128,878 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
Description DEGA Dehumidification System with 2 Receivers controlled by a Blower Heating power: 9 Kw Blower power: 2.2 Kw Total installed power: 18 Kw Refined air flow: 250 m3/h Maximum Process Temperature: 150 °C Hopper capacity: Approximately 650 litres
Description Three-phase suction unit with receiver DEGA aspirator: GR 1 Hp92 Voltage: 380 V 50 - 60 Hz Power: 0.7 Kw Approximate container capacity: 10 L
Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: DEGA, side channel blower/side channel compressor with filter -Type: 2XHB510H26 -Drive: 1.6 kW -Speed: 2850 rpm -Flow rate: m³/h -Compaction pressure: 200 mbar -Overall dimensions: 570/800/H830 mm -Weight: 57 kg
Description Voltage: 380 V Approximate capacity: 350 L Motor power: 0.37 Kw Loading hopper: No Width: 800 mm Length: 800 mm NEW GEARBOX AND WHEELS.
Description hopper capacity: 170 lt air flow: 150 m3/h temperature range: 50°-140° C power supply: 220 V 3Kw
Description Single Phase Suction Unit Voltage: 230 V Approximate Capacity: 10 L
Description Three-phase Suction Unit with receiver. Voltage: 380 V Power: 2.2 Kw Approximate container capacity: 15 L
Description Three-phase Suction Unit with receiver. Voltage: 380 V Power: 2.2 Kw Approximate container capacity: 10 L
Description Three-phase Suction Unit with receiver. Voltage: 380 V Power: 2.2 Kw Approximate container capacity: 10 L
Description Dispenser for printed parts Height on unloading: min. 550 max 750 mm Height on loading: min. 950 max 1190 mm
bore depth: 500 mm table surface area: - mm spindle speed:: 1 dimensions of the machine ca.: - mmxmmxmm weight: - t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station, drying container -Manufacturer: Helios, Drying container granulate dryer type GDM -Dosing system: GDM650-2 -Tank: 1010/770/H600 mm -Individual components: see photos -Quantity: 1 device available -Dimensions: 1170/800/H2780 mm -Weight: 521 kg
Leda Mattiello Extrusion line 160 mm 50 LD 2 degassing pumps, under refurbishing, ENERGY SAVING IR heaters, for PP PS PE ABS PC, etc., Very good quality extruder, 3 m3 ca. storage silo, crammed vertical screw for light materials with adjustable speed,, extruder with 160 mm. screw, 50 L/D, n.8 Infra Red Petrelli Heaters x 11 kw each V.380 - for great energy saving, 315 kw a.c.Sever drive with inverter (about 60% power used in work), Gefran inverter, n.2 vacuum degassing pumps, semi-automatic screen-changer 320 mm Ø screens (possible configuration with fully automatic scren-changer), horizontal water ring pelletizer - or different, drying centrifuge, closed water cycle, Zambello gearbox with oil recirculating pump, oil-water heat exchanging unit, Control cabinet for managing the whole line including thermoregulators, etc., Nominal throughput rate 800-900 kg./h depending on material., The ...
Roller conveyor curves/ 90 degree curves -motorized Year of Make: 2016 Manufacturer: Soco System Condition: Used Model: Castors with drive Type: 90 Degree Curve Total width outside: approx. 2000 mm Total width inside: approx. 230 mm Total width incl. motor: approx. 1000 mm Total width without motor: approx. 830 mm Conveyor width: approx. 810 mm Roll width: approx. 610 mm Inner radius: approx. 600 mm Material: Steel/ Plastic Color: Galvanized/ Black/ Blue Including 2 motors Soco System (0.12 KW) Including side guide outside: approx. 190 mm high Includes 2 feet (height adjustable) Stock: 4 pieces Price per piece Internal Article Number: 2026021102 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your ...
TECNOVA RECYCLING EXTRUDER for BIO - PE PP ABS PC PS, Barrel with 90 mm screw diam. 37 L/D, Crammed feeding unit, Is working with BIO at 70 rpm yielding 270 kg/h, with PE at 100 rpm yelds 120 kg/h, N.1 degassing point, hydraulic screenchanger, water ring pelletizer from Gamma Meccanica, drying centrifuge, rotating classifier, electric cabinet for omplete management of the line, availability: 4 weeks for reconditioning or 1 week for AS IS, capacity: 120-270 kg/h, conditions: reconditioned, type: 90 mm. crammed feeder for light scraps
TECNOVA RECYCLING EXTRUDER, for PE PP PS PC ABS, Barrel with 130 mm screw 54 L/D, as new screw and barrel, n.2 degassing pumps for slightly moist or heavy prints, hydraulic screenchanger, hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet for complete management of the line, in need of reconditioning, capacity: 500-600 kg/h, conditions: reconditioning needed, type: 130 mm. 54 L/D 2xdegassing points 500-600 kg/h nominal throughput rate
Roller conveyor curve 90 degrees Manufacturer: Soco System Condition: Used Model: Rollers Type: 90° degree Total width outside: approx. 1430 mm Total width inside: approx. 820 mm Total width incl. motor: approx. 580 mm Conveyor width: approx. 410 mm Roller spacing: approx. 60 mm Wheelbase: approx. 110 mm Roller Type: Plastic Material: Steel/Plastic Color: Zinc Plated, Light Gray, Orange Including 2 motors Soco 0.12 KW Stock: 4 pieces Price per piece The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Internal Article Number: 2026020302 Pick-up address: Industriestraße 5 (47918 Tönisvorst) Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutio ...
GEA Fuellpack vacuum water degassing system / degassing system. Residual oxygen
2 pieces curve belt conveyor 180 degrees, helix for climbing bands with SEW - used -: Price per piece from location: 2.995.-€ (net)! Manufacturer: Transnorm Type: 1600-105 Helix Built: 2011 Conveyor curve 180 degrees Nominal radius: 600mm Rated width: 700mm Condition: good Available: now Location: Bautzen warehouse
approx. 15 pieces Transnorm conveyor curve 45 degrees - used - : Price per piece: 950.-€ (net), dismantled and loaded! Manufacturer: Transnorm Year of construction: 2010 Type: 1600-105 Nominal angle: 45 degrees Nominal briete / belt width: 800mm Belt type: KT 96 Nominal radius: 900mm SEW Engine Condition: good Available: now Location: Camp Frankenberg
Bous Waschfix WSA 70 T3 Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix WSA 70 T3 Usable space: 700 mm Filling quantity: 180l / 180l Temperature +70 / +70 °C Heating: 12 / 6 kW Extraction: 0.25 kW Drying: 5 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 54 A 400 V Year of construction: 2009 Extras: Ultra-fine filters Draining pump Filter monitoring More items - new and used - can be found in our shop! International shipping costs on request!
Bous Waschfix 70/T3 WSA Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix 70/T3 WSA Extras: Ultra-fine filters Draining pump Filter monitoring More items - new and used - can be found in our shop! International shipping costs on request!
Bous Waschfix T6/70 WSA Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix T6 / 70 WSA Usable space: 700 mm Filling quantity: 280l / 280l Temperature +70 / +70 °C Heating: 18 / 12 kW Extraction: 0.56 kW Drying: 11 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 84 A 400 V Year of construction: 2014 Extras: Ultra-fine filters Draining pump More items - new and used - can be found in our shop! International shipping costs on request!
Bous Cleaning system degreasing - The Bous Trowamat RL 200 CP V is a compact and efficient cleaning system designed for cleaning and degreasing smaller concrete tools and equipment, such as hand trowels, floats, and other handheld construction tools. It is part of Bous GmbH´s line of cleaning machines, which are widely used in the construction industry for maintaining and prolonging the life of equipment. Find more here - / Contact us at -
CDM PREALPINA REGRANULATING LINE 130 mm 2xdegassing, for PE PP PS PP PC ABS (it has been working with clean scraps only), extruder with 130 mm. screw Ø 40L/D, including buffer silo with agitators, horizontal extraction screw, crammed feeding unit synchronized to extruder screw, a.c. 283 kw drive, n.2 degassing pumps, semi-automatic screen changer 230 mm diam.screens , water ring pelletizing unit, stainless steel drying centrifuge, vibrating screen, electric cabinet, blower + pipings, vertical mixer, machine reconditioned, can be fitted with a [FIMIC RAS](.germanplast/listings/5241333-refurbished-fimic-ras-400-automatic -screenchager-reconditioned) fully automatic screenchanger, installed power - used power in work: about 60-65% : 435, capacity: 500-600 kg/h, availability: 5 weeks time, options available: fully automatic screenchanger, conditions: refurbished, type: double degassing for ...
Roller conveyor curve 90 degrees Condition: Used Model: Rollers Type: 90 degrees Total width outside: approx. 1840 mm Total width inside: approx. 1080 mm Width incl. motor: approx. 630 mm Conveyor width: approx. 500 mm Roller spacing: approx. 100 mm Wheelbase: approx. 60 mm Plastic castors Material: Steel, Plastic, Aluminum Color: Light Gray, Black SEW motor included Stock: 2 pieces Price per piece Internal Article Number: 2026032601 The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Pick-up address: Industriestraße 5 (47918 Tönisvorst) Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent p ...
Roller conveyor curve 90 degrees Condition: Used Model: Rollers Type: 90 degrees Total width outside: approx. 1840 mm Total width inside: approx. 1080 mm Width incl. motor: approx. 630 mm Conveyor width: approx. 500 mm Roller spacing: approx. 100 mm Wheelbase: approx. 60 mm Plastic castors Material: Steel, Plastic, Aluminum Color: Light Gray, Black SEW motor included Stock: 2 pieces Price per piece Internal Article Number: 2026032601 The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Pick-up address: Industriestraße 5 (47918 Tönisvorst) Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent p ...
90 Degree Curve / Curve / Conveyor / Conveyor Belt Manufacturer: Transnorm Type / Model: 1500-80 Belt Type: KT58 Condition: Used Total length outside: approx. 1750 mm Total length inside: approx. 770 mm Total width incl. motor: approx. 730 mm Total width without motor: approx. 600 mm Conveyor width/ belt width: approx. 500 mm Strap Type: Smooth Material: Aluminum/ Steel Including SEW motor (0.37 KW) Stock: 2 pieces Price per piece The conveyor system has run until it was dismantled. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined convey ...
DATA ON THE MACHINE Machine type: Roller curve conveyor / 90 degrees Manufacturer: Transnorm Model: 816-500 Built: 2007 Condition: very good (used) Price 1,200 Euro net plus VAT Location Warstein , Germany Reference M-TRA-0221 Description We offer you a used roller conveyor from the manufacturer Transnorm, incl. feet. For more data, see typeplate. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!
Roller conveyor / pulley conveyor curve 90 degrees Manufacturer: Costo Year of Make: 2009 Condition: Used Model: 90 Degree Curve Total width outside: approx. 2250 mm Total width inside: approx. 1140 mm Total width: approx. 800 mm Conveyor width: approx. 740 mm Total height including side guide: approx. 220 mm Material: Steel Frame height: approx. 120 mm Stock: 2 pieces Price per piece Condition: fully functional, with signs of wear Feet to be ordered separately Material: Steel Ideal for fast material transport Expertly dismantled and packed Internal Article Number: 2026031202 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, ...
Belt curve conveyors, conveyor belt curves, belt curves 60 degrees with drive Manufacturer: Transnorm Year of Make: 2020 Condition: used Model/Type: TS 1600-090/60Degree Total length outside: approx. 1330 mm Total length inside: approx. 550 mm Dimensions: RN: 600, BN : 600, WN: 60 deg Conveyor width: approx. 600 mm Belt type: Belt with fabric insert Including side guide 200 mm high Includes SEW motor with Moyimpt version 1.1 KW r/min 2900/504 Stock: 3 pieces Price: per piece Internal Article Number: 2026032304 Conveyor technology – reliable and immediately ready for use The conveyor technology offered was in continuous operation until dismantling and is fully functional. Features: • Condition: fully functional, with usual signs of wear • Ideal for efficient and fast material transport • Professionally dismantled and packed safely for transport P ...
properties: Used belt conveyors curve 90° Transnorm Condition: Fully functional with traces of use Ideal for fast material transport Expertly dismantled and packed Incl. motor 0,55Kw and side guide Feet to be ordered separately Color: Silver/ Yellow 1 pc in stock specifications: Dimensions of the belt conveyor curve 90° Type: 1600-105 Total outer width: 1,820 mm Total width inside: 750mm Total width incl., motor: 870mm Curve angle: approx. 90° degrees Belt width: 500mm Strap Type: Gripp Frame height: 220mm Material: Aluminum / Steel Belt conveyor curve Due to the excellent workmanship of the belt conveyor curve, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, Schraegfoerderer or telescopes for loading and unloading your goods, we ar ...
Vacuum water degassing system Manufacturer : GEA/Füllpack Type: ONEX Capacity: 30,000 L/hour, 300 HL/hour Technical specifications : The facility is 2-stage Residual oxygen content
MARIS TWIN SCREW EXTRUDER, Loading hopper for regrinds, Barrel with 2 x 92 mm screws 40 L/D, co-rotating parallel screws for polyolefines, CEAR d.c.motor, N.2 vacuum degassing pumps, 4-plate semi-automatic screenchanger, hydraulic pack, Average throughput rate around 1 Ton/h, Water ring pelletizer, drying centrifuge, Electrical control panel, The machine is offered as is or checked
Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Webbing Curve/ 45 Degree Curve/ Conveyor Curve Year of Make: 2011 Manufacturer: Interroll Condition: Good (Used) Outer length: approx. 2100 mm Inner length: approx. 800 mm Total width incl. motor: approx. 1500 mm Total width without motor: approx. 1300 mm Belt width: approx. 1050 mm Conveyor width: approx. 1000 mm Height of the side guide: approx. 200 mm Material: Steel/ Aluminum Color: Galvanized -Blue Including SEW motor (0.75 KW) Including side guide Stock: 2 pieces Price per piece Internal Article Number: 2026022402 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for you ...
Construction site price: 2x 180 degree belt curve conveyors, Transnorm, 1600-105 – used - Price per piece ex location: only 2.950.-€ (net) dismantled, packed and loaded! Manufacturer: Transnorm Type: 1600-105 Year of Make: 2008 Strap width: approx. 80cm Dimensions: Height incl. border: approx. 84cm Outside / outside: approx. 3.30m Incl. feet Condition: good Available: immediately Location; Heilbronn
180 Degree Belt Curve Conveyor, Transnorm, TS 1500 -100 – used - Price ex location: only 2.500.-€ (net) dismantled, packed and loaded! Manufacturer: Transnorm Type: TS 1500 -100 Year of Make: 1997 Nominal width: 700mm Inner radius 500mm Conveyor winch: 180 degrees Belt Type: KT 94 Dimensions: Incl. feet For further dimensions see sketch (measured without the engine) Condition: good Available: immediately Location: Frankenberg warehouse site
• Industrial Parts Cleaning Plant / Metal Degreasing Plant • Manufacturer: Pero AG Maschinen- und Apparatebau, D-86343 Königsbrunn • Type: V1/1/5-EX 6800 • Year of construction: 2008 • EX version Execution • Closed continuous cleaning system • Roller conveyor feeder with infeed and outfeed • Siemens SIMATIC Touch Panel Control • Integrated control cabinet • CE marking available • Electrical main switch mounted on the side • Heating capacity: 16 / 8.8 kW • Connection: 400 V / 50 Hz • Rated current: 34 A Dimensions (estimated by size) • Total length: approx. 5,500 mm • Overall width: approx. 2,200 mm • Total height: approx. 2,500 mm • Internal flow width: approx. 600 – 800 mm • Internal flow height: approx. 400 – 600 mm Weight (estimated) • Machine weight: approx. 4,000 – 6,500 kg • Transport w ...
DATA ON THE MACHINE Machine type: Roller conveyor / roller conveyor Manufacturer: Transnorm Model: 2900 Built: 2007 Condition: very good (used) Price 950 Euro net plus VAT Location Warstein , Germany Reference M-TRA-0221-1 Description We offer you a used roller conveyor from the manufacturer Transnorm, excluding feet. For more data, see typeplate. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!
10 chisels to hydraulic dismantling hammer Sandvik Rammer size G100 and G120. 3 chisels are new 7 chisels are freshly forged.
maximum number of results exceeded
please refine your search
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
500 € 
