delta 60 used for sale

2 x poles BAZ Manufacturer: DMG Type: DMP 60s BJ: 2004 and 2003

General SKU212T470 MakeDidier Filtertechnik GMBH LocationBarneveld CEcheck TypeMSF 600/F Pressure Working pressure6 Bar Main Features MaterialStainless steel Pressure6 Bar Vacuumcheck Surface3.1 m2 Specified Features - Horizontal plate filter Filter surface3,1 m² Horizontal plate filters Filter presscheck Filter surface3,1 m² Stainless steel platescheck Number of platens12 Internal platen sizesDia: 564 mm External platen sizesDia: 604 mm Platen thickness48 mm Frame thickness38 mm Cake capacity112 Ltr. Central inletcheck ConnectionsDN 25 (2x) With outlets on platenscheck With hand valvescheck Hydraulic closingcheck With hydraulic unitcheck manual Mechanical closingcheck MaterialStainless steel 1.4571 (316Ti) Information No.HW-16657 Year of construction2003 Mounted on wheelscheck Floorspace1.5x1 m Total height2,4m Weight1000 kgHorizontal plate filt ...

Offer 25276 Extraction filter system / stationary filter system with wet separator Technical data: - Suitable for moist sticky dusts, metallic grinding - with strong flying sparks - Single + multi-station extraction - Volume flow approx. 5150 m³/h. - Water capacity 390 l - Drive power 400 V / 7.5 kW - Required space W 1250 x H 3650 x D 1100 mm - Weight approx. 550 kg

Transnorm conveyor belt GF 12500-600-500 RA2097 Technical data: Conveyor length (NL): 12500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R27 DT90S4/Th Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 12500 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Ze ...

liter capacity: 600 l Pressure of pump: 2 / 3 / 40 bar control: Schütze / Contactors total power requirement: 11 kVA weight of the machine ca.: 450 kg dimensions of the machine ca.: 1,80 x 1,35 x 1,70 m Coolant System INTERLIT (DMG) - BFA 600-A/40/2/3 50/60 HZ - Very good condition - Connected to DMU 50 3rd Edition - Controllable via contactors - Incl. paper belt filter - Number of pumps: 3 - Pump capacity: 0.63 kW, 2,750 rpm (50 Hz), 60 l/min, 20 m 2.89 kW, 3.75 HP, 2,880 rpm (50 Hz), 24/22-30/27 l/min 3.10 kW, 4.20 HP, 2,930 rpm (50 Hz), 160 l/min, 40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1100 KW, 983 kVA, 10000 V

Deutz / MWM Landfill Gas CHP Plant TBG 604 CV16 Landfill gas electricity and heat generator from 1998, unknown operating hours, with control, radiator and silencer 983 KWel x 1,500 rpm, 10,000 V/50 Hz. AC Generator: Stamford HVSI814C2, 983 KVA Manufacturer: Deutz / MWM Model / Engine: TBG 604 CV16 Type: Gas Engine (Landfill Gas) Serial number: G 808288 Power [KWel]: 983 Engine power [KW]: 1,100 Year of Make: 1993 Operating hours: unknown Weight gene set [kg]: 12,180 Dimensions LxWxH [m]: 5.1 x 1.7 x 2.1 AC Generator Stamford HVSI814C2 Manufacturer: Stamford Model No.: HVSI814C2 Type: AC Synchronous Generator Serial Number: C850153701 Power [KVA]: 983 Voltage [V]: 10,000 Frequency [Hz]: 50 Current [A]: 56.75 Speed [1/min]: 1,500 Year of Make: 1997 Weight [kg]: 4.600

Stüer conveyor system Roller conveyors 16950-620-600 RA2456 Further information Manufacturer: Stüer Type: Roller conveyor Condition: good (used) Conveyor length (NL): 16950 mm, 6 elements between 1700 and 4200 mm, Roller width (RB): 600 mm Nominal/outer width (NB): 620 mm Frame height: 140 mm Overall height including motor: 240 mm Roller pitch: 75 mm Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.5 m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: gut Conveying length in mm: 16950 Nominal / outside width in mm: 620 Roll width in mm: 600 Roll division in mm: 75 Driven: YES scope of delivery: mit Motor, without supports and side guides Für e ...

Stüer conveyor system Roller conveyors 15890-620-600 RA2457 Further information Manufacturer: Stüer Type: Roller conveyor Condition: good (used) Conveyor length (NL): 15890 mm, 3 elements Roller width (RB): 600 mm Nominal/outer width (NB): 620 mm Frame height: 140 mm Overall height including motor: 240 mm Roller pitch: 75 mm Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.5 m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: gut Conveying length in mm: 15890 Nominal / outside width in mm: 620 Roll width in mm: 600 Roll division in mm: 75 Driven: YES scope of delivery: mit Motor, without supports and side guides Für eine individuelle, fachmän ...

centre height: 250 mm centre distance: 600 mm Dimensions (L/W/H): 3600 x 1900 x 2100 mm weight of the machine ca.: 2,25 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 2500 mm z-travel: 1000 mm Control: Siemens type: Sinumerik 840 D Feed: 5-30.000 mm/min Table area: 2000x2170 mm table load: 1500 Kg/m² T-slots: 22 H9 distance between uprigths: 2500 mm spindle turning speed range: 6000 U/min spindle drive: 36 kW spindle taper: HSK 100 Tool changer: 30 Rotary table: 2000 mm speeds: 250 U/min turning diameter: 2500 mm table load: 10 t Torque: 33000 Nm total power requirement: kW weight of the machine ca.: 45 t dimensions of the machine ca.: 8x6,4x4,4 m Gentry gantry milling machine with carousel rotary table Head change station Tool changer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,0 ...

Cylinder vessel with double jacket (heatable), stainless steel 1.4571, length 4.9ß0 mm, diameter approx. 1200 mm, weight 2000 kg, vacuum resistant, longitudinally installed agitator shaft with brushes, agitator 2.2 kW approx. 20 rpm, inlet and outlet each front, condition: used, from plant dismantling (vacuum evaporator)

General SKU259P363 MakeScan-Vibro A/S (DEN) TypeTRK 600x300x2000 No.27511 Year of construction1997 Mounted on framecheck Main Features MaterialStainless steel Length2000 mm Width600 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder width600mm Feeder length2000 Feeder height300mm Closedcheck Inletdia.200mm Outletdia.200mm, dia.100mm With vibro motor(2x) 0,5KW, 400 Volt (Ex) Information LocationBarneveld Floorspace3,0x1,0 M Total height2,5 M Weight615 KG ATEX compatiblecheck Extra Specificationswith sieve 0.315x0.135 t = 0.2, with (3x) inspection hatch, Capacity 100 kg / h (p = 3.5 Kg / dm3) The bed is jacketed for cooling purposes Vibro feedersVAV Scan-VibroConveying systems > Vibro feedersBrand > VAV Scan-Vibro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to n ...

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: 22,500 mm Number of fields per row of shelves: 08 pcs. Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of racks: 72 pcs. Total pallet spaces: 72 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,100 kg The scope of delivery includes: 09x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P113 Profile dimensions: 100 x 100 x 2 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 4,000 mm Depth: 1,100 mm 32 ...

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 14,040 mm Number of fields per row of shelves: 05 pcs. Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 45 pcs. Total pallet spaces: 45 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,100 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P73 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 3,600 mm Depth: 1,050 mm  ...

A Stromab pendulum saw with swiveling saw unit and roller conveyors is available. Motor power: 7.5kW, saw blade diameter: 600mm, saw blade bore: 20mm, max. cutting height: 210mm, max. cutting length: 460mm, extraction port diameter: 150mm, roller conveyor length left/right: 2500mm/2500mm, roller conveyor width: 500mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

Transnorm Rising falling Incline with arch and forerun belt conveyor 1000+10700+1000-600-500 RA2459 Technical data: Conveyor length (NL): 12700 mm (1000 mm forerun + 10700 mm incline + 1000 mm arch ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 12700 ( 1000 + 10700 + 1000 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodr ...

Key data: 5760 KW, 3450 V

Niigata Natural Gas Generators 2 × 2,880 kW / 60 Hz Two well-maintained natural gas generator sets manufactured by Niigata in 2005, each with an electrical output of 2,880 kW at 60 Hz. The plant was operated until 2020 and maintained in accordance with Niigata’s maintenance procedures. The most recent scheduled 30,000-hour major maintenance for both engines was completed in April 2019. At the time of shutdown, the total accumulated operating hours were approximately 31,000. The plant was professionally dismantled in 2022. The scope of supply includes the plant control system, all mechanical and electrical indoor auxiliaries, high-voltage circuit breakers, and motor control center (MCC) cabinets. Technical Data: Product Gas Engine Generators with auxiliaries Model Niigata18V22AG Electrical output 2880kWe Manufacturing year 2005 Rotation speed 900rpm Number of gensets  ...

Offer 26037 Technical data approx.: - Plate length approx. 6000 mm - Plate width approx. 1800 mm - Top height without base approx. 360 mm - Top height with base approx. 870 mm - Thickness of the top plate approx. 75 mm - 6 T-slots in table surface length 6000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. mm - T - groove depth approx. mm - Space required: L 6000 x D 1850 x H 870 mm - Weight approx. 11000 kg

General SKU330W710 MakeGEA Collette N.V. Typeultimagral 600 Mach.No.06G0600036 Year of construction2006 Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume600 Ltr. Motor37 KW Specified Features - Universal mixer MaterialStainless steel 1.4401 (316) Gral-granulatorcheck CapacityGross 600l, net 300-400l, 600kg Vessel sizesDia. 1100 x 700 mm With covercheck InletDia, 100mm, 45 mm, 30 mm Pneumatic operated outletcheck OutletDia. 250mm With jacketcheck With motor37kW (400/690 V, 1480 rpm) With variable speed drivecheck Frequency controller With lump breakercheck With motor15kW (400/690 V, 2900 rpm) Information Mounted on framecheck LocationBarneveld With switchgearcheck (as is) CEcheck Extra Specificationsscope of this machine: - Collette Ultimate Gral 600. - system for cleaning (CIP) with 2x Milton pumps. - vacuum pump, Busch, ty ...

Dough sheeter Fritsch 600 used dough sheeter Fritsch 600 with digital control and automatic reel from 2008 for sale and immediately available in our warehouse in Bielefeld. Dough sheeter Fritsch 600 - Stainless steel dough sheeter Fritsch Rollfix - with reel - With touch display - 60 or 65cm bandwidth - Year of construction 2008

Overbeck Rising falling Incline belt conveyor with overdrive vorrun GF 800+5260-600-500 RA2461 Technical data: Conveyor length (NL): 6060 mm ( 800 mm vorrun + 5260 mm riser segment ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 120 mm, 360 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0.5 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides leading belt with overdrive Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6060 ( 800+5260 ) Nominal / outside wi ...

Overbeck Rising falling Incline belt conveyor with arch GF 600+5460-600-500 RA2460 Technical data: Conveyor length (NL): 6060 mm ( 600 mm arch + 5460 mm riser segment ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 120 mm, 360 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0.5 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides leading belt with overdrive Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6060 ( 600 + 5460 ) Nominal / outside width in mm: 6 ...

We offer: Pallet racking, new Manufacturer: STOW is available several times. Scope of delivery for: 180 parking spaces other quantities also possible. 16 stud frames, approx. 6,000 x 1,100 mm 90 editions, approx. 2,700 x K125 x 50 x 1.5 mm 180 locking pins 32 Ground Anchor M 12 Technical data: Shelf height: approx. 6,000 mm Shelf depth: approx. 1,100 mm Max. load capacity per field: approx. 12,000 kg Max. load capacity per pallet: approx. 1,000 kg Max. load capacity per pair of trusses: approx. 3,000 kg (with evenly distributed load) Colour of the frames: blue Colour of the trusses: orange Shipping: Cheap shipping possible with inexpensive forwarding agent. Please inquire about the freight costs, stating your zip code and location as well as the desired item quantity. We offer a comprehensive range of new and used shelves and accessories and we ...

General SKU326X670 MakeAllgaier TypeVTS-600/2 No.268 Year of construction1986 LocationBarneveld Main Features MaterialStainless steel Surface1.13 m2 Sizes diameter600 mm Specified Features - Vibro sieve MaterialMild steel, Stainless steel 1.4552 Vibro sievecheck Sieve surface1,13 m2 Number of sieve decks:1 Sieve sizesDia. 600 mm With covercheck InletDia. 160 mm OutletDia. 90 mm Drive vibro motorcheck Motor0,3 kW, 415 volt, 1460 rpm Sieve perforation0,1 mm With ball cleaningcheck With extra sieve decks0,3 mm Information Mounted on mild steel framecheck With switchcheck Floor space0,95x0,95 m Total height1,0 m CEcheckVibro sievesAllgaierSieves > Vibro sievesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect th ...

The Ilpra FS 6000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request., Make: Ilpra , Model: FS 6000, Capacity: 4800, Year of Manufacture: 2003, Filling Volume: 50-500 ml per cup , Cup Dispenser: Automatic twin dispenser , Filling: Twin Filling Heads , Filling Specs: Fruits up to 1 cm pieces , Sealing: Twin Heat Sealing Station , ...

2 x BAZ DMG DMU 60T BJ 2000/2002

Technical data: Circumferential diameter: 680 mm Center width: 1000 mm Speed: 2800 1/min Chuck: ø300 mm Dimensions, approx.: 5560 x 2400 x 2130 mm Weight, approx.: 10,000 kg Equipment: - Control: Heidenhain CNC Pilot 4290 - 12-speed revolver VDM 40 - C-axis

pressure: 330 t chamfer lenght: 6100 mm distance between columns: 5600 mm Control: Cybelec VisiTouch 24 stroke: 300 mm dayligth: 500 mm : 160 mm/s bending speed: 0-9 mm/s total power requirement: 32 kW weight of the machine ca.: 36.000 kg dimensions: 6970 x 2300 x 4150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.78 m, Overall length= 1.15 m, Overall width= 1.18 m, Net weight= 552 kg,

Height=1.49 m, Overall length= 1 m, Overall width= 2.27 m, Net weight= 573 kg,

This 2-axis SPINNER TC 600-65MC horizontal turning machine was manufactured in 2017, featuring a Siemens 840D control system and a 16-position indexing turret. It includes a main spindle with a speed of up to 4,000 rpm and a power of 24 kW. The machine offers a swing diameter over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to buy this SPINNER TC 600-65MC horizontal turning machine. Contact us for more information about this machine.

This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information.

This 5-axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for precision vertical machining, this used machine represents a valuable addition to any workshop. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60U RS5 vertical machining centre. Contact us for more information.

This Bridgeport GX 600 Vertical Machining Center was built in 2007 in the United Kingdom. Equipped with a SIEMENS SINUMERIK Control unit, this machine can operate with a spindle speed up to 8000 rpm.

This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions.

This 3-axis MIKRON UM 600 vertical machining center was manufactured in 1997. If you are looking to get high-quality milling capabilities, consider the MIKRON UM 600 machine we have for sale. Contact us for more information.

This DMG DECKEL MAHO DMC 60T was manufactured in 2005. A Universal machining centre, it offers robust construction and reliable performance for precision machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60T Universal machining centre. Contact us for more information.

This MAZAK NEXUS HCN 6000 Horizontal Machining center was made in the year 2006 in Japan. It is equipped with a MAZATROL 640m control unit and has 4 axis. The machine has a spindle speed of 10000 rpm. 2 units available

This 4-axis DECKEL MAHO DMC 60H hi-dyn was manufactured in 2000. It features a Siemens Sinumerik 840D control, a spindle speed up to 8000 rpm, and a 90-position tool magazine. The machine includes a pallet changer with 4 storage locations and a rapid traverse rate of 60 m/min. Ideal for high precision horizontal machining. Contact us for more information about this machine.

This SEI MERCURY 603 1520 350W Laser cutting machine was manufactured in the year 2007 in Italy. The machine has a laser power of 18,5 kW.

This 4-axis OKUMA SPACE CENTER MA-600HB horizontal machining center was manufactured in 2007. It boasts a robust 160-tool ATC warehouse, continuous 4th axis table, and high-pressure cooling system at 30 BAR. With X/Y/Z strokes of 1000/800/810 mm and a maximum spindle speed of 6000 RPM, this machine ensures precision and flexibility for various machining tasks. The OKUMA MA-600HB machine we have for sale is designed for heavy-duty machining, accommodating pieces up to 1500 kg. For further details, please contact us.

This 3-axis MIKRON VCP 600 was manufactured in 2004. It features a high-performance spindle with speeds up to 20,000 rpm and a robust 30-slot tool changer. The working range is 600 x 450 x 450 mm, supporting a maximum workpiece weight of 500 kg. Ideal for precise machining of metals and alloys, it offers stable construction and efficient cooling. Consider the opportunity to buy this MIKRON VCP 600 vertical machining centre. Contact us for more information.

This 3-axis DMG MORI CMX 600 V was manufactured in 2017, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine.

This 3-axis CMS tecnocut JP 60hp was manufactured in 2008. Its a waterjet cutting machine designed for precision in cutting a wide range of materials. Consider the opportunity to buy this CMS tecnocut JP 60hp waterjet cutting machine. Contact us for more information.

This 3-axis CHIRON Mill 6000 SK was manufactured in 2004, featuring a high-speed motor spindle at 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It includes a 5-axis milling package, 92 tool positions, and a Marposs collision monitoring system. Ideal for long part machining up to 6,000 mm and pendulum machining. If you are looking to get high-quality milling capabilities consider the CHIRON Mill 6000 SK machine we have for sale. Contact us for more information.

This 5-axis Mazak Variaxis i-600 was manufactured in 2013. It features a Siemens 840D control system, a table size of 600mm, and a spindle speed of 18000 RPM with a power of 35 kW. The machine offers a tool capacity of 40 and has spindle run hours of 1900. If you are looking to get high-quality milling capabilities, consider the Mazak Variaxis i-600 machine we have for sale. Contact us for more information about this machine.

This Grecon Dimter FDL-F 205/600/500 was manufactured in 1997. It is designed for woodworking applications, offering robust performance and reliability. Ideal for handling a variety of wood processing tasks efficiently. Contact us for more information about this machine.

This 4-axis DECKEL MAHO DMU-60T was manufactured in 2005. It features a robust vertical machining centre with X, Y, Z travels of 630 mm, 560 mm, and 560 mm respectively. Equipped with a high-speed spindle up to 18,000 rpm and a HSK-63A taper, it ensures precision and efficiency. The machine includes a Heidenhain MillPlus CNC control and a 20-tool magazine. Consider the opportunity to buy this DECKEL MAHO DMU-60T vertical machining centre. Contact us for further details regarding this machine.

This 3-axis DECKEL MAHO DMU 60T was manufactured in 1996. It features a 24-position tool changer, an NC rotary table, and a spindle speed up to 6300 rpm. The working areas are 600 mm in length, 525 mm in width, and 500 mm in height. It includes a coolant system with a 150-liter capacity. Consider the opportunity to buy this DECKEL MAHO DMU 60T vertical machining centre. Contact us for more information about this machine.