delta v used for sale

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2860 rpm -Shaft: Ø 32 mm -Design: B5 -Protection class: IP 44 -Quantity: 1x electric motor available -Price: per piece -Dimensions: 450/250/H310 mm -Weight: 57 kg

CENTRO DI LAVORO KIA V25- ANNO 2005, CNC FANUC 0i-MB PALLET:2 UTENSILI SORAGE: 16 STAZIONI MANDRINO BT30 Giri/min: 10000 TABELLA:500X300X500 FULL DI MANUALI E ATTREZZATURE. MACCHINA MOLTO VELOCE e veloce da equipaggiare. COLLEGATA ALL'ALIMENTAZIONE IN PRODUZIONE.

Electric motor, three-phase motor -Power: 6.8 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: - -Dimensions: 475/285/H330 mm -Weight: 69 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1480 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: - -Dimensions: 470/285/H350 mm -Weight: 69 kg

WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS 2. AWAILIBLE Included with safety glass and two button pust operational system. with all safety system integrated and working table. WELDING NOMINAL POWER - 56 kWA AT 50% THROAT IN 450mm

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1245 rpm -Shaft: Ø 32 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 445/255/H295 mm -Weight: 51 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1435 rpm -Shaft: Ø 38 mm -1x design: B3/B5 -1x design: B5 -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 480/285/H335 mm -Weight: 69 kg

Three-phase motor, electric motor -Power: 4 kW -Speed: 2840 rpm -Shaft: Ø 30 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 560/250/H215 mm -Weight: 55 kg

electric motor, three-phase motor -Power: 0.55 kW -Speed: 1380 rpm -Shaft: Ø 19 mm -Design: B5 -Protection class: IP 54 -Dimensions: 250/200/H195 mm -Weight: 10.6 kg

Gear motor, electric motor, electric gear motor -Engine manufacturer: VEM -Manufacturer gearbox: VEM -Speed: 295 rpm -Power: 1.1 kW -Construction: B5 -Diameter shaft: 40 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 530/250/H380 mm -Weight: 56 kg

Cuccolini Vibratory sieve Serial: AR0506 Stainless mesh 600mm diameter, 200kg hopper mounted on top, twin vibrators, comes with two meshs, 3Ph

Cuccolini Vibratory sieve Serial: AR0506 Stainless mesh 600mm diameter, 200kg hopper mounted on top, twin vibrators, comes with two meshs, 3Ph

Gear motor, electric motor -Transfer in current condition as seen -Speed: 102 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Dimensions: 540/260/H300 mm -Weight: 52 kg

Three-phase motor, electric motor -Power: 0.75 kW -Speed: 1420 rpm -Shaft: Ø 22/18 mm -Construction: B5 -Protection class: - -Dimensions: 340/160/H200 mm -Weight: 15.4 kg

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm 2 saw blade speeds: 40 / 80 rpm. Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug. free domicile within Germany

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Quantity: 12 collets -Various sizes: 5-25 mm -Drawing in the pictures -Price/Sale: complete -Weight: 2.1 kg

properties: Used belt conveyor Color: light gray SEW gear motor available With Pneumatic Energy Incl. feet Material: Steel Ideal for fast material transport Expertly dismantled and packed Condition: fully functional Stock: 9 pieces Price per pc. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 3,500 mm Total width: 1,000 mm Belt width: 600 mm Divided into three sections 1x 570mm length 2x 1.240mm length Belt conveyors The webbing belt is ideal in the picking zone to interlink machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive containers, boxes or other packaging and article units of different sizes to the loading or delivery point and also serves, for example, as a connecting line in front of or betwe ...

Collet collet sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Number: 6 pieces clamping sleeves -different sizes: 17-25 mm -Drawing with the pictures -Sale: only as a package -Weight: 1.5 kg

properties: Used belt conveyor Color: light gray SEW gear motor available 2.2 Kw With Pneumatic Energy Incl. feet Material: Steel Ideal for fast material transport Expertly dismantled and packed Condition: fully functional Stock: 8pcs Price per pc. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 3,500 mm Total width incl. motor: 1,180 mm Total width without motor: 800 mm Belt width: 700 mm Conveying height: 850mm, height adjustable Divided into three sections 1x 600mm length 2x 1.250mm length Belt conveyors The webbing belt is ideal in the picking zone to interlink machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive containers, boxes or other packaging and article units of different sizes to the loa ...

VanRiet belt conveyor 628 cm Long belt 50 cm Manufacturer: Van Riet Type: Folding Element Belt Conveyor Band length: 628 cm Segment lengths: (1,250 + 6,120 + 1,000 mm) Band width: 50 cm Frame width: 65 cm Lane height: 85 cm Version: Driven Electric motor: 380 volts incl. stands Shipping via forwarding agency possible, please contact us. More items - new and used - can be found in our shop! International shipping costs on request!

Gear motor, electric motor -Speed: 40 rpm -Power: 0.8kw -Construction: B3 -Diameter shaft: O 28 mm -Protection class: IP 44 -Number: 1x available -Dimensions: 410/190/H260 mm -Weight: 26kg

Gear motor, electric motor, electric gear motor -Speed: 80 rpm -Power: 0.37 kW -1x design: B5 -1x design: B3 -Diameter shaft: 22 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 365/138/H200 mm -Weight: 12.8 kg

Zoller V520B Magnum Setting and Gauge Manufacturer: Zoller Type: V 520 Magnum Year of construction 1998 Specifications: Voltage 230 V Compressed air 4-6 bar Weight 180kg Under table 140kg Maximum tool weights Manual focusing max. 1000 N Automatic focusing max. 200 N More items - new and used - can be found in our shop! International shipping costs on request!

Three-phase motor, electric motor -Power: 4 kW -Speed: 725 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 550/410/H305 mm -Weight: 97 kg

Three-phase motor, electric motor -Power: 10 kW -Speed: 1450 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 560/420/H340 mm -Weight: 124 kg

Three-phase motor, electric motor -Power: 10 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Dimensions: 550/360/H370 mm -Weight: 121 kg

Electric motor, three-phase motor -Power: 0.8 kW -Speed: 1410 rpm -Shaft: Ø 18 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 270/230/H200 mm -Weight: 16 kg

VMI Spiral Kneader Type: MB1024 AEH Specifications: – Automatic timer switching on and off – 2 speeds slow and fast – with 1 boiler – with flour dust cover - Year of construction 1999 Height: 180cm Width: 140cm Depth: 120cm

Electric motor, three-phase motor -Power: 5 kW -Speed: 1440 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 2x available -Dimensions: 530/370/H280 mm -Weight: 80 kg

Three-phase motor, electric motor -Power: 45 kW -Speed: 2940 rpm -Shaft: Ø 55 mm -Height of shaft axis: 200 mm -Design: B3 -Protection class: IP 54 -Dimensions: 750/380/H490 mm -Weight: 287 kg

Gear motor, electric motor -Speed: 19 rpm -Power: 0.4 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Height shaft axis: 200 mm -Dimensions: 530/250/H295 mm -Weight: 56 kg

diameter: M5/M64 mm weight: / kg Type: / 0 different types available: tapping head GB2 - 150 Euro tapping head GB3 - 250 Euro tapping head GB5 - 450 Euro The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Standard configuration ? Stable machine frame as a welded, all-steel construction ? Ram (press beam), highly resistant to torsional forces ? Electrohydraulic downstroke drive via proportional valves ? Modern block hydraulics ? CNC backgauge with rack-and-pinion drive, for X and R axis, safe adjustment of stop fingers from the front ? Modufix upper tool clamping system, manual ? Lower tool holder for single-V dies, manual clamping, programmable shifting ? Control system: 2D/3D graphic control, Delem DA 69 with 12 color screen (LCD) ? Safety equipment Additional equipment Crowning options ? CNC crowning Backgauge system options ? 4-axis backgauge system ? 2 additional clip-on stop fingers Tool clamping and angle messuring system ? Upper tool claming, hydraulic ? Lower tool clamping, hydraulic ? ACB Preparation Material handling options ? 2 front support brackets

Gear motor, electric motor -Speed: 56 rpm -Power: 0.8 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Dimensions: 500/240/H295 mm -Weight: 50 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 710 rpm -Shaft: Ø 32 mm -Construction: B3 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 490/340/H260 mm -Weight: 63 kg

Three-phase motor, electric motor -Transfer in current condition as seen -Foot damaged, see photo -Power: 3.5 kW -Speed: 1440 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 470/350/H300 mm -Weight: 62 kg

Machine Details Stock number 1105-037895 Machine type machining center - vertical Brand HURCO Type VMX 40 Year of construction 2000 Control type CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight base from site Technical details x-travel 1060 mm y-travel 508 mm z-travel 650 mm Working surface 1200 X 610 mm Motor power (30 min. ED) 15 kW Distance between table and spindle 150 - 760 mm Torque 600 Nm rpm 30 min ED 22 Tool changer 30 times Ultimax 4 Control Machine weight ca. 6 t Information HURCO VMX 40 BORN 2004 CNC ULTIMAX 4 Synchronous.Thread 8000 rpm SPAENEFOERDEREr

Tripod ( column foot ) new, galvanized. Tripod new, galvanized 22,90€ Stück / piece Forkhead/fork head 6,80€ Stück / piece all prices excl. VAT and transport Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm., Tel. 07305/9562350, Fax. 07305/9562352 , VAT ID NO.: DE279047055 Office/ warehouse address:Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Mobile: 0049 176 70044689 Mr. Becker Register court Ulm: HRA722943

Geared motor, electric motor, three-phase motor, right-angle gear motor -Speed: 25 rpm -Power: 0.6 kW -Voltage: 500 VOLT Y -Design: B3 -Shaft diameter: Ø 38 mm -Protection class: IP 44 -Price: per piece -Quantity: 2 available -Dimensions: 490/250/H290 mm -Weight: 39 kg

Gear motor, electric motor -Speed: 100 rpm -Power: 3 kW -Design: B5 -Diameter shaft: Ø 48 mm -Protection rating: IP 44 -Quantity: 1 piece available -Dimensions: 700/250/H320 mm -Weight: 57 kg

Gear motor, electric motor, electric gear motor -Speed: 9 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: 47 mm -Protection class: -Dimensions: 700/250/H280 mm -Weight: 46 kg

The machine is complete Light or low refurbishment required

Planer width 630 mm chip removal 8 mm Planer shaft type Xylent spiral Main engine 7 kw HP HP 9,5 50 Hz Third pull-out roller min max planing height 3.5 mm - 300 mm

Gear motor electric motor -Speed: 200 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 32 mm -Protection class: -Price: per piece -Number: 2x available -Weight: 38 kg

Conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt -Thickness: 7.0 mm -Width: 39 mm -Length: 22,000 mm -Number: 1x ribbons available -Price: per piece -Weight: 6 kg

Machine Details Stock number 1105-03797 Machine type machining center - vertical Make BRIDGEPORT Type VMC 600 2 DIGITAL Year of construction 1999 Control type CNC Control HEIDENAHAIN TNC 426 PB Storage location FRANCE Country of origin UK Delivery time immediately Freight base from stock HAGUENAU FRANCE Technical details x-travel 600 mm y-travel 510 mm z-travel 600 mm Control HEIDENAHAIN TNC 426 PB Table clamping surface 800 X 500 mm Rapid traverse 30/30/30 m/min Speed range 40- 1000 rpm Drive power - milling spindle 13 kW Number of tools in the magazine 22 pieces Information 3-axis CNC machining center m Accessories: HEIDENHAIN TNC 426 PB - Synchronized tapping - flat guides in all three Axes - RS-232 interface SPAENEFOEDERER

Sell Vacuum pump used Type: Busch 250-138, Vacuum: 20 mbar, Motor Oil: Type SAE30, Engine: Delfin, Year of manuf.: 2012, Power 3,45 kW, 230 volts, 15 A,

VEAGOO MACHINE VT-210X packaging machine was manufactured in 2020 in China. Characterised by its simple operation and reliability, the machine is designed for packing products i.e. disposable gloves or masks in bags made of various types of plastic. Highly efficient operation is achieved thanks to the used components and technology, saving time and materials. The VT-210X packaging line automatically determines the cutting length of the bags, then packs them with products with a maximum height of 85 mm, and at the end seals the pack very carefully. Depending on the size of the product being packed, the packaging machine is capable of producing up to a maximum of 150 bags per minute. The packaging machine is equipped with, among others, a PANASONIC PLC control and a YATAI temperature controller. The total weight of the machine is 650 kg. Technical specifications of the VEAGOO MACHINE ...

Gear motor, electric motor -Speed: 32 rpm -Power: 0.75 KW -Design: B5 -Diameter shaft: Ø 32 mm -Protection class: IP 55 -Number: x motors available -Price: per piece -Dimensions: 490/200/H235 mm -Weight: 27 kg

Four-side planer with 4 planing heads •Powerful with 4 motors Hsvwvkytm Voltage 400 V / 3 / 50 Hz Motor power 17,1 kW finished workpiece width 180 mm min. finished workpiece width 25 mm finished workpiece thickness 105 mm min. finished workpiece thickness 10 mm min. length of the workpiece - for single feed 350 mm - at group feed 250 mm Number of working spindles 4 Spindle speed 6000 min-1 Spindle diameter 40 mm Cutterhead diameter 120 mm Length of horizontal spindles 190 mm Length of vertical spindles 120 mm Feed speed 6; 12 m/min Diameter of feed rollers 120 mm Length of feed table 1700 mm Distance of the feed table from the floor 920 mm Quick adjustment of the feed table and ruler 10 mm Weight 1000 kg