131,101 used machines on RESALE, but how to find them? Machine Search
Disc valve, flap valve, ball valve -Drive: without -Connection: DN50 -Material: Stainless steel -Number: 2 valves available Price: per piece -Weight: 2.2 kg
Disc valve, flap valve, ball valve -Drive: without -Connection: DN80 -Material: Stainless steel -Weight: 3.3 kg
Clocked, vertical Bosch flow-wrapping machine for powdered products with gassing and checkweigher The following components are installed: Bosch form, fill and seal machine Machine type: SVB3601R Year of construction: 2000 Clocked form, fill and seal machine Theoretically possible cycle rate: 50 btl./min. Bosch screw feeders Machine type: FVS 3091 SQ Products suitable for dosing: -Granules -Powder -Icing sugar -Flour - Ground coffee or coffee beans - Sauce, soup or milk powder, etc. Fumigation device Machine type: ZSG Basic 2 Residual oxygen monitoring can be switched on/off Bosch checkweigher Machine type: KWE 5000 Year of construction: 2009 The plant was dismantled and stored due to product changeover. 6 months before the removal of the machine, a lot of investments were made, including the installation of new sealing jaws and a new display. We ...
The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow-wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width cross: 2mm Seam width lengthwise: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erecting and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard currently. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap capping station Takeover of the folding cartons and transport to the filling station, fixation under the filling station a ...
Vacuum cutter VK 125 STL bowl 125 l, knife speed from 300 to 4200 rpm., Ejector hydraulic, without feeding, 6 cutter head, Busch vacuum pump, connected load approx. 40.0 kW Vakuum bowl cutter VK 125 STL,, Bowl volume 125 l, knife speed from 300 till 4200 rpm., unloader, without loading system, knife head with 6 knives, Busch vacuum pump, Power approx. 40.0 kW
Product number: 2859 Type: K64DC8Q-VA Serial number: 99099-1 Year of construction: 1999 Bowl: 65 litres Knives: variable speeds Bowl: 2 speeds Steam: 1.5 Bar, 55 kg/h Vacuumpump: Elmo 2BV2071, 125 m³/h Power: 3 x 400V, 50Hz, 50kW Dimensions: 1750 x 1950 x 2000 mm Weight: 1700 kg With unloader, water dosing, tempurate indicator
Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN80 -Width: 190 mm -Nominal pressure: PN10 -Weight: 18 kg
Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Type: 317 -without: drive -Plastic -Connection: DN25 -Width: 160 mm -Nominal pressure: PN10 -Weight: 1.2 kg
check valve, check flap -Type: RK 86A -Connection: DN40 -Nominal pressure: PN40 -Total length: 32 mm -Material: stainless steel -Quantity: 1 piece -Weight: 1 kg
Check valve, check valve -Type: RK 86A -Connection: DN15 -Nominal pressure: PN40 -Total length: 16 mm -Material: stainless steel -Number: 2x valves available -Price: per piece -Weight: 0.25 kg
Check valve, check valve -Type: RK 41/44 -Connection: DN15 -Nominal pressure: PN16 -Total length: 16 mm -Material: brass -Number: 2x valves available -Price: per piece -Weight: 0.1 kg
Check valve, check valve -Type: RK 86A -Connection: DN40 -Nominal pressure: PN40 -Total length: 28 mm -Material: stainless steel -Number: 2x valves available -Price: per piece -Weight: 0.75 kg/piece
Check valve, non-return valve -Type: RK 86A -Connection: DN40 -Nominal pressure: PN40 -Total length: 32 mm -Material: Stainless steel -Weight: 0.8 kg
Check valve, check valve -Type: RK 86A -Connection: DN40 -Nominal pressure: PN40 -Total length: 32 mm -Material: stainless steel -Weight: 1 kg
Check valve, non-return valve -Type: RK 56 -Connection: DN32 -Nominal pressure: PN40 -Total length: 27 mm -Weight: 0.45 kg
Check valve, non-return valve -Type: RK 86A -Connection: DN40 -Nominal pressure: PN40 -Total length: 32 mm -Material: Stainless steel -Weight: 0.8 kg
Check valve, non-return valve -Type: RK 41 -Connection: DN15 -Nominal pressure: PN16 -Total length: 16 mm -Material: Brass/Stainless steel -Number: 2 valves available -Price: per piece -Weight: 0.1 kg
Check valve, check valve -Type: RK 70 -Connection: DN32 -Nominal pressure: PN6 -Total length: 28 mm -Weight: 0.45 kg
Check valve, check valve -Type: RK 70 -Connection: DN32 -Nominal pressure: PN6 -Total length: 28 mm -Weight: 0.45 kg
Check valve, check valve -Type: RK 66A -Connection: DN80 -Nominal pressure: PN40 -Total length: 51 mm -Material: stainless steel -Weight: 3.1 kg
Check valve, non-return valve -Type: GS011 -Connection: DN100 -Nominal pressure: PN16 -Total length: 18 mm -Passage: 70 mm -Valve cover material: Stainless steel -Number: 1x valve available -Price: per piece -Weight: 2.5 kg
Check valve, non-return valve -Type: RK 66A -Connection: DN80 -Nominal pressure: PN40 -Total length: 50 mm -Material: Stainless steel -Quantity: 1 piece available -Weight: 2.5 kg
Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 200 mm -Clamping depth: max. 245 mm -Dimensions: 550/370/H195 mm -Weight: 80 kg
We sell here a vacuum sealer from the manufacturer Komet, type S 501 in a very good used and functional condition. The device runs on 400 volts, 3.5 kW, large chamber W/D/H 80/50/23 cm, electric lid opening, Busch vacuum pump 160 cbm/h, fumigation, rollable, workshop tested, ready for immediate use, dimensions W/D/H 100/75/120 cm, others on request.
Adjustable geared motor, variable speed geared motor, electric motor -Engine power: 0.75 kW -Speed range: 39 to 213 rpm -Motor: adjustable -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Dimensions: 450/410/H190 mm -Weight: 23 kg
Immediately available overhauled vibration dampers, also used we have all in stock.
Fire water tank, rainwater tank Steel tank with a volume of 50,000 L Weight: 14 tons Dimensions: Ø 3.00 m × 8.5 m long
Fire water tank, rainwater tank, underground Double-walled steel tank with a volume of 50,000 L Dimensions: Ø 2.50 m × 11 m long
Steel tank with a volume of 40,000 L standing, with feet, filter tank, water tank Weight: 8 tons Dimensions: Ø 2.90 m × 7.00 m high incl. feet Feet are 1 m high
Filter tank, water tank, upright, feet Steel tank with a volume of 23,000 L Weight: 6 tons Dimensions: Ø 2.70 m x 5 m high incl. feet Feet are 1 m high
Fire water tank, rainwater tank, water tank Steel tank with a volume of 40,000 L, upright Dimensions: Ø 3.20 m × 8.00 m high
Fire water tank, rainwater tank double-walled steel tank with a volume of 30,000 L Dimensions: Ø 2.50 m × 10 m long
Buffer tank, isolated. lying Steel tank with a volume of 27,500 L Dimensions: Ø 2.50 m × 7 m long Weight: 8 tons Insulation: 15 cm thick
Water tank Steel tank with a volume of 25,000 L Dimensions: Ø 3.20 m × 4.50 m high
Steel tank, horizontal, double-walled, with leak detector Volume: 7,000 L Dimensions: Ø 1.60 m × 3.50 m long
Ball valve internal thread -Internal thread: 2 -Full: Pass, full ball -Quantity: 5 available -Price: per piece -Weight: 3 kg/piece
X axis travel 12.000mm Max height under head 1.800mm Y axis travel 3.200mm Z axis travel 1.000mm W axis travel 2.100mm Table dimensions 12.000 X 3.000mm Max weight on table 60 ton Spindle power 47 Kw Max spindle speed 4.000 Rpm CNC SIEMENS 840 D Head changer with nr.04 heads ATC 60 utensili Rebuilt year 2008
Ball valve internal thread -Internal thread: 2 -Full: Pass, full ball -Quantity: 10 available -Price: per piece -Weight: 0.2 kg/piece
Ball valve internal thread -Internal thread: 2 -Full: Pass, full ball -Quantity: 3 available -Price: per piece -Weight: 1 kg
Ball valve internal thread -Internal thread: 2 -Full: Pass, full ball -Quantity: 24x Available -Price: per piece -Weight: 1 kg/piece
YOM 2009 X axis travel 28.000mm Y axis travel 6.500mm W axis travel 2.000mm Z axis travel 1.500mm Table dimensions 25.000X5.000mm Automatic head changer with Nr. 03 heads Nr.10 planos 5.000X2.500X300mm CNC SIEMENS 840 D nr.03 axes automatic head in continuos, spindle speed max 4.000rpm,56 Kw, HSK A 100 Vertical head max spindle speed 3.000rpm,56 Kw, HSK A 100 Angular head max spindle speed 3.000rpm,56 Kw, HSK A 100 High pressure refrigeration trough spindle (50 bar) ATC 120 positions
used
Multivac R 240, film width 430 mm, fume hood 530 mm, 5 formats, soft film, fumigation, good condition. Still in production until February 2024
DECKEL MAHO DMC 63 V CNC vertical machining center was built in Germany in 2005. The machine used in series and unit production, is characterised by its high machining capacity and stable construction with a reinforced work table, which ensures the highest possible precision in milling. The installed FANUC 180i-MB CNC controller additionally guarantees trouble-free operation of the machine and the use of its full potential and capabilities. The DECKEL MAHO GILDEMEISTER CNC machining center has been serviced on an ongoing basis and has worked for 26040 hours to date. Technical data of the DECKEL MAHO DMC 63 V milling center - work table dimensions (L x W): 800 x 500 mm - feed rates in the X/Y/Z axis: 630/500/500 mm - positioning accuracy of the X,Y,Z axis: 0.010 mm - maximum spindle rotational speed: 10000 rpm - spindle taper: SK 40 - 24-position tool magazine - operating hours: ...
Ball valve internal thread -Internal thread: 2 -Full: Pass, full ball -Quantity: 7x Available -Price: per piece -Weight: 2 kg/piece
Used stainless steel, 5000 L volume. Process tub, complete with curd cutting harps. It was used for the production of granular cheese.
Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Type: CPV10-GE-MP-6 -Connection: electrical -Weight: 1 kg
Leadwell MCV 610CR Vertical Machining Center :::SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 0 - M Tool holder: ISO 40 Spindle speed: 6000 Number of tools: 24 X-axis stroke: 610mm Y-axis stroke: 410mm Z-axis travel: 510mm Rapid feeds for linear axes X Y Z: 20m/min Table size: 890 x 500mm Table capacity: 300Kg Machine equipment: Fourth axis table :::D DIMENSIONS AND WEIGHT::: Length: 2040mm Width: 2820mm Height: 2800mm
Stainless steel multi-clamping prism A143-6-10-fold, size W 57 x L 143 x H 76mm, ground on all sides with steps.
maximum number of results exceeded
please refine your search
