delta v used for sale

external dimensions (w x h x d):1500 x 1600 x 2500 mm useable dimensions (w x h x d):750 x 600 x 1100 mm temperature: 1200°C electrical heated: ca. 42 kW charge weight: 700 kg

Make:IHI, BBC Type: VTR 401 Two Inlet

E engine Three-phase asynchronous motor Manufacturer: VEM Model: K21R 315 MX4 Power: 160kw Supply: 400 V Revolutions: 1480/min Weight: 1000kg NEW, original box, unused from old stock for further details please refer to the pictures.

Make: FRIGOPOL Type: RHLL/Hr0017 Compressor types: 2x30L-DLYB-7.5 7.5HP Electrical power 1x14L-DLYB-4.5 4.5HP Electrical Power Refrigerant: R404A Cooling capacity Total: 42 to 50kW at -10C Electrical power 18.8kW Volume flow: 74m3/h Price on request

Grinder Rex vinkl

Very Good Condition Wartsila V32 Piston for Sale

Inner gear pump, internal toothed displacement pump chemical pump used Inner gear pumps are used to convey liquids of any viscosity. Also with abrasive dusts but without solid stake. e.B. oils, soaps, bitumen, tar, chocolate, molasses, cocoa butter, fat, glucose VARISCO/ ROTOTEC Type: V 85-2 SPG Flow rate at 190 rpm max approx. 15 m3/h Connections Inside approx. 100 Flange outside approx. 230 mm Gearmotor Lenze GST09-2M VBR 112C41 7.5 kW 190 rpm 400 V IP55 Dimensions: approx. 1400 x 400 x 470 mm All items are checked for function before delivery, if technically possible! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

lot of 6pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.10 SX02 or 10.12,5.10 A furnace for 20 sheets Usable area of 10 m² or 12 m² 6 oven total total area 60 m² or 72 m² - 120Bleche Oven is in very excellent condition, General and thorough overhauled and tested. Works like new. Very good steam. Secondary circuit for the baking Chamber. Turbo equipment. All maagnetic pump incl. daub thermal oil boiler plant including. 40 piece rack Sales including freight and installation Price on request

gas-fired preheating furnace type: KA_GB working temperature: 600°C max. allowed furnace chamber temperature: 750°C cennected load (el.): 2,5 kVA gas pressure: 60 mbar gas type: natural gas heating power: 130 kW (max. 150 kW) external dimensions (approx.) (w x h x d): 2000 x 3530 x 2500 mm useable dimensions (w x h x d): 1100 x 1330 x 1500 mm

Fuel pump, Vasa 32 Part no. 165180, PEO-G030E LOrange Part no: 165180

see pdf attached

High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

Sieve, vorsieb 3 deck, bar screen. Mogensen Stangensizer 3 floors. type: VM 2036 ruettler with 2 4.6kw 1000 rpm.

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

The pictured furnace is a circulation chamber furnace. The furnace drives under a nitrogen atmosphere and acts as a stabilizing furnace e.g. for copper alloys. Furthermore, the products are scanned by a scanner located outside the cabinet and for the various products different programs can be stored. The controller automatically performs, provided for the product program. usable dimensions (w x h X d): 1000 x 1400 x 1300 mm temperature: 300°C, +/- 2K heating power: 72 kW

1 x Alpha Technologies Mooney MV2000e Viscometer software discs and operation manual are included. You will have to register the software. PC not available. In good condition.

Load capacity up to 12,500 kg Gripper content of 0.5 m³ up to 5 m³ Make: various renowned manufacturers workshop testing 2015 Fully functional workshop overhaul and paint renewal upon request.

Ziehm Vision RFD 3D is the world's only 3D C-arm with flat-panel technology that provides a 16 cm edge length per scan volume combines 2D and 3D functionality to offer maximum intraoperative control. THE ULTIMATE C-ARM TO OUTPERFORM The treatment of cardiovascular and degenerative musculoskeletal conditions calls for high-performance intraoperative imaging technologies. Incorporating the latest CMOS technology for excellent image quality, the Ziehm Vision RFD is the ideal product. In addition to the cardiovascular-focused 20.5 cm x 20.5 cm flat-panel version, the Ziehm Vision RFD is available with a 31 cm x 31 cm CMOS flat-panel detector. This is the preferred model for highly demanding orthopedic, trauma or cardiovascular interventions that require more information in one image. Both systems are equipped with a powerful generator for optimum penetration, Advanced Active Cooling to e ...

KHS Seitz high vacuum filler for vicous products Type: Seitz wich with 12 filling valves solo machine complete recondizioned