dehumid used for sale

New oil tank 100,000 liters for sale. Above-ground heating oil tank system 100,000 litres, D=2,900 mm Above-ground tank systems from Dehoust according to EN12285-2 (CE), class B, tank type D, for heating oil. Cyl. Storage tank made of steel, double-walled, with filled control liquid Glymin NF (approval no. BAM 1.4/12481-5.1/6035). Standard with a Dom DN 600 with dome cover, gasket and screws. Container inside raw, outside all parts sandblasted and with simple primer. Incl. synthetic resin paint on the outside in RAL colour. Complete tank system equipped with: - welded-on saddle feet - optical leak detector type LAS, approval no. Z-65.24-381 including Test and control liquid for refilling. (up to Ø2000mm pre-assembled) - Tank fitting for heating oil (pre-assembled up to Ø2000mm), consisting of: Filling tube 2" with TW closure Suction combinatio ...

appr. 40 m³ / 40,000 litres palm oil tank, steel tank, insulated, double-walled, heating coil on the inside, above ground storage container, on 2 bases manufacturer: Dehoust year of manufacture: 2007 volume: 40 m³ / 40,000 L DIN: 6616 D /6601 serial number: 17 / 07 322 leak indicator: control fluid control fluid volume: 320L diameter: ø2500 tested over-pressure: 2 bar tested over-pressure for the double wall: 0,6 bar insulation: mineral wool appr. 10-18 cm, coated with aluminium plates material: inner wall S235JR, outer wall S235JR suitable for fluids harmful to water and for both combustible and non-combustible fluids inner heating coil The container is in used condition, according to the age there are traces of use. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is ...

S39 - used approx. 60 m³ / 60,000 ltr double-walled steel tank, heating oil tank, water tank, fire fighting tank, water cistern. technical details: capacity: approx. 60 m³ / 60,000 ltr material: steel tank, double-walled, DIN 6616D/6601 manufacturer: Dehoust year of construction: 2007 factory no.: 17/07512 weight: approx. 11 t dimensions: Ø approx. 2.90 m × L approx. 9.52 m × total H approx. 3.30 m Other: Used, in good condition, above-ground storage tank, steel tank on 2 steel bases attached to the tank, former heating oil tank, lid and connections on top of the tank body. The container has been emptied and professionally cleaned inside. According to age, traces of use are present. The container can be used as a storage tank for water and many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your d ...

VA-07. Residual Gas Compression/Process Water (B660) 1 process water tank type BALRG 998 Partial system, 1 process water tank type BALRG 998, Built: 1991 System incl. pipeline system, functional, cleaned Manufacturer: DEHOUST GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 2.0m; Length 8.0m; Mass 5.0t; Volume 24,000 l; Test pressure 2 bar Find more here - / Contact us at -

System: Used tank, storage tank Manufacturer: Dalton Material: Plastic Capacity: 2000 l Dimensions: Lxwxh 2.00 x 0.70 x 1.40m Other: operating pressure, not suitable for fuel oil Tanks: There are two identical tanks are available.

Combined surge arrester module Blitzductor, Profibus single module, for PLC control, lamp holder -3x: 919670 -3x: 919562 -6x: 919506 Price: complete -Weight: 0.5 kg

waste oil collecting tank: . filling capacity: 1000 Liter : . with level indicator: . Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BUHLER impacts dehulling machines suitable for oats, sunflower, spelt, soya and some others.. Almost not used since it was in a store Very nice conception , 18 cm impact ring hence hight output till 3 tonnes per hour according to Handbook manufacturer with an integrated diaphram to set the material flow input With an integrated device to set the speed by hand ... but also be set with speed electronical variator Many other Buhler machines available for dehulling lines : scourer MHXF, paddy table enquiries welcome Shipping to any destination possible

DEHUMIDIFIER MUNTERS ML 180 Desiccant dehumidifier with air-cooled condenser. Designed to efficiently dehumidify unheated enclosed spaces, with operating hours counter. Stainless steel sheet exterior, one-piece, fully corrosion-resistant plastic, with interchangeable front and rear panels for easier installation. Built in 2009. FEATURES - operating temperature: +0 / +25 °C - dehumidifies up to -20 °C - dehumidifies up to low dew point - IEC Protective class (unit): IP33 - IEC Protective class (electrical panel): IP54 - Sound power level to room Lw(A) dB (all inlets and outlets ducted): 75 dB(A) - Filter class: G3 Process Air - Rated airflow: 180 m3/h - Available static pressure: 200 Pa Reactivation Air - Rated airflow: 67 m3/h Condenser - Sensible heat: 1.4 kW - Fan power: 0.3 kW - Rated airflow: 650 m3/h - Available static pressure: 200 Pa  ...

Description MORETTO Dehumidifier Group composed of: Moretto two-tower dehumidifier Power: 16.4 Kw Power supply: 400 V / 3 F + N + T Process temperature: 70 - 150 °C Air flow rate: 120 - 200 m3/h 2 Moretto hoppers Approximate capacity each hopper: 600 dm3 1 Moretto suction valve RIGHT MOLECULAR SEDACCIO REPLACED 12/09/2024, BLOWER WORKS THROUGH INVERTER, WITH 4 CONNECTION PIPES EACH ONE OF 3 METERS.

Available a complete dehulling line for oats, also efficient on spelt, sunflower seeds..output according technical notice about 3 tonnes per hour..Include all the machines in very good condition very very affordable price..Machines are like new.. list of machine available upon request request wellcome delivery to any destination possible.

Dehumidifier ALM 110 R134A 12 bar 230 V Unchecked

Description Moretto double tower wheeled dehumidifier hopper capacity: 60 dm3 air flow: 50 m3/h temperature range: 50°-150° C

Description DEGA Dehumidification System with 2 Receivers controlled by a Blower Heating power: 9 Kw Blower power: 2.2 Kw Total installed power: 18 Kw Refined air flow: 250 m3/h Maximum Process Temperature: 150 °C Hopper capacity: Approximately 650 litres

Description Process resistances: 1.5 Kw Regeneration resistances: 1.5 Kw Temperature range: 70 - 140 °C Air flow: 30 - 70 m3/h Hopper capacity: 150 Dm3 Dew point: -25 - 50 °C Approximate aspirator capacity: 10 Dm3 DEHUMIDIFIER WITH DEHUMIDIFICATION ROTOR AND HOPPER WITH LOAD CELL.

Dehairing machine Manufacturer: HAAS Stainless steel Engine: 2.2kW

Dehumidifier AKTOBIS WDH-520EB, approx. 25 Ltr/day, S/N 20223313

Range consists of 5 x Tristar electric heater and 1 x dehumidifier from Komerci Auction-ID: A1-45495-259

Air dryer ALUP 16/30 bar 230 V 16 A R 134a Unchecked

The new cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with a clear concept. Distinctive features of the K-MT adsorption dryer series such as • Adsorber profiles made of one piece • Separately controlled main and blow-out valves in leak-free design • Compact check valve combination, guarantee continuous operational reliability with high availability at the same time All adsorption dryers of the K-MT series have • Self-cleaning sieve trays on the wet side • High-quality desiccants In adsorption, desiccant stores the moisture contained in the compressed air. Parker Zander uses only high-capacity, high-capacity high-capacity molecular sieve type desiccant. This desiccant guarantees a long service life at high inlet temperatures or low pressure dew points. Regeneration takes place  ...

Size 35x25x50cm, 230Volt Auction-ID: A1-45188-282

Description Voltage: 230 V Heating Power: 2 Kw Hopper capacity: 30 dm3 Air flow: 20 m3/h Temperature range: 50 - 150 °C

Description hopper capacity: 170 lt air flow: 150 m3/h temperature range: 50°-140° C power supply: 220 V 3Kw

Description hopper capacity: 75 lt x 3 hoppers air flow: 150 m3/h temperature range: 50-150 C

Description hopper capacity: 75 lt x 3 hoppers air flow: 250 m3/h temperature range: 50-150 C

Description Moretto heater/dryer group composed of: Moretto three-phase aspirator: V2 D40 Moretto container: C101 R42 Moretto hopper: TC 75 Moretto heater: HG 3 T50 Moretto container: C51 R42 Hopper: TC 50 Moretto heater: HG 2

Description hopper capacity: 30 Lt temperature range: 0 ° -140 ° C power: 3 Kw 400 V power supply

Description hopper capacity: 150 lt air flow: 130 m3/h temperature range: 50°-140° C

Estimated weight: 40 kg Approximate dimensions: 700x450x800h mm Auction-ID: A7-44996-14

Air flow rate: 550m³/h; condensing capacity: 36/44 l/d; condensate container: 8 Kg; operating hours: 1985; Voltage: 220V; power: 0.720 Kw; Temperature range: 5-30° C.Estimated weight: 90 kg Approximate dimensions: 1200x800xh1000 mm Auction-ID: A7-44996-46

This 2015 TOMSA DESTIL Alcohol Dehydration Plant is designed for the large-scale production of high-purity ethanol. It processes distilled alcohol (95.5% v/v) into dehydrated alcohol with up to 99.8% v/v concentration, suitable for beverages, industrial applications, or biofuel. The plant has a nominal capacity of 90,000 liters per day and operates with advanced molecular sieve technology using pressure swing adsorption (PSA), ensuring high efficiency, low energy consumption, and fully automated operation. Condition & Usage The plant was barely used and only produced 2,000 m³ of dehydrated alcohol during its operation, leaving the equipment in excellent condition. Key Features - Capacity: 90,000 L/day dehydrated alcohol (99.8% v/v). - Feedstock: Distilled alcohol at 95.5% v/v. - Technology: Molecular sieve dehydration with PSA system. - Fully automated and continuous operation. Fi ...

Type: David Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Lenght: 340 Height: 250 Delivery time: after advanced payment, the machine is generally refurbished and ready for delivery

Granule dryers, compressed air dryers, continuous dryers, granule drying systems -Manufacturer: digicolor, Granule dryer type Dehumidifying Dryer -Model: DT 204 M -Power: 10000 W -Side channel blower: Siemens Elmo-G 1.5 kW -Individual components: see photos -Dimensions: 1020/610/H1550 mm -Weight: 241 kg

Standard Features 2 roller system for thorough depilation Head scratcher also for the difficult to access head area Mobile on 4 castors Newly developed, reinforced transmission Special rubber racket (also on the back wall) Electric heating in an oil bath Integrated control and operating unit in the machine housing Swing-out rollers for cleaning the machine

Aprovis FriCon Gas Dehumidifier and Desulfurizer Plant for cleaning Biogas. Biogas cleaning plant including APROVIS FriCon 150/500-40-15-2-I0 Gas Dehumidifier and Desulfurizer Plant. Type: ESA 44,8m³ Year: 2019 Fuel: Biogas Scope of supply: Gas Cooler, Air Cooled Liquid Chiller, Base Frame for Gas Dehumidifier, Insulation, Demister DN 200, Syphon. Technical data for Desulfuriser Plant: >3.000 mg/m 3 H 2 S and 600 Bm³/h Gas flow: 600 Bm³/h (at around 37-40 o C) H 2 S-Input concentration: 2.000 ppm (3,000 mg/m³) Gas temperatures (entrance): 25-40 o C H 2 S load: maximum 1.800 g/h Columns pressure loss: < 3-8 mbar Pressure level: 45 mbar (Test pressure 50 mbar) Low pressure: maximum –10 mbar. Minimum inlet pressure: 2-4 mbar Hot water: DN=32 Dung use: app. 3,0 kg per day full load (approx. 110-115 Ct costs 1 kg) Extra air: 11-14 % Container/tank size: approx. ...

Material: 1.4571/ stainless steel Content: 16 ltr Weight: 2000 kg Length x Width x Height: 2500 mm x 1300 mm x 2000 mm Filter area : 0,12 m² Fill : 16 ltr. Working pressure : 25 bar. Further information: Basic application area: - Suspensions with subtle and subtlest solid materials, which need for fast and optimal dehumidification a high adrift pressure difference.. - Dry sludge, those won coal is compressible and throught strong mechanical pressure arrives a drastic reduction of pore volume - Products, at those a widely dehumidification is possible after cake constitution through a displacement of pore fluid through gas - Suspensions, whose need for unproblematic abscission a degressive or a progressive supply of dehumidification potential. Very good condition. You can also get the entire system with all components you need. Write us below!

Used injection molding machine H160 - 2009Technical Specifications & Performance DataThis Husky injection molding machine is engineered for high-efficiency cap and closure production, making it an excellent choice for beverage production environments that require consistent, high-quality outputs. Manufactured in 2009, the unit features a 160-ton clamp force platform paired with a 24-cavity cap mold optimized for 29/25 mm neck finishes. It is supplied with robust auxiliary equipment to stabilize process conditions and streamline operation in an industrial packaging workflow.Manufacturer: Husky Injection Molding SystemsModel: H160 RS45/42Year: 2009Application: Cap/closure molding for beverage packagingMold cavitation: 24 cavitiesClosure specification: 29/25 mm, Free Start CapNominal part weight: 1.20 g (cap)Clamp force: 160 tonsElectrical supply: 400 V, 50 Hz, 3PH+N+PEMain supply current:  ...

Estimated stock: approx. 4 pcs. Advantages: - Optimal airflow through AirSurround technology. The airflow rotates upwards instead of downwards. Cooled air sinks to the bottom. Warm air is sucked in and cooled by the device. - App control. This makes it possible to control the room temperature from anywhere - Magnetic, minimalist and responsive remote control - Circular cover for optimal airflow - Best mobility thanks to discreet wheels The scope of delivery includes: 01x Air conditioner, new Manafacture: AEG Type: PX71-265WT Product dimensions: 955 x 388 x 388 mm Package dimensions: 531 x 459 x 1,190 mm Cooling capacity: 2.6 kW EER: 3.1 Energy efficiency cooling: A+ Heating capacity: 2.1 kW COP: 2.8 Energy efficiency heating: A+ Noise level max.: 64 dB(A) For room size: 30 - 40 m² / 70 - 90 m³ Functions: Heating / Cooling / Fan / Dehumidification / Auto Air Fl ...

Advantages: - Air conditioning efficient and elegant - Ideal conditions for a restful sleep at perfect temperatures - For rooms with a size of 40 - 50 m² - Reduction of potential global warming through environmentally friendly refrigerant R290 - 360° wheels for best mobility The scope of delivery includes: 01x Air conditioner, new Manafacture: AEG Type: ChillFlex Pro AXP35U538CW Product dimensions: 796 x 493 x 420 mm Package dimensions: 885 x 570 x 515 mm Cooling capacity: 3.5 kW EER: 3.1 Energy efficiency cooling: A+ Noise level max.: 64 dB(A) For room size: 40 - 50 m² / 90 - 115 m³ Functions: Cooling / Fan / Dehumidification / Auto Air Flow Volume, Max Cooling: 420 m³/hour Remote control: available with LCD Timer: available Display: LED Display Speeds: Low/Med/High/Auto Dehumidification capacity: 1.6 liters / hour Cooling power consumption: 1.2 kWh / hour ...

Textile cleaning machine Multimatic PIUMA N 320 with distillation module VD 160 Commercial washing machine, used from 2019 Manufacturer: Multimatic GmbH & Co. KG, Maschweg 72-74, 49324 Melle, Germany, e-mail infomultimatic.de, Tel. +49 5422 100-0 Year of Make: 2019 Operating hours read: 4,854 Batches read: 5,923 Description For solvents trade name "Sensene" Drum volume: 320 liters Filling quantity: 16 kg with a filling factor of 1:20 Easily accessible, compact machine platform Basic machine/basic module (W x D x H in mm): 1076 x 1990 x 2140 (990 x 1990 x 1980 mm simply dismantled) Machine structure: - High-spinning, free-swinging drum unit - Resonating tank assembly, consisting of 2 stainless steel tanks with a volume of 80 and 90 litres, to compensate for the kinetic energy during spin-up and to prevent dirt deposits - Tank bottom with double slope - High-quali ...

• Non-EX version • For coating and coating tablets using the film coating process • Drum fully perforated with mixing paddles Smooth SU 4.12, hole diam. 3 mm • Drum material AISI 316L • Drum usable volume 331 litres, drum Ø 1. 450 mm, opening diam. 550 mm • Batch size 79-265 kg (filling volume 30-100%, density 0.8 kg/dm3) • Spray nozzle Glatt GCSD 3.1 with multi-head peristaltic spray pump with pump trolley • Filling chute • SmartScoop discharge with discharge hopper • Supply air system Glatt M6/F9 with temperature and volume flow measurement • Supply air fan • Supply air filter 3. H13 • measuring device for DEHS filter test • Frost protection heating (steam) • Dehumidification 32°C/40% rH, independently controlled • Humidification with preheater • Electric pure steam generator Defensor Mk5 • Bypass shut-off damper during sugar coating • Exhaust air ...

UNDER NEGOTIATION HUSKY GL300 System 48mm +3025 +Edible Oil 32mm + 2921 molds OPPORTUNITY HUSKY GL300 YEAR 1998 MOLDS + 48mm water neck finish 32 cavity complete mold (hot runner) with 2 sets of core (81gr~85gr~91gr.) + 30/25 water neck finish 48 cavity complete mold (hot runner) with 1 core set (16~18.2 gr) + 32mm edible oil (snap on)(wide edible oil) neck finish cold half mold with core set (24~27gr.) + 29/21 edible oil 25 gr neck finish preform change over kit. Auxiliaries: Piovan mold dehumidifier, resin dryer with hopper, and T conveyor 400v 50hz Condition: Fair condition, connected (can be inspected) More pictures upon request USA Line: +1 305 831 8888 whatsapp +5491157143569 j.plaul@optimisense

oven 700 Uterna Europe 80KW 700 Celsius Ziel des Spannungsarmglühens schoenheider ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeumwandlungen, Kaltverformung und durch spanende Bearbeitung. Wichtig für ein gutes Ergebnis ist nicht nur die richtige buerstlein Temperatur, sondern auch eine umsichtige Abkühlung. Nur so lässt sich eine erneute Spannungsbildung vermeiden. Typischerweise findet das Spannungsarmglühen bei Temperaturen um 600 °C (bei zuvor vergüteten Bauteilen jedoch 30-50 °C unter der letzten Anlasstemperatur) statt. Die Wärmebehandlung ist das häufigste Veredelungsverfahren, mit dem die Eigenschaften der Stähle gezielt verändert und ihre optimalen Gebrauchseigenschaften für den jeweiligen Einsatzzweck herbeigeführt werden. Erst durch eine der Stahlzusammensetzung, dem Verwendungszweck und der Baut ...

Description from year 2009 rectangular drying chamber Purchase price per piece was 20,000 euros plus VAT purchased for dehumidifying paper i.e. the bays can be removed

Steel hall, cooling hall sandwich panels clad used used Tem. Range approx. 3-12° C Walls: sandwich panels, PU foam approx. 100 mm Roof: trapezoidal sheet + 2x 60 mm insulation + rubber skin with jumper system and dehumidification The hall is separated in the middle by a partition wall. the cooling system is not part of the offer for the time being. In both halves there are 2 rows of double shelves, in the middle with autom. Shelf assemblers Shelf manufacturer: SCHÄFER Year of construction: 2006 approx. 4700 pallet spaces Galvanized steel sheet Shelf depth: approx. 1000 mm Compartment height approx. 1800 to 2000 mm Compartment width approx. 2900 mm compartment load 2x24 kN field load 537.6 kN Total dimensions approx. 50 x 15 x 30 m (LXWXH) Changes and errors in the technical data, information and prices as well as prior sale reserved.

furnace 1200 1x1x2m t max 1200 Celsius plc auto door various size possible Industrieöfen- Fertigung und Reparatur jeglicher Art Wartung und Einregulierung von Industriebrennern Industrieöfen für Öl, Gas oder elektrisch beheizt Umfangreichen Sortiments an Feuerfeststeinen, Feuerfestmassen, Isoliermaterialen und Gießereihilfsstoffe namhafter Hersteller. Renovierungen und Instandsetzungen von Ofenanlagen Brenner einstellungen von Ofenanlagen Modernisierungen von Ofensteuerungen Umrüstu ng von elektrischen Öfen auf gasbeheizte Öfen Umrüstung alter Heizsysteme auf Rekuperation Öfen Verzinkungsofen Ve rgüteofen Anlassofen Industrieöfen Glühofen Ovens laboratory ovens industrial furnaces industrial furnace plants Industrial Furnaces high-temperature chamber furnaces hardening furnace anlageHärteöfen Annealing furnaces Conveyor belt Abg aswäscher Abkühlungs ...

Description for use in the laboratory and for production Round drying chamber Two-chamber systems with separation valve Folding door Materiali Stainless steel 316TI, 316L Solvent capacitors Automatic cleaning CIP Process visualization Product shells Explosion protection Version GMP compliant version Documentation / qualification from year 2015 Purchase price per piece was 40,000 euros plus VAT purchased for dehumidification of paper i.e. the inserts with the roll transport can be removed

Industrieöfen- Fertigung und zirlguss Reparatur jeglicher Art Wartung und Einregulierung von Industriebrennern Industrieöfen für Öl, Gas oder elektrisch beheizt Umfangreichen Sortiments an Feuerfeststeinen, Feuerfestmassen, Isoliermaterialen und Gießereihilfsstoffe namhafter Hersteller. Renovierungen und Instandsetzungen von Ofenanlagen Brenner einstellungen von Ofenanlagen schoenheider Modernisierungen von Ofensteuerungen Umrüstu ng von elektrischen Öfen auf gasbeheizte Öfen Umrüstung alter Heizsysteme auf Rekuperation gienanth Öfen Verzinkungsofen Ve rgüteofen Anlassofen Industrieöfen Glühofen Ovens laboratory ovens industrial furnaces industrial furnace plants Industrial Furnaces high-temperature chamber furnaces hardening furnace anlageHärteöfen Annealing furnaces Conveyor belt Abg aswäscher Abkühlungsöfen Abwärmerückgewinnung Aluminiumgiessereimaschinen ...

JUST SOLD HUSKY Hypet300 HPP5 P100/100 EE100E 18.000 preforms/h (PV 14,6gr) max. 72 cavities; screw diam. 100mm; max. screw speed 108rpm; stroke 400mm; max. melt pressure 25367psi; incl. viscosity monitor PTI; incl. Plastic Systems DM20L volumetric dosing unit (2018) and PS desiccant hopper MOQOP (2018) and temp. unit HPP5H300; incl. Plastic Systems DSH 3003-C-INT 5.0 coolpik mould dehumidifier; incl. Plastic Systems TB-SD300 double softdrop unloader; NO MOLD INCLUDED max. 400V/172A; total machine dim. L13000 x W4000 x H27500; own weight total 22t; meter reads 7.416/16,6mio pressings exworks EUROPE