delta v used for sale

3/2-way valve, mini solenoid valve, solenoid valve, pneumatic valve, air valve, pressure valve Valve block, control block -Type: 6012-C-1,2-FB-PA Price: per piece -Quantity: 6x Available -Weight: 0.2 kg

4/2-way valve, disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -24 V AC/DC 2 W -PN: 0.2-10 bar -Price: per piece -Quantity: 8x Available -Weight: 0.2 kg/piece

4/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 401 005 Price: per piece -Quantity: 2 available -Weight: 0.6 kg

3/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 400 004 Price: per piece Quantity: 5 available -Weight: 0.4 kg

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 231 004 -Price: per piece -Quantity: 1x Available -Weight: 0.3 kg

Selling Proposal  DESIGNATION REFERENCE QUANTITIES SIEMENS SIMATIC S7-300 PLC 1 SIEMENS SM321 4 I/O BOARD SIEMENS SM322 I/O BOARD 4 FUSE DISCONNECT SWITCH WOHNER LTS-2 3 FUSE DISCONNECT SWITCH WOHNER LTS-000 3 VOLTAGE REGULATOR ROWAN ELETTRONICA 310 S.C/6M 3 EMERSON SP 1406 25 DRIVE EMERSON SP 2401 2 DRIVE

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 015 025 -Number: 1x valve available -Price: per piece -Weight: 0.7 kg

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -PN: 2-10 bar Price: per piece Quantity: 2 available -Weight: 0.5 kg

HOT PRESS model SIMI 4LP second hand machine plates useful size mm. 2500 x 1300 n.04 pistons diam.mm. 80 max. thrust Ton. 60 specific pressure max. kg.2 / cm2 opening mm. 320 hot water plates heating via wood boiler (optional) weight kgs. 3000

Various rustic furniture in spruce and walnut wood See photos!

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -Connection: 1/4 inch Price: per piece Quantity: 1 available -Weight: 0.8 kg

Storage module, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve Price: per piece Quantity: 3 available -Weight: 0.4 kg

5/3-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 235 101 Price: per piece Quantity: 3 available -Weight: 0.3 kg

5/3-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 221 012 -Price: per piece -Quantity: 2 available -Weight: 0.5 kg/piece

CNC Machining Center Vertical DECKEL-MAHO - DMC 635 V Built in 2006 in good condition. Control iTNC 530 Heidenhain Duty Cycle: 35172 Hours: 5903 Specifications: x-travel 635 mm y-travel 510 mm z-travel 460 mm Main Spindle: Speed range - main spindle 20 - 8,000 min/-1 Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 83 / 57 Nm Clamping force 8 kN Workbench: Table clamping surface 790 x 560 mm Number of T-slots 4 + 1 T-slots - spacing 100 mm T-slots - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg Table height above floor 720 mm Distance between spindle nose and table 120 - 580 mm Tool changer: Number of tool slots 20 pos. Max. tool width 80 / (130) mm max. tool length 250 mm max. tool weight 6.0 kg max. total weight 80 kg Tool - Tool change time 1.6 sec Changeover time span - span 6.0 sec Feeds: Rapid traverse 30 m/mi ...

CNC Machining Center Vertical DECKEL-MAHO - DMC 63 V Built in 2002 in good condition. Control Heidenhain TNC 430 Heidenhain Hours: 10985 Specifications: Main spindle Speed range - main spindle 20 - 8,000 rpm Drive power - main spindle 13 / 9 kW Max. torque 83 / 57 Nm Tool holder SK 40 Workbench: Table clamping surface 800 x 500 mm max. table load 500 kg Installation height max. 240 mm Number of T-slots 5 T-slots - width 14 H12 mm T-slots - spacing 100 mm Distance between spindle nose and table 150 - 650 mm Feeds Feed rate X, Y, Z: 30,000 mm/min Rapid traverse ( X / Y / Z ) 30 m/min Tool changer: Tool changer 24 pos. max. tool diameter 80 mm max. toolthrough. with a free neighbor's box. 140 mm max. tool length 300 mm max. tool weight 7 kg Total power requirement 30 kVA Machine weight approx. 4 t Space requirement approx. 4.0 x 3.5 x 2.7 m Accessor ...

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 022 503 Price: per piece Quantity: 5 available -Weight: 0.4 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: EB5 DW -Price: per piece -Quantity: 1 available -Weight: 3.6 kg

Bowl cutter Meissner Type: RSM 325 Condition: Need renovation/used

Fabr: Kuper Type: FW Machine No: 0371 Year: 1966 Stand projection: 1150 mm Throughput speed: approx. 10 - 30 m min. Propulsion: Brake motor 0.55 kW 380 V, optionally 220 V three-phase current Total connected load: 1.8 kW Heating: 7 V 120 W Weight: 630 kg Space requirement: 2300 / 800 mm Crate dimensions: 2450 / 1450 / 900 mm Ship space: 3.2 m³

Control Heidenhain TNC 620 Travel X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 min-1, Tool magazine for 30 Wkz., SK 40, Cooling by the spindle 12 bar, Conveyor

Ventilation system, Comfort compact ventilation -Volume flow rate: 6000 m³/h -Engine power: 1.85 kW -Dimensions: 1950/1100/H1200 mm -Weight: 260 kg

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -Connection: 1/2 inch -Pilot: 3.9-10 bar -Pmed: 16 bar -Quantity: 1 available Price: per piece -Weight: 1 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve -without: drive -Connection: DN65 -Nominal pressure: PN16 -Width: 100 mm -Material: stainless steel -Weight: 3.3 kg

Steel tank, horizontal, very thick-walled Volume: 61,800 L Dimensions: Ø 2.50 m × 13.26 m long, total height incl. brackets: 3.10 m with welded-on brackets 60 cm high

Clamping range Ø 15–160 mm Max. workpiece weight 15 kg Weight of the prism vise 3.0 kg

SECOND-HAND VERTICAL SANDER

Diaphragm valve DN40, plastic diaphragm valve 2/2 way -Type: 677 25D 0 1142 -Max. pressure: 6 bar -Weight: 1.6 kg

Check valve, check valve -Type: RK 86 DN 20 -Connection: DN20 -Nominal pressure: PN40 -Total length: 16 mm -Material: stainless steel -Weight: 0.4 kg

Check valve, check valve -Type: RK 86A DN 32 -Connection: DN32 -Nominal pressure: PN40 -Material: stainless steel -Weight: 0.8 kg

Check valve, check valve -Type: RK 86 DN 25 -Connection: DN25 -Nominal pressure: PN40 -Material: stainless steel -Number: 2x valves available -Price: per piece -Weight: 0.5 kg/piece

GRP tank, suitcase tank, vertical, three-chamber tank with three domes and lids Water tank, upright Polyester tank with a volume of 10,000 L Dimensions: 1.40 m wide x 1.90 m deep x 4.35 m high

Inv. Num. : 3505 Type: AJV-25/404 Producer: MAZAK Generated: Parameters: Control system: MAZATROL M-32 Work table length: 1240 mm Work table width: 550 mm Maximum table load (even): 800 kg Spindle drive power: 15 kW Minimum vertical spindle speed: 28 1/min Maximum vertical spindle speed: 4000 1/min Mechanical feed length axis X: 1000 mm Mechanical feed length axis Y: 508 mm Mechanical feed length axis Z: 460 mm Cone: ISO 40 Number of tools: 30 pieces Maximum tool diameter: 100 - 150 mm Max. tool weight: 8 kg Distance between uprights: 650 mm Accuracy: 0.02 mm Machine height: 3026 mm Machine length: 3810 mm Machine width: 2590 mm Machine weight: 8.1 t

SECOND-HAND VERTICAL SANDER WITH 2 BELTS OMA MOD. UNICA - transversal sanding on two sides of straight or shaped / curved elements - n. 2 motors for abrasive belts 7.5 hp each - n. 2 abrasive belts 3700x90 mm - Automatic feeding 4-20 m / min - minimum working length 320 mm - Max. piece height 130 mm - CE year 2001

SECOND-HAND VERTICAL HYDRAULIC CLAMP FOR WOOD PANELS STROMAB MOD. SL1 - CE RULES - volt. 400/50 - year 2009 - 3000x1300mm

Check valve, check valve -Type: RK 86 DN 20 -Connection: DN20 -Nominal pressure: PN40 -Material: stainless steel -Number: 2x valves available -Price: per piece -Weight: 0.4 kg/piece

Nilfisk CTS40-LZ22 Industrial vacuum cleaner 2008, industrial vac cleaner, 4Kw rated, mobile, 3Ph

Check valve, check valve -Type: RK 86A DN 20 -Connection: DN20 -Nominal pressure: PN40 -Material: stainless steel -Number: 6x valves available -Price: per piece -Weight: 0.4 kg/piece

Check valve, non-return valve -Type: RK 86A -Connection: DN40 -Nominal pressure: PN40 -Total length: 32 mm -Material: Stainless steel -Number: 2 valves available -Price: per piece -Weight: 1.2 kg/piece

Key data: 1200 mm, 400 mm, 425 mm

Inv. Num. : 4455 Type: FZ 16L Producer: CHIRON Created: 1987 Parameters: Control system: Siemens Sinumerik System 3 Work table length: 1880 mm Work table width: 475 mm Mechanical feed length axis X: 1200 mm Mechanical feed length axis Y: 400 mm Mechanical feed length axis Z: 425 mm Machine height: 4000 mm Machine length: 2400 mm Machine width: 2800 mm Machine weight: 3500 kg

Check valve, non-return valve -Type: RK 86A -Connection: DN32 -Nominal pressure: PN40 -Total length: 28 mm -Material: Stainless steel -Number: 5 valves available -Price: per piece -Weight: 0.8 kg/piece

Check valve, non-return valve -Type: RK 86 -Connection: DN80 -Nominal pressure: PN40 -Total length: 50 mm -Material: Stainless steel -Weight: 3.5 kg

Disc valve, flap valve, ball valve -manual: drive -Connection: DN65 -Material: Stainless steel -Dimensions: 250/210/H200 mm -Weight: 6.2 kg

Machine vice, vise -Jaw width: 250 mm -Jaw height: approx. 80 mm -Clamping depth: max. 310 mm -Weight: 120 kg

Description: Type : Oil Transformer Variation : Hermetic Make : CG Power System IRELAND LTD. Year of construction : 2016 Condition : New Nominal power : 3200 KVA Medium voltage : 22 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Cooling Type : KNAN Total weight : 7366 Kg Oil weight : 1760 Kg Mineral OIL Elster Length: Width: Height: Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery . Available Mon to Sat 8 a.m. to 10 p.m.

Nv. Num. : 7401 Type: QM-40 SA Producer: Feller Created: 2007 Parameters: Control system: FANUC Maximum spindle speed: 20,000 1/min Number of axles: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Number of stacking positions: 24 pieces Machine weight: 6300 kg Equipment: BLUM 3D Workpiece Probe 2022/11: GO Interchangeable Arms Spindle change 2021: Installation of the BLUM workpiece probe 2020: Replacement of drive bearings and bolts on X/Y beams Replacement of caliper lubrication dispensers, new brake caliper covers Replacement of the spindle center cooling reducer