delta v used for sale

Description Mobile, height-adjustable sword folding unit to complement pocket and combination folding machines Low investment for increased versatility in the folding types As a third folding station for user-friendly U-shape By swivelling the sword folding unit by 180 degrees, the International Fourfold is folded for connection to machines with DCT control

Description Max. format: 52 x 36 cm Min. format: 12 x 10 cm Speed: 160 m/min Mobile, height-adjustable sword folding unit to complement pocket and combination folding machines Low investment for increased versatility in the folding types As a third folding station for user-friendly U-shape The international four-fold fold is folded by swivelling the sword folding unit by 180 degrees For connection to machines with MCT control with round plug Connection behind a steel saddle stitcher is possible via an optionally available coupling box

Description Heidelberg Steel Folder Bags Folding Machine TF 56-4-4-F SAK 56 with Cross Fold VFZ 52.2 from 1996 Format 56 x 84cm Flat Pile Feeder with Tremat and PCS 100 Preset Counter 1st Station 4 Pockets 56 cm and Downstream Knife Shaft 2nd Station 4 Pockets 56 cm and Downstream Knife Shaft 1 Mobile Scaling Delivery SAK 56 with Marking Device 1 DV Pump 1 Electromagnetically Working Window Rebate Pocket Analogue Steel VFZ 52.2 Sword Folding Unit from 1996 -Mobile, height-adjustable knife folding unit -As a second or third folding station for user-friendly folding in U-shape -By turning

Description with underbelt drive easy and fast manual adjustment of height and width for consistent package sizes gap-free gluing of the upper and lower flaps folding box width 130-520mm folding box length 150 mm to endless folding box height 100-520 mm infeed height adjustable from 650-750 mm output up to 30 packages min (depending on the package length) automatic conveyor belt shutdown set belt width 50 mm

Key data: 1200 KW, 1650 kVA, 400 V

NEW GAS GENERATOR SET MAKE: MWM TYPE: TCG2020 V12 RATING: 1200 KW M. YEAR: 2007 HOURS: 0 ENGINE NEVER BEEN USED SCOPE: GENSET, CONTROL PANEL, POWER BREAKER PANEL, GAS TRAIN

Description R+S Verpackungstechnik Side sealing machine FAS 700 with shrink tunnel VAST 652 from 2013/2014 1 Minitec conveyor belt built in 2013, L approx. 5,000 mm, W 200 mm, w. sideways Guide rails, 1 conveyor belt R+S TB 2000, built in 2014 SN RS-46010, L 2,000 mm, W 350 mm, base frame height-adjustable, w. lateral. adjustable guide rail, 1 side welder R+S VAS700 built in 2014, SN RS-45943 1 shrink tunnel R+S VAST652 built in 2013 SN RS-47085 1 conveyor belt R+S TB 2000 built in 2014 SN RS-46004 L 2,000mm, W 350 mm, w. 2 sides adjustable guide rails, height-adjustable base frame

Drill bits, twist drills, drill bits -Manufacturer: Maysso / Unisto / Hartner / Stock, Spiral drill bits 6 pieces Ø 51 - 70 mm -Type: Two-flute end mill, MK5 chuck with flat drill tip -Size/Quantity: see photo parts list -Price/Fee: complete -on request: various sizes/quantities available from further stock -Transport dimensions: 345/270/H100 mm -Weight: 23.7 kg

General SKU030H114 LocationBarneveld MakeVoegele TypePDK 8-12 No.713254 Main Features MaterialStainless steel Motor7.4 KW Width100 mm Specified Features - Sieve granulator Grater(1x) Sieve sizes2x200x100mm With hopper500x320x700mm Motor7,4Kw.380/660Volt MaterialStainless steel Information Year of construction1965 Floor space1,8x0,8M Total height1,9M Weight700 Kg Extra Specifications2 Conveyor/breaking axes Technical specs Extra informationsieve 2x20-0x100 mmDiscountSieve granulatorsVoegeleDiscountSieves > Sieve granulatorsBrand > Voegele What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU011U240 MakeHanag AG Oberwil No.111094 Year of construction1995 LocationBarneveld Pressure Working pressure16 Bar Vacuum possiblecheck Working pressure jacket16 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume3560 Ltr. Pressure16 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4435 (316L) Capacity3560 Ltr Vessel sizesdia. 1200x2600mm Dished topcheck Top connections4x dia. 80mm Outlet2x dia. 80mm + dia. 100mm + dia. 200mm Max. temperature-30/+120 Degr. C. Half coil jacketed(80 Ltr) Information Weight1900 KGDiscountPressure vesselsHanag OberwilDiscountTanks > Pressure vesselsBrand > Hanag Oberwil What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ar ...

General SKU011U177 MakePaul Schwingel No.8183-3 Year of construction1986 LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume23120 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Capacity23.120 l Vessel sizesdia. 2400 x 4000mm Dished topcheck Dished bottomcheck Manholedia. 600mm Top connections6x dia. 100mm + 2x dia. 150mm Outletdia. 150mm + dia. 100mm Max. temperature65 °C Information Floorspace2,8 x 2,8 m Total height5,5 m Weight4800 kgDiscountPressure vesselsPaul SchwingelDiscountTanks > Pressure vesselsBrand > Paul Schwingel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome  ...

General SKU098F495 MakeProvatech GmbH (Waldner) TypeVakuum Trockenschrank VTP 700/930 Ex Year of construction1997 LocationBarneveld Pressure Working pressure0.025 Bar Vacuum possiblecheck Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume260 Ltr. Surface1 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck (1.4571) Stainless steel trayscheck Mirror polished Heating surface1,0 m² Drying chamber capacity260 Ltr Drying chamber sizes700x445x930mm Max. temperature80°C. With jacket27 Ltr. Max. temperature80°C. Number of trays4 (+ bottom) Tray sizes500x400mm Distance between the trays150mm With 1 doorWith electric (water) heating Connection for the vacuum pumpcheck With vacuum pumpcheck make SIHI Motor± 0,25 KW MaterialStainless steel 1.4571 (316Ti) Information With switchcheck (as is) Floorspace1,9x1,2  ...

General SKU033H160 MakePannevis TypeRT 0,25 x 4,0 M Gastight No.1348 Year of construction1996 LocationBarneveld Dimensions Filter width25 cm Filter length400 cm Main Features MaterialHastelloy Motor11 KW Surface1 m2 Specified Features - Vacuum belt filter Vacuum belt filtercheck Filter surface1,0 m² Filter width250 mm Filter length4000 mm With motor0,75 KW, 400 Volt With variable speed drivecheck Knife dischargecheck With vacuum pumpcheck (2x), make Siemens and NASH Motor± 11,0 kW (Ex) With vacuum tankcheck With liquid pump(2x) make Bungartz (in Hastelloy C4) Motor4,6 kW + 1,85 kW MaterialStainless steel 1.4539 (904L), Stainless steel 2.4610 (Hastelloy C-4) Information With switchcheck With switchgearcheck Floorspace6,7 x 1,7 m (filter) Total height1,8 m Weight4500 kg Extra SpecificationsContact parts in Hastelloy C4 Remaining parts are stainless stee ...

General SKU123X722 MakePannevis TypeRT/PT 0,25 x 2 mtr No.1645 Year of construction1994 LocationBarneveld Dimensions Filter width25 cm Filter length200 cm Main Features MaterialStainless steel Motor0.25 KW Surface0.5 m2 Specified Features - Vacuum belt filter Vacuum belt filtercheck in pressure tight housing Filter surface0,5 m² Filter width250 mm Filter length2000 mm Number of sections:4 (3x 400 mm + 1x 800mm) With motor0,25 kW (400 V, (Ex)) With variable speed drivecheck Belt speed± 15-85 m/h Knife dischargecheck With vacuum pumpmake SIHI With liquid pumpcheck MaterialStainless steel 1.4571 (316Ti) Information With switchgearcheck Dim. 1,4x0,5x2,2 m Floorspacefilter 4,0 x 2,1 m Total height2,7 m Weight8000 kg ATEX compatiblecheck Extra Specifications- Housing vac/6 bar, - Test pressure 11,7 bar DiscountVacuum belt filtersPannevisDiscountFilters > Vac ...

General SKU057H233 MakeVötsch Industrietechnik Balingen TypeVHT 65/50 Year of construction1997 Mounted on framecheck Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure trays6 Bar Main Features MaterialStainless steel Volume266 Ltr. Surface1.3 m2 Specified Features - Tray dryer Tray dryer(1x) Stainless steel trays(1.4571) Heating surface1,25 m2 Drying chamber capacity266 Ltr Drying chamber sizes655x735x545mm Max. temperature95 Degr. C. Number of trays3 Tray sizes645x645mm Distance between the trays135mm Tray capacity3x 7,5 Ltr With containers(3x) Container sizes630x630x50mm With 1 doorcheck MaterialStainless steel Information LocationBarneveld Floorspace1,2x1,2 M Total height1,7 M Weight630 KG CEcheckDiscountTray dryersVötschDiscountDryers > Tray dryersBrand > Vötsch What you can expect from Foeth: -- Machine is in working condition  ...

General SKU082C465 MakeEisen- und Hüttenwerke Thale AG No.60 6731 Year of construction1996 LocationBarneveld Material Lining materialGlass - Enamel Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume2350 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel Capacity2350 Ltr Vessel sizesdia. 1400x1200mm Dished topcheck Dished bottomcheck Manholedia. 500mm Top connections(5x) Outletdia. 80mm Max. temperature200 Degr. C. With jacket(300 Ltr) Information Floorspace1,6x1,6 M Total height2,5 M -- VESSEL HAS NEVER BEEN USED -- Weight2150 KGDiscountPressure vesselsThaleDiscountTanks > Pressure vesselsBrand > Thale What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Rea ...

General SKU065Y550 MakeFIB Leeuwarden No.1326-05 Year of construction1982 LocationBarneveld Pressure Working pressure5 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1200 Ltr. Pressure5 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4401 (316) Capacity1200 Ltr Vessel sizesdia. 1000x1100mm Dished topcheck Dished bottomcheck Manhole/hand hole dia. 200mm Top connections4x dia. 25mm + dia. 65mm Outletdia. 80mm Max. temperature100 Degr. C. With paddle stirrermake Veenstra, type FR-200 Motor2,0 KW, 220/380 Volt (Ex) With variable speed drivecheck Information Floorspace1,5x1,5 M Total height3,3 M ATEX compatiblecheckDiscountPressure vesselsFib LeeuwardenDiscountTanks > Pressure vesselsBrand > Fib Leeuwarden What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...

CONTROLS   CNC controls WORKING RANGE -WIRE CUTTING-   X-axis travel: 500 mm   Y-axis travel: 350 mm   z-axis travel (vertical): 426 mm   conical operation for max.: 30 °   U-axis travel: 140 mm   V-axis travel: 140 mm WIRE SYSTEM   wire diameter (min): 0.15 mm   wire diameter (max): 0.33 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1940 mm   space requirements -front/back-: 2300 mm   total height: 2600 mm   total weight approx.: 4200 kg

turning diameter over bed: 630-640 mm turning diameter over slide rest: ca 380 mm turning length: ca 2000-4000 mm total power requirement: 15 kW weight of the machine ca.: 7-8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 2000 mm turning height: 1800 mm Control: Siemens Sinumerik 840 Dsl turning speeds range: 2,8-315 U/min cross rail adjustment - vertical: 1200 mm cross rail adjustment - horizontal: +/- 1150 mm : 1500 mm bit feeder section: 240 x 240 mm Minimum immersion diameter: 340 mm cutting capacity: 50 kN max. torque on the faceplate: 50000 Nm speed range step 1: 2,8 - 80 U/min speed range step 2: 12 - 315 U/min Max. clamping weight: 12000 Kg power capacity faceplate: 105 kW weight of the machine ca.: 33 t dimensions of the machine ca.: 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min, 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chi ...

Code: 0351 Brand: VOLPATO Model: LS - 1N - CE Standard Automatic edge sanding machine for edges and profiles in wood, solid wood, veneer, painted and various materials - CE Standard Technical data Max working height mm 110 Min working length mm 100 Variable-speed belt feed 5–30 m/min – Motor Kw 1,5 Tilting oscillating sanding unit – 2-speed motor 700–1400 rpm – Power 2 Hp Pneumatic belt tensioner – Timed entry and exit of the pad Mechanical oscillation of abrasive belt 0/20 mm Lifting and tilting via handwheel with special key Removable support for large panels Abrasive belt dimensions 80 x 2450 mm Suction inlet diameter 100 mm Compressed air 5–6 atm Overall dimensions mm 2600 x 1400 x 1500 h Weight kg 720

Tilting frying pan VAU, approx. 60 litres capacity, electrically heated, appliance in stainless steel, pan bottom in cast iron, Connection 400V, dimensions pan approx. 73x42x20cm, Total dimensions WxDxH approx. 80x85x87cm, weight approx. 115kg, good used condition, fully functional

Key data: 75 KW, 80 kVA, 400 V

Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas power and heat generator from 2013 with unknown operating hours, control with missing parts. 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial Number: 7411148 3 02168 101 Engine: MAN E0836 E302 Power [KW]: 75 Power [KWel]: 70 Year of Make: 2013 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 340 x 90 x 180 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 302845/2 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2013

Key data: 997 KW, 1222 kVA, 400 V

For sale is a used gas generator of the brand Gastechnik with Deutz MWM TBG 620 V16 engine with accessories. The accessories consist of: 4 control cabinets. Gas line. Heat exchanger. Electric pump etc. Power: 1222 kVA / 997 kW Year of Make: 1998 Nominal voltage: 400/231 V Frequency: 50 Hz COS φ: 0.8 Generator: Stamford HC.1734F2-CG (Newage) Weight: approx. 10,000 kg

Key data: 70 KW, 80 kVA, 400 V

Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas electricity and heat generator from 2013 with 58,278 operating hours. 1 available 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial Number: 7411148 3 02060 108 Engine: MAN E0836 E302 Power [KW]: 75 Power [KWel]: 70 Year of Make: 2013 Hours: 58,278 Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 340 x 90 x 180 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 299161/1 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2013

Verbruggen Satay Skewering Machine – 2021 – As New Condition, For sale: Verbruggen Satay Skewering Machine (Traditional Satay Unit), manufactured in 2021 and presented in as new condition. A high-quality machine designed for the automatic skewering of meat, fish, tofu, vegetables, or fruit onto sticks, ideal for food producers looking to increase efficiency while maintaining an artisanal product appearance., This versatile standalone unit is easy to adapt to different products thanks to its quick-change forming plates and adjustable stick lengths. Built for reliability, simple operation, and easy cleaning., Key Features:, - Year of manufacture: 2021, - Condition: As new, - Suitable for meat, poultry, fish, tofu, vegetables, fruit, - Fast changeover between products, - Adjustable for various stick lengths, - Consistent, high-quality production output, - Hygienic and easy to clean, - R ...

Casemaker DE Pack QYKM-1400x2900, Year 2023, Max.Size: 1400x2600 mm, Skip feeding area: 2180x4000 mm, Min.Size: 350x750 mm, Max.Speed: 200 pcs/min., 4 Color Flexo, Rotary Diecutting, vibration, Stacker

Bobst SPO 1575 + 2 Color Flexo Printing Unit, Jahr 1994, Max.Size: 1575x1075 mm, Min.Size: 600x400 mm, Max.Speed: 4500 Sh/h, Max.Cutting force: 350 t, Flexo Printing Unit year 1974

TOSI VERONA, Max. Size: 1200x1800 mm, Min. Size: 400x400 mm, in production, Location: Germany

Martin Miniline 616, - Vacuum feeders, - Max.Speed: 24,000 Sh/h, - Max.Size: 600x1600 mm, - Year 1974/1991, - 2 Color Flexo, - Slotter, - Rotary die cutting, - Folding gluing, - Counter Ejector, Year 1991

MHI Singlefacer Model 50C, Size: 2500 mm, Max. Working Press: 200 psi, Year: 1984, C-Flute = overhould, in Production

Build Volume 200 x 250 x 330 mm (7.9 x 9.8 x 13.0 in) Laser Type CO₂; 1 x 30 W Presicion Optics 1 F-theta-lens(es); 1 High-speed scanner(s) Scan Speed up to 5.0 m/s (16.4 ft/s) Power Supply 1 x 16 A Power Consumption max. 5.0 kW / typical 3.0 kW Machine Dimensions 1320 x 1067 x 2204 mm (52.0 x 42.0 x 86.8 in) Recommended Installation Space min. 3200 x 3500 x 3000 mm (126.0 x 137.8 x 118.1 in) Weight approx. 600 kg (1323 lbs) Software EOS SYSTEM SUITE   Materials & Processes EOS has extremely high materials expertise and a comprehensive portfolio of highly developed polymer materials for additive manufacturing. Our materials, systems and process parameters fit together optimally. With the right materials, you can realize the target property profiles in the best possible way for your products.  Explore below which polymer materials and processes are compat ...

pressure: 50 t chamfer lenght: 1550 mm distance between columns: 1150 mm Control: CYBELEC DNC 1200 PS Eco column arm: 405 mm table height: 900 mm stroke of ram: 400 mm distance between table / ram: 720 mm total power requirement: 9,5 kW weight of the machine ca.: 5.200 kg dimensions of the machine ca.: 2000x1900x2920 mm Accessories/Equipment: - CYBELEC DNC 1200 PS Eco controller - 2 support arms - 4 stop fingers - Lasersafe - Foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Okta 6000 - New und with Motor Okta 1000 - neu without Motor 1. Pfeiffer Vacuum Okta 6000The Pfeiffer Vacuum Okta 6000 is a Roots vacuum pump (also known as a Roots blower or vacuum booster). It is designed for industrial applications that require high pumping speeds in low and medium vacuum ranges.Primary Function: It acts as a "booster" to increase the pumping speed of a vacuum system, usually paired with a backing pump (like a rotary vane or screw pump).Performance: It has a nominal pumping speed of approximately 6,000 to 7,300 m³/h. Find more here - / Contact us at -

pressure: 170 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke: 400 mm weight of the machine ca.: 15.300 kg dimensions of the machine ca.: m Machine: - Sturdy machine frame - Press beam - Spherical bearing for the press beam with press beam tilt - Electro-hydraulic top drive - Block hydraulic system - Length measuring system (Y-axis) with dynamic spring compensation - Control cabinet air conditioning unit - Adapter strip for tool mounting - 2 stop fingers Optional equipment: - 2-axis backgauge (XM/XS, R) - 1 sheet metal holding device 200 daN CNC - 2 x additional stop fingers 2/4-axis - 1 x pneumatic upper tool clamping 26 mm - 1 x pneumatic lower tool clamping 55 mm - 1 x lower tool shift EHT pneumatic - 1 x CNC crowning device 3000 kN/m - 1 x Operator Safety Guard PILZ PSENvip Productive - 2 x Bending aid 1500 N - 1 x Support strips for bending aid - 1 x Parking posit ...

CNC vertical machining center Type: VMC 1300 S Manufacturer: Richmond Year: 2006 Control: Fanuc Series 21i-MB Hours: 28000 X: 1300 mm Y: 700 mm Z: 700 mm Table: 1400 x 610 mm Machine weight: 7200 kg Chip conveyor Machine in good condition, fully functional, under power Find more here - / Contact us at -

Excellent condition - Fully operational - Loading / Transport possible! VENTURE 08M CNC - controlled machining center in moving gantry design travels of the axes: X = 3930 mm Y = 1953 mm Z = 300 mm working table: X = 3100 mm (length) Y = 1250 mm (width) Z = 100 mm (thickness) 50 mm (passage height without vacuum cups) CONFIGURATION: V12, H4X/2Y, N1 X-Y 90°, F1-HSK63-9KW, C-AXIS, W8 REAR, W8 SIDE V12 HIGH SPEED 7500 incl. quick change system and spindle clamping Vertical drilling unit (individually controllable with variable speed range). Spindle clamping for safe achievement of drilling depth. F1-HSK63-9 KW Automatic tool change spindle in combination with lateral tool change magazine. Tool holder: HSK63 Tool retraction: automatic Direction of rotation: right/left Speed: 1,250 - 24,000 1/min infinitely programmable C-AXIS AGGREGATE INTERFACE W8 REAR Automatic tool change  ...

Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2023 Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l

Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Manufacturer: SISU Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Weight: 1200 kg self-starting water cooling built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur.

Case Erector BEDO VA988 + Year of construction 1997 Machine no. VA 988.1.52490, serial no. 4705 Output: 20 cart./min. with automatic format change. format range: L 200-650mm W 150-460mm H 100-500mm. Carton outlet height: 600 mm Electrical data: Voltage: 400V 3 phase Frequency: 50Hz Connected load: 7.3 kVA 18 amps Operating pressure: 5-7 bar The machine is equipped with a PLC control make Siemens S 5. Machine weight: 1,500 kg machine dimensions: Length: 3000mm Depth including cardboard magazine: 2100 mm Height : 2100mm Machine weight: 1,500 kg Bottom closure with NORDSON 3400 hot-melt device. If you need more information. We are here to help! Please contact us using the contact form or give us a call

For sale is a high-quality lead and pull spindle lathe from the renowned German manufacturer Weiler, model Condor VS 1. The machine convinces with its high precision, robust construction and durability and is in a very well-maintained and technically perfect condition. Ideally suited for the workshop, single part production and precise turning work. General information: Machine Type: Lead and Pull Spindle Lathe Manufacturer: Weiler Model: Condor VS 1 Year of construction: approx. 1977 Condition: Well maintained, technically perfect Availability: Immediately available Technical data: Max. turning diameter over bed: approx. Ø 330 mm Max. turning diameter via support: approx. Ø 170 mm Max. turning length: approx. 800 mm Bar passage: approx. Ø 38 mm Spindle: Speed range: approx. 24 – 2,800 rpm Feed & Thread: Feed range: approx. 0.037 – 1.253 mm/rev  ...

General SKU249Y200 LocationBarneveld CEcheck Pressure Working pressure0.4 Bar Vacuum possiblecheck Working pressure trays3.5 Bar Main Features MaterialStainless steel Volume305 Ltr. Surface1.5 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface1,5 m² Drying chamber capacity305 l Max. temperature95 °C Number of trays7 Tray sizes510 x 500 mm Distance between the trays50 mm Max. temperature95 °C With 1 doorcheck Connection for the vacuum pumpcheck With vacuum pumpcheck Leybold Motor0,55 kW (380 V, 1350 rpm) MaterialStainless steel 1.4435 (316L) Information MakeDe Lama Serial0218 Magento base g_extra_specifications1.5m3 drying surface, capcity chamber 305 Ltr, plates 30. 95degr.C. -1 / 3.5 bar Information TypeDLDR/V Year of construction2003 With switchgearcheck (as is) Floorspace1, ...

Overview This complete brewing equipment is mainly from 2014 and is becoming available because the company is closed. The equipment is already dismantled and stored properly. Scope  Water Softener Compressor | Josval Sauber 240 D Mill | Robix ROPPI 250 Thermindus Boiler Ps(Barg 6) PL (Barg 10.4) Ts Max 165, Ts min 10, kW 34 Portable Pump 2.20kw INOX Hoses, cones, keys Manual Isobaric Bottling Machine 4 spouts Automatic Labeler | Arca L10-8128 2x Rotating Table with Regulator 100cm Diameter, for input and output of bottles or cans Videojet 1220 Batch Coder Infrico Undercounter Refrigerator with 3 Doors Brewhouse | Spadoni | MBS 600 VAP | 2014 Spadoni 600, Masher 680 Liters, Bottom Filter, Rotating Blades, Transfer and Recirculation Pump Boiler 720lt with Whirlpool, with Boiler Pump and Spadoni Plate Cooler Hot Water Tank | Spadoni | 10hl Cold Water Tank | Spadoni | 10hl Mixing Tanks | Sp ...

Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible.

Chuck diameter: 315mm, turning length: 1600mm, swing over bed: 560mm, swing over cross slide: 370mm, control panel: Heidenhain. An on-site inspection is possible.

Chuck diameter: 400mm, turning length: 1000mm, swing over bed: 700mm, swing over cross slide: 400mm, control panel: TRAK 102. An on-site inspection is possible.

Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 560mm, swing over cross slide: 320mm, control panel: Heidenhain. An on-site inspection is possible.

Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible.

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

Offer 26128 Technical data: - Max. load capacity in horizontal position 5000 kg - Face plate diameter 1150 mm - Face plate motorized swivel 0 - 130 ° - Rotary movement electr. Infinitely variable - Right + Counterclockwise - Welding current transmission approx. 500 A - Drive 400 V - Table height in horizontal position approx. 1220 mm - Handheld remote control - Space requirement approx. W 1350 x H 1220 x D 1900 mm - Weight approx. 3500 kg - Adapter plate with clamping device for round material