deep hole used for sale

film width: 362mm, equipped with 2 residual film wrappers, 1 SIENS SIMATIC TP27 touchscreen Auction-ID: A1-43573-204

equipped with touch panel and pallet with accessories Auction-ID: A1-43573-205

IN WORKING CONDITION. TESTED FOR FUNCTION. There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-44605-96

A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026.

Bio-Rad Reaction Module 96W Deep Auction-ID: A7-45427-107

Used Multivac packer type R 530. Year of manufacture 2007. 400V, 50Hz, phases 3+N, power 20.5 kW, current 47A. Bottom foil, hard width: 450mm, thickness: 400um Top foil soft width 450 mm, thickness 88um Included : Spare sealing plate, seal for the sealing mold, inserts for changing the depth of the extruded film, basic set of spare parts, manufacturer's documentation and user manual, templates for inserting the product, traverse for printing on packaging from a Hitachi printer, spare cutting die cut sharpened by Multivac packed in a box. Capacity 10 beats per minute (8 pieces per cycle)

New unused This 12 volt 85 ah Varta LAD85 AGM Deep Cycle battery has the latest technology and is therefore the suitable battery for the latest boats, yachts, campers, caravans and electric outboard motors. The battery is also ideal for seasonal use, so you don't need to charge it extra when you take your boat or motorhome out of storage in winter. In addition, it is also extremely suitable for Dual Power and can therefore be used for starting and for the power supply of the electrical consumers. The LAD is perfect as: light battery, on-board battery, service battery, leisure battery and anything else that consumes more power and of course also as a starter battery. Due to the low internal resistance, the battery is charged faster and it ensures that high power can be extracted from the battery for a long time. The LAD 85 incorporates state-of-the-art battery technology and has up to 8 ...

Power: 22 HP, 2880 min-1 EMB electric motors AG Switzerland Stainless steel housing Hopper with feeding screw Dimensions: LWH = 400x400x1300mm (without screw) Weight: 300 kg

Standard equipment; Ready

Slot boring machine Scheer L x W x H: 70 x 60 x 140 cm Weight approx. 400 kg Built in 1975 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Pneumatically driven punching, Horizontally arranged. Pedicure Manufacturer: Meuleman Engineering BV Vosseboerweg 7 7683 SH Den Ham (Ov) Punching force 200kg Special price

Mechanical punch with a punching force of 1000kN. tool holder for stamps up to 90 mm can be mounted on request. A wide range of stamps and dies is included in the scope of delivery.

Maximum punching force: 650 kN More performance data see nameplate or on request Inclusive range of punches and matrices

Size: 3,000 mm x 1,200 mm -no attacks -without pressing cylinders

Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.

pressure: 110 t : Ø 40x20 mm throat: 500 mm engine output: 9 kW no. of strokes: 28 Hub/min stroke max.: 80 mm weight: 3150 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

In-line hole drilling machine Scheer DB 4 L x W x H: 1500 x 1500 x 1900 mm Weight approx. 1000 kg Built in 1980 1 aggregate vertically up 1 aggregate horizontal - vertically pivotable The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Table top height: 910 mm Table top size: 700 x 380 mm Max drilling depth: 145 mm Max long hole length: 240 mm Height adjustment distance 135 mm Engine power: 1.5 kW Voltage: 400 V / 50 Hz Speed: 3,000 rpm Net weight: approx. 200 kg Suction nozzle: 100 mm Dm Dowel drilling device: Pitch 16, 22, 25, 32 mm with precision grid roller Driving equipment: Yes Frame stop 90°: pluggable Two-jaw chuck: up to 20 mm clamping range Hand eccentric tensioner: 1 piece 1 Lever control: Yes Measuring clock in handwheel: Yes Miter stop: Yes, double angle adjustment stop from 22.5° to 75° infinitely adjustable

WEIBERT WJ-LB2 Long-hole drilling machine WEIBERT WJ-LB2 400V 2.2 KW ( 3 hp) n=2840 min. Drilling table size 600x320mm Drilling table height 870mm Drilling depth 245mm Drilling width 205mm Height adjustment 165mm Swivel ling unit swivel -45°/90°/+45° Machine table made of GREY ING! Manual adjustment with handwheel! AGGREGAT AND TABLE FROM MACHINE GREY! G&WJ-LB2 option: Dowel drilling device available with pitch 16-22-25 and 32mm G&WJ-LB-DÜBEL

Key data: 65 t, 57 mm, 305 mm

METALLKRAFT Profile steel shears / hole punch HPS 65 DS Combined hydraulic profile steel shear and hole punch with punch, notching station and flat steel, angle steel and profile steel shear - for simultaneous work on punch and profile steel shear Punching station - Punching pressure: 65 t - Punching capacity: max Ø 26 x 20 / Ø 57 x 10 mm - Projection: 305 mm - Stroke: max. 55 mm - Number of strokes: 25 strokes/min - Working height: 900 mm Steel bar shears - Round cutting capacity: max. Ø 45 mm - Square cutting capacity: max. 45 x 45 mm - Angle steel shears - Cutting capacity L-profile 90°: 120 x 120 x 12 mm - Cutting capacity L-profile 45°: 70 x 10 mm - Cutting capacity U-I profile: 120 x 58 mm - T-profile cutting capacity: 90 x 11 mm - Working height: 1,140 mm Flat steel shears - Cutting capacity 90°: max. 300 x 20 / 375 x 15 mm - Angle cut 45°: max.  ...

Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stroke: 70 mm work height max.: 1094 mm throat: 500 mm : 40 in 14 mm no. of strokes: 20 Hub/min throat: 500 mm : 80 to engine output: 9 kW range L-W-H: 1980x1150x2000 mm weight: 2000 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t hole diameter in sheet thickness: Ø 40 in 10 mm throat: 500 mm stroke: 60 mm : 38 /min. engine output: 5 kW weight of the machine ca.: 1.150 kg Overall size: 1500x1100x2000 mm Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t hole diameter in sheet thickness: Ø 40 in 10 mm throat: 750 mm stroke: 60 mm : 38 Hub/min engine output: 5 kW weight of the machine ca.: 1.885 kg Overall size: 1500x1100x2000 mm Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 500 kN hole diameter in sheet thickness: Ø 27 in 13 / Ø 28 in 10 mm no. of strokes: 23 Hub/min throat: 130 mm stroke: 30 mm total power requirement: 3 kW weight of the machine ca.: 295 kg Overall size: 1100x900x1550 mm Standard equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Hole diameter approx. 44 , 45 , 48 , 52 , 2 x 55 , 2 x 58 , 61 , 66 mm 2 x 68 , 2 x 80 , 81 , 85 mm - Long hole dimension approx. 12 x 42 , 12 x 50 , 18 x 55 mm - Stamp holder 58 mm - Stamp height 54 + 58 mm - Adapter ring for stamps - Die height 30 + 40 mm - Die outer diameter 90 + 140 mm - Adapter ring for matrices 90 - 140 mm - Weight approx. 90 kg

New VDL 2D chiseling machine with the possibility of automatic drilling at distances of 25 and 32 with the possibility of tilting and turning in 2 directions. Technical parameters: Control of the machine with 1 lever Power of the main motor: 1.5 kW Tool speed: 2850 rpm Spindle diameter: 3 - 16 mm Stroke of the spindle: 180 mm Dimensions of the table: 600 x 450 mm Weight of the machine: 320 kg

Flange bearing -Bore: Ø 100 mm -Mounting hole: Ø 26 mm -Dimensions: 264/264/H60 mm -Weight: 11.4 kg

Precise and heavy machine for drilling slotted holes. The maximum hole length is optional. In the standard version, it is 400 mm. The tool is fixed. The height is adjusted by raising the work table. Spindle power: 1.5 or 2.2 kW

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -with: drill holes -Width: 395 mm -Length: 495 mm -Height: 30 mm -Weight: 53.5 kg

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -with: holes -Width: 400 mm -Length: 500 mm -Height: 30 mm -Weight: 45 kg

Clamping plate with T-slots, plate field, welding table, welding table, pallet changer -comes: from a CNC machining center -Width: 440 mm -Length: 400 mm -with: support ribs -with: instep index -Number: 2x plates available -Price: per piece -Weight: 74 kg

Offer here a post Cewe stand units partly still packed in all paper and unused partly already used or not quite complete anymore the tools have not been used for a bit longer but still in the functional state retail sale possible

Ayen Knothole Drilling Machine ED 08-4, Machine No.:270 316, 0,6kW, 380volt, 1420 rpm,

Flange bearing -Bore: Ø 20 mm -Mounting hole: Ø 12 mm -Bore distance: 64 mm -Dimensions: 130/130/H50 mm -Number: 16x available -Price: per piece -Weight each: 1.7 kg

Paneling Finn-Power Bending Automation Mod. Bending Cell Type BC 2550 200 year 1999 Hours: 27.800 This machine is in good condition and worked for few hours. I point out to you that there is an oil leak wich comes from a cylinder. The machine is functioning and in case of your visit, it can be connected again.

T-slot plate, clamping plate with holes, plate field, welding table, welding table -Dimensions: 3012/2010/H710 mm -Panel thickness: 82 mm -Plate: with supporting ribs -Weight: 3370 kg

-) 2-jaw drill chuck 20 mm -) Dowel drilling device with 4-compartment grid 16-32-22-25 mm -) 90° frame stop pluggable -) Miter stop 45° and 22.5° pluggable -) Moving equipment -) Workpiece clamp manual 2 pieces -) Suction connection D 100 mm Optional accessory: -) Gauge in handwheel -) infinitely variable double angle miter stop -) 1 lever operation -) switchable pneumatic stroke for two planes -) Leaser on request

Clamping plate, plate field, welding table, welding table, plate boring machine, surface plate, -with: holes -Width: 1000 mm -Length: 1000 mm -External height: 150 mm, panel thickness 100 mm -Number: 7x plates available -Price: per piece -Weight: 720 kg/piece

Specifications: - Printing capacity 50 T - Outreach approx. 360 mm - Installation height approx. 240 mm - Drive 400 V / 7.5 kW - punches in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - Space requirement approx. W 1000 x H 1900 x D 1000 mm - Weight approx. 1800 kg

offer 22273 Specifications: - Stroke 30 mm - Air consumption per stroke 5 l - Pneumatic connection 8 bar - Space requirement approx. W 500 x H 550 x D 500 mm - Weight approx. 70 kg - with: - Foot switch - Machine base mobile W 600 x H 830 mm - Various tools HUECK

Flange bearing 4-hole -Bore: 35mm -Outside: Ø 135 mm -Price: per piece -Quantity: 1x available -Weight: 1.2 kg

2-hole flange bearing -Type: 01CJT05 -Designation/Type: Flange bearing unit -d = Inside: 25 Price: per piece -Number: 71x available -Weight: 0.6 kg/piece

Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Table surface: 995 x 197 mm, height 995 mm -Wall thickness: 39 mm -Bores: M20 -Clamping grooves: 172 x 21 mm -Dimensions: 995/197 / H995 mm -Weight: 160 kg

Punching force: 1000 kN Weight: 2400 kg For example, punches a 40 mm hole in 20 mm steel Stroke release via foot switch Includes viewfinder for graining and setup Assortment of tools is included in the price

Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Flange bearing, housing bearing, flange bearing unit -Manufacturer: PTI, flange bearing unit type FWS40U -Bore: Ø 40 mm -Mounting hole: hole spacing 102 x 14 mm -Number: 3x flange bearing available -Price per piece -Dimensions: 128/128/H50 mm -Weight: 2.2 kg/pc.

HofmannLangloch drill Brand Hofmann Type LL150 Year of construction Specifications: drilling depth max. 145 mm (drill head movement) Drilling length: max. 230 mm (table movement) Vertical drilling spindell run max.135 mm Drilling: Drilling depth limitation Table: side ward movement via sep. Handle Cast iron table: solid with mechanical product clamp Height adjustment: Handwheel Motor power 1.3 kW Chuck 5 - 20 mm Condition: functionally tested

Hole unit Horizon HP-20A (Condition - like new - hardly used) Art.: PS5567 specialized module for high-quality punching. The HP-20A module will be integrated into the Horizon brochure line between the Horizon SPF booklet maker and the Horizon FC trimmer. In normal brochure sewing mode, it acts as a simple transition tape. However, it is worth activating it on the central control panel, it is immediately included in the duty cycle.