers divides the dough into 10 to 0 parts dimensions 660 x 700 x 1100/1600mm power 400 V/50 Hz/3 knife cleaning button 9 different programs

Heidelberg Stahlfolder VFZ 52 Baujahr 2008 Format max. B × L (cm) : 52 × 36 cm Format min. B × L (cm : 12 × 10 cm Bsbljxuif Negf Aq Hjlp Geschwindigkeit max. (m/min) : 160 Geschwindigkeit min. (m/min) : 25 Taktzahl max. (T/h) : 30.000 Einlaufhöhe (cm) : 51,5 – 91,5 Schwertposition : oben / unten Steuerung MCT Sofort Verfügbar

Clamp length: - mm Clamp width: - mm 0: - Nm Glass bead nailer 2 P Jumbo automatic E.C. - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation, With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. -------------------------------------- Price in this version on request! Plus packaging/shipping Additional prices: --------------------- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugg ...

Clamp length: , mm Clamp width: , mm 0: , Nm Painting aid for painting the sash and glazing bead frame at the same time RU-LH painting aid for glazing bead frames for processing staples L=50mm Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. At the 4 corners 1 bracket is placed on each of the glazing bead frames. The positioning is done diagonally and in such a way that the brackets protrude approx. 35 mm from the wood, When pressed into the sash frame, a clamping. The glazing bead frame is ready for painting Positioned at a distance of approx. 20 mm in front of the sash. After drying or before installing the sash the glazing bead frame is flush with the sash pressed and only removed again before glazing. The clamps can then be pulled out again by hand become. Stand frame with support table vertical 85°, adjustable in inclination. 2 pieces compensation frames f ...

Output: 25000 U/h // Bottle Size: 2,5

Output (Packs Per M?Inute): 45 U/min // Type : Barrel

Output: 12000 U/h // Bottle Size: 0,5 l, 1l

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 45 to PRESS TABLE   table surface (left-right): 700 mm   table surface (front-back): 440 mm   opening in bed (diameter): 40 mm SLIDE   table surface (left-right): 410 mm   table surface (front-back): 280 mm   stroke rate (max.): 110 /min SLIDE (MECHAN. PRESS)   slide adjustment: 65 mm   stroke min.: 0 mm   stroke max.: 90 mm   main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 380 mm   distance between columns (H-frame): 360 mm ATTACHMENTS (PRESSES)   2-hand engagement: yes   foot engagement: yes   European CE standards: yes

turning diameter: 830 mm swing diameter: 920 mm turning height: 750 mm control: Fanuc 0i-TF travel -x axis: 495 mm travel -z axis: 780 mm turning speed range - spindle: 1940 U/min drive capacity - spindle motor: 37 / 30 kW chucking diameter: 380 mm turret (x-stations): 12 pos rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 20 m/min feed: mm/min spindle diameter in front bearing: 160 mm c-axis: 360° (in 0,001°) workpiece weight: 870 kg total power requirement: 61,78 kVA weight of the machine ca.: 9,5 t dimensions of the machine ca.: 2,1 x 2,7 x 3,6 m - Control unit FANUC 0i-TF - Tool Turret 12-fold - Coolant system - Foot switch - Automatic safety switch Front door & full enclosure - Work area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Measuring machine Zeiss Vista BJ 2008

- VAC 100a Station - 2 x VAC 100m Station - ST-40 with SPF-CV infeed conveyor - SPF-20A Stitcher & Folder - FC-20A Trimmer - Standard delivery

Used PET bottle filling line. The line includes the following machines: 1. WeightPack Filler: WHT 12/36/28/8-141 NHESL, year 2009 This machine is designed for filling milk into PET bottles. The inlet system includes: - a feeding system with a screw, - a bottle disinfection system with peroxide (H2O2), - a bottle rinsing system with water, - a filling section with scales, - a cap application section with prior disinfection. Technical data: Nominal speed: 167 bottles/min. Machine weight: 9200 kg Electrical cabinet weight: 400 kg Operating temperature: 0 – 40 degrees C Relative humidity: 80% Ambient lighting: 200-250 lux Power supply voltage: 400 V Frequency: 50 Hz Power: 20 kW Nominal current: 62 A Compressed air pressure: 7 bar Air consumption: 1200 nl/min Maximum product pressure: 1 bar Maximum product feed rate: 200 l/min 2. Labeling machine – Sacmi: ...

Inv. Num. : 8788 Type: TKS070. ECZVO Producer: HV VMD GRYGOV Created: 2016 Parameters: Power consumption: 73 kW Maximum temperature: 450 C Weight: 2100 kg

A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible.

Semi-automatic vertical intermittent motion cartoner in Stainless Steel with output up to 70 boxes per minute (depending on product type and number of operators) Suitable for Pharmaceutical, Cosmetics, Nutraceutical, Contract Packing, Biopharma, FMCG, Medical Devices and other industries. Excellent condition for age - originates from a prominent Pharmaceutical manufacturing in Europe, where machine was serviced on regular basis. Equipment size: L: 3300mm x W: 1600mm x H: 1,900mm Weight total: approx. 1650kg Technical info: Carton box size range: - Width: 20mm to 115mm - Depth: 15mm to 75mm - Height: 50mm to 195mm - Width + Depth (max) up to 190mm CE marked Fitted with side cassette feeder for empty boxes Pre-folded leaflet inserter (leaflet dimensions: Length: 100 to 210 mm, Width: 18-45 mm) Fully guarded with interloc ...

Gathering Machine Horizon VAC 100 a/c + SPF-200A + FC-200A Year of construction 2009 Art.Nr. L1103 Collector Horizon VAC 100 a + c Sewing Machine SPF-200A Trimmer FC-200A Turret "a" 2.08 million, trimmer 2.04 million

Key data: 350 mm, 300 mm

Control: Okuma OSP-E100L Travel: X approx. 350 mm. Z: approx. 300 mm, maximum rotary diameter: 400 mm Item No.: 110174 Year of Make: 2004 Equipment: Conveyor Ewag infeed belt -20 positions

PLASTIC WASHING. LINE for GRAVIMETRICAL SEPARATION, including:, collection hopper, auger, STAINLES STEEL GRAVIMETRICAL SEPARATION TANK, size mm.5.800 x 1.600 ca, n.4 moving rolls, sinking screw, drained screw for collection of floating material, n.2 additional sinking screws, lifting screw for sunk material, n.2 TECNOFER CENTRIFUGAL DRYERS in sequence, 18,5 kw, 720 x 1.500 mm, connection screws, collection hopper, sucking unit, The line is offered as is, where is, Vertical mixer available separately, capacity: ca.500 kg/h depending on material and contamination

- Live tools 30 kw and 3000 Rpm with Sk50 - Full C-Axis 360.000  - Work load 10.000 Kg - Grinding spindel 30 kw and 3000 Rpm with Sk50 - Chip conveyor - Tool holders included max 400 mm height -  

x-travel: 1000 mm y-travel: 550 mm z-travel: 500 mm CNC-control: Fanuc Oi-MD table-size: 1.100 x 500 mm max. table load: 700 kg spindle taper ISO: BT-40 spindle turning speed range: 12.000 U/min feed stepless: 24.000 mm/min rapid traverse: 36/36/30 m/min drive capacity - spindle motor: 15/11 kW tool change unit: 24 coolant: IKZ 20 bar chip conveyor: voltage: 400 V total power requirement: 30 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,35 x 2,20 x 2,67 m - Serial No..:M281361B5N D - NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heavy-duty TIG welding machine. TIG welding Welding range 3~ 400 V:[A] 3 - 300 TIG Duty cycle 400 V Duty cycle DC 100% (40°c):[A] 250 Duty cycle DC 60% (40°c):[A] 300 Duty cycle DC at max. current (40°c):[%] 60 Electrode welding Welding range 400 V:[A] 20 - 250 Weldable electrodes:[Ø in mm] 1.5 - 6 Electrode duty cycle Duty cycle at max. current (40°c):[%] 80 Mains 400 V Mains voltage 3~ (50/60 Hz):[V] 400 Cooling type: Water-cooled Dimensions length x width x height Dimensions (LxWxH)[mm] 1,130 × 450 × 815 Weights Weight:[kg] 93.6 Weight, water cooling (filled):[kg] 14.7

Plant: Integrated raw material preparation for paper production Capacity (design): up to 1,550 t/day Lines: L1 280 t/day (HD pulper 26 m³), L2 550/700 t/day (LC pulper 70 m³), L3 160 t/day (mechanical), L4 160 t/day (broke), L5 160 t/day (chemical), FFD/UBC line 250 t/day UBC or 450 t/day mixed waste Brands & Core Units: VOITH: HD pulper 26 m³, VarioSplit, wire thickener, hot disperser, Integra screening (IntegraScreen/IntegraGuard) KADANT: Coarse screens (OS4/OS2, 1.8 mm), fine screens (0.15–0.25 mm), fractionation Cleaning/fractionation: Twister LC-Cleaner, OF8 (short fiber, 0.15 mm), MSS 10/10 & TL 100 (long fiber), Hidrodisk, EFK 1340, JYC 01/03 refiner Peripherals: WEIMA Shredder, PRESONA Baler Separation finenesses: coarse 1.8 mm / fine 0.15–0.25 mm Strengths: Multi-line layout, integrated reject/UBC processing, high flexibility for chemical, mec ...

x-travel: 1.060 mm y-travel: 610 mm z-travel: 610 mm control: Winmax 9 (Upgrade) table-size: 1.270 x 610 mm max. table load: 1.100 kg number of T-slots: 5 T-slot - width: 18 mm T-slot - distance: 100 mm turning speed range - milling: ~ 10.000 U/min power capacity - milling spindle: 18 / 11 kW tool taper: SK 40 Tool changer: 24 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 120 mm max. tool length: 300 mm max. tool weight: 7 kg feed: ~ 15,4 m/min rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 30 m/min rapid traverse Z-axis: 20 m/min weight of the machine ca.: 7,0 t dimensions of the machine ca.: 3,5 x 3,2 x 3 m Chip conveyor: Coolantsystem: high pressure coolant: through spindle coolant: Signal-Light: elektr. hand wheel: Machining Center - Vertical HURCO VMX 42 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Printing Width: 330 mm Maximum Unwind Diameter: 1000 mm Maximum Rewind Diameter: 1000 mm All Station UV (GEW) Chiller Rolls Delam-Relam Cold foil Lamination Corona Treatment Web camera - BST Doble rotary die cutting station, 1 Gap Master Sheet cutting possible

Drum chipper / chipper / wood shredder Refurbished (Workshop Overhauled) Vecoplan Drum chipper type VTH-55/14/2 Factory overhauled (refurbished) with new bearing (spherical roller bearing), tested rotor and new drive motor Knives and counterknives new Feed width/height: 550 x 140 mm Rotor diameter: 500 mm Feed rollers: 2 pieces Screen perforation: 55 x 55 mm Drive power: 45.0 kW Feed motors: 2 x 3.0 kW Weight: approx. 3,200 kg (approx. 4,000 kg incl. steel construction) Year of manufacture: 1981 / overhauled 2007 Machine colour: RAL 6011 Reseda green Cleavers and counter-knives, new incl. 6 pcs. cleavers, new incl. steel substructure H = 700 mm without electrical installation Drum chippers | Wood chippers | Hacker | Chopping Machine | Wood chipping machine | Shredders | Wood shredder # Vecoplan drum chipper type VTH-55/14/2 refurbished | reconditioned wi ...

x-travel: 2000 mm y-travel: 620 mm z-travel: 520 mm tool taper: 2500 x 600 mm control: 2000 kg tool magazin:: SK40 rapid traverse: HEIDENHAIN table-size: 30 - 8000 U/min feed: 45 m/min total power requirement: 45 m/min workpiece weight max.: 20 kW diameter of tools max.: 10500 kg tool length - max.: 5400 x 3300 x 3000 mm Equipment: - Heidenhain iTNC 530 control system - Tool magazine with 30 spaces - Chip conveyor - Screen filter system with IKZ - Operating instructions Optional (on request): - Radio probe (Heidenhain) - Tool measurement system (Heidenhain TT 160) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315 mm dimensions of saw-blade: 350 x 40 x 2,5 mm cutting diameter: 90 mm capacity 90 degrees: flat: 150 x 90 mm capacity 45 degrees: round: rechts & links 90 mm capacity 45 degrees: flat: rechts & links 105 x 90 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: flat: 75 x 70 mm cutting speed: 33 / 66 m/min total power requirement: 1,8 kW weight of the machine ca.: 340 kg dimensions of the machine ca.: 900 x 800 x 1700 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Saw blade - Machine base - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FOBA Vario RPD50 VS1109/048 - Windows XP English / German - 1.4GHz 512MB RAM - Fobagraf 441-01 - EMC / IMP camera - New IMP LED's - Radiator type P313 - 2013 – new filters - HF 40W - PK used, year of construction 2011, 1.3MB, 10.5 W under the lens - 420 lens, deflection unit Raylase SS 10 - Z - 170mm and X axis 300mm - Turntables in pendulum mode, - Start via footswitch, possible via light curtain - Internal / FOBA PLC - Bulkhead = max. component height 150mm - Completely cleaned / serviced 19% VAT is shown, EXW, Commissioning, instruction, training possible on request

General SKU393U1105 LocationBarneveld MakeKrauss Maffei TypeVZU 125/2,5 No.6000756 Year of construction2006 Main Features Materialmildsteel/halar Motor30 KW Inlet diameter80 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Capacity394 l Basket sizesø 1250 x 630 mm Wall thickness12 mm Max. loading weight500 kg With bottom dischargecheck Manual operatedcheck Liquid outletcheck Motor30 kW (400 V, 1500 rpm (Ex)) Max. basket speed950 rpm Max. temperature40°C Materialcarbon steel ST52 1.0570, Halar coating Information Mounted on foundation platecheck Total height1,7 m Weight5000 kg CEcheck Floorspace2,5 x 2 m ATEX compatiblecheck Extra SpecificationsHalar coated Metal contact parts Hastelloy-C Technical specs Extra information- halar coatedBasket centrifugesKrauss MaffeiCentrifuges > Basket centrifugesBrand > Krauss Ma ...

General SKU298T698 LocationBarneveld MakeVeenstra TypeFSL-550-V No.93551 Main Features MaterialStainless steel Motor4 KW Specified Features - Stirrer MaterialStainless steel Stirrercheck Paddle stirrercheck Sizes stirring headdia. 730x60 mm Motorcheck 4 kW 380-660 Volt (Flender ATB-Loher) (Ex) Speed mixing shaftmax. 140 rpm Information Mounted on framecheck With switchcheck Floorspace2 x 1 m Total height3.3 m Weight900 kg ATEX compatiblecheckStirrersVeenstraMixers > StirrersBrand > Veenstra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!