delta v used for sale

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Vario Viso With adjustable angle 0 - 100° Max. drive speed 15,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 15 Nm Tool interfaces: combination ER 25 and saw, saw blade flange 30 mm Version with one single clamping screw, locking with the lever

New CNC drilling- and dowel inserting machine Brand: VITAP Type BLITZ 3.0 Blitz CNC drilling glueing and dowel inserting machine (axis X) 1300mm. Highly efficient and reliable thanks to a easy software. Ideal for JUST IN TIME production or mass production. Machine standard equipment: - Drilling head 3500 rpm - N °3 horizontal indipendent spindles - N° 3 vertical indipendent spindles - N °1 glue and dowels inserting unit - N °1 high capacity vibrator to feed the dowels - N° 1 low pressure pump for the glue Working area horizontal head: - X= 1300 mm - Y= 50 mm - Z= 50mm (vertical) - Z=25mm (horizontal) Combined drilling and driving unit for dowels: - Configurations of min. 6 x 25 mm and max. 10 x 40 mm are possible. - The desired dowel configuration must be specified when ordering. Sets for further dowel configurations are optionally availab ...

CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Vario Viso Angle adjustment 2 x 0 - 100° on two sides adjustable Max. drive speed 13.760 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,09 Turning direction left/right Torque max. 22 Nm Tool interfaces: combination ER 25 and saw, saw blade flange 30 mm, Pitch circle 45mm and 52mm

Throughfeed case clamp Make: ERREGI Type: Tecnopress VR2/2 New machine Fast - Silent - Clean - Lean - Universal - Service by Wehrmann Technical data:  Self-positioning thru-feed carcase press The load bearing structure of the machine consists of a double portal in welded tubular steel, inside of which the two mobile heads and the presser table run. -The presser table and the mobile head are driven by motors. - Each of the mobile head and fixed is fitted with three horizontal pressure beams with programmable positioning moved vertically by an electro mechanical system. - The belt system is positioned on either side of the machine to allow the carcase to be clamped equally well, whether is his depth. -The carcase transfer system is located at the bottom of the bed and consists of an electro-welded steel structure on which a closed loop belt rolls ...

Brush sanding machin with 3 working units. Machine has only a few operating hours. 1st working unit: - 5 rotating heads with 3 discs each - disc diameter 125 mm - quick change of the discs - motorized height adjustment 2. Station: - brush with diameter 300 mm - motorized height adjustment - Electronic inverter 4 kW 3. Station: - brush, diameter Durchmesser 300 mm - motorized height adjustment - Electronic inverter 4 kW - Rotative blower cleaning panel - Touch Screen IPC COMPACT 8,5 - conveyer with vacuum table - vacuum fan 7,5 kW - Vorschubgeschwindigkeit wird über einen FU geregelt - conveyer electronic inverter 2,2 kW - Producer Viet - Type Opera 5-3.3 XLL - Working width 1.350 mm - Year of construction 2018 - Working height 900 mm - Max. part height 200 mm - Vacuum transport belt - Operating side, left - Standort, nicht am Lager - Voltage / HZ 400/50 - Spannungsschwankungen ma ...

Capacity: 300l, working position 0-40kg: 22° from horizontal, working position 40-260kg: tilted 45°. Main drive gearbox type: RF 73DT 80N4 SEW (Siri 52/72/8BA), power: 0.75kW, design: B 5, rated current: 3.8/2.2A, position: KLK 90°, voltage: 220/380V, 50Hz, multi-range, speed: 21-1400/min, seal: Kaco Ø 50 high, D-seal: SV-full. Tilting gearbox type: KA76 TR42 DT71 D4 BM SEW, hollow shaft diameter: 50mm, power: 0.37kW, design: H 4A, rated current: 2.25/1.3A, position: KLK 0°, voltage: 220/380V, 50Hz, multi-range, speed: 1.6-1400/min, braking torque: 5Nm, brake voltage: 220V, rectifier: BG 1.5. With operating manual and documentation. An inspection on site is possible.

A complete double agitator system 2 x 3000l made of high-quality V2A including propeller agitators made of V2A, continuously variable speed-controlled. Inspection by appointment possible.

Test chamber volume: 190l, temperature range: -70°C/180°C, temperature stability: +/-0.5K, test chamber dimensions X/Y/Z: approx. 580mm/450mm/750mm, machine dimensions X/Y/Z: approx. 800mm/1300mm/1800mm, weight: approx. 550kg. Documentation available. An on-site inspection is possible.

with two vacuum fans - Producer Fladder - Type Gyro 300 VAC-2 - Working width 1300 mm - Year of construction 1997 - Number of brush heads 6 Stk. - Rotating and oscillating sanding head - With sound insulating cabinet - Motor power 5 kW - Vacuum transport belt - Feed speed infinitely adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Location - Voltage / HZ 400 / 50

wird mit neuem VakuumTransportband ausgeliefert. - Producer Fladder - Type Gyro 300 VAC - Working width 1300 mm - Year of construction 1994 - Number of brush heads 6 Stk. - Rotating and oscillating sanding head - Motor power 5 kW - Vacuum transport belt - Feed speed infinitely adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Location - Voltage / HZ 400 / 50

- Producer Venjakob / Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

length: 760 mm width: 730 mm height: 1120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table milling machine BÄUERLE SFM -used-planed cast iron table, finely adjustable milling fence, clockwise/counterclockwise rotation---------- Technical data ----------Table size: 1100 x920 mm, work table height: 830 mm, spindle diameter: 30 mm, speeds: 2,800,4,500,5,600,6,000,9,000,12,000 rpm.

length: 760 mm width: 730 mm height: 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 760 mm width: 730 mm height: 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal lathe with cycle control VDF Boehringer VDF 400 DUS Control: Siemens Sinumerik 840 Year of Make: 2014 Internal machine no. 57 Turning length: 1,000 mm Turning diameter over bed / face slide: 420 / 235 mm Displacement of face slides: 250 mm Max. speed: 10 – 3,000 rpm Accessories: - Bezel - Suction - 3- Jaw chuck Schunk 250-62 - Tool holder

- Tape inserter - Standard Model

- Tape inserter - Standard Model

- Tape inserter - Standard Model

- Tape inserter - Standard Model

Glass Bottle Filling Line, 3000 bph, with Markl Bavaria Counter Pressure Filler This complete bottling line was delivered by the German manufacturer Markl Brauereimaschinen in 2015 and is still in operation. The line consists of a semi-automatic bottle off-loading system, where new bottles are lifted layer-by-layer from pallets onto the feeding table. It also includes a VELA CW 30 linear labelling machine for self-adhesive, single roll-fed labels. The filling system is a Markl Bavaria type 12/3 VKL 12 counter-pressure filler equipped with 12 filling valves, a single air pre-evacuation system with CO₂, a rotating filler, and a 3-head crown capper. The highly efficient pre-evacuation vacuum is vented directly from the center of the bottles. Pressurizing CO₂ gas is introduced at the bottom of the bottle—precisely where the beverage flows smoothly into the container. The CO₂ cush ...

Used dough weigher, conical rounder and long roller All in all EUR 5,990 Visits and test runs are possible by arrangement.

x-travel: 1270 mm y-travel: 660 mm z-travel: 610 mm total power requirement: kW weight of the machine ca.: 8680 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 7-axis Citizen Cincom A320-VII mod. A20-3F7 was manufactured in 2019. It features a maximum workable diameter of 20 mm, with an option for 25 mm, and a maximum workable length of 200 mm. The machine is equipped with a Fanuc 32i CNC control and includes a bar feeder, high-pressure coolant system, and a chiller. If you are looking to get high-quality turning capabilities, consider the Citizen Cincom A320-VII machine we have for sale. Contact us for further details.

dimensions: ca. 1030 x 1090 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

Offer 24310 Technical data: - Manual saw blade feed - Workpiece covering in the machine vice - Saw blade diameter 315 mm - 2 cutting speeds 40 - 80 m/min - Cutting range at 90° around 110 mm - Rectangle 82 x 160 mm - Square 82 x 82 mm - mitred at 45° about 110 mm - Rectangle 80 x 120 mm - Square 82 x 82 mm - Drive 400 V / 1.4 / 1.9 kW - Coolant device - Space requirement approx. W 600 x H 1600 x D 750 mm - Weight approx. 300 kg

turning diameter over bed: 570 mm turning diameter over slide rest: 365 mm turning length: 3000 mm spindle bore: 62 mm spindle turning speed range: (24) 11,2 - 2240 U/min workpiece weight: 500 kg workpiece weight in steadies max.: 630 kg longitudinal feeds:: 0,063 - 56 mm face feeds: 0,0315 - 28 mm radial face slide travel: 345 mm upper slide-adjustment: 125 kW tailstock quill diameter: 80 mm tailstock quill adjustment: 190 mm main drive motor: 15 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5,5 x 1,44 x 1,38 m Well-maintained lathe from the maintenance department. Equipment and accessories: 3-axis D.R.O., HEIDENHAIN ND 7013 3-jaw chuck FORKARDT F+315 4-jaw chuck RÖHM, 500 mm diameter Feed in upper slide Rapid traverse Lamp Coolant equipment Boring bar holder Center points Multifix tool holder with tool holder Steady rest Machine documentation The data  ...

: 560 mm : 320 mm : 400 mm : 950x450 mm : 1050x320 mm : 25-3600 U/min : SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 160 KW, 400 V

Vissmann Vitobloc 200, Enine MAN E2878 E312, 160KW electric approx. 210KW thermal, approx. 50,000h all maintenance and overhauls carried out. 2 pieces available.

The NeoDen ND1 is a high-precision automatic SMT screen printer designed for professional PCB solder paste printing. With a repeat accuracy of +/- 12.5 micron at 6 sigma and Cp of 2.0 or greater, it delivers the precision and reliability demanded by high-quality electronics manufacturing. Manufacturer: NeoDen Model: ND1 Fully Automatic Vision Printing Machine Year of Manufacture: 2026 Type of Machine : Stencil Printer Technical Specifications - Maximum PCB size: 450x350 mm - Minimum PCB size: 50x50 mm - PCB thickness: 0.6 mm to 14 mm - Maximum PCB weight: 10 kg - Transmission speed: 1500 mm/second maximum - Template frame size: 370x470 mm to 737x737 mm - Maximum print area: 450x350 mm - Print head: closed-loop print head with straight line motor - Scraper type: steel or rubber scraper, angles 45 / 55 / 60 degrees - Scraper length: 220 mm to 500 mm - Scraper blade thicknes ...

The NeoDen ND2 is an advanced SMT automatic screen printer designed for easy operation, high precision, and high stability PCB solder paste printing.With a repeat position accuracy of +/- 10.0 micron at 6 sigma and Cpk of 2.0 or greater, the ND2 delivers superior precision over its predecessor the ND1. Manufacturer: NeoDen Model: ND2 Fully Automatic Visual Printer Year of Manufacture: 2026 Type of Machine : Stencil Printer Technical Specifications - Maximum PCB size: 450x350 mm - Minimum PCB size: 50x50 mm - PCB thickness: 0.4 mm to 6 mm - Maximum PCB weight: 3 kg - Transmission speed: 1500 mm/s maximum - Transfer height from ground: 900 +/- 40 mm - Transfer direction: left-right, right-left, left-left, right-right - Template frame size: 470x370 mm to 737x737 mm - Maximum print area: 450x350 mm - Print head: floating intelligent printing head with two independent direct co ...

eccentric press Type: LE 250 P Manufacturer: VSS Year: 2008 Pressing force: 250 t Stroke: 30-140 mm Max number of strokes: 45/min Slide adjustment: 110 mm Worktable dimensions: 1120 x 800 mm Ram dimensions: 800 x 475mm Machine weight: 13000 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -

: gebraucht : 6112A : prompt, Zwischenverkauf v : China : 110 € : 1 : 530 - 870 mm : 700 kg : 20 kg : 2 x 125 mm : 52 mm : 2 univsersal useable (band saws, circular saws, eg.) infinitely variable height adjustment perfect for round tubes, because of V-type The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Evaporator Goedhart -Type: VRB 82457 -Cooling capacity: 20 kW -Fin spinning: 7 mm -Fans: 2 x 450 mm -Dimensions: 2060 x 900 x 750 mm -Stainless steel housing and block -Electric heating -Volume: 34 L -Weight: 200 kg -Quantity in stock: 1 -Reference number: CH 602 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Evaporator Goedhart -Type: VNS 65407 E -Cooling capacity: 27 kW at -8°C -Fin spinning: 7 mm -Electric defrost -Fans: 5 x 400 mm -Dimensions: 4200 x 800 x 600 mm -Volume: 44 L -Weight: 310 kg -Quantity in stock: 10 -Reference number: CH 598 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Evaporator Goedhart -Type: VRB 61507 -Cooling capacity: 14.5 kW -Fin spinning: 7 mm -Fans: 1 x 500 mm -Dimensions: 1460 x 800 x 770 mm -Stainless steel housing and block -Volume: 17 L -Weight: 120 kg -Quantity in stock: 1 -Reference number: CH 601 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Conveyor belt Venjakob Type Belt Conveyor Belt Year of manufacture 1987 Conveyor belt width 1300 mm Support length 4800 mm Motor drive 0.55 kW Dimensions outside Length 5000 mm x Width 1700 mm x Height 950 mm Weight 670 kg

Excellent condition - Fully operational - Loading / Transport possible! number of vertical spindles 10 (5+5) number of horizontal spindles in X 2+2 number of horizontal spindles in Y 1+1 Workpiece dimensions: min panel dimensions X 200 , Y 70 , Z 10 mm max panel dimensions X 3200, Y 900, Z 70 mm Work piece weight max. 35 kg axes speed (real) X25 m/min, Y50 m/min, Z25 m/min power supply 380 VAC, 3 phases, 50 Hz rated current 23 A installed power 12.2kW air clamping 3/4" automatic tool changer suction 2750 30 m/s machine dimensions 2430 x 2070 x 2600 mm Weight 1300 kg

General SKU001A015 Makeunknown Mounted on legscheck Main Features MaterialStainless steel Volume1000 Ltr. Specified Features - Stirring vessel MaterialStainless steel 1.4401 (316) Closed stirring vessel(1x) Capacity± 1000 Ltr Vessel sizesdia. 1200x800mm Dished bottomcheck Dished top sidecheck With covercheck Top connections(12x) Outletcheck Half coil jacketedcheck With paddle stirrercheck Motorcheck Information LocationBarneveld Floorspace1,4x1,4 M Total height3,5 MDiscountStirring vessels-DiscountStirring vessels > Stirring vesselsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU005X004 MakeSpeciaal Roestvrijstaal Industrie Veenwouden Type1,2 m³ No.1913873 Year of construction1991 Mounted on legscheck Pressure Working pressure3 Bar Main Features MaterialStainless steel Volume1200 Ltr. Motor1.1 KW Specified Features - Stirring vessel MaterialStainless steel 1.4404 (316L) Closed stirring vesselcheck Capacity1200 l. Vessel sizesø 1200 x 700 mm Dished bottomcheck Dished top sidecheck Top connectionscheck 12x Outletø 50 mm Max. temperature—10 / 50 °C With propellor stirrercheck Motor1,1 kW, (380 V 1450 rpm) Speed mixing shaft225 rpm Information LocationBarneveld Floorspace1,2x1,2 m Total height3,0 m Weight650 kgDiscountStirring vesselsSpeciaal Rvs InDiscountStirring vessels > Stirring vesselsBrand > Speciaal Rvs In What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new - ...

General SKU076Y588 MakeDynamit Nobel AG No.1025 Year of construction1982 LocationBarneveld Pressure Working pressure1 Bar Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume1040 Ltr. Motor5 KW Specified Features - Stirring vessel MaterialStainless steel Closed stirring vessel(1x) Capacity1040 Ltr Vessel sizesdia. 1000x1050mm Dished bottomcheck Dished top sidecheck Manhole/hand hole dia. 200mm Top connectionsdia. 100mm + 4x dia. 50mm Outletdia. 100mm With jacket(205 Ltr) Max. temperature120 Degr. C., With blade stir. Ekato,EM-080 Motor5,0 KW, 380 Volt (Ex) with variable speed dr. Information Floorspace1,4x1,4 M Total height3,9 M ATEX compatiblecheckDiscountStirring vesselsDynamit NobelDiscountStirring vessels > Stirring vesselsBrand > Dynamit Nobel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price ...

General SKU053A266 MakeTerlet Zutphen No.81 101 Year of construction1981 Mounted on legscheck Mounted on wheels Main Features MaterialStainless steel Volume1250 Ltr. Motor1.8 KW Specified Features - Stirring vessel MaterialStainless steel 1.4401 (316) Closed stirring vesselcheck Capacity1250 l Vessel sizesø 1200 x 1100 mm Slope bottomcheck Manholeø 495 mm Outletø 45 mm With paddle stirrercheck Motor1,1/1,8 kW, 380 V Information LocationBarneveld With switchcheck (as is) Floorspace1,2 x 1,4 m Total height2,1 mDiscountStirring vesselsTerletDiscountStirring vessels > Stirring vesselsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...

General SKU060Y349 MakeHermann Waldner GmbH Wangen No.W-3188 Year of construction1994 LocationBarneveld Specified Features - Stirring vessel Material finishPolished inside Pressure Working pressure1 Bar Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume568 Ltr. Motor0.88 KW Stirring vessels MaterialStainless steel 1.4435 (316L) Closed stirring vessel(1x) Capacity568 Ltr Vessel sizesdia. 800x900mm Dished bottomcheck Dished top sidecheck Manholedia. 250mm Top connections3x dia.35mm + 3x dia.45mm + dia. 60mm Outletdia. 50mm With jacket(60 Ltr) Max. temperature90 Degr. C. With propellor stirrermake Ekato, type EM-040 Motor0,55/0,88 KW, 400 Volt Speed mixing shaft498/975 Rpm Information Floorspace1,6x1,6 M Total height2,4 M Extra Specifications- Equipped with 3 CIP nozzles DiscountStirring vesselsHermann WaldnerDiscountStirring vessel ...

General SKU305U634 LocationBarneveld CEcheck MakeHaver & Boecker Type1 WXEH- (U) Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialStainless steel 1.4301 (304) Powder fillercheck Bag fillercheck Pneumatic fillingcheck Number of dosing heads:1 Dosing15 and 20 kg (max. 50 kg) Capacity30-100 bags/hour a 15 and 20 kg With motor 7,5 kW, 400 volt, 1500 rpm (EX) With hoppercheck Hopper sizesDia. 400x640 mm With mixer in hoppercheck Information No.51/246325/01 Year of construction2005 Mounted in framecheck With switchgearcheck Floorspace1,4 x 1,8 m Total height2,1 m Weight800 kg ATEX compatiblecheckPowder fillersPowdered foodsHaver & BoeckerPackaging machines > Powder fillersIndustries > Food & Feed > Powdered foodsBrand > Haver & Boecker What you can expect from Foeth: -- Machine is in working condition -- At a reduce ...

General SKU050Y334 MakeNetzsch Mastermix Aldridge TypePMD-200 Year of construction1992 Mounted on legscheck Pressure Working pressure0.4 Bar Vacuum possiblecheck Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1230 Ltr. Motor55 KW Specified Features - Stirring vessel Closed stirring vesselPolymer Preparation Mixer (1x) Capacity1230 Ltr Vessel sizesdia. 1130x1250mm, Flat bottom Dished top sidecheck Manholedia. 300mm Top connections(6x) Outletdia. 85mm With jacket(150 Ltr) Max. temperaturejacket 95 Degr. C, Vessel 125 Degr. C. With anchor stirrerscraper stirrer Motor17,5 KW, 380 Volt (Ex) Speed mixing shaft15 Rpm With homogeniserHigh speed disperser hydraulic driven Motorhydraulic drive unit 55,0 KW, 380 Volt (Ex) MaterialStainless steel 1.4301 (304) Information LocationBarneveld ATEX compatiblecheck Extra Specifications- High spee ...

General SKU010A060 MakeTerlet Zutphen No.89542 Year of construction1989 Mounted on legscheck (Mounted on wheels) Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume30 Ltr. Motor0.75 KW Specified Features - Stirring vessel MaterialStainless steel 1.4401 (316) Closed stirring vesselcheck Capacity30 Ltr. Vessel sizesø 400x350 mm With covercheck With jacketcheck (2 Ltr) Max. temperature143 °C With paddle stirrercheck and ribbon stirrer (exchangable mixing tool) Motor0,75 kW 380 V 1450 rpm Speed mixing shaftvariable (frequency converter) Information LocationBarneveld With switchgearcheck Floorspace1,4 x 1,0 m Total height1,3 m Weight200 kgDiscountStirring vesselsTerletDiscountStirring vessels > Stirring vesselsBrand > Terlet What you can expect from Foeth: -- Machine is in working condit ...

General SKU080A390 MakeGiusti & Son Ltd TypeLabomix - MKII No.J-10942.A Year of construction1990 LocationBarneveld Material Product contact materialStainless steel 1.4306 (304L) Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume15 Ltr. Motor0.37 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity15 l. Vessel sizesø 295 mm x 470 mm Hollow bottomcheck Dished top sidecheck With covercheck Top connectionscheck Outlet25 mm With jacketcheck Max. temperature130 °C With anchor stirrercheck with scrapers Motor0,37 kW, 240/415 Volt (Ex) Speed mixing shaft28 rpm MaterialStainless steel 1.4306 (304L) Information With switchgearcheck Floorspace0,8 x 0,6 m Total height1,4 m Weight300 kg ATEX compatiblecheck Extra Specificationswith vacuum pump. 0,26 kW, 240/415 V ...

General SKU132X770 MakeEberhard Hoesch & Söhne, Düren TypeGK6/3500/SO No.32 6333 Year of construction1988 LocationBarneveld Main Features MaterialHastelloy Volume3500 Ltr. Motor9.2 KW Specified Features - Stirring vessel MaterialStainless steel 2.4610 (Hastelloy C-4) Open stirring vessel(1x) Capacity3500 Ltr Vessel sizesdia. 1800x1300mm Dished bottomcheck Flat top sidecheck With covercheck Manhole800x450mm Outletdia. 175mm With jacketcheck With propellor stirrerHoesch Gegenstromrührer With gate type stirrercheck Motor9,2 KW + 7,5 KW, 380/660 Volt Speed mixing shaftvariable (12-49 prop./ 21-87 Rpm gate)DiscountStirring vesselsHoeschDiscountStirring vessels > Stirring vesselsBrand > Hoesch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

Overview  This fill level inspection machine was manufactured in 2017 and the label inspection machine in 2015 by German company Vision-Tec. The pusher was made by German company BBULL. It is designed for checking the fill height, closure and label of full bottles. The machine is until October 2025 in running production. Technical data Capacity: Adjustable Scope of Delivery  Fill level inspection system | Vision Tec | 2017 Label inspection system | Vision Tec | 2015 Reject system | BBULL