degree used for sale

Schneeberger Aries ENP4 CNC Precision Tool Grinding Machine Manufacturer [manufacturer]: Schneeberger Type [ type]: Aries ENP4 Control unit: Fanuc control, 2 CNC axes, simultaneous interpolation 10.4" LCD color touchscreen, RS232 Baujahr[construction year]: 10/2008 Tool and cutter grinder Note: Ideal for tooling and sharpening Optimal grinder for grooving, circumferential, flank, front, rear and flank surfaces Axes Longitudinal travel X mm 400 (CNC) Transverse travel Y mm 260 (CNC) Vertical travel Z mm 300 (CNC) Workpiece rotation A degree free (CNC) C-axis, manual, position indicator integrated in the control unit. Resolution of the measuring system: 0.001°, grinding head ±180° rotatable Center height mm 210 Landing cone ISO50 Spindle Drive power kW 2.2 / 7.5 Double spindle HSK 50 - (2 + 2 grinding wheels) Spindle speed 1/min 9000 Grinding wheel diameter ...

Stock Number: 3815 PROCESSING Manufacturer: MIKRON , Type: HSM 400U Machine NO.: 107.87.00.036, Year of manufacture: 2003 Specifications: Table size Macro Magnum mm Gr. table load 25 kg Longitudinal movement (X) 400 mm Transverse movement (Y) 240 Usable mm Vertical movement (Z) 350 mm Spindle cone HSK-E40 Infinitely variable spindle speeds 0-42,000 rpm Spindle motor 13/10 Kw A-Ash +/- 110 degree B: Ash 360 degrees Tool changer Erowa 99 places Control Heidenhain 530 Fabr. Accessories: Length: 2900 mm + Robot, Height: 2700 mm, Width: 2400 mm, Weight: 5500 kg

degree: 1200° working heigth: 250 mm length: 6000 mm width: 400 mm depth: 250 mm Control: Siemens total power requirement: 99 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 25 x 2 x 3,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dispersion plant Manufacturer : IKA Maschinenbau Type: DISPAX-REACTOR DR 3-13/4 Year of manufacture: unknown Capacity: max. 20,000 litres/hour Technical specifications : Disperser for continuous operation. The maximum discharge pressure is 2.5 bar. Motor 18.5 kW, 3,000 rpm Mechanical seal is connected to the water. In the dispersion chamber there are three stators and rotors in the gradation coarse-medium-fine as standard. This combination can be varied both in order and in the degree of fineness. Documents: available

CNC controller: FS-31IA(MAPPS 3) Capacity Turning length mm: 1.500 Turning diameter f. lower turret mm: ø350 Max. turning diameter mm: ø 660 Swing over cross-slide mm: ø730 Turn-mill spindle X-axis travel mm: 750 Y-axis travel mm: ±210 Z-axis travel mm: 1.550+100(for ATC) B-axis degree: ±120º (1º index) Speed spindle rpm: 12.000 Drive power kW: 18,5/11 (10min/cont) Tool magazine Magazine places: 100 Tool holder: Capto C6 Tool length max. mm: 400 Tool diameter max. mm: ø140 Tool weight max kg: 8 Lower turret X-axis travel mm: 195 Z-axis travel mm: 1.525 Number of tool slots St .: 12 Indexing time s: 0,28 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 22/18,5 (30min/cont) Spindle nose: JIS A2-8 Counter spindle Speed spindle rpm: 4.000 Drive power spindle kW: 22/18,5 (30min/cont) Spindle nose: JIS A2-8 Equipment Chip conveyor Signal l ...

Bimetallic thermometer, thermometer, horizontal, with protective tube, 2 pieces RÖDER 0 to 60 °C Pitch: 1 degree Diameter: Ø 160 mm Flange diameter: Ø 14 mm Sensor: Ø 9 mm, Length: 55 mm Protection tube: Ø 11 mm, Length: 90 mm Screw-in thread: 1/2 inch material protection tube: brass new ! Dimensions ( single thermometer ): 160 x 160 x 130 mm

Bimetallic thermometer, thermometer, horizontal, without protective tube, 3 pieces RÖDER 0 to 60 °C Pitch: 1 degree Diameter: Ø 160 mm Flange diameter: Ø 14 mm Sensor: Ø 9 mm, length: 55 mm New ! Dimensions ( single thermometer ): 160 x 160 x 85 mm

TRUMPF TruLaser 3030 fiber laser built in Germany in 2013, is used for precision machining of workpieces made of structural steel, stainless steel, as well as brass and copper, thanks to special technology data packages equipped in the machine. The extremely efficient and reliable fibre-cutting technology expands the machining possibilities and allows to achieve very smooth and even edges. The laser cutting machine features a robust, durable design that prevents any vibrations from occurring during changes in direction. The enclosed laser body with lift-up roof and fixed guards effectively protect the operator during work. The axes are driven by a direct Torque drive (X-axis) and direct linear drives (Y-axis and Z-axis), which, combined with hardened guideways of the highest manufacture precision, ensure that high accelerations and working speeds are achieved. Generated by the reli ...

Manometric thermometer, with switching contacts MESSGERÄTEWERK BEIERFELD, EAW Type: 3181 111 220 3181 Measuring range: -30 - +50 °C Accuracy class: 1,6 pitch: 1 degree Case diameter: Ø 160 mm protection tube: Ø 18 mm, Length: 100 mm, thread: M27 x 2.0 Length capillary tube: 10 m Switch type: 2/Z 112-1 Switching capacity: 220 V AC / DC 30 W (VA) New, with documents ! Dimensions ( display unit ): 170 x 205 x 105 mm Dimensions ( packaging ): 320 x 320 x 180 mm

Manometric thermometer, with switching contacts MESSGERÄTEWERK BEIERFELD, EAW Type: 3182 111 220 3182 Measuring range: -30 - +50 °C Accuracy class: 1,6 Pitch: 1 degree Case diameter: Ø 160 mm protection tube: Ø 18 mm, Length: 100 mm, thread: M27 x 2.0 Length capillary tube: 10 m Switch type: 2/Z 112-1 Switching capacity: 220 V AC / DC 30 W (VA) New, with documents ! Dimensions ( display unit ): 170 x 205 x 105 mm Dimensions ( packaging ): 320 x 320 x 180 mm

Manometric thermometer, with switching contacts and measuring instrument holder MESSGERÄTEWERK BEIERFELD, EAW Type: 3862 111 220 3862 Measuring range: -30 - +50 °C Accuracy class: 1,6 pitch: 1 degree Case diameter: Ø 160 mm protection tube: Ø 18 mm, length: 100 mm, thread: M27 x 2.0 length capillary tube: 10 m Switch type: 2/Z 112-1 Switching capacity: 220 V AC / DC 30 W (VA) New, with documents ! Dimensions ( display unit ): 185 x 205 x 105 mm Dimensions ( packaging ): 320 x 320 x 180 mm

Manometric thermometer, with switching contacts MESSGERÄTEWERK BEIERFELD, EAW Type: 3863 111 220 3863 Measuring range: -30 - +50 °C Accuracy class: 1,6 Pitch: 1 degree Case diameter: Ø 160 mm Protection tube: Ø 18 mm, Length: 100 mm, thread: M27 x 2.0 Length capillary tube: 10 m Switch type: 2/Z 112-1 Switching capacity: 220 V AC / DC 30 W (VA) New, with documents ! Dimensions ( display unit ): 170 x 205 x 105 mm Dimensions ( packaging ): 320 x 320 x 180 mm

Manometric thermometer, with switching contacts MESSGERÄTEWERK BEIERFELD, EAW Type: 3073 111 220 3073 Measuring range: -30 - +50 °C Accuracy class: 1,6 Pitch: 1 degree Housing diameter: Ø 160 mm protection tube: Ø 18 mm, Length: 100 mm, thread: M27 x 2.0 Length capillary tube: 10 m Switch type: 2/Z 112-1 Switching capacity: 220 V AC / DC 30 W (VA) New, with documents ! Dimensions ( display unit ): 170 x 205 x 105 mm Dimensions ( packaging ): 320 x 320 x 180 mm

Manometric thermometer, with switching contacts MESSGERÄTEWERK BEIERFELD, EAW Type: 2935 111 220 2935 Measuring range: -30 - +50 °C Accuracy class: 1,, 6 Pitch: 1 degree Case diameter: Ø 160 mm protection tube: Ø 18 mm, Length: 100 mm, thread: M27 x 2.0 Length capillary tube: 10 m Switch type: 2/Z 112-1 Switching capacity: 220 V AC / DC 30 W (VA) New, with documents ! Dimensions ( display unit ): 170 x 205 x 105 mm Dimensions ( packaging ): 320 x 320 x 180 mm

Manometric thermometer, with switching contacts GAUGE BEIERFELD, EAW Type: 2936 111 220 2936 Measuring range: -30 - +50 °C Accuracy class: 1,, 6 Pitch: 1 degree Case diameter: Ø 160 mm protection tube: Ø 18 mm, Length: 100 mm, thread: M27 x 2.0 Length capillary tube: 10 m Switch type: 2/Z 112-1 Switching capacity: 220 V AC / DC 30 W (VA) New, with documents ! Dimensions ( display unit ): 170 x 205 x 105 mm Dimensions ( packaging ): 320 x 320 x 180 mm

Manometric thermometer, with switching contacts MESSGERÄTEWERK BEIERFELD, EAW Type: 2712 111 220 2712 Measuring range: -30 - +50 °C Accuracy class: 1,6 Division: 1 degree Case diameter: Ø 160 mm protection tube: Ø 18 mm, Length: 100 mm, thread: M27 x 2.0 Length capillary tube: 10 m Switch type: 2/Z 112-1 Switching capacity: 220 V AC / DC 30 W (VA) New, with documents ! Dimensions ( display unit ): 170 x 205 x 105 mm Dimensions ( packaging ): 320 x 320 x 180 mm

Manometric thermometer, with switching contacts MESSGERÄTEWERK BEIERFELD, EAW Type: 2713 111 220 2713 Measuring range: -30 - +50 °C Accuracy class: 1,, 6 division: 1 degree Case diameter: Ø 160 mm protection tube: Ø 18 mm, Length: 100 mm, thread: M27 x 2.0 Length capillary tube: 10 m Switch type: 2/Z 112-1 Switching capacity: 220 V AC / DC 30 W (VA) New, with documents ! Dimensions ( display unit ): 170 x 205 x 105 mm Dimensions ( packaging ): 320 x 320 x 180 mm

Manometric thermometer, with switching contacts and measuring instrument holder MESSGERÄTEWERK BEIERFELD, EAW Type: 2711 111 220 2711 Measuring range: -30 - +50 °C Accuracy class: 1,6 Pitch: 1 degree Housing diameter: Ø 160 mm protection tube: Ø 18 mm, length: 100 mm, thread: M27 x 2.0 length capillary tube: 10 m Switch type: 2/Z 112-1 Switching capacity: 220 V AC / DC 30 W (VA) New, with documents ! Dimensions ( display unit ): 185 x 205 x 105 mm Dimensions ( packaging ): 320 x 320 x 180 mm

Manometric thermometer, with switching contacts MESSGERÄTEWERK BEIERFELD, EAW Type: 2938 111 220 2938 Measuring range: -30 - +50 °C Accuracy class: 1,,6 Division: 1 degree Case diameter: Ø 160 mm protection tube: Ø 18 mm, Length: 100 mm, thread: M27 x 2.0 Length capillary tube: 10 m Switch type: 2/Z 112-1 Switching capacity: 220 V AC / DC 30 W (VA) New, with documents ! Dimensions ( display unit ): 170 x 205 x 105 mm Dimensions ( packaging ): 320 x 320 x 180 mm

Manometric thermometer, with switching contacts and measuring instrument holder MESSGERÄTEWERK BEIERFELD, EAW Type: 2934 111 220 2934 Measuring range: -30 - +50 °C Accuracy class: 1,6 Division: 1 degree Case diameter: Ø 160 mm protection tube: Ø 18 mm, length: 100 mm, thread: M27 x 2.0 length capillary tube: 10 m Switch type: 2/Z 112-1 Switching capacity: 220 V AC / DC 30 W (VA) New, with documents ! Dimensions ( display unit ): 185 x 205 x 105 mm Dimensions ( packaging ): 320 x 320 x 180 mm

Hand Pipe Bender ROTHENBERGER H+W Plus 8 / 5/16 Pipe diameter (exterior): 8 mm ( 5/16 ) maximum bending angle: 180 degree Bending radius (center tube:) 22 mm used, tested ! Dimensions: 300 x 50 x 50 mm

Key data: 64 , 80 , 400

Execution: Aggregate type: transportable Execution: PTO generator Technical data engine: Engine manufacturer: Tractor Technical data generator: Generator manufacturer: Endress Generator type: EZG 80 / 4 IT / TN-S Generator power: 80 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Manual start Functions: Hand start Switch: Generator switch 4 poles Delivery: Built Dimensions of the PTO generator: Width approx. mm: 740 Height approx. mm: 1.007 Length approx. mm: 1.192 Weight approx. KG: 500 Stock number: 1372 Condition: New Year of construction: 2023 Delivery period: Instant Verl Hours: 1 Location: Verl - Germany Scope of delivery: PTO generator 80 kVA – Brushless with electronic voltage reg ...

Length: 2700 mm Width: 1100 mm Height: 850 +- 150 mm engine output: 0,37 kW Electric capacity: 0,5 kw compressed air: 6 bar Horizontal impregnation system Pro flow for individual parts with rinsing circuit. --------------------------------- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. --------------------------------- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blo ...

x-travel: 10000 mm y-travel: 1600 mm workpiece height: 1900 mm distance between columns: 1859 mm table travel: 10000 mm table load: 20000 kg table speeds: 75 m/min dimension of workpiece: 1600 x 1900 x 10300 mm grinding wheel size: 630 x 180 mm spindle turning speed range: 960 U/min main drive motor: 22 kW table-size: 1600 x 10300 mm swival range +/-: 70 ° Control: Siemens 840D vertical stroke: 3000 mm vertical Stroke: 2200 mm weight of the machine ca.: 74 t dimensions of the machine ca.: - m Machine was retrofitted in 2008 with Siemens CNC, servo motor, drives and ball screw. Equipment of the machine: - CNC control Siemens 840D - Table feed speed continuous -- feed capacity: 75 kW -- motor speed: 1770 rpm -- maximum table speed without load: 75 m/min (AC motor with inverter, speed-dependent motor acceleration rate) -- speed with maximum continuous load: 50 m/min - Tangential grinding h ...

Weibert WJ-KS30S Oscillating edge grinding machine WEIBERT WJ-KS30S with polished veneer 400V 3 KW (4 HP) n=2840 min Work table 960x350 mm Table height adjustment 230 mm Sanding belt back panel 1050x200 mm Belt speed 20 m/sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 HP) Can be switched on/off Machine table and guides made of GREY CAST IRON Quick adjustment of the swivel 90°-45° with degree display Weight of 400 kg Suction nozzle 120 mm Roll pull-out table widening Belt width 200 mm WJ-R00300 Optional at extra charge: Roll extension table widening WJ-R00101 Mitre stop WJ-R00102 Feeder console WJ-R00204 Driving device WJ-R00103

Thermometer, bimetallic thermometer, horizontal, with protective tube HG -20 to 40 °C class: 1.0 graduation: 1 degree diameter: Ø 100 mm flange diameter: Ø 17 mm probe: Ø 10 mm, length: 100 mm protection tube: Ø 13 mm, length: 80 / 100 mm screw-in thread: 1/2 inch, width across flats: 27 mm Material: stainless steel (thermometer, protective tube), brass ( probe ) used, tested ! Dimensions: 135 x 100 x 100 mm

3-axis machine for milling and drilling Working dimensions: X - axis: 4,000 mm Y - axis: 1,200 mm 6 workpiece supports 4 lifting rails for positioning heavy workpieces Rear row of stops medium row of stops (especially facilitates the assignment of the machine with small workpieces) Left-hand and right-hand stops on the side 20 pcs vacuum cups Vacuum pump 90 cbm/h incl. coolant unit for main spindle Stepping mat protection in front of the machine Machining equipment: Milling unit 7.5 kW, 1,500 - 18,000 rpm Tool holder HSK 63 F Spindle water-cooled with separate cooling system Tool change magazine 8 times moving along with the milling spindle Drill head with 21 vertical drilling spindles, pitch 32 mm Spindles can be called up individually ATTENTION: 1 spindle defective Horizontal drill head with grooving unit in crosshead design 0 / 90 degree sw ...

UV Technology UV Oven Stainless, Static multipurpose UV oven, this machine will allow products to be transferred from low care to high care, it uses four removable UV cassettes, it has two doors that open 180 degree to allow access for the product from both low and high care, aperture 500mm x 500mm, 3Ph

Key data: 130 mm, 4000 mm, 2500 mm

TOSHIBA BP-130R22 Year 2007 SPINDLE DIAMETER 5.12" (130mm) TAPER IN SPINDLE #50 VERTICAL TRAVEL, Y-AXIS 100" (2500mm) CROSS TRAVEL, X-AXIS 160" (4000mm) SPINDLE TRAVEL, Z-AXIS 28" COLUMN TRAVEL, W-AXIS 60" TABLE SIZE (BUILT IN B-AXIS) 86.6" X 70.8" TABLE LOAD CAPACITY 44,000 LBS TABLE INDEXING B-AXIS 0.001 DEGREE SPINDLE SPEEDS (3-RANGES) 5-2500 RPM EQUIPPED WITH: TOSNUC 888 CNC CONTROL 60-STATION AUTOMATIC TOOL CHANGER THROUGH SPINDLE COOLANT CHIP & SPLASH ENCLOSURE CHIP CONVEYOR 40/30 HP SPINDLE MOTOR NOTES: INSPECT IN PLANT UNDER POWER

Conductivity/MOhm transmitters for inductive and conductive sensors in the field housing. Degree of protection IP 65. Operation with menu navigation and Communication display. Signal outputs: 0/4..20 mA for conduction Ability and temperature, 2 output Contacts. Continuous polarization compensation. Adjustable: Monitoring of the USP limit, concentration measurement of customer-specific media, Characteristic curves for current outputs.

Optima EC automatic continuous scale 1390-750-1500 RA1259 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 2000 Machine type: automatic checkweigher Total size: approx. 1390 x 750 x 1500 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative ...

Transnorm belt curve conveyor 90° degree right GKF 90°-750-550 IR600 RA1408 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 1805 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 m ...

SCHARMANN HEAVYCUT 2 WFT 150 CNC Floor type Boring Mill Year 1978 Spindle Diameter: 5.9" (150mm) Milling Spindle Diameter: 11.02 (280mm) Spindle Taper: CAT 50 Ram Cross Section: 11.81" x 11.81" (300x300mm) Vertical Head Travel, Y-Axis: 137.79" (3500mm) Column Travel, X-Axis: 712.59" (18000mm) Quill Travel, Z-Axis: 23.43 (595mm) Ram Travel, W-Axis: 27.6" (700mm) Z & W Axis, Combined: 51.03" (1296mm) Spindle Speeds: 5.5-1000 RPM Spindle Feed Range: 0.003-240 IPM Rapid Traverse: 396 IPM Spindle Motor: 70 HP/ 105 HP EQUIPPED WITH: Heidenhain TNC 407 CNC Controls Ram and Spindle Travel Sliding Way Covers On X-Axis Bed Right Angle Head With 1 Degree Manual Indexing Hardened Ways Re-pained recently

ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...

ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2014. Distinguished by its robust and stable construction, the machine ensures a high degree of safety, long-term trouble-free operation and excellent precision, even during the most intensive and demanding machining of e.g. steel or aluminium. The machine’s entire workspace with a length of 3000 mm and a width of 1500 mm is equipped with an extraction table, which effectively eliminates contaminants generated during machining and ensures comfortable working conditions. The JANTAR 2 plasma cutting machine is also equipped with, among others, a state-of-the-art CNC ECS 872 controller, an ECKERT filter fan and double-sided AC servo motors. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC controller: ECS 872 - work table dimensions (L x W): 3000 x 1500 mm - double-sided AC servo motors - plasma source:  ...

AVK DKB 80/500-4TS Self-regulating 500 kVA Emergency Power Generator Technical Data: Generator manufacturer: AvK (A. van Kaick) Aggregate type: stationary Design: Skid frame Generator Type: DKBN80/500-4TS Nominal power: 500 kVA Rated voltage: 400/231V Frequency: 50 Hz Nominal current: 722 A Speed: 1500 rpm Excitation current: 30.5 V Degree of protection: IP 23 Year of construction: 1987 Diesel engine for stationary generators and stationary machines, power generation in continuous operation Engine manufacturer: MTU Engine type: 6V 396 TC 42 Engine power: 440 kW Speed:/21500 1/min Cooling: Water-cooled Fuel: Heating oil EN 590 More items - new and used - can be found in our shop! International shipping costs on request!

Manufacturer: Stemas, Type: 03 TFRD, Year: 2010, Automatisches Rüsten: yes, Automatic width adjustment: yes, Rotating the workstations degree: 45, Work piece width min-max mm: 30 - 100, Min.-max. workpiece length in mm: 200 - 3000, Min.-max. workpiece height in mm: 16 - 30, Sawing station: 2, Saw blade size mm: 250, Holder mm: 30, Engine power kW: ca. 3,5, rpm spindle speed: 6, Drill supports from behind: 4, rotations controlled: 6000, Manufacturer: Stemas, FREE TEXT: 2017 überholt, Year :2010

Soundproof Diesel Generator Set Emergency Generator Set Manufacturer: Lucla Type GLU-33-SK Specifications Continuous power: 30 kVA Standby power: 33 kVA Mains voltage: 400/230 V Amperage: 43.3 A Max. sound level: dB(7m) =78 Engine: KOFO Model: K4100D Intake system: naturally aspirated engine Fuel Injection System: Eddy Number of cylinders: 4 Displacement: 3,613 L Bore x stroke: 100x115 mm Compression Ratio: 20:1 Nominal speed: 1500 r/min Engine power: 33 kW Controller: Mechanical Starting voltage: 12 V Generator: Lucla Model: LU 184GS Phase: 3 Voltage: 400 V / 230V 43.3A Line type: 3 phase 12 cable, Y type Stock: 1 Power factor (cos f): 0.8 Frequency: 50 Hz Continuous power: 30 kVA / 24KW Arousal Type: Brushless, Self-Arousal Voltage Regulation: % ±0.5 Protection class: IP 23 Degree of insulation: H Altitude(above sea level): m =1000 Controller: ...

Inv. Num. : 5788 Type: MC10L-01 Producer: NACHI Created: 2015 Parameters: Control system: NACHI FD11 Total station hours 1: 45 h Total station hours 2: 21 h Number of axles: 6 pieces Welding radius: 2019 mm Source: ESAB AristoMig U5000i Accuracy: 0.06 mm Load capacity in the 3rd axis: 15 kG Wrist load capacity: 10 kg Degree of protection: IP65 Robot travel: 12000 mm Load capacity of the positioner with support tailstock: 1500 kg Frame length of the 1st station: 6000 mm Frame length of the 2nd station: 4000 mm Maximum turning diameter of the clamping device with the part: 1650 mm Carriageway Positioner with support tailstock Controls Security features and fences Automatic Torch Calibration System Hood (2 pieces) Aspirator TIG torch set with filler wire NYTRON Cleaning Station

• Package dimensions L 45-300 mm, W 40-190 mm, H 16-100 mm depending on format set • Output max. 47 cycles/min, the max. output depends on the format and product • For all heat-sealable films (PP/PVC/PE/Cellophane) • Film roll outer diam. max. 320 mm, width max. 425 mm • 90 degree infeed belt • Knife bridge with new knife • Eltex film unloader with discharging bar • Perforation knife • Without tear thread device • Without multi-layer stacker • Various format parts • Contactor control • Electr. connection 230/400V/50Hz

Food extrusion product coating, drying and cooling line SCHAAF TECHNOLOGIE GMBH TYPE 318 COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers the following main advantages: - optimal Rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height: 3270 mm TYPE 284 DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE layer. This ensures processing of extremely sticky coated extrudates. Unlike the conve ...

Indicative Temperature Controller, Tensions Thermometer, with Micro Switch STÖRK Type: SC 15 Measuring range: +20 - +60 °C pitch: 1 degree Housing diameter: Ø 84 mm protective tube: Ø 10 mm, length: 300 mm length capillary tube: approx. 4.5 m switching capacity: 250 V AC, 5 (1) A for panel mounting: Ø 80 mm used, tested ! Dimensions ( display unit ): 100 x 84 x 84 mm

Key data: 68 KW, 85 kVA, 400 V

PTO generator 85 kVA for field operation, optionally also for yard operation Aggregate type: transportable Design: Weatherproof IP 44 PTO : 540 Technical Data Generator: Generator manufacturer: WA Generator type: WA-ZB 85/4 Gene. No.: on request Generator power: 85 kVA Dimensions of the unit: Width approx. mm: 800 Height approx. mm: 923 Length approx. mm: 1,204 Weight approx. KG: 386 Scope of delivery: PTO generator for field operation, optionally also for yard operation, building seizing with 1H socket according to VDE 0100-551 with synchronous three-phase generator, incl. electronic voltage regulator AVR in protection class IP 44 (splash-proof) Gearbox for 540 PTO Tractor power / min. KW 125 Tractor power / min. hp 170 PTO speed / rpm 400 Generator speed / rpm 1,500 Required PTO / NM 2.671 Sockets / Mennekes / PCE  ...

Tool setting device, tool presetting device, milling cutter setting device -Spare parts carrier: not ready for use -Handover in the current condition as inspected -Note: Pc/computer is missing, handover as in photos -Measurement range X-axis radius: 310 mm -Z axis: 500mm -Display accuracy: 0.001 mm -Viewing unit -Projector: Ø 150mm -Magnification: 20x -Crosshairs -360 degree protractor -Vernier: 10min -Dimensions: 1600/900/H2100 mm -Weight: about 800 kg

Tool setting device, tool presetting device, milling cutter setting device -Measuring range X-axis radius: mm -Z axis: mm -Display accuracy: mm -unit of observation -Projector: mm -Enlargement: -Crosshair -360 degree protractor -Dimensions: 570/1720/H1875 mm -Weight: 387kg

Rotary drive for air flaps, rotary air flap drive -Type: GCB136.1E -3-point, 5 Nm, 2 auxiliary switches -Maintenance-free, reversible synchronous motor -overload-proof through magnetic hysteresis coupling -robust and light plastic housing on steel base plate -Hand adjustment and position indicator -Built-in, freely adjustable pair of auxiliary switches Technical specifications: -Run time: 150 s at 50 Hz with a 90 degree angle of rotation -Nominal rotation angle: 90 degrees -Max. Rotation angle: 95 degrees -Operating voltage: 24 VAC -Power consumption: 2 VA -Auxiliary switch setting range 0...90 degrees -Housing protection class: IP 40 -Weight 0.8 kg

Temperature controller, temperature sensor, setting for temperature -Type: QAE2120.015 -Passive sensors for recording the water temperature in pipes and containers. The sensors are used in ventilation and air conditioning systems for: -Regulation and limitation of the flow temperature -Limitation of the return temperature -Control of the hot water temperature -Immersion length: 150 mm -Immersion temperature sensor with protective tube -Technical specifications: -hreaded nipple: G1/2A, PN10 -Degree of protection: IP 42 IP 54 with cable gland -Measuring element: Ni 1000 Ohm -Application range: -30...+130 °C -Connection: 2-wire -Weight: 0.3 kg

Gear motor, electric motor, electric gear motor -Speed: 20 rpm -Power: 0.25kw -Diameter shaft: Ø 30 mm -Type: B5 - Degree of protection: IP 33 -Brake: 220V -Number: 1x motor available -Dimensions: 510/210/H220 mm -Weight: 27kg

Gear motor, electric motor, three-phase motor -Speed: 64 rpm -Power: 2.2kW -Construction: B3 -Diameter shaft: Ø 60 mm - Degree of protection: IP 33 -Dimensions: 680/295/H420 mm -Weight: 103kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 256 rpm -Power: 0.55kW -Construction: B3 -Diameter shaft: 25 mm - Degree of protection: IP 33 -Number: 1x available -Dimensions: 405/200/H210 mm -Weight: 22kg