delta v used for sale

General SKU327X692 LocationBarneveld CEcheck MakeQVF Glasstechnik Main Features MaterialGlass Volume150 Ltr. Specified Features - Vertical tank Closed vertical tankcheck Capacity150 l. Vessel sizesø 450 x 1300 mm Dished topcheck Dished bottomcheck Top connectionscheck Outletcheck MaterialBorosilicate Glass 3.3 Information Type150 l No.VZN 150/450 Mounted on legscheck on frame Floorspace0,80 x 0,70 m Weight400 kgVertical tanksQVF GlasstechnikTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

THERMO HAAKE Viscotester 550 Viscometer with PK 100 D Plate-Cone Measuring System Speed Range: 0.5 to 800 min-1 Uncertainty: ± 0.1% CD Mode: < 0.5% min-1 Torque Range (Ncm) up to 400 min-1: 0.01 to 3 Torque Range (Ncm) up to 800 min-1: 0.01 to 2 Uncertainty: ± 0.5% SDF Temperature range: 50 to +250 °C Power supply: 230/115 V (50/60 Hz) With measuring tank for coaxial cylindrical geometry With measuring unit PK 100D with multiple sensors The MV 3 st mobile is slightly damaged Viscotester 550: Typ002-7026 Haake PK 100 D: Typ002-2089

240V, 50HZ, 0.75KW, 2.8A, 1420RPM FACTORY F40

table size: 3000mm x 1500mm; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 425kg;

table size: 3000mm x 1500mm; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 480kg;

General: Max. workpiece diameter: 140 mm Chuck diameter: 250 mm Max. turning length: 700 mm Gauge I: Tool carrier I: Tool turret (X/Z) Tool drive: 9,600 rpm, 44 Nm Tool holder: BMT Number of stations: 11 + 1 part gripper X-axis: 310 mm Z-axis: 1,115 mm Displacement measuring systems (X/Z): Direct (glass scales) Sub-spindle (OP20): motor spindle Speed: 5,000 rpm Power: 33.9 kW Torque: 231 Nm Lining: 2+2 jaw power chuck Clamping Cylinder: Full Clamping Cylinder, Hydraulic C-axis: 0.01° Gauge III: Tool carrier II: Tool turret (X/Y/Z) Tool drive: 9,600 rpm, 44 Nm Tool holder: BMT Number of stations: 11 + 1 part gripper X-axis: 620 mm Y-axis: 50 mm (+ 22/ - 28 mm) Z-axis: 1,115 mm Displacement measuring systems (X/Z): Direct (glass scales) Gauge IV: Main spindle (OP30): Movable motor spindle Speed: 5,000 rpm Power: 33.9 kW Torque: 231 Nm Lining: Co ...

S/s vibration gutter with wire mesh, mesh width: 470 mm, total dimensions: 1750 mm x 800 mm x 1400 mm.

Key data: 750 mm, 400 mm, 500 mm

Inv. Num. : 8792 Type: Mikron VCE 750 Producer: HAAS Created: 1997 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 350 mm Maximum vertical spindle speed: 7500 1/min X-axis travel: 750 mm Y-axis travel: 400 mm Travel Z axis: 500 mm Cone: SK 40 Number of all tools: 20 pieces Equipment: 4. Axis 2023: Replacement of the manual gearbox of the tool changer Replacement of the tool plate magazine

General SKU035F151 MakeKoruma Maschinenbau KG Neuenburg TypeDisho V.100/45 Pharma No.2996 Year of construction1982 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume45 Ltr. Motor6 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity45 Ltr. Vessel sizesø 420 x 400 mm Conical bottomcheck With covercheck Top connectionscheck With jacketcheck With gate type stirrercheck Motor0,26 kW, 400 V Speed mixing shaft28 rpm With homogeniserø 100mm Motorhomogeniser ± 4,9/6,0 kW MaterialStainless steel 1.4571 (316Ti) Information LocationBarneveld With switchcheck Floorspace1,5x0,7 m Total height1,7 m Weight300 kg Extra SpecificationsMixing, dispersing and homogenising unit, ø 100 mm: with vacuum pump, 0.75 kWProcessing vesselsNew arrivalsFryma KorumaProcessing vessels > Pro ...

General SKU327X695 LocationBarneveld CEcheck MakeQVF Glasstechnik Main Features MaterialGlass Volume150 Ltr. Specified Features - Vertical tank MaterialBorosilicate Glass 3.3 Closed vertical tankcheck 2x Capacity2x 150 l. Vessel sizesø 700 x 800 mm Top connectionsDN25, DN40 OutletDN25 Information TypeR409/454 No.M702-723865 Mounted on legscheck in frame Floorspace1,90 x 1,00 m Total height2,20 m Weight500 kg Extra SpecificationsQVF Glass Receiver System – 2 × 150 L Receiver Flasks with Coil Heat Exchanger (Condenser/Cooler)Vertical tanksNew arrivalsQVF GlasstechnikTanks > Vertical tanksNew arrivalsBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit u ...

General SKU262M292 MakeOnbekend, typeplaat ontbreekt Mounted on legscheck Main Features MaterialStainless steel Volume150 Ltr. Motor0.65 KW Specified Features - Stirring vessel Closed stirring vessel(1x) Capacity150 Ltr Vessel sizesdia. 500x800mm Dished bottomcheck Dished top sidecheck Manhole/handgat dia. 150mm Top connections2x dia. 25mm Outletdia. 25mm With propellor stirrercheck Motor0,65 KW, 230/400 Volt MaterialStainless steel 1.4571 (316Ti) Information LocationBarneveld Floorspace0,7x0,7 M Total height1,9 M Weight220 KGStirring vessels-Stirring vessels > Stirring vesselsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Vertical Machining Center MIKRON VCE1200+

General SKU268N282 LocationBarneveld MakeWilhelm Schmidt TypeGEX 1000 No.93.0126 Pressure Working pressure1 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1080 Ltr. Pressure1 Bar Specified Features - Pressure vessel MaterialStainless steel Capacity1080 Ltr Vessel sizesdia. 800mm x2300mm Max. temperature-60/50 degr.C. Information Year of construction2007 Floorspace2,9 x 0,9 M Total height0,9 M Weight300 KGPressure vesselsWilhelm SchmidtTanks > Pressure vesselsBrand > Wilhelm Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU409X1229 MakeNetzsch LocationBarneveld CEcheck TypeStativrührer Main Features MaterialStainless steel Volume43 Ltr. Motor1.1 KW Specified Features - Stirring vessel MaterialStainless steel 1.4306 (304L) Open stirring vesselcheck Capacity43 Ltr. Vessel sizesø 300 x 600 mm Conical bottomcheck Flat top sidecheck With covercheck Outletø 30 mm With turbo stirrercheck With dissolver stirrercheck Motor1,1 kW (Ex) Speed mixing shaft1000 rpm Information No.2800170-11 Year of construction2016 Mounted on legscheck Floorspace1,1 x 1 m Total height2,3 m Weight400 kg ATEX compatiblecheck Extra SpecificationsWe have the bottom disk for this one in the box of the Netzsch rs 2/PM is informed, guess spacer is a problem to install : easy / BRFStirring vesselsNetzschStirring vessels > Stirring vesselsBrand > Netzsch What you can expect from Foeth: -- Machine is ...

General SKU268N283 MakeWilhelm Schmidt TypeGEV 1000 No.94.0119 Year of construction2006 LocationBarneveld Pressure Working pressure1 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1120 Ltr. Pressure1 Bar Specified Features - Pressure vessel MaterialStainless steel Capacity1120 Ltr Vessel sizesdia. 1200mm x1300 mm Dished topcheck Dished bottomcheck Max. temperature-60/50 degr.C. Information Floorspace2,6 x 1,4 M Total height1,8 M Weight400 KG Extra Specificationswith collectbinPressure vesselsWilhelm SchmidtTanks > Pressure vesselsBrand > Wilhelm Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...

General SKU268N301 MakeWilhelm Schmidt TypeGEX 1000 No.93.0127 Year of construction2007 LocationBarneveld Pressure Working pressure1 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1080 Ltr. Pressure1 Bar Specified Features - Pressure vessel MaterialStainless steel Capacity1080 Ltr Vessel sizesdia.800 x 2300 mm Dished topcheck Dished bottomcheck Max. temperature-60/50 °C Information Floorspace2,9 x 0,9 M Total height0,9 M Weight300 KGPressure vesselsWilhelm SchmidtTanks > Pressure vesselsBrand > Wilhelm Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Casemaker DE Pack QYKM-1400x2900, Year 2023, Max.Size: 1400x2600 mm, Skip feeding area: 2180x4000 mm, Min.Size: 350x750 mm, Max.Speed: 200 pcs/min., 4 Color Flexo, Rotary Diecutting, vibration, Stacker

Bobst SPO 1575 + 2 Color Flexo Printing Unit, Jahr 1994, Max.Size: 1575x1075 mm, Min.Size: 600x400 mm, Max.Speed: 4500 Sh/h, Max.Cutting force: 350 t, Flexo Printing Unit year 1974

Martin Miniline 616, - Vacuum feeders, - Max.Speed: 24,000 Sh/h, - Max.Size: 600x1600 mm, - Year 1974/1991, - 2 Color Flexo, - Slotter, - Rotary die cutting, - Folding gluing, - Counter Ejector, Year 1991

MHI Singlefacer Model 50C, Size: 2500 mm, Max. Working Press: 200 psi, Year: 1984, C-Flute = overhould, in Production

hogedrukkoeling via de spindel spanentransporteur X-axis: 1660 mm Y-axis: 510 mm Z-axis: 510 mm Table dimensions: 2000 x 510 mm Max weight on the table: 1000 kg Admission in spindle (ISO): BT-40 Power on the spindle: 18,5 kW Control : Mazatrol 640M Toolchanger: yes Number of toolholders: 30 positions Number of rotations: 12 000 rpm Weight: 8250 kg

General SKU040Z162 MakeBrogli AG Allschwill TypeMH-2000 No.2931 Year of construction1989 LocationBarneveld Pressure Working pressure0.5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume2000 Ltr. Motor21 KW Specified Features - Processing vessel MaterialStainless steel 1.4301 (304) Open stirring vesselVacuum processing vessel (1x) Capacity2000 Ltr Vessel sizesdia. 1530x1100mm, Vessel WITHOUT jacket Dished bottomcheck Flat top sidewith mechanic lifting (2,2 LW, 380 Volt) With covercheck Outletdia. 90mm With anchor stirrerscraper stirrer Motor8,5/12,0 KW, 380 Volt With homogeniser(± 750/1500 Rpm) Motor18,0/21,0 KW Information With switchgearcheck Floorspace3,8x2,0 M Total height2,9 M Weight7000 KG Extra Specifications- Equipped with 2 spiral stirrers (Helix) -- RECONDITIONED -- Technical specs Extra informationVessel without jacket Pro ...

General SKU273K305 MakeHaagen & Rinau Mischtechnik Bremen TypeSRC-200 No.8233751 Year of construction1987 LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume345 Ltr. Motor6 KW Specified Features - Processing vessel MaterialStainless steel 1.4301 (304) Closed stirring vesselVacuum processing vessel (1x) Capacity345 Ltr (useful capacity 50-200 Ltr) Vessel sizesdia. 740x550mm Dished bottomcheck Dished top sidecheck With covercheck With jacket(32,5 Ltr) Max. temperature143/151 Degr. C. (vessel/jacket) With anchor stirrerscraper stirrer (Teflon scrapers missing) Motor5,5 KW, 220/380 Volt Speed mixing shaftvariable With homogenisercheck Motor1,5/6,0 KW, 380 Volt Information Floorspace2,2 x 1,2 M Total height2,9 M Weight1800 KG Extra Specifications- With vacuum pump mak ...

Digital Microscope Controller for VHX-7000 Series Console for VHX-7000 Camera Unit High Performance Camera VHX 7020 Tripod (motorized in XYZ 100mm) VH Zoom Lens 20x-200x Tripod adapter for VH-Z20 Polarization adapter for VH-Z20 3D Measurement Software for VHX-7000 Bracket for VHX-S770E/750E Viewing by telef. Arrangement possible used, bought as seen, without warranty Price = 53000.00 € + VAT Invoice due upon readiness for shipment or delivery

turning diameter:200 mm swing diameter:260 mm turning height:200 mm Tool table:1054 x 400 mm Dimensions (L/W/H):2200 x 2300 x 2300 mm weight:3300 kg slide travel radial ( X-axis ):520 mm slide travel axial ( Z-axis ):200 mm no pallet circulating belt, no C-axis, no driven tools

turning diameter:250 mm swing diameter:250 mm turning height:200 mm total power requirement:37,7 kW chuck diameter:315 mm spindle speed max.:5500 1/min travel -x axis:625 mm travel -y axis:+100/-80 mm travel -z axis:250 mm worktool system:VDI 30+40 weight of the machine ca.:8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining.

faceplate diameter:800 mm power requirement:110 kW weight of the machine ca.:37.000 / total 52.000 t transport measurements machine:5,07 x 2,98 x 3,90 m clamping diameter:800 mm :Ø 800 x 720 mm Tool bore:Capto C6 tools in tool magazin:2 x 80 With C-Axis

faceplate diameter:1600 mm power requirement:80 kW weight of the machine ca.:25 t dimensions of the machine ca.:4,4 x 4,62 m max. workpiece diameter:2000 mm max. diameter of face turning:1800 mm tool taper:ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis

faceplate diameter:1400 mm swing diameter:2000 mm turning height:1500 mm main drive:80 kW faceplate speeds from - to:1 - 365 U/min milling motor:37 kW ram head dimension:240 x 240 mm max. ram stroke:1250 mm total power requirement:133 kVA weight of the machine ca.:50 t dimensions of the machine ca.:11 x 5 x 6,4 m Machine was overhauled in 2008 by OEM New control CNC SIEMENS 840 D automatic tool changer 72-pcs C-axis with driven tools Angle-, straight tool holders with CAPTO holder Coolant device Chipconveyour

x-travel:1660 mm y-travel:760 mm z-travel:660 mm weight of the machine ca.:8700 t dimensions of the machine ca.:4.320 x 3.380 mm distance spindlenose - table min./max.:808 mm distance work spindle /surface of the table:155 - 815 mm Machine height:2850 mm floor space required (w/o switchgear cabinet):4.320 x 3.380 mm spindle motor:11 (10 Minuten) /7,5 (30 Minuten)/ 5,5 (Dauerbetrieb) kW tool taper:SK 40 Spindle RPM:40 - 7.000 (Standard ) / 40 - 10.000 ( Option ) 1/min surface area:2.000 x 760 mm max. table load:1.000 kg feeds X-axis:1 - 5.000 mm/min rapid traverse X-axis:24.000 m/min rapid traverse Y-axis:24.000 feeds Y-axis:1 - 5.000 mm/min feeds Z-axis:1 - 5.000 mm/min rapid traverse Z-axis:20.000 m/min

x-travel:600 mm y-travel:410 mm z-travel:520 mm tool change unit:16 turning speeds:8000 1/min control:SIEMENS 810 shopmill table surface area:840 x 420 mm rapid traverse X- and Y-axis:36 m/min rapid traverse Z-axis:20 m/min taper ISO:SK 40 spindle drive:15 kW weight of the machine ca.:2,5 t space requirements approx. LxWxH:2,2 x 2,3 x 2,3 m vertical machining center, el. handwheel, no chipconveyor, approx. h "machine on", approx. h "spindle on"

x-travel:1270 mm y-travel:660 mm z-travel:610 mm table surface area:1500 x 660 mm table load:1,3 t control:ULTIMAX 4 turning speeds:10000 1/min spindle:15 kW Tool bore:SK 40 rapid traverse:X/Y/Z 30/30/20 m/min tool change unit:24 Pos. total power requirement:30 kVA weight of the machine ca.:9,5 t dimensions of the machine ca.:4,8 x 4,56 x 2,95 m vertical machining center, el. handwheel, chipconveyor,

faceplate diameter:2000 mm swing diameter:2130 mm turning height:1400 mm ram stroke range:1000 mm workpiece weight:10 t faceplate turning speed range:1 -200 U/min main drive:60 kW total power requirement:95 kW weight of the machine ca.:24 t dimensions of the machine ca.:6,0 x 4,0 x 5,6 m with CNC SIEMENS 840 D C-axis driven tooling 15/22 kW automatic toolchnager 16-pockets through spindle coolant splash guarding and chip conveyor

faceplate diameter:1800 mm swing diameter:2000 mm turning height:1170 mm z-axis:1000 mm cross rail adjustment - vertical:800 mm faceplate speeds::2,5 - 280 workpiece weight:12 t feeds:1 - 6000 mm/min max. torque on the faceplate:50000 Nm total power requirement:85 kW weight of the machine ca.:41 t dimensions of the machine ca.:5,6 x 4,8 x 4,6 m Machine retrofit and overhould in 2005 with SIEMENS 840 D powerline control - 6 jaw hydraulic power chuck - tool changer for 12 tools - chip conveyor, coolant attachment, splash housing - various tool holders

faceplate diameter:1000 mm swing diameter:1600 mm turning height:1200 mm main drive:75 kW faceplate speeds from - to:7 - 800 U/min milling motor:25 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:800 mm ram head dimension:240 x 240 mm weight of the machine ca.:40 to dimensions of the machine ca.:9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor

faceplate diameter:1400 mm swing diameter:2000 mm turning height:1270 mm main drive:80 kW faceplate speeds from - to:1 - 355 U/min max. workpiece weight:6.000 kg milling motor:37 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:800 (8 x 100 mm) mm ram head dimension:240 x 240 mm max. ram stroke:1250 mm weight of the machine ca.:50 to total power requirement:133 kVA dimensions of the machine ca.:11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories

Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Weld-on part with VTN / Martin old small mount, Dimensions of the mount:, Bolt diameter: 50 mm, Handle/mounting width: 190 mm, Bolt spacing [center - locking plate]: 320 mm

Troughfeed boring machine Make: VITAP Type: ACOUSTIC For creation of acoustic panels for noise reduction Boring machine with through feed panel, boring from the bottom and automatic panel return to the operator. Three controlled axes: - X Axis - Panel movement by means of a strong pneumatic clamp - Y Axis - Boring head movement - Z Axis - Panel boring - Newly patented, high rigidity boring head movement on Y and Z axis. - Constant Side pusher: Side pusher with constant preload for perfect positioning of the panel on the machine zero point. - New frontal and more user friendly tool change system No limit in panel length High productivity and flexibility - The drilling head processes several holes at the same time - Different grids are possible also drilling grids with shift - Different drilling heads are optional available Easy TPA programming - Control: F ...

CNC boring- routering machine Brand: Vitap Type: K3 New machine Throughfeed process from the bottom and automatic panel return to the operator. Develop a new individual class: - With this machine you can do grooves and drill processings as well as different milling works, from simple edge milling to the milling of forms and letters. - There are no limits for your creativity Easy beginn with CNC programming: - TPA makes it easy: drillings, grooves, linear millings, form millings or the millings of letters - The CAD Software shows the processings on a virtual workpiece - Good overview about all processings on the single sides of the workpieces - Mirror function for parallel processings on other positions - Choose reference points via entering the exact position or just via click on the virtual workpiece Vitap Bar Nesting - efficient and time saving - This patent ...

Contour edge banding & trimming machine Make: VITAP Type: SMART-3 New machine - With swivable trimming station - For straight and formed workpieces (convex and concave) - 1 glue spreading roller for 10-60 mm panel thickness - Guillotine to cut bands up to 3 mm thickness - edge 0,5-3mm 2 tape feeding speed (3 m/min or 7 m/min) -Glue pot 1kg capacity - Tape plate Ø=520mm Solid Phenolic table - Easy to clean - With no heat transmission - Electronic temperature control - Foot pedal command for the guillotine Tilting trimming unit - with 1 high frequency motor HP 0.75 (kw0,55) - 1 cutter Head with 2 knives r1mm/r2mm/r3mm - Support tape plate Ø 600 mm - Semi-automatic end-cutter with motor 0,5 kw and blade Ø=125 mm - Working table 400 x 300 mm. - CE standards. Optional available for an extra charge: - Cutter (without knives) - Set ...

EMAG VTC 250 DUO DDYear of manuf. : 2020 Control : Siemens 840 Dsl Turning diam. : 140 mmTurning length : 700 mm____________Description:In General:Max. workpiece diameter:140 mmChuck diameter:250 mmMax. turning length:700 mmTrack I:Tool carrier I:Tool turret (X/Z)Tool drive:9,600 rpm, 44 NmTool holder:BMTNumber of stations:11 + 1 Part gripperX-axis:310 mmZ-axis:1,115 mmPosition sensors (X/Z):Direct scalesTrack II:Main spindle (OP10):Travelling direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:Collet chuckClamping cylinder:Hydraulic clamping cylinderSupport control:PneumaticW-axis:772 mmC-axis:0.01°Position sensor (W):Direct scale:Sub-spindle (OP20):Direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:2+2-jaw power chuckClamping cylinder:Hydraulic clamping cylinderC-axis:0.01°Track III:Tool Carrier II:Tool turret (X/Y/Z)Tool drive:9,600 rpm, 44 N ...

<br>AGFA Apogee Print-Drive Series 3 VLF with Inkdrive, DQS and TIFF output. The Optionc Inkdrive (ZIP3), DQS, and TIFF output are enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

<br>AGFA Apogee Print-Drive Series 3 VLF connect to open. Open is Connect enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

Nitrogen generators membrane or PSA systems for laboratory up to production (500 L/h to several m3/h) No more gas cylinders in laboratory, plant or car repair shop (tyre gas)! Wear-free operation >99.5% pure nitrogen from mostly existing in-house compressed air Constant and safe gas generation guarantees reliable analytical results Operation-free 24-hour operation also in hazardous areas Safe operation due to low operating pressures Economically thanks to fast payback even on a technical scale! N2 production according to the membrane process The nitrogen generators continuously supply nitrogen up to a maximum purity of 99.5%. After the compressed air flows through highly effective filters, the compressed air is decomposed in a hollow fiber membrane module into a concentrated nitrogen flow and an oxygen-enriched portion. The membrane process has the great a ...

AGFA Viper 3.04 Software rip consisting of dongle, CDs (original 3.01 and update 3.04), APIS board and APIS adapter Available now

<br>AGFA Apogee Print-Drive Series 3 VLF with Inkdrive, DQS and TIFF output. The Inkdrive(CIP3), DQS, and TIFF output options are enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

<br>AGFA Apogee Print-Drive Series 3 VLF connect to open. Open is Connect enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now