delta v used for sale

Key data: 2000 KW, 2850 kVA, 400 V

MWM TCG 2020 V20 Containerized! 2000 kw 2850 kva 400volt 50hz 1500 rpm hours: 19.602 running hours. Engine Block manufacture year: 2018 Located in our yard: Kranenpool 10 6443VA Brunssum Netherlands General Power Holland BV Kranenpool 10 6443VA Brunssum Netherlands +31681163153

Suitable for automatic, double-sided grinding of tooth flanks on circular saw blades with carbide tips., Accessories:, Partial enclosure,, 1 sawblade holder,, Coolant system., Circular saw outer diameter: 260 to 2200 mm, Circular saw bore diameter: 25 to 220 mm, sawblade thickness: up to 20 mm, Tooth pitch: from 10 mm, rake angle: any, Radial free angle: up to 6°, Tangential free angle: up to 6°, Grinding path: up to 75 mm, Grinding speed: 0.5 to 6 mm(s), Working speed: up to about 10 teeth/min, Grinding wheel diameter: 125 mm, Grinding wheel bore diameter: 32 mm, Grinding wheel peripheral speed: 26 m/s, Cooling lubricant pump capacity: 250 l/min, Coolant Tank Content: approx. 190 l, Connected load approx.: 6,5 kW (400 V / 50 Hz), Dimensions W x D x H =: 3050 x 1890 x 2050 mm, Weight approx.: 2160 kg, colour: green

Manufacturer: IMET Model: Velox 350 AF-ENC Year of Manufacture: 2017 Type of Machine : Circular Cold Saw Operating hours: 5,500 Blade diameter: 350 mm Blade arbor: 22 mm Blade speed: 3,600 rpm Feed travel: 520 mm, multiple passes Control: Electronic feed control (ENC) with front panel programming Condition: Used, fully functional Included Accessories - Extraction unit included - 6-metre roller conveyor for long profiles included Find more here - / Contact us at -

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Big Bag emptying station with dedusting and dosing conveyor screw.

Planetary mixer Varimixer Bear AR60/VL1 Bj.2016 - Planetary mixer / planetary mixer - Manufacturer: Varimixer Bear - Model: AR60/VL1 - with a 60 litre boiler - Incl. whisk, flat beater and dough hook - With plastic protective cover with circuit breaker - Analog control Technical data: - Year of construction 2016 - Voltage: 400 volts - Motor: 1.9kW - Plug: 1x 16A plug More pictures and information as well as transport on request.

Key data: 3000 mm, 800 mm, 720 mm

Control: Smooth X Travels X-axis: 3,000 mm Y-axis: 800 mm Z-axis: 720 mm B-axis: 220° C-axis: 360° Table Table: 3,500 mm x 820 mm Max. table load: 2,500 kg Milling spindle Drive power: 35 kW Max. spindle speed: 18,000 rpm SK-40 Tool magazine Number of tool positions: 48 Special accessories Additional work area light Tool magazine with 48 tool positions Rotary table diameter: 500 mm Chip conveyor Mayfran, ejection High-pressure pump 15 bar incl. gap filter Synch. Threading Rapid traverse constant angle of inclination Ethernet Operation Function Cylinder interpolation Hours Switch-on time: approx. 12,000 hours Spindle hours: approx. 4,500 hours

Dispermate Manufacturer: Getzmann VMA Type AE-6-M Serial No. 080 50001 Equipped with APS 3000 grinding system Tank 10 bar/-1 bar, interior capacity 3000 ml, operating temperature 200 °C Double jacket 10 bar/-1 bar, operating temperature 200 °C Power 2.2 kW, 400 V, 0-6,000 rpm GMP-compliant design Was used in the pharmaceutical sector for grinding carmine.

B&A REF: 9275 TON: 200 SCREW DIAMETER: 55MM SHOT WEIGHT: 451 STROKE VOLUME: 475CM3 INJECTION PRESSURE: 1741AR PLATEN SIZES: 780 X 780MM DBTB: 530 X 530MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 440MM MAX DAYLIGHT: 940MM EJECTOR STROKE: 130MM CONTROLS: VPC 20000E AIR VALVES: 1 HEATING CAPACITY: 12.9KW

For sale is a production cell consisting of: 1 x MAZAK VARIAXIS i-800 1 x MAZAK VC PRIMOS 400 L 1 x CELLRO ELEVATE with FANUC R-2000-165 Robot Year of construction 10-2020 Commissioning 2021 MAZAK VARIAXIS i-800 5-axis machining center Smooth X control Pallet changer, 2 pallets 5-axis simultaneous machining Travels: X-axis: 730 mm Y-axis: 800 mm Z-axis: 560 mm A-axis: -120° to +30° C-axis: +-360° Max. spindle speed 10,000 rpm SK-50 mount, -Tool magazine for 120 tools -Preparation for hydraulic clamping incl. clamping function pallet -Automatic pallet changer -Electronic handwheel -Knoll coolant system KF400/2300 -Paper belt filter -High pressure pump 70 bar -Knoll chip conveyor -Renishaw NC4 Laser -Air blowing on the NC4 laser -Mazak Monitoring B, incl. Renishaw RMP600 button - Tool Breakage Monitoring (TBR) & Mazak Monitoring System (MMS) EIA/ISO  ...

Code: 0342 Brand: VITAP Model: ALFA 35 - CE Standard Semi-automatic multiple boring machine with 35 spindles for furniture, kitchens, bathroom furniture, custom-made furniture, panels - CE Standard Technical data N° 35 spindles with quick coupling Centre distance between each spindle mm 32 Centre distance between first and last spindle mm 1088 Max depth of hole mm 70 Board dimensions mm 1330 x 500 Spindle rotations per minute 2800 Motor power Hp 3 Turret with 6 different depth positions Side fence Horizontal/vertical 45 degree pneumatic tilting head Metric bar 3000 mm with stops Operating pressure 6- 8 atm Overall dimensions mm 1590 x 860 x 1250 h Weight kg 454

Condition Used Brand VEM Type ZG3 MR A112 M4 Voltage Volt 3 fase 380 volt 400 volt Force KW 5,5 KW Rotational speed RPM 315 RPM Shaft size mm 48 mm Flens pasrand 180 mm Length 70.00cm Width 24.00cm Height 32.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

SB Sales Shelf 950 with lighting 4 beech wood grates 12 Removal flaps bottom with shelf Connection 220V Used device

Awaiting refurbishment at our headquarters in Northamptonshire is this Engel VC500/120 injection moulding machine with double pneumatic and single hydraulic core pull. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Inc ...

Bear Varimixer R 60 Stirring Machine Blowing Machine Kneading Machine Manufacturer : Bear Varimixer Type : R 60 Accessories: 60 litre stirring bowl, whisk, stirrer, dough hook Description R 60 Powerful stirring, beating and kneading machine for professional use. See pictures for details.

Bread roll line Eberhardt Vario-Stars / Primo-Starâ Product descriptionâœ" Manufacturer: Eberhardtâœ" Type: Vario-Star / Primo-Starâœ" Condition: used, Bakery condition

Bread press VEB Habämfa â Product description âœ" Manufacturer: VEB “Habämfa âœ" Condition: used, bakery condition, not checked For details see pictures.  

The VITO 30 cleans your frying oil while providing a simple and hygienic filtration solution for the kitchen. Like every VITO frying oil filter, the VITO 30 also filters microparticles up to 5 Âμm from the oil or grease. This preserves the optimal quality of your oil and fried food. The special design of the VITO 30 ensures that it can filter easily at temperatures up to 200°C and offers the highest level of occupational safety. After filtration, the oil can be used again immediately. Advantages:great savings potentialOptimal qualityLess

Alexanderwerk Varimixer AR 100 E Stirring / Whipping Machine 100 L Product description Manufacturer: Varimixer BEAR Type: AR 100 E Year of construction: 1999 Condition: used, functional, baker's condition Stirring, beating and kneading dough, meat and frothy masses Stepless speed adjustment Connected load: 400 V, 3.0 kW Dimensions: W.: 70 cm, D.: 120 cm, H.: 160 cm For details see pictures.

Bread weigher Lippelt Manufacture : Lippelt Model : V15 Year of construction : 2003 3x400 Volt , 50 Hz , 1.9 kWÂ 550 Kg stainless steel , paint on rollers Details see picture

Rego Vario stop machine Product description Manufacturer: Rego Herlitzius GmbH Type: Vario Condition: used, cleaned, tested Year of manufacture: 2007 Material: Stainless steel Digital control Incl. stainless steel boiler 40 L and whisk Connected loads: 3 - 400 V / 50 Hz Power: 3.2 kW See pictures for details.

- Tooling holders included - Live driven Axiaal tools included  - Live driven Radial tools included - Chip conveyor - Tool eye arm - Motorized Tailstock - 3 chuck 400 mm with extra2008 jaws

Manufacturer: EFI Model: VUTEk h5 Year of Manufacture: 2022.Installed spring 2023 - Upgraded to a VUTEk h5+, 1,5-2 years later. Type of Machine : UV LED inkjet printer Weight: 7495 lbs / 3400 kg Pneumatics: 120 / 8.27 PSI/BARS Power: 400-480 VAC, 30A, 60/60 Hz, 3 Wire WYE 3P+E Certified: ETL US, CE, CSA Options: - 2 tables - 1 Semi-automatic feeder solution (not connected) - EFI Fiery RIP - RtR - Marabu ink (3 parts ink) Find more here - / Contact us at -

A total of five identical Vestas wind turbines are expected to be available from early 2027. Rated power: 850kW, rotor area: 2124m², rotor blades: 3, rated speed: 26rpm, generator voltage: 690V, gearbox stages: 3, cut-in wind speed: 4m/s, rated wind speed: 16m/s, cut-out wind speed: 25m/s, tower material: steel, hub height: 74m, nacelle weight: 22t, rotor weight: 10t. Documentation available. An on-site inspection is possible. Individual sale possible.

Used a fully functional and complete production line for bottling still and sparkling mineral water. The line consists of the following equipment: 1. SAMETO EBH 2050 101321ST PREFORM TILTER 2010 2. SIDEL SBO10 BLOW MOLDING MACHINE 2011 3. ALSIM AIR CONVEYOR 1999 4. ALSIM ASMOJET FILLER/RINSE/CAPPER 1999 5. ALSIM MAS-MIX 30/PC MIXER WITH CARBONATOR 1999 6. ALSIM BOTTLE CONVEYOR FOR FILLED BOTTLES 1999 7. ACI BOTTLE DRYER 15kW 2015 8. KRONES CONTIROLL K745G19 LABELING MACHINE 2004 9. ACMI FENIX C9332 SHRINK TUNNEL 2019 10. ALSIM PACKS CONVEYOR 1999 11. SMIPACK HA35-50-70 HANDLING MACHINE 2002 12. ALSIM VALIANT 1I 1P PALLETIZER 1999 13. OBS ROTOMATIC STANDARD PALLET WRAPPER #1 2009 14. OBS ROTOMATIC STANDARD PALLET WRAPPER #2 2009

CODIMAG VIVA 340 mm Waterless Year 2001 max. width: 330mm 5 offset units waterless 1 hot foilstamping unit 1 varnishing unit 6 IST UV dryers Kocher &, Beck GapMaster Rewinder/ Unwinder Waste rewinder Inline slitter Corona pretreatment BST Web inspection

OMEGA SR 330 mm ABG TR2/4 TURRET REWINDER Age: 10/ 1998, Serial Number: 10980110 Web width: 330mm Max roll diameter with 4 rewind shafts: 260mm Max roll diameter with 2 rewind shafts: 355mm Counter: Feet, Labels or Meters Control panel with tension control, temperature control, glue timer and programming Auto roll eject

Automatic Textile Printing Machine Type: VERSATRONIC S-line Manufacturer: Hebbecker Year: 2022 Configuration: 8 stations/pallets 6 printing heads Maximum print area: 400 x 450 mm Pallet drive: frequency-controlled AC servo drive Squeegee-drive system: AC servo high-precision drive 4-cylinder POWER-Squeegee system Main Control Unit: Rotatable control panel with 7” SMART touch display Microprocessor with diagnostic program Printing Programs: 6 standard printing programs High-density program MULTIFLASH program Cool-stop mode Sampling program Start-up/finishing program Screen-Cleaning mode, stopping pallets between print stations Free-wheel-mode Accessories 8 pcs aluminum sandwich pallets 420 x 500 mm with neck 8 pcs aluminum sandwich pallets 320 x 500 mm with neck 8 pcs aluminum sandwich pallets 230 x 500 mm with neck 8 pcs aluminum sandwich pallets 130 x 500 mm ...

- Division Count: The "15" in the model name indicates it divides a batch of dough into 15 equal portions. Find more here - / Contact us at -

Model: VVM2 Condition: Used Serial Number: 2043114-1 Stock Number: 2765J Flow divider 2 lane Belt width: 270 mm Power: 3 x 400V, 50Hz, 16A Dimensions; 1750 x 1350 x 1900 mm

Vehicle data: Make: Volvo, Type: TAD871VE, Year: 2016, Operating hours: 4932, Internal No.: DIV1372, Mast data: Dimensions: Battery & charger: Description & Special equipment: Attachments: Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description: In addition to this MAKE - MODEL, we have about 150 heavy-duty forklifts, container handlers, reach stackers, forklifts & terminal tractors in our warehouse in Oldenburg. Visit our homepage -

VOUMARD Model: CNC 300 Condition: Excellent Year: 2007 Machine type: BU 1000 T L7400 Was recently removed from power due to routine upgrades and was making good parts with full functionality. Siemens 840D CNC Control. Manuals included. Has grinding capability for: Internal diameters External diameters Front faces Back faces Internal tapers External tapers Profiles Drive spigots Face keyways Cams Bilobes and trilobes Internal threads External threads Bearing tracks Travels Display .0001degrees or .0001mm A - 360 degrees - 34 t/min B - -20/+1 degrees - 240 degree/min C- 360 degrees - 500 t/min U- 300mm - 20 m/min X - 300mm - 20 m/min Z travel - 1000mm - 20 m/min 4 position turret Workhead Through Bore - 50mm Rotation Speed - 850 Max workpiece weight - 200 daN at 100 mm from flange Taper - metric 70 Weight - 8000kg

Table dimensions X/Y: 900mm/350mm, magnet dimensions X/Y: 600mm/350mm, max. workpiece height: 375mm, max. table load: 300kg. Machine dimensions X/Y/Z: 3200mm/2600mm/2400mm, weight: approx. 400kg. Documentation available. An on-site inspection is possible.

A hydraulic transfer molding press Lauffer is available. Press force: 125t, power: 15kW, hydraulic oil volume: 300l, machine dimensions X/Y/Z: approx. 2200mm/1400mm/3000mm, weight: approx. 6500kg. An on-site inspection is possible.

A continuous glass capping machine VTB with gas flushing for twist-off lids is available. Glass volume: 225ml/380ml, capping capacity: 10-60lids/min, product material: stainless steel 1.4301, machine dimensions X/Y/Z: approx. 3000mm/1000mm/2300mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Expected to be available August 2026.

Model: Backsaver ST Year: 1999 Condition: Used Serial Number: 990216-3 Stock Number: 3253 Tipping height: 980 mm With rechargable battery and CTEK MXS 7.0 charger Tipping angle: 0 - 90° Working load: max 900 kg Container: 1000 x 1200 x 800 mm Power: 1Ph, 230VAC, 50Hz Dimensions 1400 x 1350 x 1150 mm Weight: 300 kg

Alteco 1000 Liter tank Pressure vessel 11 bar

Atlas-Copco 1500 liter tank pressure vessel

Compressor: 13 bar Dryer Atlas-Copco FD220 14 bar Volume flow rate: 8.52 m3/min Power imput: 50 kW

ITEM NO. DOS-JT-43 - with dosing container 75 litre capacity - Flow rate of the HB43 metering pump 120 ltr./h - With connection fittings that enable "driving in a circuit" - With bag rack - All threaded connections DN 40 DIN 11851 - 1 year functional warranty

straight through inlet wire diameter 2,5 mm finished wire diamter 0,8 mm number of drafts 8 diameter of capstan 400 mm speed -meters/sek 15 m

Paper counting machine Vacuumatic Vicount E; cleaned and tested; Paper weight 25-240g/m2; strip bullet hole; Counting speed 500-2000/min.; max. Stacking height 230mm; Table size 600x400mm. Paper counting machine Vacuumatic Vicount E; cleaned and checked; paper weight 25-240g/m2; tabbing; Speed 500-2000 rpm; max.pile hight 230mm; table size 600x400mm.

Key data: 10 t

Various spare parts for eccentric press - brands SMERAL and VSS KOSICE

Used homogenizer from Fryma type VME 10. Capacity 10 liters. The mixer has a heating/cooling jacket.

General SKU437X1383 LocationBarneveld Pressure Working pressure shell45 Bar Vacuum possible shellcheck Working pressure tubes25 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface30 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4541 (321) Heat exchangercheck Horizontalcheck Heating surface30 m² Tube capacity190 l. Number of tubes:40 Tube diameter25 mm Tube length10 600 mm Wall thickness tubes2 mm Max. temperature250 Shell capacity420 l. Shell diameter400 mm Shell length6 400 mm Max. temperature250 Shell connectionsDN80 Cover connectionsDN80 Information MakeK.ley Eiterfeld Serial5654 Magento base g_extra_specificationsPressure -1/25 bar, volume 190 l., allowable temperature 250°C, jacket volume 420 l., pressure -1/45 bar, 30 m2, own weight 1800 kg, drawin ...

General SKU206Y009 LocationBarneveld CEcheck Specified Features - Paddle dryer Paddle dryercheck Continuouscheck Capacitybruto: 3770 l. Trough sizesø 895 x 6000 mm Inlet250 x 250 mm Outlet470 x 230 mm With jacketcheck Motor37 kW 400 V 1475/219 rpm Information MakeVomm Milano Serial875A - 341/98 TypeTM/ES-900 L / Item ES1 Year of construction1998 Mounted on framecheck Floorspace6,6 x 1 m Total height2,1 m Extra SpecificationsWith a screw feeder / screw dosing unit with hopper: 680 × 680 × 680 mm: approx. 350 l: 2x blowers: heat exchanger.Paddle dryersNew arrivalsVomm MilanoDryers > Paddle dryersNew arrivalsBrand > Vomm Milano What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit  ...

Used Van Dam 568 , 8-Color Cup Printing Line :-, Auto Elevator Tray Feeder, Cross conveyor, Cup Stack feeder to Main Print Unit, Universal Screw Denester, Corona Pretreater with Leak Tester, Main 8-Color Print unit., Each Print head consisting of : 8 x precision ground rollers., 2 x Form Rollers, 2 x Oscillating Rollers - water cooler. Gear driven Fountain Rollers., All eight heads swing open for easy plate mounting and free roller accessibility., Easy axial and peripheral fine register adjustment of the plate cylinder while the press is running., Speed continuously variable., UV-On Mandrel Curing Unit, Dual Timing Belt Take-Off, Counter/ Stacker Unit, with Ejector Tray, Max. Cup Rim dia. 150 mm. Max. Taper 10°. Max. Print height 150 mm. Max., PLC Controls. OPC with Touch Pad Controls and Color Display., Max. Production Speed 600 Cups/ min depending on Cup size & Shape

CONTROLS   CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 600 mm   Y-axis travel: 450 mm   Z-axis travel: 450 mm   rotating range B-axis from: -115 °   rotating range B-axis up to: 30 °   rotating range C-axis from: 0 °   rotating range C-axis up to: 360 ° TABLE   clamping surface diameter: 450 mm   workpiece load (max): 200 kg SPINDLE / HEAD   spindle revolutions (max): 20000 /min AXIS DRIVES   rapid traverse X: 22000 mm/min TOOL MAGAZINE   number of positions: 220 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4400 mm   space requirements -front/back-: 3400 mm   total height: 2700 mm   total weight approx.: 8000 kg ATTACHMENTS   digital display: yes   chip conveyor: yes   cool ...

turning diameter: 720 mm turning length: 3000 mm control: Siemens 805 turning diameter over slide: 430 mm turning speeds: 1800 U/min tailstock quill taper MT: 6 steady: 3 Stück main drive motor: 36 kW z-axis: 3050 mm x-axis: 410 mm swing diameter over slide rest: 430 mm spindle motor: 28 kW workpiece weight: 3000 kg spindle passage: 106 mm 3-jaw-chuck diameter: 305 mm chip conveyor: faceplate: mm total power requirement: . kW weight of the machine ca.: 6 t dimensions of the machine ca.: 4x2,4x2 m Steady rest 1: Diameter: 120-300 mm Steady rest 2: Diameter: 220-400 mm Steady rest 3: Diameter: 350-500 mm Chuck: Diameter: 315 mm Maximum workpiece weight: 3 t (with steady rest) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines  ...