delta v used for sale

R26115/18 VITS Impregnating- and coating machine model: IPA / S / II age: 1996 working width: max. 2200 mm, min. 625 mm available: immediately for finishfoil and edges heating thermal oil 250 ° dryer control 80 - 220 ° impregnating unit coating unit rewinding with thermal oil boiler material: decor paper and similar papers 30 - 240 g/m² Available: sofort

R25532/08W Cosmos Vega folder gluer model: 145 age: 2003, full overhauled 2010 available: immediately for corrugated board Available: sofort

R26081/12 Jagenberg rewinder model: VII age: 1963 size: 1600 mm available: immediately material: paper and foil sleeve inner diameter:70 mm speedt: max. 500 m/min about 10 knives Available: sofort

AGFA Apogee Print Drive Series 3 VLF with Open Connect. The Open Connect Option is activated in the Dongle. Consisting of: CD and latest Update, Dongle, APIS-Card and APIS-Adapter Available: now

4-color R21046/16 EDELMANN continuous stationery press model: Varioprint age: 1994 web width: 52 cm 4 printing units reel – to - reel slide-in: 4 x 16 2/3 4 x 12 3 x 16 unwinder/ rewinder: 120 cm revolving slide-in in all 4 printing units SCHOBER double tool BST colour monitor Available: nach Absprache

AGFA Apogee Print Drive Series 3 VLF with Open Connect. The Open Connect Option is activated in the Dongle. Consisting of: CD and latest Update, Dongle, APIS-Card and APIS-Adapter Available: now

AGFA AccuSet 800 in great condition with Agfa Viper Rip, Resolution: 1200, 1800 and 2400 dpi - System includes all componentes: Accuset, Supply- & Takeup-Cassette, Apis-Cable, CDs, Software and Dongle. Including Techkon Densitometer for film. Just send us a mail and you will get more info and photos Available: now

AGFA Apogee Viper PDF-Rip including Dongle, CDs, APIS-Board and APIS-Adapter Available: now

AGFA Viper 1.9 Software-Rip including Dongle, CDs, APIS-Board and APIS-Adapter Available: now

Technical data: maximum sheet width: 3000 mm maximum plate thickness at maximum yield of 240 N / mm² on bending: 35 mm On bending length: 2,2 x S Diameter of roller upper roller: 552 mm Bottom roll: 532,4 mm Side rolls: 400 mm

Concentrate evaporator - unused- This evaporator consists of 3 parts, which switched in series are: -Evaporator (58 pipes) -Capacitor (19 tubes) -Capacitor (48 tubes) Expiration: 32% concentrated Cheese Whey comes in a dry work of a cheese dairy. This vaporizer is the final link in the chain of drying and provides a high concentration in the final product by removing the remaining water in the dryer and creating protein powder. The falling film evaporators can be visited at any time! Since it is still unused, it is in top condition!

VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg G & BAR-BV-1 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78

S13 - used approx. 10 m³ / 10,000 litres underground tank, steel tank, firefighting water tank, cistern. technical details: capacity: approx. 10 m³ / 10,000 litres material: steel tank weight: approx. 3 tons dimensions: approx. Ø 1.6 m x 5.20 m Used steel tank in good condition, coated in bituminous insulation or bitumen paint, underground storage tank, lid and connections on the top. The tank has been emptied and professionally cleaned inside. According to the age traces of use are present. It is in good condition, yet slight insulation damage caused by transport or the excavation may be present on the outside. This container can be used as a storage tank for water and many different media. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it  ...

Capacity: 2500 ton Slider stroke: 190 mm Size of a working course of slider before its extreme bottom position corresponding nominal capacity: 4.5 mm Number of slider courses per minute: 20 Maximum distance between table and slider (in lower position of slider): 800 mm Distance adjustment between table and slider: 20 mm Table overall dimensions: - from front to rear: 1400 mm - from left to right: 1250 mm Thickness of a under-forginig plate: 230 mm Hole diameter in a table: 125 mm The size of a slider in front - back: 900 mm Lower eliminator stroke length: 190 mm force of the bottom pusher: 75 ton Distance between railings: 950 mm Course of a pusher in a slider: 15 mm Capacity of a pusher in a slider: 25 ton Admissible number of starts per minute: 10 Machine overall dimensions - length: 3910 mm - width: 3920 mm - height: 6220 mm Press weight: 97715 kg

Hydraulic unit incl. wiring diagram Manufacturer: Aros Hydraulik GmbH Type: HE160-Z21/V5, 5-VAD22/V5, 5-B3/120-LV6P-so. Engines: Manufacturer: Asea motor Type: MBT 132s Power: 5.5 kW Frequency: 3 ~ / 50 Hz Manufacturer: Dietz-motoren GmbH & co. KG Type: 4001540 441883 Power: 5.5 kW Voltage: 380 V Current strength: 11,8 A Valve block: Manufacturer: Lenze Type: 14 128 10 1 0 S 0 Pump: Manufacturer: Sauer / Daikin Type: J V15SA4CRX85 Maximum pressure: 250 bar Filter: Manufacturer: Argo filter Type: HD 046 056 Capacity: 35 l / min Pressure: 210 bar max. New price: approx. 7900

Picker Rad View--Tomo with the following device components: generator Rad View 65 tube Dunlee DU 304 C004-30 0,6/1,2_year of manufacture 2004 vertical stand Pausch • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

Technical data: Nominal power 600 kg/h Power: Drive engine 0.75 (1.02) kW (hp) Brush cleaning 0.37 (0.5) kW (hp) High-pressure cleaner 4.7 (6.4) kW (hp) Electric connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 825 mm Width 1 085 mm Height 1 290 mm Discard or drop-in height 1 290 mm Bandwidth 420 mm Order width 300 mm Order height 10-50 mm Weight (ribbon press) 550 kg Material 1,4301/AISI 304 Juice yield 70% Ribbon speed (infinite) 2.1-5.5 m/min Transcourse time 0.4-1 min Water connection at least G 1/2, "min 12 l/min Height juice drain 305 mm Height Trester ejection 780 mm Can be used for nuclear and stone fruits Included high pressure cleaner, compressor

Eccentric screw pump Manufacturer: Pumpenfabrik Wangen GmbH Type: 50 ST - V2A Serial number: 53-651 Material: V2A Flow rate: 10 m ³/h Operating pressure: 4 bar Revolutions: 470 RPM In very good condition!

2,57:1

2,91:1

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

4 pieces same batteries 24 V

Compressor Bitzer 4FE-28Y-40P

Compressor Bitzer 6JE-33Y-40P

used plants - full, used plants - EBAWE, used plants - SUMMER, used plants - WECKENMANN,

used vertical tool presetting device in very good condition, ready to use Recording: SK 50 max. tool length: 460mm max. tool diameter: 400mm Optics: 20x optical magnification Energy supply: Current: 220Volt 50 HZ luminous flux connection Pneumatics: 6 bar air pressure connection Machine space requirement: (w x t x h) approx. 1400 x 800 x 1700mm (without operator and service environment) Accessories / Optional equipment: â?¢ Machine cabinet with compartment â?¢ Calibration mandrel / reference mandrel â?¢ Adapter holder Iso 50 to Iso 40 for SK 40 tools Bdujvng8ha â?¢ Adapter holder Iso 50 to VDI 30 â?¢ Adapter holder Iso 50 to VDI 20 â?¢ Adapter holder Iso 50 on special tool holder â?¢ Additional measuring clock holder â?¢ Tool positioning device to 4 x 90° â?¢ Operatin ...

Cylinder head, Vasa 32 Low Nox Including valves, springs and rotocaps Part no: 120055

E - engine of Exhaustor 3 x 380 volts.

Make: BITZER Type: 6H-35.2 Conveyor volume: 110.5 m3/h Speed: 1450 rpm New Price on request

Make: BITZER Type: 6F-40.2 Y Conveyor volume: 151.6 m3/h Speed: 1450 rpm Price on request

Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 140 tons

Manufacturer: Verpama Switzerland origin: Switzerland Dimensions: 9.0 x 0.55 white Verpama order number: 265

Qty. 1 Second-hand paper mill Mfc.: Valmet , METSO, Voith, Honeywell, Siemens, Ahlström Sulzer, Clark & Vicario, Andritz, Alfa Laval, GL & V Hedemora, Beloit, Tampella, Built: 1971 Rebuild: 1990 & 2004 Product: Uncoated magazine paper Production capacity: 290 000 tonnes Basic weight range: 44 – 57 g/m2 Width: 8.35 m Speed: 1500 m/min Raw materials: groundwood pulp, thermomechanical pulp, chemical pulp and fillers Headbox Mfc.: Valmet Type: OptiFlo 2 with dilution profiling (2004) Wire section Mfc.: Valmet Type: OptiFormer LB (loadable blades) (2004) Press section Mfc.: Valmet Type: SymPress B with 4th press (1990/2004) – shoe press in 3rd nip (2004) Drying section Mfc.: Valmet Type: SymDry (1990) – 4 single tier drying groups 2 double tier drying groups – ropeless tail threading (1990/2004) Max designed structural speed of parts rebu ...

Belts - oil separators Oil separator with KUNSTSTOFFGURT OPV - 1 / OPV - 2 This group of oil separators is recommended for industrial applications. The collection in the standard version is made of plastic without connecting traces, which is adapted to the requirements, e.g. polymer, elastomer, etc. All parameters such as performance, bandwidth, and so on are selected individually. An oil lifting height of up to 15 m is particularly useful in deep tanks, e.g. sewage treatment plants. The number after the marking (300/500/700/1000 mm) is the working length of the strip - depth from the mounting base. Complete oil separator with PU polyurethane tape. Belt color: green (standard), blue or white. Maximum liquid temperature up to 60°C. We have oil separators with a stainless steel belt INOX with a working temperature of up to 100 ° C at an additional cost. Maximum liquid temperature ...

Used stainless steel coating pan made in Hungary by Vegyepszer. Drum volume 200 liters. Unit includes air fan. Drum dimentions diameter 1.1 m depth 45 cm.

Make: BITZER Type: 6G-30.2Y-40P Conveyor volume: 126.8 m3/h Speed: 1450 rpm Price on request

Make: BITZER Type: S4G-12.2-40P Funding volume: 42.3 m3/h Built year: 1997 with 3 compressors for freezing Two-stage Price on request

The oil separator is used to collect oil floating on the surface. It is used wherever there is little working space and fluids must be moved and de-oiled in different places. It is a lightweight, compact portable device that is mounted on the wall of the in which the liquid to be cleaned is located. Thanks to this, it is possible to develop various technological active ingredients in de-oiled in different places. The device is designed for continuous operation. The disc is made of self-adhesive plastic, on which oil and carbohydrates, but water does not. Maximum liquid temperature up to 60 ° C - standard band. Maximum motor and housing temperature up to 40°C. Avoid mounting places with aggressive pH - additional motor protection required. With the OTV-300, you should take a 15-minute break every 3 hours. If the motor does not overheat, it can work longer. Continuous opera ...

Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg

Make: BITZER Type: S4G-12.2-40P Funding volume: 42.3 m3/h Built year: 1997 with 3 compressors for freezing Two-stage with switch box Price on request

Ready to ship

Electrically heated chamber furnace, make VEI type: KA_EB_TO external dimensions (w x h X d): 2500 x 2900 x 1700 mm usable dimensions (w x h X d): 1250 x 2000 x 1250 mm temperature: 250 ° C heating power: 24 kW

Ready to ship

Wire stitching machine VEB LEIPZIG P 66 Built in 1972 Machine No.: 66.72.126 1 staple head Functional The machine can be demonstrated in our warehouse - please make an appointment. Wire Stitching Machine VEB LEIPZIG P 66 1972 In 1972 Serial: 66.72.126 1 stitching head working condition Test is possible in our stock – just make an appointment. ••••••••••• The machine is available in the warehouse and can be tested. Test in our stock is possible. The machine can be visited in the warehouse. Can be visited in our stock. Only to commercial buyers with proof. Purchase only available for commercial customers with proof Sale without warranty and warranty. No return accepted. The machine is sold as it goes and stands. We sell the machine "as is", no warrenty, no guaranty. We don't take the goods back.  ...

Gas furnace, make VEI type: KA_GB_TO external dimensions (w x h x d): 3000 x 3700 x 2300 mm interior dimensions (w x h x d): 1500 x 2200 x 1500 mm temperature: 300 ° C loading weight: max. 2500 kg circulation fans: 2 x 4,0 kW = 8 kW heating power: 120 kW

Gas-fired continuous furnace, make VEI type: DLO_GB heated length: 4000 mm conveyor belt width: 900 mm emperature: max. 950 ° C

Gas heated tempering furnace, make VEI type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C circulation fan: 4,0 kW loading weight: 3.000 kg gross

Crucible melting furnace, make VEI type: SO_EB_BU Temperature: 300°C - 1250°C

Shaft furnace,make VEI type: SCO_EB height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C