delta v used for sale

Inv. Num. : 8715 Type:- Producer: VOLTER Created: 2022 Parameters: Work table length: 2200 mm Work table width: 1610 mm Spindle drive power: 7.5 kW Maximum vertical spindle speed: 24000 1/min Lifting height: 160-180 mm Machine length: 3300 mm Machine width: 2100 mm Machine weight: 1200 kg Equipment: 4-zone vacuum table T-slot clamping system Spindle air cooling Semi-automatic tool clamping Laser starting point indication Wireless remote control CAN SW ISO 30 Terminals T12 Terminal Set Workpiece Probe

x-travel: 1660 mm y-travel: 760 mm z-travel: 660 mm control: Mazatrol M Plus table surface area: 2000 x 760 mm table load: 1,0 t rapid traverse: 24 m/min turning speed range: 7000 U/min power capacity - milling spindle: 11 kW tool taper: SK 40 | | no. of tools in the magazine: 2 x 24 Stück weight of the machine ca.: 8,1 t dimensions: 4,2 x 3,2 x 2,8 m Vertical Machining Center traveling coloumn - internal coolant - chipconveyor - ext, hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible.

Rheon Twin divider Type: VX 202 Year of Make: 2008 With 1 or 2 Huge operation Weight range: 75gr - 1200gr Hourly output max. 400kg / h with flour shaker Star edge lubrication Funnel for max. 50Kg dough Stainless steel cladding Dough width at discharge: 1 row: approx. 130 - 150 mm 2 rows: approx. 65 - 75 mm Weighing range: 1 row: approx. 150 - 1200 gr 2 rows: approx. 75 - 600 gr Max. discharge speed per minute: 1 row: 20 pcs/min 2 rows: 40 pcs/min Rheon dimensions: Height: 185cm Width: 386cm (with table) Depth: 100cm with conveyor belt Table for working Working height: 98cm (adjustable) with ingredient container

Works well.

From a current recycling we offer you a Holmer implement carrier + slurry technology + beet bunker Terra Variant 585 plus attachments. Year of manufacture: Holmer implement carrier + Zunhammer slurry technology 2019, beet basket 2024 First registration: / Condition: used Hours: approx. 8,459 Asking price: 295.000,00 Euro VHB Original price: 425.000,00 Euro Equipment / accessories / other information: Property will be converted to slurry at short notice Terra Variant 585 (BJ 2019), Slurry technology Zunhammer 21 m³ & Vogesang (BJ 2019), Overload bunker RB 35 (BJ 2024) Asset Manager: Klaudius Giolbas Phone: 0202 257273151 Mail: k.giolbasakf.de We will be happy to provide you with details upon request. Location: 24983 Handewitt The sale is without warranty Subject to prior sale

Key data: 100 mm, 1600 mm, 1120 mm

Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1120 rpm Axis W ... 900mm Axis Z ... 1250mm Spindle holder ... ISO 50. Clamping table surface ... 1250 x 1250mm Main engine power ... 11kW Max. workpiece weight ... 3000kg Total power requirement ... 15kVA L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg The machine is in good condition, possible to test under power.

VAN DEN BERGH FOIL-WIZARD (Hot foil stamping) INCL. ROLL UNWINDER HUNKELER S. No.: 02048020376 Equipment / Additional information: Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001)

A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible.

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-travel: 1250 mm w-axis: 800 mm b-axis: 360 ° table:: 1800 x 2200 spindle turning speed range: 3000 U/min feed range: 4 - 3000 mm/min table load: 12 t spindle taper ISO: 50 spindle motor: 37 kW rapid traverse: 10 m/min Control: Heidenhain iTNC 530 b-axis: 360 ° total power requirement: ca 70 kW weight: 36 t range L-W-H: 8 x 8 x 3,5 m equipped with: - CNC control Heidenhein iTNC 530 & handwheel - clamping table 1800 x 2200mm, 12t -- full B-axis with 360,000 positions - coolant - IKZ 20bar & extern cooling - BLUM TC 60 Taster - without chip conveyor ca 11500 Spindle Hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool clamping area: 20 - 70 mm weight: 5 - 8 kg Price is per piece for the smallest, if you are interested please contact us. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UNIQUE! Bread Stamp V2A for Bread Dough Pieces 750 - 1500 grams

Subject to prior sale - errors possible! Internal reference number: D-1143-7

Load capacity: 800 kg Wingspan: 5740 mm Portal height: 4700 mm Clear width: 5500 mm Wheelbase: 3000 mm Overall height: 5100 mm with electric train ELEKTROLIFT, year of construction 2022: Load capacity: 800 kg Lifting speed: 6 m/min Fine stroke: 1.5 m/min

Manufacturer: Voortman Model: V320-2000 Year of Manufacture: 2019 Operating Hours : approx. 5,800 h Including plasma source Kjellberg Smart Focus 300 and extraction unit Donaldson DFPR06 (last filter change January 2025) Technical Specifications Working Range: - Plate length (min/max): 850 – 6,100 mm - Plate width (min/max): 200 – 2,050 mm - Plate thickness (min/max): 6 – 75 mm - Max capacity: 7,500 kg - Material: Steel Drilling Unit - Type: VD40 - Automatic tool changer: 2 × VTC 5/40 (2 × 5 positions) - Feed and positioning: Servo-driven synchronous servomotors, frequency converter - Spindle speed: 0 – 2,500 rpm (servo motor) - Power: 30 kW - Cooling: Internal cooling air/oil - Tool holder: SK 40 - Drilling diameter: 5 – 40 mm - Thread cutting: M6 – M30 - Countersinking: Yes - Centering capability: Yes - Layout marking (optional): Yes - Hydraulic clamping: Yes Pl ...

-Fully hermethic motor compressor -Mech. Thermostat Cooling Capacity: 0.8kW Voltage: 230V/50Hz Pump power: 0.12kW Water tank: 15l

x-travel: 1000 mm y-travel: 600 mm z-travel: 600 mm control: Heidenhain TNC 426 spindle nose: 100-700 mm work table:: 1.080 x 580 mm workpiece weight max.: 550 kg T-slots: 7 Stk. T-slot - width: 14 mm tool piece magazine with: 36 Plätzen weight of tools max.: 8 kg tool length - max.: 340 mm total power requirement: kW weight of the machine ca.: 6,2 t dimensions of the machine ca.: 4.790 x 5.330 x 2.905 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used bread roll line with proofer EBERHARDT, type: Primo-Star / Vario-Star -In bakery condition- For Kaiserbrötchen, Kärtner Brötchen and Sternbrötchen - Primo-Star head machine - Proofer Vario-Star - Workflow from left to right - Weight range: 20 - 85g - Incl. spare engine - Double fermentation carriers - with flour Visits and test runs are possible by arrangement.

Filling and packaging lines for sausage products (or plant-based alternatives) in cans, consisting of:, 2 filling lines, Line 1: set up for 125 g - aluminum cans with a can diameter of 73 mm, Line output: approx. 150 cans / min., Line 2: set up for 200g/300g and 400g cans with a can diameter of 99mm., Output: approx. 70 cans / min., Sterilization:, The products were sterilized in full water autoclaves with rotation (5 available) that were overhauled by Trinitas Trading in 2017., 3 labeling and packaging lines:, The labeling and packaging line for 125 g cans consists of a Langguth hot melt labeling machine from 2016 and a virtually unused Wächter packaging system (leased system) from 2022., We will be happy to send you the complete list of all machines belonging to the lines upon request., The machines can also be purchased individually.

CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production., Accessories:, Total enclosure, Software path management, Filter system with chiller for dielectric fluid, Automatic fire extinguishing system DIN 14497, Standard programs for measuring, eroding etc., Program for chamfering of workpiece cutting edges,, Automatic Diagnosis program for machine operational status with text output on screen, Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine,, 6 sided erosion wheel changer,, Workhead SK 50 with adapter to 12 HSK 63 A,, Turntable workpiece magazine for 12 workpieces SK 50,, Turntable workpiece magazine for 4 workpieces SK 50,, 6 flush sets, QXD250 CAD/CAM for external PC workstation ...

turning diameter: 500 mm turning length: 1075 mm control: Siemens One greates pass round over bed: 660 mm Main spindle:: turning speed range - main spindle: 3500 min/-1 power capacity - main spindel: 15 /22 kW spindle diameter: 75 mm milling spindle: milling spindle motor: 15/18,5/22 kW milling head speed: 12000 U/min b-axis: -30 / +210 ° axis stroke:: x-axis: 635 mm y-axis: 260 (+/-130) mm z-axis: 1170 mm feeds:: rapid traverse ( X / Y / Z ): 36 m/min 2nd Spindle:: Subspindle Power: 15/22 kW spindle turning speed range: 4000 U/min spindle passage: 66 mm turret:: number of toolpositions: 40 pos. tool taper: HSK T 63 dimensions of the machine ca.: 7,95 x 3,3 x 3,3 m total power requirement: - kW weight of the machine ca.: 22 t dimensions of the machine ca.: 6 x 3 x 2,9 m CNC turning and milling centre - Siemens One control (5 axis Simultaneous) - C-axis, Chuck(s): 10 - Main and cou ...

Manufacturer: Mikron Model: VCP 1000 (ITNC 530 Control) Year of Manufacture: 2004 Weight: 10,500 kg Power Supply: 400 V / 50 Hz / 3 Phases Current: 100 A Power Consumption: 40 kW Control Circuit Voltage: 24 VDC Sound Level: 68 dB(A) Find more here - / Contact us at -

Manufacturer: Mikron Model: VCP 1350 Year of Manufacture: 1999 Weight: 10,100 kg Power Supply: 3 Phase, 400 V, 50 Hz Current: 125 A Power Consumption: 46 kW Control Circuit Voltage: 24 VDC Sound Level: 75 dB(A) Certification: CE Find more here - / Contact us at -

sheet width: 1360 mm plate thickness: 06,0 mm distance between columns: mm table width: 455 mm work height max.: 880 mm cutting angle: 1°30 ° rear stop: 750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 600 mm z-travel: 250 mm table-size: 697 x 758 mm weight of the machine ca.: 1.5 t dimensions of the machine ca.: 2 x 1.5 x 1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is packed in full cartons or trays. Capacity up to 120 packs per minute. Siemens S-7. Machine Dimensions: Length: m Maximum width: m Height: m. Weight: tons Double Row Machine The machine has been thoroughly overhauled in 2025, in very good condition. Ready to go. We provide a 24-month warranty.

Stock number: 4001 PROCESSING Manufacturer: MAZAK, Type: VCN 410A-II Year of Make: 2009 Specifications: Table size 900 x 410 mm Longitudinal movement (X) 560 mm Transverse movement (Y) 410 mm Vertical movement (Z) 510 mm CAT 40 spindle cone Infinitely variable spindle speeds 12000 rpm Spindle motor 11/7.5 Kw Tool changer 30 places Control Mazak Matrix Fabr. Controlled in axes 3 Operating hours spindle 7746 hours Accessories: Cooling by spindle 15 bar Chip conveyance. Tool Measuring Length: 2600 mm, Height: 2800 mm, Width: 2000 mm, Weight: 5010 KG

used wagon furnace system with 2 x wagon furnace Heuft Vulkan Thermo-Roll VTR 10.19,0.09 and 1 x boiler Heuft HK 200, Fabr.-Nr. 13 C 582, with 3 trolleys 60 x 100 cm per oven, 9 shelves per trolley/oven, shelves each 18.5 cm high, with br. Weishaupt oil burner, external dimensions per oven: 170 cm wide, 325 cm deep, 260 cm high, outer dimensions kettle: 105 cm wide, 170 cm deep, 200 cm high, in baker's condition, ran perfectly until the end

Stock number: 4000 PROCESSING Manufacturer: MAZAK, Type: VCN 510 C Year of Make: 2006 Specifications: Table size 1350 x 550 mm Large table load 1000 kg Longitudinal movement (X) 1050 mm Transverse movement (Y) 510 mm Vertical movement (Z) 510 mm Spindle cone MAS 40 Infinitely variable spindle speeds 12000 rpm Tool changer 30 places Control Fusion 640 Fabr. Operating hours spindle 7419 hours Accessories: Cooling by spindle 15 bar Chip conveyance. Length: 2800 mm, Height: 2800 mm, Width: 2900 mm, Weight: 7100 kg

A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible.

diameter: / mm Cutting (quantity): / 0 weight: / kg Type: MFE 5/BW 16 05/0.6 l/min P-max: 20 bar Container capacity: 15 l 2 units available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thermo Scientific Incubator, Internal dimensions (mm): 505x440 H 665, Number of shelves: 3, Maximum temperature (°C): 55°C , Sterilization temperature cycle (°C): 180°C , CO2 control: ± 0.1% , O2 control: ± 0.1% , Humidity: RH: >_93% @ 37°C

Thermo Scientific incubator. Sold with 1 filter and a water reservoir cover., Dimensions (mm): 875x640 H 1145, Internal dimensions (mm): 505x440 h 665, Number of shelves: 2, Maximum temperature (°C): 55°C, Sterilization temperature cycle (°C): 180 , CO2 control : ± 0.1%, O2 control: ± 0.1%, Humidity: RH: >_93% @ 37°C

BÜNDER SCHMITT corker, Elec: 400 V, Dimensions (mm): 950x1120 H 1880

Vacuum pump, Max flow: 2.0 m3/h, Limit void: 2 mbar , Engine power: 0.16kW , Link to manufacturer: shop.vacuubrand/en/vario-chemistry-pumping-group-pc-3001-variopro-vp-5 8.html?_gl=1z327z1_upMQ..&gclid=Cj0KCQjwv7O0BhDwARIsAC0sjWNgJFYzk804i8 3FsvmvE6pdlCfxBV9T2H enFLlzgew3vJwq7OJokRkaAmfdEALw_wcB#product -info-unit-table, : 0.16kW

Tie bar expansion nut, adjustment nuts and split nuts for die casting machines from IDRA, Frech/Müller Weingarten, OP Die Casting Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Condition New The mother is new and fully functional. The goods can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar expansion nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible.

Voxeljet VX500 – Used 3D printing system for industrial sand and plastics processing, On behalf of our customers we are selling a fully functional Voxeljet VX500, an industrial 3D printer for powder-based binder jetting processes. The machine was Commissioned in 2016 and until August 2019 in process B used (binder type “B” from Voxeljet)., Since September 2019 was on the solvent-based PPC binder system converted, including a Changing the print head,, The VX500 is ideal for precise applications in prototype construction, small-scale production or research – especially with plastics or investment casting materials., ---------------------------------------------------------------, Scope of delivery:, - Voxeljet VX500 (3D printer), - Compact, powerful binder jet 3D printer, - Ideal for resin and sand processing on an industrial scale, - Powder preparation station VRS500,  ...

welding current: 10 - 200 A connected load frequency: 230 V weight: 6,5 kg Dimensions (LxWxH): 380 x 120 x 250 mm TIG Welder AC/DC, Pulse Demo unit in aluminum box Includes all accessories See images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) En ...

video control station The VCPevo / VCP Evolution (often written VCPevolution”) is a fully automatic register punching & bending system for printing plates (offset printing) built by NELA. VCP” stands for: Video‐recognition of register marks (V) + Controlling via CCD image processing (C) + Positioning by stepping motor control (P) — as one brochure puts it. The machine is used in the pre‐press / printing-plate automation sector: it aligns exposed printing plates, punches the register holes, bends the plates (to the correct angle) in one cycle. The VCPevolution line is described as the new generation” of the VCP series, aimed at high precision, high throughput, integration into automation / plate sorting lines. According to NELA’s product page for VCP, the machine is available in different models and can easily be integrated into any automation solution.” nela.de Fin ...

plate width: 125 mm plate thickness: 2 mm straightening feed: 5-30 m/min total power requirement: 1,5 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: m - Belt infeed height: 1,250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

REF-2704 LLEAL MAX-MIX MM-500 VACUUM MIXER FOR LIQUID AND VISCOUS PRODUCTS Manufacturer: LLEAL Model: MAX-MIX MM-500 Year: 2000 Machine no.: 14890 Series: 3712 Electrical specifications: 49.8 kW/380 V/104 A/3+N+E/50 Hz Dimensions (in mm): See the drawing in the last picture. MAX-MIX MM-500 mixing, dispersion, emulsion and homogenisation system. The MAX-MIX processor is a multifunctional piece of equipment ideal for manufacturing liquid and viscous products that require dispersion, homogenisation and emulsion stages (in both solid/liquid and liquid/liquid processes) and that also require a complete deaeration, which is possible thanks to the internal vacuum circuit. The process can also include the heating or cooling of the products during their manufacture, the addition of solids and liquids in vacuum conditions, and the recirculation and discharge by positive displac ...

Printing line with Oce Variostream model 7170, serial number 37248 and Lasermax rewinder model RW 100. All in production ready condition and still under power.

Extension arm suitable for 6-10t mini excavator / extension arm to fit 6-10t excavator, length 2 m, weight 230 kg, rear mount 2x fixed bolted, front mount with various quick couplers possible (on request)

Handle suitable for Volvo ECR 88, part number: , suitable for s/n: 10001 - 10617

Volvo BM 1254 Oltimer wheel loader with 149 kW, own weight: 13800kg, width between the tires: 2580 mm, height (to the upper part of the cabin): 3030 mm, with shovel, ready to use,

with complete hold-down device, especially for garbage disposal, with screw-on reversible knife

80 cm working width, suitable for Volvo S2