126,720 used machines on RESALE, but how to find them? Machine Search
Tumbler screening machine, used Type : ATS 600 / 2 Manufacturer : Allgaier --> Ø 600 mm, 2 screen decks, 3 outlets, with feed hopper.
- Gearbox with oil circulation lubrication - Blank counter holder (optional) - Processing unit KA - behind the machine (optional) - Specifications: Blank diameter (max.): 1,200 mm Tip width : 900 mm Tool holder DIN 55027: Gr. 11 Axis force (transverse) (max.): 20 kN Axis force (longitudinal) (max.): 30 kN Stroke (transverse): 360 mm Stroke (longitudinal): 750 mm Cross speed: (max.) 3.0 m/min Longitudinal speed: (max.) 2.0 m/min Stroke ejector: 400 mm Tailstock stroke: 750 mm Speeds (9 levels): 42-660 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 6,000 kg
Specifications: Travel X/Y/Z: 600 / 600 / 700 mm Motor power: 15 kW (40% ED); 10 kW (100 & ED) Speed: 18,000 1/min Tool holder: SK 40 SK 40 magazine slots: 60 Equipment: - MillPlus IT 3D path control - Horizontal tool changing device Double gripper - Automatic swivel milling head - Rotating viewing panel - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B-axis SK 40 (only in combination with motor spindle SK 40) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Mode 4: Advanced manual intervention - Flushing gun with pump - Tool breakage detection SK 40 mechanical design, range: 63...310 mm / +/- 3 mm - Interval switching chip conveyor - Internal coolant supply can be switched from 40 bar to 80 bar
A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.
Height=1.93 m, Overall length= 1.1 m, Overall width= 0.8 m, Net weight= 147 kg,
Dimensions (L/W/H): 2100x1250x1750 mm weight: 700 kg total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1900x1250x1750 mm weight: 600 kg total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2200x1250x1750 mm total power requirement: 6,5 kw weight: 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working area: 500x300 mm Capacity: 60 Watt Weight: 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2200x1200x1250 mm Weight: 1000 kg Total power requirement: 16,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1300x1200x1650 mm Weight: 440 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 940x1250x1400 mm Weight: 250 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 5350x4380x1820 mm Weight: 6800 kg Total power requirement: 41 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4850x4380x1820 mm Weight: 5800 kg Total power requirement: 41 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2300x1250x1750 mm weight: 800 kg total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1500x1100x1500 mm Weight: 300 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8015x1635x2125 mm Weight: 2400 kg Total power requirement: 13,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1800x930x1500 mm Weight: 700 kg Total power requirement: 1,65 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Type: HSB-600 Serial number: 118 Year of construction: 2011 Belt width: 630 Power: 3 x 400V, 50Hz, 16A Dimensions: 4400 x 1750 x 2250 mm Weight: 1600 kg
Measuring range: 600 mm measuring system resolution capability: 0.001 mm weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We have a Bonfiglioli Squalo 600 machine in a working condition. The machine is avaliable " Today".
Type: BR6000/600 Serial number: 1382 Year of construction: 2001 Belt width: 600 mm Frying length: 6000 mm Heating: thermal oil, 388 kW Oil volume: +/- 1250 litre Frying time: 25 - 250 sec Power: 3 x 415V, 50Hz, 8kW Dimensions: 8950 x 2050 x 3900 mm Weight: 4250 kg Teflon infeed, hold down belt, sediment removal, circulation pump, oil level control, prepared for CO2 fire extinguisher
Technical data of the pallet rack crossbar: Shelving system: Bito Type: PRO The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Truss Type: PT170S Box profile: 170 x 50 mm Agraffe: 5 HK (hooks) Clear width: 3,600 mm Max. load per pair of trusses 4,000 kg, with the same weight. Distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Note: Despite the holes, the functionality of the trusses is guaranteed! The trusses come from a BITO project with heat dust layers that are were screwed together! Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with ...
KELLENBERGER 600U Universal Grinder Machine No. 721/441 Distance between centres 600 mm Centre height 125 mm Table orientation 11 degrees Grinding wheel for cylindrical grinding 400 x 50 x 127 mm Motor power 3 kW Spindle speed 1500 / 1700 / 2200 rpm Orientation of grinding wheel holder headstock 270degrees (3 x 90) Grinding wheel speeds 3600 rpm Boring for internal spindle 70 mm Workhead swivel 360 degrees Workhead speeds 20 - 400 rpm Wheelhead motor power : 3 kW Workhead head motor power : 0,9 kW Dimensions 2580 x 1680 x 1670 mm Weight 2200 kg
Weinig Hydromat 23 four-sided planer 60m/min Working width 230mm Working height 160mm Number of spindles 5 Spindle layout: 1.Lower 15kw 2.11kw rights 3.Left 11kw 4.Upper 15kw 5.Lower 7.5kw Spindle speed 6000r.p.m Spindle Diameter 50mm 3 pulling rollers in the working table Inverter-adjustable feed speed up to 60m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation Machine dimensions 300x180x170cmH Weight 3500kg Net price 130.000PLN
Inv. Num. : 6800 Type: 6020 Producer: RT Created: 2016 Parameters: Work table length: 6000 mm Work table width: 2000 mm Machine weight: 8000 kg Equipment: 3D Head TECHNI Possibility of 3D cutting
In this package we offer the new Framax Xlife Plus upgrade with a panel height of 1.35 and 0.60 metres. 💡 With its integrated cross profiles and new transom system, the Facelift panels offer a high degree of flexibility when connecting brackets, panel supports and transoms. The powder coated finish gives a high quality, uniform appearance and makes cleaning quicker and easier. ✔ 100% compatible with existing FXP panels. 🔧 Unrestricted use of DokaXact possible. 🔨 ⚙ 🔧 Take the opportunity now to make your formwork projects more efficient and flexible! Price: from € 270,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned condition. Medium used formwork & scaffolding with traces of use. Suitable for standard requirements. ...
In this package we offer the new Framax Xlife Plus upgrade with a panel height of 1.35 and 0.60 metres. 💡 With its integrated cross profiles and new transom system, the Facelift panels offer a high degree of flexibility when connecting brackets, panel supports and transoms. The powder coated finish gives a high quality, uniform appearance and makes cleaning quicker and easier. ✔ 100% compatible with existing FXP panels. 🔧 Unrestricted use of DokaXact possible. 🔨⚙🔧 Take the opportunity now to make your formwork projects more efficient and flexible! Price: from € 334,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suitable for standard up to demanding requirements. 11 x Framax Xlife ...
📏 Compact & clever †the MANTO 1.20 m and 0.60 m! Need formwork for lower wall heights or looking to add flexibility to your setup? Then the Hünnebeck MANTO at 1.20 m and 0.60 m height is just what you need! 🔧 The MANTO 1.20 m and 0.60 m is part of the trusted Hünnebeck wall formwork system †robust, durable, and highly versatile . With hot-dip galvanized steel frames , it’s made to handle tough site conditions and daily use. 💡 💼 Especially practical for details: The 1.20 m and 0.60 m panels are easy to handle , quick to install, and ideal for small surfaces , foundations , or as a smart add-on where flexibility is key. And of course, they can be used horizontally or vertically , and combined as needed. 🔁 And just like always: 📦 Accessories? Absolutely! Our warehous ...
Transnorm conveyor belt GF 6800-600-500 RA2446 Technical data: Conveyor length (NL): 6800 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstat ...
Transnorm conveyor belt GF 6100-600-500 RA2447 Technical data: Conveyor length (NL): 6100 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.8 m/s Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6100 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s: 0,8 scope of delivery ...
Interroll conveyor belt GF 4500-600-500 RA2451 Technical data: Conveyor length (NL): 4500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 4500 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zent ...
Transnorm conveyor belt GF 14200-600-500 RA2445 Technical data: Conveyor length (NL): 14200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 14200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstat ...
Transnorm conveyor belt GF 7200-600-500 RA2448 Technical data: Conveyor length (NL): 7200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 7200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstat ...
Transnorm conveyor belt GF 13900-600-500 RA2450 Technical data: Conveyor length (NL): 13900 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Small 25mm pulley for low-gap transfer Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 13900 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW ...
Transnorm Rising falling Incline with forerun belt conveyor GF 6000+800-600-500 RA2449 Technical data: Conveyor length (NL): 6800 mm (800 mm forerun + 6000 mm incline) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R27 DT80N4/BMG/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 ( 6000 + 800 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eu ...
Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 600 Compact ---------------------------------------------------------------------- The machine has been cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----------------------------------------------- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine ...
JCB 525-60T4 Telescopic Loader, - Year of construction: 2019, - Net weight: 5320 kg, - Lifting height: 6 m, - Range: 3.5 m, - Load capacity at LSP: 2.5 t, - Motor power: 55 kW
Transnorm Rising falling Incline belt conveyor with leading belt GF 5800+1000-600-600 RA2454 Technical data: Conveyor length (NL): 6800 mm ( 5800 mm riser segment + 1000 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 ( 5800 + 1000 ) Nominal / outside width in mm: 600 Belt width in mm ...
Transnorm conveyor belt GF 15683-600-500 RA2452 Technical data: Conveyor length (NL): 15683 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, R27 DRE80M4/MM15/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 15683 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s: 0,25 scope of d ...
Transnorm conveyor belt GF 6920-600-500 RA2453 Technical data: Conveyor length (NL): 6920 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.35 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6920 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s: 0,35 scope of delivery: without sup ...
0: 600 x 800 mm Motor output: 15 kW 0: 0,6 m³ Diameter of the motor: 260 mm Dimensions (L/W/H): 1.805 x 1.118 x 1.646 mm Weight: ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ------------------------------------ Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 8 ...
The machine is in good technical condition, testing possible after prior agreement. 3 AXES, Heidenhain ITNC 530 control system.
UV DRYER GIARDINA FOR HEIDELBERG 52 -Max size 36x52 cms. -UV dryer Giardina model 601/2 Year 1998, totally programmable -Low pile delivery, 2 UV lamps installed 600 W each -Air extraction motor, pipes -Max power 22 KW, 51 Ampere -2,5 meters length
Manufacturer: ESC Model: ESC-AT-60PD Type of Machine : Screen Printing Machine Semi-automatic, universal, digitally controlled precision screen printing machine for flexible and rigid materials up to 200 mm material thickness STANDARD EQUIPMENT/FEATURES - Programmable PLC control system - User-friendly operation via touch screen - High-quality linear guides for smooth, low-noise motion - Vertical, motor-driven screen frame lifting with synchronized stripping motion - Precision print head with pneumatic lift for screen change and cleaning - Digital input of desired print parameters: - Speed for print and flood squeegee - Print height - Print stroke length - Neutral position for print and flood squeegee - Single-function control for setup operation - Single-cycle operation via foot switch and automatic cycle mode - Extremely short setup times without the need for tools - Pneumatic scr ...
For sale is a MAHO MH 600 P universal tool milling machine with Heidenhain TNC 135 control. The machine comes from German quality production and is ideal for toolmaking, single part and small series production as well as training companies. The milling machine is robustly designed, precise and versatile. The universal design allows both horizontal and vertical machining to be carried out. Technical data: Manufacturer: MAHO Werkzeugmaschinenbau Model: MH 600 P Control: Heidenhain TNC 135 Travels: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Table size: approx. 250 × 1000 mm Spindle speed: approx. 50 – 2500 rpm Feed: infinitely variable Connection voltage: 220 / 380 V, 50 Hz Machine weight: approx. 1,900 kg Equipment: Universal milling head Automatic feeds Heidenhain Digital Display / CNC Control TNC 135 C ...
A Schenk Orion filter press with a deflection chamber is available. Number of plates: 85, frame: 100, plate dimensions X/Y: 600mm/600mm, max. filter area with 80 plates: approx. 22m², pipe connection diameter: 50mm, throughput capacity: approx. 30hl-45hl/h, max. throughput capacity: approx. 75hl/h. An on site inspection is possible.
The Flexa 607 automatic edge banding machine is an extremely versatile machine with a high performance that puts it at the top of its category. Productivity: The high machining speed of up to 22 m/min ensures high productivity in all working conditions. The XE version with controlled axes enables extremely fast and precise machine setup. Flexibility: The optional equipment of the machine with a belt press allows the processing of any type of material. FLEXA 607 / 607 XE Panel height 10 (13) ÷ 60
Shear force 60 t Punching force 40 t Profile steel shears L- and T-irons at 90° 100 x 10 mm at 45° 65 x 8 mm Notching device with square notch for sheet metal up to 10 mm Flat steel shears for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electrical contact stop 3000 mm - Anchor table - Adjustable hold-down device - Tool package Validity of the security check until Feb. 2026
maximum number of results exceeded
please refine your search
