delta v used for sale

pressure: 225 t chamfer lenght: 2050 mm distance between columns: 1550 mm control: CYBELEC DNC 1200 PS Eco stroke: 550 mm table height: 700 mm throat: 405 mm distance between table / ram: 320-870 mm column arm: 405 mm weight of the machine ca.: 14.000 kg Accessories / equipment: - controlled axes: Y1 - Y2 - X - R - Z1 and Z2 can be moved manually - Lasersafe angle measurement - Pneumatically adjustable support table - pneumatic upper and lower tool clamping - 2-hand foot control - manual crowning The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 820 mm turning diameter over slide rest: 575 mm turning length: 3300 mm centre height: 410 mm : mm spindle bore: 125 mm spindle turning speed range: 7,1 - 1400 U/min total power requirement: 22,0 kW weight of the machine ca.: 6,0 t dimensions of the machine ca.: 6,3 x 1,6 x 2,0 mm Lathes with: - Digital readout - Rapid traverse - Röhm 3-jaw chuck 315mm - 4-position tool post - 2 steady rests - Coolant system - Emergency stop device - Machine light - Chuck guard - 2 chip trays - Spare jaws (internal and external) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

50BBL/80HL conditioning/bright tanks MANUFACTURED BY BRABY YOM 1973 Test pressure 45PSI Working pressure 30PSI Vertical cylindrical single skin tanks . Side entry manway door and C.I.P Arm This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Offer 25498 Technical data: - Drilling capacity 50 mm - Tapping device up to M 40 mm - Tool holder MK 5 - Spindle stroke 280 mm - Spindle speeds 38 - 2000 rpm - 6 feed speeds 0.08 - 0.83 mm/rev - Drive 400 V / 5.5 kW - Radius min. / max. 350 / 1400 mm - Removal of spindle - machined base plates - min / max 350 / 1250 mm - Machined base plate with T-slots W 1650 x D 930 mm - electr. Central clamping - Coolant device + lighting - Dice table - Space requirement approx. W 2300 x H 2400 x D 1050 mm - Weight approx. 3500 kg

Offer 25501 Self-standing – movable / movable – column slewing crane Technical data approx.: - Load capacity 500 kg - E. chain hoist DEMAG DC – ComA 5 Bj.20 - Lifting speeds 4.5 + 1.1 m/min - Projection approx. 2000 mm - Crane girder IPE 180 - Hook height approx. 2400 mm - Swivel radius 360° - Chassis under pedestal bucket for moving the entire crane - Total height approx. 3100 mm - Stand area stand / bucket approx. 1050 x 1050 mm - Total length approx. 2600 mm - Dimensions with landing gear approx. 1400 x 1050 mm - Total weight approx. 3500 kg

40BBL/65HL Conditioning tank manufactured by DME Vertical cylindrical single skin tanks for use in a chilled room . Dimensions approx: Diameter 2200mm Overall height 3,700mm Tanks are stamped – Certified by Meuller Originally designed for 15PSI Side entry manway door and C.I.P Arm Working capacity is 40UKBBL/65HL with 11% head space This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Stainless Steel Vertical Cylindrical Tank 2000L. Single skin with side entry manway and top inspection port. Lifting eyes Sight level gauge. Sample Tap Racking point with valve. Bottom outlet with DIN40 butterfly valve. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

This HWACHEON VT550R was manufactured in 2008. It features a hydraulic chuck diameter of 500 mm, a maximum turning diameter of 650 mm, and a spindle speed up to 1,500 RPM. The machine includes a 12-position turret and a chip conveyor, ensuring efficient operation. Consider the opportunity to buy this HWACHEON VT550R turn-mill centre. Contact us for more information about this machine.

This 3-axis Citizen CINCOM A32-VII CL swiss type turning machine was manufactured in 2014. It features a main spindle with a 32 mm capacity, a counter spindle, and a maximum turning length of 3000 mm. Equipped with a high-speed CHIDOMI system, it supports simultaneous movements across all axes and offers a feed rate up to 9,000 mm/min. Consider the opportunity to buy this Citizen CINCOM A32-VII CL swiss type turning machine. Contact us for more information about this machine.

This 4-axis Citizen K16 VIP swiss type turning machine was manufactured in 2005. It features a max machining diameter of 16 mm, with spindle speeds up to 15,000 rpm on the main spindle and 10,000 rpm on the sub-spindle. Ideal for precision work, it supports a variety of tooling options. A great opportunity to buy this Citizen K16 VIP swiss type turning machine. For more information about this swiss type turning machine, please reach out to us.

This KELLENBERGER KEL VARIA RS 175/1000 Grinding machine was manufactured in the year 2004 in Switzerland. It is equipped with a HEIDENHAIN control unit.

This 3-axis VITAP K3 CNC Wood Machining Centre was manufactured in 2023. Consider the opportunity to buy this VITAP K3 CNC Wood Machining Centre. Contact us for more information.

This 3-axis Weeke Optimat BHP Vantage 24M was manufactured in 2011. A robust CNC processing center, it offers precision and efficiency for diverse machining tasks. Consider the opportunity to buy this Weeke Optimat BHP Vantage 24M CNC processing center. Contact us for more information.

This AMADA Vipros 255 was manufactured in 2001. It is a used punching and bending machine, ideal for those looking to enhance their metal fabrication capabilities. Contact us for more information about this machine.

- (dust-free operation, paint overspray collection system, stable spraying temperature, elevated drying temperature) Control box including advanced safety functions and operator-friendly software- (weather condition independent operation, elevated temperature in the drying phase)- (daylight-grade illumination, fire safety, efficient ventilation rendering operators individual respiratory protection equipment redundant)- Low operation cost : (reduced operating costs owing recirculation of warm air in the drying phase)- (efficient dust collection, low solvent vapor concentration, low air pollutant emission)- Limited operating area requirement : (minimized production area) 

turning diameter: 220 mm Control: GE Fanuc 18i-TB x-travel: 400 mm z-travel: 450 mm tool taper: VDI 40 number of tool places: 12 Pos. spindle tunring speed: 6.000 U/min Number of working hours: 10741 h work stroke: 150 mm X-Achse EMAG VL5 vertical lathe, built in 2003, very good condition, ready for use, but currently not in operation. Accessories: Extraction system 9 tool holders, 4 of which are driven tools 1 pallet Various workpiece carriers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Rheon dough weigher - Twin Divider 400 VX202 - Year of construction 2004

This 6-axis Citizen C32 VIII was manufactured in 2005. Ideal for precision swiss type turning, this machine offers robust functionality and reliable performance. Consider the opportunity to buy this Citizen C32 VIII swiss type turning machine. Contact us for more information.

This VOORTMAN V304 was manufactured in 2015. A robust plasma cutting machine, its ideal for precision cutting tasks. Consider the opportunity to buy this VOORTMAN V304 plasma cutting machine. Contact us for further details.

VTT Pipe racks ideal for storing all types of pipes and tubes., The frame is fully galvanized., If you have any question dont hesitate to ask them., Dimensions: 4600 x 1160 x 1170, , = More information =, , Year of manufacture: 2026, Colour: Grey, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p ...

Manufacturer: Engel Victory 330/80 Model:Victory 330/80 Year of Manufacture: 2006 Operating hours: 95257 Closing force: 80 t Screw diameter: 40 mm Max. injection volume: 154 cm3 Fixing plate: 670 x 600 mm Machine weight: 5.6 t Find more here - / Contact us at -

Stainless Steel Mash Tun 1800L. Manufactured: 2015 Manufacturer: Brewing Vessels Ltd. Insulated with 80mm of insulation. Side entry manway. Sight level side window. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories:, Total enclosure,, Cooling unit for dielectric,, automatic fire extinguishing system,, Mist extractor N181, Probe,, Machine lamp,, automatic central lubrication,, Workpiece carrier ISO50,, Measuring mandrel,, Cutter outside diameter: Max. 250 mm, Cutting length: max. 260 mm, Shank tool diameter: 10 - 250 mm, Outside diameter disc-shaped tools: Max. 250 mm, Tool weight max.: 20 kg, X axis travel: 275 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis mounting cone: ISWO 50, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2220 mm, Weight approx.: 4500 kg, Connected load: 4.5 kW (400 V / 50 Hz), colour: gray RAL 7045/7047

pressure: 100 t stroke: 380 mm table surface area: 1100x424 mm dayligth: 180/750 mm distance between columns: 1100 mm diameter of piston: 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 060 t stroke: 350 mm table surface area: 750x344 mm dayligth: 197/750 mm distance between columns: 750 mm diameter of piston: 75 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

STIGAL VXstandard plasma cutting machine was built in 2020 in Poland by STIGAL Marcin Stępień. The machine, distinguished by its exceptional precision, is the perfect choice for thermal cutting of workpieces with a maximum thickness of 20 mm. The machining process is performed on a stable work table, whose open design offers free access to the workspace from all sides. The dust and gas extraction system (ECTS), which is integrated into the worktable, effectively removes contaminants generated during machining, providing a comfortable work environment. This is all complemented by a touchscreen operator panel with CNC control. The STIGAL VX-standard plasma cutting machine is offered with a reliable CEBORA plasma source of the highest energy efficiency. Technical specifications of STIGAL VXstandard plasma cutting machine - touchscreen operator panel with CNC controller - maximum shee ...

This 5-axis Mazak Variaxis i-500 was manufactured in 2019, featuring a spindle speed of up to 12,000 rpm and a tool magazine capacity of 30 tools. It supports workpieces up to Ø500 mm by 350 mm and has a table load capacity of 300 kg. Consider the opportunity to buy this Mazak Variaxis i-500 universal machining centre. Contact us for more information about this machine.

Arburg 570C2000-800 FY2006 Golden Edition, 1 core hoist, 1 conveyor belt 33.400 Multilift SELECT 6kg Arburg 470C-2000-800 FY2005 No core features; 1 conveyor belt

: 3 multifix: ja weight: 2 t : 500 centre distance: 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sharpening machine Vollmer For circular saw blades Type CHC 25 H Year of manufacture 1985 Automatic sharpening machine for breast, back and free grinding Carbide-tipped circular saw blades Circular saws Outer diameter from 80 mm to 810 mm Bore diameters from 10 mm to 220 mm Blade thickness up to 5 mm Tooth pitch from 7 to 100 mm Rake angle from 6° to 45° Bevel grinding of tooth backs up to 45° Tooth breast up to 15° Grinding speed infinitely variable from 0.5 to 6 mm/s Working speed up to 18 teeth Grinding wheel diameter 125 mm Bore diameter 32 mm Circumferential speed 26 m/s Coolant pump flow rate 40 l/min. Connected load approx. 1.6 kW Areas of application Flat tooth at an angle on one side, left and right Interchangeable tooth, roof tooth, trapezoidal flat tooth, group tooth, Uneven tooth pitch, omitted teeth, format chipper saws Weight approx. 680  ...

#7367 Heidelberg Varimatrix 82 CS Age: 2014 The cuts: 31.4 million Available: Immediately Location: Europe Size Max.: 815 x 605 mm Min. size: 320 x 280 mm The Cutting Force: 200 Tons (MT) Speed: up to 8.000 s/h

Ceiling heating Vacurant Industrie Manufacturer: Vacurant Type: Ceiling Heating Energy source: Gas Location: Paderborn

General SKU268N300 LocationBarneveld MakeHeraeus Hanau TypeRVT 500 No.7805013 Main Features MaterialAluminium Volume140 Ltr. Max.temp.180 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature180 °C Number of compartments:1 Capacity140 Ltr Internal diameter485mm Internal depth750mm Electric heatingcheck Electric capacity2 kW 220 Volt Number of doors:1 With trayscheck MaterialAluminium Information Year of construction1978 Mounted on framecheck With switchcheck Floorspace1,0x0,7 M Total height1,6 M Weight150 KGDrying ovensHeraeus HanauDryers > Drying ovensBrand > Heraeus Hanau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for man ...

Key data: 3000 mm, 850 mm, 800 mm

For sale Doosan 5-axis machining center type 850 LSR. equipped with a Fanuc control system, Key technical data (VCF 850LSR Travel (X/Y/Z): 3000 / 850 / 800 mm Table dimensions: 3500 x 870 mm Maximum table load: 3500 kg (incl. integrated turntable) Integrated rotary table (C-axis): Ø 800 mm B-axis (spindle inclination): 220° (+110° / -110°) Spindle speed: 12,000 rpm (standard) Spindle power: 18.5/22 kW (Fanuc) Spindle taper: BT40 (BIG-PLUS) Tool magazine: 60 stations (chain magazine) Rapid traverse (X/Y/Z): 40 m/min Machine weight: approx. 24,000 kg The machine is available from stock, subject to prior sale. For more information; Send an e-mail to chrismachinematch.nl

General SKU335W850 MakeVerwo Wegmann TypeSBL-112-S-FA-6-T No.7056 Year of construction2016 LocationBarneveld Pressure Working pressure6 Bar Main Features MaterialStainless steel Specified Features - Screen filter MaterialHalar coating, Stainless steel 1.4435 (316L) Sieve filtercheck Sieve sizesDia. 200x900 mm InletDN70 OutletDN70 Capacity33 l. Information Floorspace0,25x0,25 m Total height1,25 m Weight50 kg CEcheck Extra SpecificationsFilter size, dia. 160x700 mm, perforation size 20x4 mm :Screen filtersVerwo WegmannFilters > Screen filtersBrand > Verwo Wegmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mm y-travel: 460 mm z-travel: 450 mm Control: OSP U10 M total power requirement: 7,5 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Fanuc x-travel: 660 mm weight: 4 t : ja control: Fanuc 10 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vahterus PSHE 5SH-320/1/1 Plate Heat Exchanger Never been installed before!

GeneralCNC Grindingmachine; Control: Fanuc 32iA Special equipmentRMS-SensorSpecial equipment-Transformer - Handwheel - 680l coolant systemSpecial equipment- Program memory (512kb) - Registerable programs (1000 pcs.) - Signal light (3-stage) - High-performance magnetic separator (120 l/min) - Bed cleaning - Coolant temperature control unit - Wheel spindle cooling function - ATC unit (6 tools)

Based on the nameplate you provided and the technical data for the S3088 SPI (Solder Paste Inspection) variant, here are the key specifications for your machine: PCs replaced in 2024 to new ones Core Inspection Capabilities The S3088 SPI is a specialized high-performance system designed to detect printing defects immediately after the stencil printer. - Inspection Scope: Analyzes solder paste deposits for volume, height, form, area, displacement (X/Y offset), and smearing. - Component Compatibility: Capable of inspecting demanding assemblies with CSPs, micro BGAs, and pad sizes down to 01005. - 3D Technology: Uses a fringe projection process for precise 3D height and volume measurement. - Inspection Speed: Up to 80 cm²/s (depending on resolution settings). --------------------------------------------------------------- Technical Specifications (from your Nameplate & Records) Featu ...

The Viscom S3088 ultra gold is a high-performance 3D Automated Optical Inspection (AOI) system designed for high-volume electronics manufacturing that requires maximum throughput and precision. PCs replaced in 2024 to new ones Top Performance Specs - Inspection Speed: Up to 65 cm²/s, making it ideal for the highest throughput demands. - 3D Sensor Technology: Powered by the XMplus high-performance camera module. - Camera Configuration: Features up to 9 cameras (including orthogonal and angled views) for shadow-free 3D inspection. - Image Field Size: $50\text{ mm} \times 50\text{ mm}$. - Resolution: High-resolution 3D analysis down to 10 µm (orthogonal) and 0.5 µm (Z-axis). --------------------------------------------------------------- Key Technical Capabilities - Component Range: Reliably inspects the latest miniaturized generations, including 03015 components. - Defect Detection ...

faceplate diameter: 1.600 mm swing diameter: 2.000 mm turning height: 1.400 mm Control: Fanuc max. Torque: 23.863 Nm cutting capacity: max. 3.000 kgf max. workpiece weight: 10.000 kg table:: table diameter: 1.600 mm table speeds: 0,7 - 280 1/min power capacity - table: 37/45 kW C - Axis:: resolution: 0,001 ° Working speed: 0 - 1.200 °/min max. table speed: 3,333 1/min turret slide:: Shank diameter: 32 mm spindle cone: ISO 7/24 / No.50 Spindlespeed: 30 - 3.000 min/-1 power capacity - Tool Spindle: 15 / 18,5 kW max. Torque: 235 Nm ram cross section: 220 mm axis stroke:: x-axis: 1.900 mm z-axis: 900 mm cross rail adjustment: 700 mm Tool-Presetter:: tool taper: MAS-BT 50 number of toolpositions: 24 (12 + 12) pos. max. tool weight: 50,0 kg draw bolt: DIN 69872.50 feeds:: rapid feed (X / Z): 7,5 m/min feed speeds: max. 7.500 mm/min rapid traverse of the crossrail: 300 mm/min total powe ...

General SKU215X090 MakeVMI Rayneri TypeDYNAVAR SB 25 No.129542 Year of construction2002 LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Length1300 mm Specified Features - Stirrer Stirrercheck Paddle stirrercheck Shaft length1300 mm Sizes stirring headø 175 x 30 mm Motor1,5 kW 400 Volt With variable speed drivecheck Speed mixing shaft350 — 1750 rpm MaterialStainless steel 1.4306 (304L) Information Floorspace1,3 x 1,4 m Total height2,2 m Weight400 kgStirrersVMI RayneriMixers > StirrersBrand > VMI Rayneri What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU427X1331 LocationBarneveld CEcheck MakeVerder Pressure Working pressure7 Bar Main Features MaterialPolypropylene Volume9000 Ltr. Specified Features - Diaphragm pump MaterialPolypropylene Diaphragm pumps Pumpcheck (Air-operated double-diaphragm (AODD) pump) Number of pumps:1 Capacity150 L/min (9 m³/h) Without motorcheck Pneumatic drivecheck (compressed air) Inlet1 NPT female Outlet1 NPT female Information TypeVA-P25 UU UU CV TO TN OO Mach.No.66123 Year of construction2021 Floorspace0,24 x 0,24 m Total height0,3 m Weight25 kg ATEX compatiblecheckDiaphragm pumpsVerderPumps > Diaphragm pumpsBrand > Verder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Bar ...

General SKU397X1124 MakeElektro-Wärme Aachen LocationBarneveld TypeHS VRTK 120 Pressure Vacuum possiblecheck Main Features MaterialStainless steel/Halar Volume120 Ltr. Max.temp.200 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature0 — 200 °C Capacity120 Ltr. Internal diameter500 mm Internal depth620 mm Electric heatingcheck (2,1 kW) Number of doors:1 MaterialHalar coating Information No.5714.02-07 Year of construction2007 Floorspace0,82 x 0,77 m Total height0,67 m Weight200 kg Extra Specifications Halar-coated interior without vacuum pumpDrying ovensElektro-Wärme AachenDryers > Drying ovensBrand > Elektro-Wärme Aachen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

General SKU397X1125 MakeElektro-Wärme Aachen LocationBarneveld TypeHS VRTK 120 Pressure Vacuum possiblecheck Main Features MaterialStainless steel/Halar Volume120 Ltr. Max.temp.200 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature200 °C Capacity120 Ltr. Internal diameter500 mm Internal depth620 mm Electric heatingcheck (2,1 kW) Number of doors:1 MaterialHalar coating Information No.559602 Year of construction2000 Floorspace0,82 x 0,77 m Total height0,67 m Weight200 kg Extra Specifications Halar-coated interior without vacuum pumpDrying ovensElektro-Wärme AachenDryers > Drying ovensBrand > Elektro-Wärme Aachen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...

This 3-axis Vision Wide SE-2112 CNC milling machine was manufactured in 2018. Ideal for precision milling, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the Vision Wide SE-2112 machine we have for sale. Contact us for more information.

General SKU439X1389 LocationBarneveld MakeWalter Brucks TypeVII Main Features MaterialStainless steel Inlet diameter350 mm Specified Features - Coating pan Coating pancheck Capacity10 l. Pan diameterø 600 mm Pan depth360 mm In-/Outletø 350 mm Pan can be tiltedcheck Motor380 V With variable speed drivecheck Pan speed10—45 rpm With spraying armcheck With dosing pumpcheck Motor560 W, 6 bar, MaterialStainless steel 1.4301 (304) Information No.4950 Year of construction1974 Mounted on framecheck Floorspace1,20 x 0,80 m Total height1,60 m Weight250 kg Extra SpecificationsWith Terlet stainless steel pressure vessel, volume 25 L, maximum pressure 6 bar, jacket pressure 3 bar, allowable temperature 144 °C.Coating pansWalter BrucksCoating pans > Coating pansBrand > Walter Brucks What you can expect from Foeth: -- Machine is in working condition -- At a reduced pri ...