delta v used for sale

Key data: 2000 KW, 2500 kVA, 6300 V

MWM TCG 2020 V20 YEAR 2006 Hours: 16.000 (total hours) 2000kw 2500kva 6300volt AVK Generator all documents are available! scope: Genset on frame with alternator Gasline Control panel Cpu panel Pomps Transformer genset in stock in our warehouse: address: Kranenpool 10 6443VA Brunssum

Technical data of the pallet rack crossbar: Shelving system: Voest Alpine Type: Megastar GS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: hot-dip galvanised CS profile: 100 x 50 x 10 mm Agraffe: 4 HK (hooks) Clear width: approx. 2,700 mm 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Max. rod Ø 20 mm Max. machining length 165 mm Spindle speed 8,000 1/min Max. rod Ø sub-spindle 20 mm Max. speed sub-spindle 8,000 1/min Number of tools that can be used: 21 Turning Tools Multiple Chisel Holders: 6 Driven tools for transverse machining: 3 Front side drilling tool: 4 Rear drilling tool: 8 Speed driven tools: 8,000 1/min

4 x Demag injection moulding machines Demag 80 to BJ 2005 Demag 420 to BJ 2003 Demag 420 to BJ 2005 Demag 420 to BJ 2008

Our KVK 3 Slim Line is a semi-automatic stretch wrapper with turntable. It is equipped with a pre-stretch system for 250% elongation. Thanks to the pre-stretching system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only a minimal application tension, so that even light packaged goods are not pulled from the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 3 Slim Line has a 1500 mm turntable and can wrap pallets up to 2250 mm high as standard. With adjustable speeds of the turntable and foil slide, as well as a power stretch unit that can be controlled via potentiometer, you can adapt the automated winding perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter ...

Ref. no.: 18255 Hersteller: ENGEL Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009

Weibert DB 1050 Pro Vario Lathe Turning diameter 794 mm Tip height 397 mm Center width 1016 mm Speeds: 20- 3850 min-1 Konuse MK 2 Spindle Head Thread M33 2.2 KW 50 HZ 230 V Right - Counterclockwise Length 1700mm Height 1300 Weight 250kg Scope of delivery: Tool support 300 mm Increase in tool support Face Plate 80 mm Four-pronged drivers Grain Punches long ejection rod Short ejection rod 2 x tension wrenches 46mm / 38mm Tension wrench 8mm / 10mm Tension wrench 17mm / 19mm Allen key (2.5mm, 3mm, 4mm, 5mm. 8mm, 10mm)

Various accessories for saws in professional woodworking are offered - consisting of replacement profile cutter heads (partly from Leitz-Variform, as good as new and partly in original packaging). If requested, individual sales may also be possible. The accessories are currently located in Magdeburg and are being sold - due to a restructuring. Only the accessories offered are expressly sold, any items shown in the photos are expressly not part of the scope of the offer. The offer prices are to be understood as gross prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, to which we expressly refer.

Inv. Num. : 8680 Type: VSC 250 DS Producer: Emag Created: 2007 Parameters: Control system: Siemens 840 SL Table diameter: 260 mm Feed length X-axis: 680 mm Feed length Z-axis: 200 mm Maximum turning length: 100 mm Max. turning diameter: 250 mm Maximum workpiece weight: 40 kg Motor power: 35 kW Length: 3800 mm Width: 2100 mm Height: 2400 mm Weight: 7500 kg Equipment: Chip conveyor

bore capacity in steel (diameter): 40 mm throat: 380 mm bore stroke: 160 mm : 4 speeds: 60 - 1250 U/min table-size: - mm total power requirement: 3,3 kW weight: 900 kg dimensions: - mm Features: -Gear drilling machine with a robust design -Column-mounted drilling table -Right/left rotation -Feed -Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VSA 2032 Feed 3 feed rollers 4 speeds Speeds: 4/8/9/18 m/min Roll diameter 80mm Motor 180W 400V 50Hz G&STÜ-5119032

- Renishaw measuring probe MP-12 - IKZ 15 Bar - Interface set - Performabnce software package - Monitoring B prepared not included

- X Stroke 1835 mm - Z Stroke 1000 mm - Table load 20 Ton - Ram size 230 x 230 mm   - Stroke crossrail 800 mm  - Stroke crossrail in 5 steps each 200 mm - Live tools 2000 Rpm - Power live tools 15 kW - ATC 18 station max L = 450 mm - Taper BT50 BIG PLUS - Full C-Axis 360.000   - Under power in AEROSPACE precision plant - 2020 Table bearing replaced - 2020 Ram bearing replaced - 2025 new chip conveyor

Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction - Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal - Build in height 2950 mm - Maximum die height 1500 mm - Movable Table & Piston in X-Ways - Large package Die tooling radius 10/20/30/50/60/80/100  - Pressing force 210 kg/cm2 - Maximum stroke 800 mm - Machine 2350 mm placed in ground  

- Force lower rol upper roll 1178 Ton - Cone bending attachment - Hardned and grounded rolls - Width between upper and lower roll 200 mm - Power 180 kW

- Lifting height 6000 mm - Work load maximum 1000 Kg - Rotation speed 2,5 M/Min - Power 0,4 kW - incl. 2 sling ropes

- Maximum swing 500 mm - 3 x adjustable bronze rollers - 2 Matching steady rest 

Vacuum pump BECKER compressor VTLF 500, 500 m³/hr, machine number 1515718, year of construction 1998, in good condition, immediately available, 4 units in stock available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment

A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range ...

Max. cutting length: 5,000 mm Max. saw blade diameter: 400 mm Digital length display Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation

Key data: 300 mm

Saw blade diameter max. 300 mm Speed setting 2 levels: 17 and 33 rpm. Weight 450 kg

Feature VMS II Cut at 90° (flat) approx. 140 × 70 mm Cut at 90° (round) approx. 80 mm Cut at 45° approx. 100 × 70 mm (flat), round: 80 mm Speed 40/80 rpm Coolant available Power approx. 1.4 kW (up to 2 kW) Weight approx. 400 kg (depending on version: 270–500 kg) Dimensions (L×W×H) approx. 1.0 × 0.75 × 1.6 m

VOBAU PROFILE DOWNSTREAM EQUIPMENT, Max Profile Section 250 x 100 mm,, Maximal Traction Force 20 kN, Maximal Speed 8.5 m/min, CALIBRATOR - 4000, Fixing Surface Calibration Tools 4.000 x 400 mm, 3 Vacuum Pumps 5 kW Each, Adjustments :, Longitudinal Lenght , Vertical Motorized,, Lateral Manual ., HAUL OFF - 175, Oscillating Pneumatic Top , Manual Down,, Carterpillers Adjustment, Carterpiller Length 175 x 2300 mm, 2 Gears Motors 2.2 kW , Each, Inverter Control , Maximal speed 8.5 m/min, SAW - 450, Ascending Saw , Suction Shaves, Translation Trolley Cut - 600 mm, Disc Ø 450 mm, Motor 2.5 kW, Tilting Table ., availability: immediate

OKUMA Euro Center V50, built in 2004 Control: OSP-10M Travel: X-1020 Y-510 Z-525 Table load 680kg Clamping area 1200x510 Tool changer 20-fold

gebr. V. Processing Center, Fabr. Homa, Type Ecocenter V350 x-travel 450 mm y-travel 350 mm z-travel 350 mm Table size 650 x 350 mm Speed 6000 rpm Control Fanuc 0M

Height=1.36 m, Overall length= 2.56 m, Overall width= 0.76 m, Net weight= 137 kg,

Various geared motors, one with inverter: NORD electric motor 7.5 kW with parallel shaft gearbox ratio 41.94 (No.1) Geared motor MUCHNA type 63A 1.5kW n1/n2 140/18 rpm (No.2) Electric motor 18.5 kW 1460rpm VEM motors (No.3) NORD Geared Motor 11kW with Inverter and External Fan (No4) NORD Gear Motor 5.5kW n2/n1 1450/142 (No5) For prices, nameplates and further details see: kleinanzeigen.de/s-bestandsliste.html?userId=37037422

Stock number: 3774 PROFILE BENDING MACHINE Manufacturer: KUMLA - ROUNDO, Type: Z-30 Machines NO.: 5017, Year of manufacture: 1990 Specifications: Shaft dia. 90 mm Round steel 60 mm Flat steel 200 x 30 Special roll mm Frame steel upright 100 x 20 mm Angle steel 90 x 90 x 9 mm Speed 7.5 m/min Upper roller 280 mm Ø Load by steel 40 Kg/mm2 16 cm3 Square steel 55 x 55 mm Total power 4 kW Hydraulic. 3-reels. Horizontal/Vertical Accessories: Digital Various matrices. Length: 1250 mm, Height: 1550 mm, Width: 1100 mm, Weight: 2100 kg

Hurco VMX 24, YOC 2003 Travel X/Y/Z: 610mm/508mm/610mm Rapid traverse X/Y/Z: 35m/35m/30m Feed: 7600mm/min Table dimensions X/Y: 760mm/510mm Max. table load: 700kg Tool holder: SK40 Tool Positions: 24 Spindle speed: 10000rpm Power: 7.5kW Dimensions approx. 2200mm/2400mm/2500mm Weight: approx. 5000kg Control: Ultimax 4 (Documentation available)

Manufacturer: UnoTech Model: 200 V5H4 RB Year of Manufacture: 2017 Loose hydraulic unit with 4x 75kW pumps Find more here - / Contact us at -

Key data: 3000 , 702 , 60

Presse à injecter ENGEL 300 T Type : VICTORY 1800 / 300 POWER Année de fabrication : 2008 En bon état de fonctionnement Force de fermeture : 3000 KN / 300 T Diamètre vis : 60 mm Volume injectable : 763 cm3 Poids de l’injection en PS : 702 gr Pression d’injection : 1960 bars Vitesse d’injection : 284 cm3/s Course ouverture moule max : 900 mm Epaisseur min moule : 400 mm Dimensions des plateaux : 1100 x 1100 mm Nombre de litres d’huile : 870 L Dimensions : 7,2 x 2,0 x 2,50 m Poids machine : 20 000 kg

Presse à injecter ENGEL 180 T Type : VICTORY 500/180 POWER Force de fermeture : 1800 KN - 180 T Année : 2008 Diamètre de la vis : 45 mm Volume d'injection : 318 cm³ Pression d’injection : 2040 bars Épaisseur min/max moule : 300 750 mm Distance entre colonnes : 860 x 830 mm

A Mazak CNC vertical machining center is available. Travel X/Y/Z: 1660mm/760mm/660mm, spindle power: 11kW, spindle speed: 7000rpm, table dimensions X/Y: 2000mm/760mm, max. workpiece weight: 800kg, rapid traverse X/Y/Z: 24m/min/24m/min/20m/min, feed: 5m/min, tool positions: 24. Machine dimensions X/Y/Z: approx. 4350mm/3400mm/2850mm, weight: approx. 8700kg. Documentation available. An on-site inspection is possible.

n°7 pallets of supports for TV screens, various models and sizes

Various metalworking machines and peripheral equipment are available. 1) 2x B-axes. 2) 2x flat gear motors FH77DER. 3) 3x helical gear brake motors R87DRS132S4BE11. 4) Flat gear motor FH77GDRS. 5) Variable displacement axial piston pump. 6) 2x Eisele saws with roller conveyor. 7) Drilling machine. 8) 2x pallet trucks. Some of the machines are defective. An on-site inspection is possible.

Height=2.1 m, Overall length= 1.35 m, Overall width= 1.8 m, Net weight= 1353 kg,

Height=1.1 m, Overall length= 0.777 m, Overall width= 1.244 m, Net weight= 180 kg,

Height=0.96 m, Overall length= 1.2 m, Overall width= 1.2 m, Net weight= 120 kg,

Height=1.88 m, Overall length= 0.7 m, Overall width= 3.25 m, Net weight= 850 kg,

Height=2.95 m, Overall length= 1.5 m, Overall width= 2.76 m, Net weight= 1900 kg,

Rego Vario Stainless Steel Stop Machine Rego Model: Vario The machine when it comes to striking! with automatic timer 2 working functions: 1 x stirring / 1 x beating 1 whisk 1 whisk 1 32 litre stainless steel kettle Boiler stroke manual Robust technology Connection 400V, 16A-CEE plug Used machine cleaned Quality from a specialist company! Benefit from over 35 years of experience! Option: Other accessories Ring Gas Burner Maintenance contract Service Package Delivery Instruction / Commissioning

Vacuum filler MBV / Italy Type Synchrofill Hot filling 35 filling stations + SV4 screw capper Short tube Max. approx. 7,000 containers / h Container 1.00 liter glass bottle Year of construction 2000 FILM AVAILABLE - PLEASE REQUEST

Offer 4x Cargo-Liner SP1/SP4 VKD suitable for the Linde tow tractor Linde P30C. Max. payload 500 kg Max. towing weight 3000 kg The cars are little used and in good condition.

A Plasma Finish low-pressure plasma system for surface treatment of workpieces is available. Chamber volume: approx. 15l, internal chamber dimensions X/Y/Z: 250mm/250mm/250mm, plasma frequency: 2.45GHz, plasma type: microwave, power range: 100W-600W, machine dimensions X/Y/Z: approx. 700mm/900mm/1850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-travel: 1600 mm w-axis: 800 mm b-axis: 360 ° table:: 1800 x 2200 table load: 25 t feed range: 10000 mm/min spindle turning speed range: 10 - 3000 U/min spindle taper ISO: 50 spindle motor: 37/46 kW rapid traverse: 10 m/min Control: Heidenhain TNC 640 total power requirement: 70 kW weight: 38 t range L-W-H: 8,5 x 8,6 x 5,5 mm Equipped with: - Heidenhein iTNC 640 CNC control & HR 510 handwheel - HUI 50 automatic milling head - 40-position tool changer (ISO 50) - B-axis in rotary table - Heidenhain optical scales - NC rotary table - Coolant system with paper belt filter, Coolant through Spindle 20bar - Chip conveyor - Heidenhain TS 460 measuring probe - Movable operating platform - Pfannenberg oil cooler - Central lubrication ca 4450h Spindle Hours The data for this ad was created with ModulMWS - the software solution of Logo ...

Approx. 4000 pieces of IBC standard containers used. Capacity 1000 litres Year of construction 2024 Pre-use for groceries. Emptied, but not washed. Substructure, plastic pallet. Location: near Magdeburg

Inv. Num. : 8707 Type: TrumaBend V170 Producer: Trumpf Created: 2003 Parameters: Compressive force: 170 t Maximum bending length: 4080 mm Distance between frame walls: 3680 mm Stroke: 365 mm Machine weight: 18000 kg

Glass and drying plant Lisec type VHW-20/6 Specifications: • Glass thickness (mm): up to 30 • Glass height (mm): up to 2000 • Cleaning brushes: 4 front and 4 rear

Key data: 650 mm, 600 mm, 620 mm

From a current recycling we offer you a CNC machining center from the manufacturer AVIA, type VMC 650 V. Year of construction:2023 Condition: normal signs of wear Hours: Asking price: VHB Original price: 120.000 € Equipment / accessories / other information: x/y/z 650/600/620mm, Table 800x550mm 30 mm tool magazine Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: The sale is without warranty Subject to prior sale