131,218 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Venjakob Model: HGS K Year of Manufacture: 2005 Condition: The machine is in ongoing production, is fully functional Dimensions & Capacity: - Working width: 800 mm - Working height: 920–960 mm - Passage height: 200 mm Conveyor technology: - Transport via belt - Feed speed: 3–8 m/min (infinitely adjustable) - Belt cleaning system: non-stick, without additional cleaning agents Extraction: - Dry extraction - Air flow: 4,000 m³/h - Extractor nozzle diameter: 400 mm Coating system: - 2-gun drive (Duo-Gun) - Gun control: LS 1 - 4x airless spray guns (Krautzberger KAA 1300) - 1 color wheel - 1 paint pump - Suitable for solvent and water-based paints Find more here - / Contact us at -
Rietschle Vacuum Pump TYPE: CEV3709-S4 (11) Built in 1993 Motor power 0.75 kW 2850 rpm 50Hz IP54
: 250 m³/min : 200 mbar total power requirement: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable, which, compared to the KVK 2 MA, is equipped with a cut-out for ground-level driving with a hand pallet truck. Only the application and separation of the film has to be done manually with this wrapper. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and foil slide, as well as an electromagnetic brake that can be controlled very finely via potentiometer, you can adapt the automated winding perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot windings. There are programs available for "up o ...
Our KVK 2 (MA) is a semi-automatic stretch wrapper with turntable, which can be built even more robust, better equipped and adapted to your requirements with more options compared to our entry-level model. Only the application and separation of the film has to be done manually with this wrapper. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 2 (MA) has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and foil slide, as well as an electromagnetic brake that can be very finely controlled via potentiometer, you can adapt the automated winding perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot windings. There are programs available for "up only" winding, "up & down" (cross winding), as well as "rain ...
Large-capacity system for climate testing with S! MCON Control Construction The system consists of the following main assemblies: - Walk-in, isolated test room - Air treatment room - Machine unit - Air conditioning system -Switchboard Test room The internals in the test room are made of corrosion-resistant material The test room can be illuminated, is accessible and has a condensate water and cleaning drain. Air treatment room The air treatment room is located behind the air deflector in the insulated interior. It contains the following assemblies necessary for temperature control and is accessible through easily removable plates. - Test room fans -Heat exchanger - Electric radiators - Ventilation device - Temperature probes In the air treatment room, the air is tempered (cooled/heated), humidified and dehumidified and circulated by fans. The air is sucked ...
Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible.
turning length: 750 mm turning diameter: 310 mm turning diameter over slide rest: 175 mm spindle bore: 32,0 mm tailstock quill taper MT: 3 MK turning speeds: 85 - 2200 U/min bed width: 200 mm total power requirement: 2.2 kW weight of the machine ca.: 710 kg range L-W-H: 1884 x 717 x 1262 mm New price ~ 23.000 euros from a training workshop () Furnishing: - Spindle speed continuously adjustable in 2x switching stages - TOS 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - NEWALL digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Spindle bore 32 mm - Turning diameter over cross slide 175 mm - bed width 200 mm - Spindle mount / DIN55027 5 - Spindle tap ...
turning length: 1500 mm turning diameter: 560 mm turning diameter over slide: 350 mm turning speeds: 25-220/220-1500 U/min swing diameter over bed slide: 350 mm turning dia. in gap: 785 mm quill travel: 185 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 quill:: 5 MK weight of the machine ca.: 2420 kg. range L-W-H: 2840 x 1150 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - Foot pedal with brake function according to CE - Protective device for quick-change tool holder - LED machine light - Initial filling with Shell Tellus 46 - Clamping disk 450 mm - 2 centering points - Frequency converter - Digital speed display - Slip clutch - Rapid traverse longitudinal and planar - Coolant system - Quick-change ...
turning length: 1500 mm turning diameter: 410 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52,0 mm turning speeds: 30 - 3000 U/min bed width: 250 mm spindle taper: 55029 D 1-6 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1400 kg. range L-W-H: 2530 x 1000 x 1450 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Foot pedal with brake function according to CE - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency converter - Initial filling with Shell Tellus 46 - Coolant system - Slip clutch - Thread gauge - LED machine ...
pressure: 85.0 t chamfer lenght: 2050 mm distance between columns: 1750 mm column arm: 410 mm stroke: 365 mm dayligth: 535 mm ajustment speed: 200 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec back stop - adjustable: max. 600 mm table width: 120 mm work height max.: 1050 mm Number of working hours: 28.500 h oil volume: 200 l operating pressure: 340 bar total power requirement: 14.0 kVA weight of the machine ca.: 9050 kg range L-W-H: 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition () with only approx. 28.500 operating hours - in checked condition - machine video - https://www.youtube.com/watch?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motoriz ...
bore capacity in steel (diameter): 60,0 mm arm length: 350 - 1.600 mm workpiece height max.: 665 x 1.250 mm turning speeds: 38 - 2.000 U/min spindle taper MT: 5 MK base plate: 960 x 1.760 mm threading: 42 M quill stroke: 325 mm total power requirement: 4,0 kW weight of the machine ca.: 3.800 kg. range L-W-H: 2.600 x 1.100 x 2.770 mm scope of delivery : - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - Frequency converter - Digital speed display - lift motor - hydraulic motor - Height-adjustable protective cover - operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50.0 mm throat: 360 mm bore stroke: 225 mm morse taper: 4 MK table:: 570 x 480 mm threading: M 42 Stahl turning speeds: 50-316 / 316-2200 U/min feed: 0.08 - 0.50 mm/U column diameter: 180 mm distance spindle /table: max. 580 mm distance spindle/base plate: max. 1185 mm total power requirement: 3.0 kW weight: 630 kg range L-W-H: 1020 x 750 x 2340 mm Scope of delivery - Keyed drill chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 - Motorized table stroke - Coolant device - Touchscreen - Automatic tool ejector - Electromagnetic spindle feed - Thread cutting device - Initial filling with Shell Tellus 46 - LED machine light - Digital speed display - Digital drilling depth display - Height-adjustable protective cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32,0 mm threading: 22 M bore stroke: 125 mm throat: 280 mm morse taper: 3 MK table:: 450 x 380 mm / 14er Nut turning speeds: 70 - 3.500 U/min feed: 0,1 / 0,2 / 0,3 mm/U column diameter: 110 mm weight: 320 kg range L-W-H: 500x800x2.100 mm total power requirement: 1,1 / 2,2 kW characteristics Infinitely variable speed, ideal for setting the desired one Cutting speed. Automatic tool ejector and Thread cutting device as standard. Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev Solid gray cast iron table with rotating and swiveling support surface T-slots in the machine base enable high workpieces to be clamped. Guaranteed concentricity = 0.02 mm, measured in the quill Hardened and ground gears ensure smooth running Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Drill chuck arbor MK 3 / B 16 - Reducing s ...
: 6.0 mm ST 40 : 3.0 mm VA : 30 - 140 Grad blade length: 200 x 200 mm table:: 900 x 990 mm work height max.: 940 mm Punching capacity: 35.0 in 6.0 mm ST 40 Throat / punching unit: 135 mm engine output: 4.0 kW weight: 1020 kg range L-W-H: 900 x 990 x 1200 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - hydraulic Notching machine with adjustable angle & punching station - 1 set of cutting knives - Round punch with die 12 mm - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop The data for this ad ...
roll diameter: 51 mm Wheel width: 125 mm weight: 20 kg height adjustment: 560-975 mm Furnishing: - Heavy three-sprue design for maximum loads - Roller support steplessly height adjustable and clampable - Safe workpiece support - Solid and heavy-duty galvanized steel rollers - With two rollers, each 125 mm long, ideal for pipes, ... techn. Data : Roll width 2 x 125 mm Roll diameter 51 mm Height adjustment 560 - 975 mm Load capacity, max. 700 kg Standpipe diameter 74/52 mm Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 35,0 mm bore capacity in cast iron: 40,0 mm throat: 320 mm threading: M 24 in Stahl morse taper: 4 MK bore stroke: 160 mm turning speeds: 65 - 3250 U/min table:: 500 x 420 mm throat: 320 mm weight: 375 kg range L-W-H: 600 x 870 x 2.170 mm Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve ...
width of the strips: 100 mm band length: 920 mm band speed: 7.0 m/sec loading area: 300 x 150 mm motor: 0.44 KW motor: 400 Volt range L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mm band length: 920 mm band speed: 7.0 m/sec loading area: 300 x 150 mm motor: 0.44 KW motor: 220 Volt range L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 200 mm band length: 1490 mm band speed: 8.0 m/sec motor: 400 Volt loading area: 500 x 280 mm total power requirement: 1.5 kW Dimensions (HxWxD): 750 x 600 x 340 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 600 mm turning diameter over bed: 360 mm turning diameter over slide rest: 190 mm bed width: 295 mm number of spindle speeds: 45 - 2240 U/min. spindle bore: 33,0 mm tailstock quill taper MT: MK 3 feed: Längs 0,02-0,8 mm/U feed: Quer 0,0125-0,5 mm/U total power requirement: 5,5 kW weight of the machine ca.: 1900 kg range L-W-H: 2050 x 950 x 1280 mm Refurbished and repainted in 2013 Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points - chuck key - Movable tailstock - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-blade: 350 x Ø 40 x 3 mm cutting range: 120 mm capacity 90 degrees: square: 100 x 100 mm capacity 90 degrees: flat: 170 x 100 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 95 x 95 mm capacity 45 degrees: flat: 120 x 100 mm capacity 60 degrees: round: RE 100 mm capacity 60 degrees: square: RE 85 x 85 mm capacity 60 degrees: flat: RE 85 x 100 mm work height max.: 900 mm saw blade turning speeds: 17 / 34 U/min compressed air: 6.0 - 8.0 bar total power requirement: 1.4 / 1.9 kW weight: 340 kg range L-W-H: 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - pneumatic quick clamping device - Infinitely adjustable saw blade feed - Comfortable miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously sized gearboxes - with Eisele rotation compensation for a long saw blade service life - Con ...
pressure: 225 t chamfer lenght: 3050 mm distance between columns: 2550 mm column arm: 300 mm ajustment speed: 110 mm/sec work speed: 9.0 mm/sec return speed: 130 mm/sec work stroke: 240 mm dayligth: 320 - 560 mm table height: 1000 mm table width: 200 mm oil volume: 350 ltr. operating pressure: max. 296 bar air pressure: 4.5 - 6.0 bar voltage: 400 Volt total power requirement: 18.5 kW weight: 14900 kg range L-W-H: 5180 x 2400 x 3100 mm - in checked condition - machine video - https://www.youtube.com/watch?v=ebbbzSYMxKw Furnishing: - electro-hydraulic CNC die bending/press brake - CYBELEC CNC control ModEva 12S, swiveling at the front right High-resolution graphic color screen 14 inches Representation as a line, area or volume drawing of the product Clear, concise menus in the operators language Large tools and products library - CNC-controlled back gauge adjustment (X-axis) Stop rang ...
plate thickness: 4.0 mm ST plate thickness: 3.0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4.0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9397088 The data for this ad was created with ModulMWS - the software solution of ...
plate thickness: 4.0 mm ST plate thickness: 3.0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4.0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 1000 mm turning diameter: 420 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52.0 mm turning speeds: 30-550 / 550-3000 U/min bed width: 250 mm spindle taper: 55029 D 1-6 taper in tailstock: 4 MK quill travel: 140 mm total power requirement: 5.5 kW weight of the machine ca.: 1145 kg. range L-W-H: 2090 x 1050 x 1600 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Foot pedal with brake function according to CE - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency converter - Initial filling with Shell Tellus 46 - Coolant system - Slip clutch - Thread gauge - LED ...
chucking diameter: 250 mm workpiece dia.: 200 mm control: Siemens 840 D sl c-axis: Position genauigkeit arcs 10 tool turret with 12 work positions: 12 turning spindle: 2 spindle turning speed range: 6.000 / (4.500) U/min Spindle power: 26 / (28,3) max. torque on the spindle: 150 / (300) spindle nose: 55026 - A6 tool taper: VDI 40 turning speeds: 10.000 U/min z-travel: 370 mm x-travel: 30 mm y-travel: +- 40 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 620 mm y-travel: 520 mm z-travel: 460 mm c-axis: 360 ° b-axis: -50 / +110 ° distance spindle nose and table: 170 - 630 mm CNC-control: iTNC 640 HEIDENHAIN Table dimensions: Ø 650 mm max. table load: 500 kg spindle turning speed range: 12.000 U/min drive capacity - spindle motor: 15,5 / 33,0 kW rapid traverse: 48 m/min tool change unit: 48 Pos. SK 40 coolant: IKZ 30 bar voltage: 400 V total power requirement: 35 kVA weight of the machine ca.: 10,0 t dimensions of the machine ca.: 4,00 x 2,46 x 2,85 m chip conveyor: 2,90 x 0,50 x 1,30 m coolant tank: 2,30 x 1,70 x 0,45 m coolant pump: 0,60 x 0,50 x 0,90 m Oil cooler: 0,55 x 0,60 x 1,10 m 5-axis simultaneous machining center - Serial-No.: 9496-117 - Control ON: 10,137 h - Spindle ON: 3,380 h - Control: HEIDENHAIN iTNC 640 - electr. handwheel - IKZ 30 bar - chip conveyor The data for this ad was created with ModulMWS - the sof ...
Height=1.63 m, Overall length= 1.02 m, Overall width= 0.75 m, Net weight= 1245 kg,
Our pallet wrapper "Starter" is a semi-automatic stretch wrapper, perfect if you no longer want to wrap your pallets by hand or are looking for an inexpensive backup device. Our Vogel Starter is possibly the cheapest pallet wrapper from European production, and without compromising on quality. In contrast to our other pallet wrappers, the number of options here is very limited, because here we wanted a pallet wrapper that could be produced as cheaply as possible through the greatest possible standardization and covered many applications. With the 3 programs, you can set how fast the foil carriage and turntable run and whether you want a "cross winding" or or "just wrap up". Head windings and foot windings can also be saved for each program. You can easily control the brake tension using the mechanical foil brake. The programs can be protected by a password, so that the user ...
Our Profiline is a semi-automatic stretch wrapper, which guarantees absolutely consistent results thanks to up to 32 storable programs and thus offers the safe exclusion of the "human factor". With the electromagnetic brake, the tension of the film can be precisely stored in the individual steps (foot winding, winding up / head winding / winding down) in the programs. As part of the programs, you can also adjust how fast the foil carriages and turntables run. Head windings, foot windings and the overlapping of the film at the end of the pallet can also be stored for each program. In this way, you can store individual programs for each packing scheme in order to achieve ever more perfect winding results. The programs can be protected by password, so that the user can only choose from the stored programs. With a weight of 420 kg, this model is designed for loads of up to 1200 kg ...
Our KVK 2A is a semi-automatic stretch wrapper with a cut-out for driving at ground level. The KVK 2A model is equipped with a pre-stretch system for 250% elongation. Thanks to the pre-stretching system, you can produce up to 3.5 metres of film on the pallet from 1 metre of film on the roll and reduce your material consumption enormously. In addition, this system creates only a minimal application tension, so that even light packaged goods are not pulled from the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 2A has a 1500 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and foil slide, as well as a power stretch unit that can be controlled via potentiometer, you can adapt the automated winding perfectly to your product. Automatic recognition of your pallets ( ...
The KVK 600 is ideal if you are looking for a mobile solution to stretch your packaged goods. Or have packaged goods that are too large or too heavy for a pallet wrapper with a turntable. With the electric steering, the KVK 600 can be easily moved to any corner of your warehouse. Its battery is designed for 8 hours of continuous use. The KVK 600 has a power stretch system with up to 300% elongation. This significantly reduces your film consumption, because 1 meter on the roll becomes 4 meters on the pallet. In addition, this system creates only a minimum application tension, so that even light packaged goods can be wrapped well. For the KVK 600, up to 10 individual programs can also be stored, in which you can specify for each step (foot windings, windings ascent, head windings and windings descent) how fast and with what foil tension they should be executed. This allows you to sto ...
Our "Basic" pallet wrapper is a semi-automatic stretch wrapper made in Europe, which guarantees absolutely consistent results thanks to up to 10 storable programs and thus offers the safe exclusion of the "human factor". With the electromagnetic brake, the tension of the film can be adjusted to your needs and stored in the programs. As part of the programs, you can also adjust how fast the foil carriages and turntables run. Head windings and foot windings can also be saved for each program. In this way, you can store individual programs for each packing scheme in order to always achieve perfect winding results. With a weight of 260 kg, this model is suitable for loads of up to 1200 kg Our Basic Pallet Wrapper has a 1500 mm turntable and can wrap pallets up to 2000 mm high as standard. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustab ...
Our Profiline TP is a semi-automatic stretch wrapper, which guarantees absolutely consistent results thanks to up to 32 storable programs and thus offers the safe exclusion of the "human factor". With the electromagnetic brake, the tension of the film can be precisely stored in the individual steps (foot winding, winding up / head winding / winding down) in the programs. As part of the programs, you can also adjust how fast the foil carriages and turntables run. Head windings, foot windings and the overlapping of the film at the end of the pallet can also be stored for each program. In this way, you can store individual programs for each packing scheme in order to achieve ever more perfect winding results. The programs can be protected by password, so that the user can only choose from the stored programs. With a weight of 420 kg, this model is designed for loads of u ...
Our KVK 5 is a semi-automatic rotary arm wrapper that, compared to our turntable wrappers, has the advantage that your pallets can be placed at ground level for the wrapping process. It is equally ideal for light and unstable as well as heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity has to be observed. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. With this pre-stretching system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only a minimum application tension, so that even light packaged goods are not pulled off the pallet. Only the application and separation of the film has to be done manually with this wrapper. The machine weight of almost 1000 kg shows how solid and stable this winder is. ...
Manual cream filler. Sold with two pumps. Barely used, in very good condition., Capacity (ml): mini 10 / Maxi: 160 , Hopper volume:: ca. 10 liters , Link to manufacturer: wuerschum/appareils-manuels.html, Cadence / hour: 30-600 pieces/hour
CNC vertical machining center Type: Mikron VCE 800 Pro Manufacturer: GF AgieCharmilles Year: 2011 Control: Heidenhain iTNC 530 X: 800 mm Y: 500 mm Z: 540 mm Table: 910 x 500 mm Max table load: 1100 kg Max spindle speed: 14000 rpm Tool magazine: 24 positions Machine weight: 5000 kg Cooling and rinsing through the center of the spindle. Work and tool probe included New spindle in 2018 Machine in good condition, under power Find more here - / Contact us at -
Manufacturer: Vecoplan Model: VAZ 1300 Year of Manufacture: 2011 Type of Machine : Shredder System Technical Details: - Year of Manufacture: 2011 - Operating Hours: 4,718 - Throughput (depending on material): - Shredding stage P-3: approx. 1,300 kg/h - Shredding stage P-4: approx. 1,000 kg/h Performance Data: - Permissible load lifting device: 600 kg - Max. lifting speed: approx. 6 m/min Shredding performance (depending on screen hole size): - With 15 mm screen: approx. 700–800 kg/h - With 20 mm screen: approx. 1,000 kg/h - With 30 mm screen: approx. 1,300 kg/h Conveyor capacity: - Scraper chain conveyor: approx. 25 m³/h - Scraper chain conveyor speed: approx. 18.8 m/min - Screw conveyor speed: approx. 4.5 m/min Condition: - Shredder is disassembled. - In photos, hopper is rotated 90° and placed loosely. - No discharge conveying system (scraper chain conveyor) included. ...
A vertical automatic surface spraying machine Venjakob in compact design is available. Working width: 800mm, working height range: 920mm-960mm, pass-through height: 200mm, feed speed: 3m-8m/min, air flow rate: 4000m³/h, extraction nozzle diameter: 400mm, gun control: LS1, airless spray guns: Krautzberger KAA 1300. Includes conveying system, extraction system, 2-gun drive, 4x spray guns, paint circulation system, and paint pump. Documentation available. An on-site inspection is possible.
Our VOGEL MH-FJ-2 carton sealing machine has a side drive belt system. The machine automatically adapts to the respective carton size within the specified range. Carton formats: Length 150 – ∞ mm Width 140 – 480 mm Height: 120 – 480 mm Specifications: Length 1,150 mm Width 1,005 mm Weight 250 kg Operating voltage 220 V Air 5 kg/cm2 CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Our MH-FJ-2 carton sealer is specially developed for changing carton formats Been. By means of a pneumatic adjustment of height and width, it is possible to Constantly changing carton formats are processed quickly and easily with manual intervention become. The machine adapts to the different formats at lightning speed. Through two side & two top conveyor belts will transport your cartons securely thro ...
Our VOGEL MH-FJ-1AW carton sealing machine has a side drive belt system. Carton formats: Length 150 – ∞ mm Width 100 – 480 mm Height: 120 – 480 mm Specifications: Length 1,090 mm Width 890 mm Weight 180 kg Operating voltage 220 V CE marking Accessories: In addition to our VOGEL carton seamer range, we offer track rollers, leading and trailing tables, roller conveyors.
The VOGEL MH-FJ-1AWS carton sealing machine has a side drive belt system. The machine is specially designed for cardboard boxes in smaller formats. Carton formats: Length 160 – ∞ mm Width 90 – 320 mm Height: 60 – 280 mm Specifications: Length 1,090 mm Width 890 mm Weight 85 kg Operating voltage 220 V CE marking Accessories: In addition to our VOGEL carton seamer range, we offer track rollers, leading and trailing tables, roller conveyors.
VISION WIDE SF-2116 CNC PORTAL MILLING MACHINE Year of construction 2016 Fanuc 31i ModelB Table : 2000 X 1500 mm X-axis travel 2000 mm Y-axis travel 1500 mm Z-axis travel 800 mm Engine power: 44 kW With tool changer Total weight : 20t approx. Horizontal Head 90 Degree
The VOGEL YS501X ECONOMIC carton sealing machine is our recommendation especially for rather large carton formats that are glued in series Carton formats: Length 150 – ∞ mm Width 150 – 500 mm Height: 140 – 560 mm Specifications: Operating voltage 220 V CE marking Accessories: In addition to our VOGEL carton seamer range, we offer rollers, feed and trailing tables, as well as roller conveyors. Our YS501X ECONOMIC carton sealer is a cost-effective solution when it comes to securely sealing cartons in rather large formats. Two side conveyor belts ensure that your cartons are safely transported through the carton sealer. The carton width is adjusted mechanically via a crank. The height adjustment is particularly easy and quick to solve on this machine, because the upper gluing unit only has to be unlocked and can then be easily brought to the respective height. Due ...
x-travel: 760 mm y-travel: 610 mm z-travel: 610 mm control: Heidenhain 530 total power requirement: kW weight of the machine ca.: 6700 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2000 KW, 2500 kVA, 6300 V
MWM TCG 2020 V20 YEAR 2006 Hours: 16.000 (total hours) like new 2000kw 2500kva 6300volt AVK Generator all documents are available! scope: Genset on frame with alternator Gasline Control panel Cpu panel Pomps Transformer Genset located in our warehouse: Kranenpool 10 6443VA Brunssum Netherlands
Our KVK 3 is a semi-automatic stretch wrapper with turntable, which is equipped with a pre-stretch system for 250% elongation compared to the KVK 2 (MA). Thanks to the pre-stretching system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only a minimal application tension, so that even light packaged goods are not pulled from the turntable. Only the application and separation of the film has to be done manually with this wrapper. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 3 has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and foil slide, as well as a power stretch unit that can be controlled via potentiometer, you can adapt the automated winding perfectly to your ...
Key data: 2000 KW, 2500 kVA, 6300 V
MWM TCG 2020 V20 YEAR 2006 Hours: 16.000 (total hours) 2000kw 2500kva 6300volt AVK Generator all documents are available! scope: Genset on frame with alternator Gasline Control panel Cpu panel Pomps Transformer genset in stock in our warehouse: address: Kranenpool 10 6443VA Brunssum
Technical data of the pallet rack crossbar: Shelving system: Voest Alpine Type: Megastar GS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: hot-dip galvanised CS profile: 100 x 50 x 10 mm Agraffe: 4 HK (hooks) Clear width: approx. 2,700 mm 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
maximum number of results exceeded
please refine your search
