delta v used for sale

geared motor, electric motor -Speed: 160 rpm -Power: 0.55 kW -Design: B5 -Shaft diameter: Ø 28 mm -Protection class: IP 44 -Number: 1x motor available Price: per piece -Dimensions: 470/160/H200 mm -Weight: 22 kg

Gear motor, electric motor, three-phase motor -Speeds: 80 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 22 mm -Protection class: IP 54 -Price: per piece -Number: 12x available -Dimensions: 350/160/ H200 mm -Weight: 10.1 kg

Gear motor, electric motor, electric gear motor -Speed: 120 rpm -Power: 0.25 kW -Diameter: Ø 20 mm -Construction: B3 -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 340/190/H175 mm -Weight: 12.5 kg

Geared motor, electric motor, electric geared motor -Motor power: 0.25 kW -Speed: 25 rpm -Design: B3 -Drive shaft Shaft: Ø 24 mm -Quantity: 1 piece, motor included -Dimensions: 400/175/H215 mm -Weight: 16 kg

Gear motor, electric motor -Speed: 63 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: IP 44 -Number: 10x gear motors available -Price: per piece -Weight: 19 kg

Geared motor, electric motor, three-phase motor, right-angle gear motor -Speed: 32 rpm -Power: 0.6 kW -Design: B3 -Shaft diameter: Ø 38 mm -Protection class: IP 44 -Dimensions: 500/250/H280 mm -Weight: 41 kg

Three-phase motor, electric motor -Power: 13/19 kW -Speed: 730/1460 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 670/357/H440 mm -Weight: 198 kg

Three-phase motor, electric motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 32 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 480/340/H304 mm -Weight: 70 kg

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -1x holder: Ø 32x38 mm -1x holder: Ø 50x45 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -1x: holder suitable for tool changer -Sale: only complete -Weight: 8 kg

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for tool changers -with CNC pull studs -Sale: only complete -Weight: 8 kg

Gear motor, electric motor, three-phase motor -Speed: 80 rpm -Power: 11 kW -Construction: B5 -Shaft diameter: Ø 75 mm -Protection class: IP 44 -Dimensions: 935/700/H520 mm -Weight: 178 kg

Tool holder, milling holder, milling tool -Number: 5x SK45 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 14 kg

Make: ISHIKA WAJIMA HARIMA BROWN BOVERI Type: VTR 564-11 Serial Number: XI 97711 & XI 97712 RPM: 13800 T MAX: 620°deg.C N.MAX: 230 1/s Specification: V 01113, R 011, H 01112 W02108, E 01113 L36100, T 04100

Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 10 kg

Laska Mixer ME 250 VAC Capacity 180 Kg Mixing System Z Arm Kneader Mixer

Tool holder, milling tool holder -Number: 21x SK50 recording -various versions -Drill chucks, surface chucks, reducing sleeves, cutter heads, end mills, spindle tools -Price/Sale: complete -Weight: 82 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Electric motor SIDO type: D160L-84 -Motor power: 7.5/12 kW -Speed: 720/1435 rpm -Hydraulic pump Sperry Vickers type: GC4/40/3/10 -Max. Pressure: bar -Dimensions: 960/400/H520 mm -Weight: 242 kg

Electric motor, three-phase motor -Power: 17 kW -Speed: 2910 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 630/460/H420 mm -Weight: 160 kg

Universal clamping pad -Execution: Toothed like a staircase. For use in pairs. Individual pads can be used in conjunction with clamps. -Support height: 72 to 240 mm. -Material: Heat-treated steel, painted. -Scope of delivery: 3 sets of different sizes -Weight: 6.2 kg

Tool holder, milling holder, milling tool -Number: 58x SK40 mounts -different designs -partly with pull studs -Spindle tools: different diameters -Sale: only complete -Weight: 108 kg

Tool holder, milling holder, milling tool -Number: 10x SK50 mounts -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 40 kg

Tool holder, milling holder, milling tool -Number: 9x SK50 mounts -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 34 kg

Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for tool changers -Sale: only complete -Weight: 10 kg

Tool holder, milling holder, milling tool -Number: 15x SK50 mount -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 50 kg

Three-phase motor, electric motor -Power: 1.85 kW -Speed: 2845 rpm -Shaft: Ø 24 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 300/240/H205 mm -Weight: 20 kg

electric motor, three-phase motor -Power: 6.8 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Design: B5 -Protection rating: - -Dimensions: 480/300/H360 mm -Weight: 70 kg

Gear motor, electric motor, three-phase motor -Speed: 40 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: Ø 22 mm 1x with short shaft -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 350/160/H200 mm -Weight: 12.2 kg

Gear motor, electric motor, electric gear motor -Speed: 105 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: 32 mm -Protection class: IP 44 -Number: 3x engines available -Price: per piece -Dimensions: 520/200/H225 mm -Weight: 32 kg

Gear motor, electric motor -Speed: 54 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Dimensions: 395/185/H185 mm -Weight: 16.5 kg

Vibrator PROFILINE RLA-H.7S, max. format 1220 x 1640 mm with spread roller and pneumatic push-out to the rear, Auto. Rear table assembly with plier transport system AM 1220x1640 mm High-speed cutter SCHNEIDER SENATOR 185 SC-Video Cutting width max. 1850 mm Stacker ABS 145-7B , max. format: 1220 x 1640, max. stack height 1450 mm Footprint approx. 8 x 8 m

Suction fan Slow runners D= 350mm Air capacity 6250m³/h

Square notching tool, notching side knife, die holder, cutting tool, punching tool, punch, punching die, punching punch -Punching tool: square notching tool -Punching dimensions: 40 x 79 mm square -Dimensions: 225/145/H95 mm -Weight: 10.6 kg

Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch punch -Shearing tool for T-steel: 120 x 70 mm -Square: 25 mm -Round: 27mm -Type: 50305 -Dimension respectively: 175/140/15 mm -Weight: 5kg

Format range: 1150 mm, min. 86 mm Equipment: Longitudinal seam, folding floor, double edge, electronic upper glue unit with 2 application heads, Disc upper glue unit, disc glue unit on the left, Pre-crusher right and left, kicker, counter, medium transport in folding, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new Feeder and transport belts equipped.

Tool holder, milling holder, milling tool -Number: 25x SK50 mounts -various: versions -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 100 kg

Turning device, forging device, welding turning device, welding device -for: production of spirals, springs ... -Holder: Ø 88 x 300 mm -Speed: 31 rpm -Drive: 1.5 kW -Voltage: 400 V -Dimensions: 1000/550/H1200 mm -Weight: 120 kg

Gear motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Dimensions: 380/160/H190 mm -Weight: 14 kg

REF-2261 AUTOMATIC CAN SEAMER SOMME NORA-313-VAC WITH VACUUM FILLING MACHINE 6 VALVES Automatic tin can seaming machine with 6-valve filling system Manufacturer: SOMME Model: NORA-313-VAC Can size: 3kg Output: 3,000 cans/ hour Vacuum pump dimensions: width 1,000mm, length 1,300mm, height 1,800mm Overall dimensions: width (including infeed belt) 3,600mm, length 1,900mm, height 2,000mm

Three-phase motor, electric motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 30 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 450/148/H290 mm -Weight: 51 kg

I sell the scM Multiflex window angle system. Milling heads VIVALDI EU68mm. Incision + cone spindle right / cone side. 2 pcs. profile milling spindle + glass list cutting saw left / roll forming side Available the same.

The radial fan is unused and has not been installed. For further technical details, please refer to the type plate. Price is negotiable. Shipping possible. The sale is carried out on behalf of the customer. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

Three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated -Power: 1.1 - 5.5 kW -Speed: 420 - 2100 rpm -Shaft: Ø 30 mm -Construction: B3 -Protection class: IP 21 -Dimensions: 860/430/H480 mm -Weight: 244 kg

New VDL 2D chiseling machine with the possibility of automatic drilling at distances of 25 and 32 with the possibility of tilting and turning in 2 directions. Technical parameters: Control of the machine with 1 lever Power of the main motor: 1.5 kW Tool speed: 2850 rpm Spindle diameter: 3 - 16 mm Stroke of the spindle: 180 mm Dimensions of the table: 600 x 450 mm Weight of the machine: 320 kg

Gear motor, electric motor -Speed: 78 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -electric coupling -Dimensions: 395/190/H180 mm -Weight: 14 kg

Engel Victory 750/150 Tech (146) without funnel Item number: 146 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 354 g Clamping force: 1,500 kN Screw diameter: 50 mm Spray pressure: 1427(1909) bar Spar spacing: Tie barless mm Clamping plate size: 750 x 850 mm Control: CC200 Language: German Power: 61 kW Operating hours: 98108 h Weight: 9500 kg Dimensions: 5.7 x 2 m Funnel: No Core train: Yes Euromap: Yes

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1440 rpm -Shaft: Ø 32 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 475/300/H380 mm -Weight: 69 kg

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1430 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 445/260/H310 mm -Weight: 46 kg

Inauen Maschinen AG Diptank Model: VC999 Stainless dip tank, chamber size 600mm L x 400mm W x 300mm H, digital temp control, mobile, 3Ph

Capacity: 2800 Watt volume: 100 L filter: HEPA : 230 mbar material: INOX Edelstahl Behälter : 5000 mm hose diam.: 32 mm : 5000 mm noise: 82 dB dimensions: LxBxH 50 x 50 x 135 cm weight: 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.