delta v used for sale

Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Water-cooled Vötsch Temperature Test Chamber VTS 7027-20 Temperature range: -70°C to +180°C Temperature change rate: Temperature deviation in time ± 0.3 to ± 0.8 K Temperature deviation ± 0.5 to ± 2.0 K Change speed Cooling 20 K/min Change speed heating 20 K/min External dimensions: Width 780 x Depth 1895 Height 1900 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 20 kW Rated current 36 A Refrigerant R404A / R23 Climate test: Temperature range +10 to +95 Humidity range 10 to 98 % approx. 270 litres weight: 950 kg Type: VTS 7027-20 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally comp ...

Producer: BONGARD Weight: 160 kg Length x width x height: 1230 x 780 x 550 mm Power supply: 400V/50 Hz Convection steam oven - Heater rods 10.30 kW - 4 shelves inside dimensions 400 mm x 420 mm - Height between the shelves 90 mm - Temperature up to 250 ° C Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 ABC.inter-wiba.com.pl Info@inter-WIBA.com.pl Tel. 0048 33 8125860

Cabins of disassembly for the following machines: ISEKI SG incomplete ISEKI SF 300 330 333 ISEKI TX ISEKI 5000 / 5100 Gutbrod 2850 AS incomplete SABO 1502 Voss incomplete Ransomes 350 D incomplete Ransomes Commander 3510 Ransomes fairway 405 Shibaura CM reform Reform Muli - only door right side Kramer Tremo - only door right side

Dear Sir or Madam, for you in the offer : Granulator/cutting machine available directly from stock! Can be used in cable processing/cable recycling, plastic shredding and destruction of plastic and plastic parts Granulator/Granulator/Granulator Type: RMH 16/22 VGA _ 4 KW Drive Power (See table for more data) Other granulator/cutting machine on request) RMH 16/22 VGA/drive power: 4 KW Features RMH Granulator: - A knife set is installed in the RMH Granulator RMH. - A sieve insert is installed (perforation as desired.). - The following screen inserts are available in stock: 1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm - V- Section Geometry - Lenze Electric Motor / Schneider Electric Box and Circuit Breaker - Easy tilting of the filling hopper - Available with wheels/2 x fixed castors/2 x brake rollers or adjustable rubber-mounted feet - Available with different bays 1) ...

RECON MWM TCG2020-V16 Part number: 1242 0453 HT837937 / TPS52-F33 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 1,200 mm Total width incl. motor: : 660 mm Total width without motor: : 500 mm Belt width: 400 mm Strap type: lentsrillen/ black Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of ...

Varian Saturn 2100 T GC/MS system, used Ion trap with Turbo molecular pump Measurement range: 10-650 amu EGG Varian DS 102 backing vacuum pump complete with PC, LCD monitor, and software as well as NIST library Option autosampler: Varian 8400,CTC GC PAL or CTC PAL wagon

Vessel reverser in Exchange / reverse gear on exchange basis AS 71C; AS 72C; AS 73C; 10-17-000-001; AS1-71C; 10-17-000-002; AS1-71CR; 10-17-000-003; AS1-71CB; 10-17-000-004; AS1-71CBR; 10-17-000-005; AS2-71C; 10-17-000-006; AS2-71CR; 10-17-000-007; AS7-71C; 10-17-000-008; AS7-71CR; 10-17-000-009; AS3-71C; 10-17-000-010; AS3-71CR; 10-17-000-011; AS14-71C; 10-17-000-012; AS14-71CR

Offset downforce, VNK2A 251, 6-49Nm, Bosch Rexroth, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Tool holder 1/2" square 6-49Nm, Max. 1000rpm Maintenance free for 1 million full load cycles Rexroth No. 0608800633 For screw solutions Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Offset downforce, VNK2A 181, 6-49Nm, Bosch Rexroth, new, 0608800632, , As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Tool holder 1/2" square 6-49Nm, Max. 1000rpm Maintenance free for 1 million full load cycles Rexroth No. 0608800632 For screw solutions Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Delivery time immediately from stock! Motor three-phase current 400V with frequency converter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Band saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency converter Digital speed display Stepless belt speed Balanced intervertebral discs Hard rubberized treads Hardened and ground guide jaws LED task light Height-adjustable guide arm Machine colour RAL 7005 / RAL 7035 12-month warranty for single-shift operation

properties: Used telescopic belt conveyor Condition: fully functional with traces of use Ideal for fast material transport Expertly dismantled and packed Incl. feet Incl. control cabinet 4 pieces in stock Price per piece specifications: Manufacturer: Van der Lande Year of construction: 2013 Model: TTB-800- 4x16 Total length retracted: 5,550 mm Total length extended: 16.000mm Total width: 1.500mm (incl. control cabinet) Width: 1.220mm Belt width: 800mm Condition: good (used) Strap Type: Smooth / Black Conveying height: 1.100mm Net weight: 2.200mm Incl. rear counterweights. Two speed levels adjustable. Telescopic belt conveyors The telescopic belt conveyor is ideal in the picking zone to interlink machines or workstations and to optimize the internal process. During transport, the telescopic belt conveyor can convey sensitive containers, ...

The model M3 differs from the offered multi-blade and surround circuits by its solid and compact design, as well as by the simplicity in operation. Each individual machine element is able to withstand high workloads without risks while constantly utilizing the respective full engine power. Transport chain width mm 300 saw blade diameter mm 350 Min. cutting length mm 390 Feed speed m/min 6-48 Engine power PS 35 25,5 KW CONNECTED LOAD 58 AMPER The highest application security available on the market is achieved by SCM's exclusive system. The backfall protection of the workpiece and the protection against splinters during processing ensure maximum safety. Transport chain width mm 300 saw blade diameter mm 350 Min. cutting length mm 250 Feed speed infinitely variable rpm 6-48 Engine power kW (HP) 18,5 (25)

Gluing stand VHS with motor hydraulics for gluing all frame constructions with dowel connection – tine connection – 45° miter connection. The motor-hydraulic gluing stands VHS are available in the following sizes: Maximum grouting range 2,500 x 1,800 mm 2,500 x 2,100 mm 3,000 x 1,800 mm 3,000 x 2,100 mm 3,500 x 2,100 mm Three vertical press cylinders with a stroke range of 120 mm and a pressing force of 2 tons each. Two horizontal press cylinders with a stroke range of 120 mm and a pressing force of 2 tons each (optionally, the gluing stands can of course be supplied with more press cylinders). Drive power 0.75 to 1.25 kW.

Laser handheld spectrometer VULCAN for quick and easy chemical elemental analysis. Vulcan is one of the fastest metal analyzers on the market and is designed to last. It provides reliable material identification in just one second, based on laser-induced plasma spectrometry, without any X-rays. Whether for scrap sorting or PMI quality control, Vulcan always provides accurate and consistent material ID data. Significant increase in productivity An increased number of analyses per day makes all the difference, especially for extensive inventories. Low operating costs Because Vulcan is a laser device, employees do not need to attend expensive and time-consuming radiation training and certification training. Long-lived Vulcan is IP54 certified (equivalent to NEMA3) and meets military ruggedness standards (MIL-STD-810G). It also comes with a 3-year warranty. Proven It is ...

High quality - Low price! Radial drill MAS VR5A Arm 1600mm Max dia in steel 50mm Max dia in cast iron 60mm Max threading in steel M30 Max threading in cast iron M42 MT 4 Spindelmotor 4 kW - 28 - 2500 RPM Distance table-spindle nose 1600 mm Clamiping area 1800 x 1000 Weight 3,7 Ton

Planetary mixer Varimixer AR10 The AR series of beaters is the oldest by design and also the most durable series of beaters. The AR series is characterised by the fact that it has a mechanical belt transmission with simultaneous infinitely variable speed control.  The well-known robustness and powerful motor have been retained, and a number of characteristic features of the AR models have been improved without compromising the widely recognised quality. Technical data: Capacity: 10 litres, Adjustable speed: 53-294 rpm, Stainless steel mixing bowl, Stainless steel butterfly, Electrical power: 400 V - 0,37 kW. After general refurbishment. Call and arrange a demonstration of the machine!

With tool for 6 cups. Cup sizes: round 45 mm, height variable depending on weight requirements. Die size: round 53 mm, with pull tab. Dosage: volumetric, 6-cups, 10 to 20 g, weight adjustable. Product hopper approx. 50 litres. Capacity: 9,000 cups per hour depending on the consistency of the product.

Device type Mobile air purification device Make TEKA Type VIROLINE MAXI Supply voltage 1 x 230 volts Particulate pre-separator filter mat G4 Main filter Hepa filter H14 fan volume flow 1,500 m³/h Motor power 0.55 kW Mains frequency 50 Hz Design mobile air purification device Dimensions L x W x H 665 x 681 x 1,930 mm Noise level approx. 49 dB(A) Weight 167 kg Age 24 months Condition workshop-checked, like new Warranty 18 months from date of delivery Original price 2.720,00 € + VAT Complete price ex warehouse Munich 1.990,00 € + VAT The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, Germany Contact person is Mr. Manuel Maier. Of course, we ship the machine to you for 60, - € by forwarding agency throughout Germany. _____________________________________________________ ...

VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...

tool adaptor: VDI 40 weight: . kg material: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CATALOG NO. 6985 TECHNICAL DATA - max width of the workpiece 300mm - height of the workpiece 200mm - unit: corrugated rubber roller + shoe + metal roller - working table 1230x440mm - belt 300x1900mm in advance: - rubber roller, sliding - aggregate about 7.5 kW - sliding roller, rubber from down: - pulling tape - pneumatic oscillation - 2 types of feed speed - feed motor 0.85 kW - diameter of the exhaust connection 110mm - dimensions length/width/height 1250/1000/1950mm - weight 530 kg – unpainted – used grinder - very good condition Net price: PLN 13900 Net price: 3124EUR Net price calculated according to the exchange rate of 4.45 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Vollmer CHHF 21 H - Machine for single-sided grinding Year of construction: 1989 S/N 907 Make: Vollmer Germany in good working condition The technical data of the CHHF 21H at a glance: Circular saw blades Outer diameter 80 to 700 mm Bore diameter 20 to 105 mm Tooth pitch from 8 mm Hook angle up to 30° Radial clearance angle -7° to +3° Tangential clearance angle up to 5° Connected load approx. 0.52 kW Weight approx. 85 kg Dimensions: 70 x 50 x 80 cm Cisei8tfrg This machine has been specially designed for the repair of lack of carbide teeth. Newly inserted tips are used in the existing teeth. With this tabletop version, VOLLMER offers a a particularly economical, space-saving solution. The CHHF 21 H works according to the wet grinding process. During the grinding process, the grinding unit manually moved over the tooth flanks, with the saw blade Saw blade ...

Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

The onus screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 4500L Operating temp. : 25-35 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :65 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 1kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

KENYO VS80160 5-axis Machining center with CE Producer: Nanjing Kenyo Precision Machine Manufacture Co., Ltd YOM 2015 Simultaneously 5 axes Total Installed Capacity 22.4 kW 5-Axis vertical Milling machine for blanks up to 1000-1500kg Stroke X/Y/Z- 1600/800/800 mm Working table size 800x1800 mm Diameter of NC swivel table axle C 630 mm Rotating mass clamping force 4000 Nm Spindle clamping force: ≥ 2000 Nm Maximum mass load 2000 kg Spindle diameter 170 mm Spindle rotation angle- ± 110 Degree Tool Store Type BT40 ISO Tool magazine 24 pcs Maximum spindle rotation speed 10.000 rpm Spindle power 15 kW Ball-Screw pair HIWIN Spindle Hesheng Ball Bearings NSK Positioning accuracy ≤ X/Y/Z: 0.015 mm, C: 0.002 degree, B: 0.002 degree Repeat accuracy ≤ X/Y/Z- 0.01 mm, C:0.0015 Degree, B:0.0015 Degree Quick move: ≥ 10000 mm/min Milling speed: ≥ 1 to 8000 mm/min OC ...

Capacity: 1,500 K/h Types of boxes: Boxes of 6, 0.7 VdF, 200 x 300 x 320 mm, transverse Boxes of 6, 1.0 VdF, 200 x 300 x 320 mm, transverse Boxes of 12, 0.7 VdF, 355 x 270 x 310 mm, longitudinal running Boxes of 24, 0.2 goiter neck KK, 300 x 400 x 210 mm, longitudinal run Boxes of 24, 0.2 goiter neck SV, 300 x 400 x 210 mm, longitudinal run The following evaluations are integrated: crate geometry, foreign bodies, crate color, bottle height, bottle color + Box pusher VT-1201 Year of construction: 2016 Capacity: 1,500 K/h Box types: Boxes of 6, 0.7 VdF, 200 x 300 x 320 mm, cross run 6-boxes, 1.0 VdF, 200 x 300 x 320 mm, cross run Boxes of 12, 0.7 VdF, 355 x 270 x 310 mm, lengthwise run 24-boxes, 0.2 Kropfhals KK, 300 x 400 x 210 mm, longitudinal barrel 24-boxes, 0.2 goitre neck SV, 300 x 400 x 210 mm, longitudinal run The following evaluations are integrated: crate geo ...

ORDER NO. 7026 TECHNICAL SPECIFICATIONS - inlet width 740mm - inlet height 300mm - shaft width 780mm - shaft diameter 1000mm - knife length 780mm - number of knives 2pcs - sieve dimensions 55x55mm - 4 toothed pulling shafts from the bottom - lower shaft motor 5,5kW - 3 toothed pulling shafts from above - upper shaft motor 5,5kW - belt feeder - feed belt length 4300mm - feed belt width 600mm - belt feed motor 2,2kW - main engine 90kW - reverse gear, - autorewers - overall dimensions of the machine length / width / height 4600x2350x1700mm - overall dimensions of the feeder length / width / height 4550x980x970mm - total weight about 11000kg – German production, – used chipper, very good condition Net price: 295900 PLN Net price: 66494 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

Knives for bread slicers NEW

RADAX high-pressure duct fan High-pressure duct fan with cylindrical pipe sleeve, flanges on both sides, directly driven. Cylindrical galvanized steel tube Sheet metal, with double-sided moulded Flange, hole pattern according to DIN 24155, recessed built guide wheel. Semi-axial impeller, eight spatially connected curved blades made of thermoplastic, Balancing quality G 6.3 according to VDI 2060 and DIN ISO 1940. Three-phase squirrel-cage motor by Voltage reduction speed controllable, Thermal contacts, closed design, maintenance-free, sealed, low-noise Ball bearings with long-term lubrication. Fan data (default) Seawater version. Also resistant to weak acids and alkalis. NEW!

Key data: 1400 V, 1800 , 400

MWM Power Generator TBG620-V16K Gas generator set from 2001, Scope of delivery: base frame and generator, as shown. Without turbocharger, gas mixer, oil cooler and intercooler. Camshaft has signs of wear on the B side. 1 available 1,365 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2203156 Power [KW]: 1.400 Year of construction: 2001 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 0140886/06 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2001 Weight [kg]: 3.700

Key data: 1400 KW, 1800 kVA, 400 V

Gas generator set from 2004, Scope of delivery: Base frame and generator, as shown with missing parts – bushings defective. 1 available 1,800 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2205063 Power [KW]: 1.400 Year of construction: 2004 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 0166189/02 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2004 Weight [kg]: 3.700

MWM TCG 2020 V 16 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearing - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve plunger - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and other ...

MWM TCG 2020 V 20 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearings - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve tappets - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and othe ...

Load capacity: 2500 kg

Prati Vega Plus LF330 CNT Slitter / cutter / rewinder with inspection and label checking  Age: 2011  Unwinder  Rewinder  Slitting Unit  1 x Flexoprinting Unit - Varnish  UV Dryer  2 x Rotary Die-Cutting Unit  Sheeter  Perforation Unit  Cores: 25 mm, 40 mm, 45 mm, 50mm, 76 mm - wall thickness 3mm  Material width paper and film: min.: 150 mm / max.: 340 Print width: max. 310  Printing capacity: Punching only max. 200 m/min., printing max. 70 m/min.  max. roll Ø - down: 1000 mm / max. roll Ø - up: 400 mm Punching width: max. 320 mm  Slitter / cutter / rewinder with inspection and label checking.  Unwind with tension control and single edge guiding.  Pneumatic bars on the splice tables for changing rolls.  Color touch screen operation for all functions, programs and jobs.  For automatic non-stop rewinding (3-sp ...

1. HEAT CLEANING OVEN Cycle time : 2 - 4 hours Loading : Trolley, manual loading from the door side INTERNAL USEFUL DIMENSIONS Length : 1.870 mm Width : 1.460 mm Height : 1.500 mm (gross) 1.000 mm (net) Interior volume : 4,1 m³ Insulation : Ceramic wool + Rock wool Insulation thickness : 175 mm Maximum temperature : 1.260˚C Heating type : Direct heated Heating source : Natural Gas, LPG or Diesel Combustion chambers : 2 sets Burner capacity : 2 x 350.000 kcal/h Burner : RIELLO (Italy) Overheating control : Stainless steel water spray nozzles – 2 pc Safety control : Stainless steel water spray nozzles –4 pc Oven safety door : 1 set Electrical panel : PLC controlled, Schneider Electric branded switchgear components Control system : Touch screened panel and software system MATERIAL Oven body : Structural steel and sheet metal, spray pa ...

AGEING OVEN FOR ALUMINUM EXTRUSIONS The aging furnaces are used in the aluminium profile industry for the elimination of internal stresses of aluminum materials after extrusion and for hardening them. The ovens are custom designed as batch type with high speed ventilation and high efficiency in order to achieve needed hardness demand on the aluminum work pieces. Motion of the batches is done by a ground trolley or a ground conveyor system. The oven door could be an automatic guillotine type or manual hinged door. The whole process is PLC controlled, data logging option is an advantage during the operation. Electricity, liquid or gas fuel is used for heating the ovens. The ageing ovens are CE certificated and conforms to the European Norms.

CITIZEN CINCOM A20 VIPL CNC lathe built in 2006 ensures the highest precision and efficiency in the production process. During machining, the specially designed bed with its rigid structure and high thermal stability effectively reduces the heat impact, resulting in increased machine life and reliability. All of this, combined with a modular design with a reduced number of parts, makes the CINCOM A20 VIPL CNC lathe ideal for various types of production. Workpieces with a maximum diameter of 20 mm and a length of 135 mm are machined in 7 axes by a powerful main spindle which is synchronised with an AC motor, forming an electrospindle. A bushing driven by a separate AC motor is also synchronised with the machine’s main spindle. The operator’s panel consists of an intuitive FANUC 32i CNC controller, a memory card slot and an electronic wheel located next to the monitor designed to ch ...

ROTOFLEX VLI 330 INSPECTION – SLITTER – REWINDER Machine information: Rotoflex products are proven in practical applications with self-adhesive labels, processing, blister foils, and all kinds of paper. This professional and heavy duty die-cutter with slitter/rewinder and label checking will rewind rolls in a perfect register with a max. diameter of 700 mms and a max. width of 330 mms into smaller sized rolls. During the process, the labels can be checked for quality and missing labels. Specifications:  Max. web width: 330 mms  Roll diameter: unwind: 700 mms / rewind: 400 mms  Shaft diameter: unwind: 76 mms / rewind: 76 mms  Max. speed: 230 m/min.  Slitter  Rewinder  Splice table Description: unwind with splice tables and clamps, web guide and tension control (including automatic web holder at stopping procedure), pressure controlled die- ...

Prati - Vega Plus LF330 CNT Machine information: Prati converting products are proven in practical applications with selfadhesive labels, processing, blister foils, and all kinds of paper. This professional and heavy duty slitter/rewinder with missing label checking will rewind rolls on a full automated 3-spindle turret in a perfect register with a max. diameter of 1000 mms and a max. width of 330 mms into smaller sized Rolls. During the process, the labels can be checked for quality and missing Labels. Specifications:  Brand / type: Prati / Vega Plus LF330 CNT  Age : 2014  Min. / max. web width: 150 - 330 mms  Min. / max. paper weight: 90 - 160 gsm  Max. roll diameter unwind: 1000 mms  Max. roll diameter rewind: 400 mms (300 when in use with the 3 shaft turret)  Shaft diameter: unwind: 76 mms / rewind: 40, 50 and 76 mms (3 sets)  Max. speed:  ...

PRATI – VEGA PLUS LF330 CNT  Brand / model Prati / Vega Plus LF330 CNT (2008)  Type converting machinery  Year / SN 2008 / LF 020  HS Code 8441 1010 Description:  Slitter  Cutter  Rewinder with inspection and label checking.  Unwind with tension control and single edge guiding.  Pneumatic bars on the splice tables for changing rolls.  Color touch screen operation for all functions, programs and jobs.  For automatic non-stop rewinding (3-spindle turret) and cutting rolls (including 12 roll knives and a bar with 14 fixed knives) in register to smaller size rolls.  Waste suction removal.  During the process, the labels can be counted (numbers and meters) and checked for quality and missing labels with a missing label system.  Size Min. / max. web width: up 150 – 330 mms  Min. / max. paper weight: 90 – 16 ...

Used vertical wrapping machine by Ulma model VTC 700. New 2008. Vertical Fulfillment Wrapping Machine (VFFS) that forms a package with three seals. Designed for continuous packaging at high production speeds of up to 140 cycles/min. The VTC 700 machine is specially designed for continuous wrapping of many different types of products. The machine is extremely flexible in terms of changing the moulding size to allow for different portions and has the versatility to adapt to any type of film. Combine these features with the level of electronics specification and you have one of the most technologically advanced machines available on the market. Standard features: - Stainless steel version. - Servo-driven cross seal jaws (2 servo motors). - Servo driven film transport (2 servo motors). - Open front frame design. - Film spool holders with pneumatic wedges. - One-piece and eas ...