137,138 used machines on RESALE, but how to find them? Machine Search
Manufacturer: INOTEC Type: I225 Cutter head 6-winged for continuous cutter - ultra-fine shredder Inotec I225 mm Catalogue Number: 30026958 , I4903560 I2250039048 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
Manufacturer: INOTEC Type: 175 for engines 75 D , 90 D Lug ring for Mikrocutter INOTEC 175 Article number : 30026149 , 30026172 , 175-00020123 V500661-1 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
Offer 23293 Specifications: - Printing capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - Infinitely adjustable stroke 0 to 28 mm - Stroke rate 26 to 36 1/min - Projection 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - Weight approx. 1300 kg - With: - Foot switch - Grain detection device, - Support table with foldable stops W 1100 x D 850mm - Sliding paths of the stops from the center of the punch - Width between Li and Re approx. 470 mm x D 510 mm
Automatic Groove and Grip Hole Eyelet Machine Hang Type 115-20 incl. Conveyor Belt and Ceiling Magazine Built in 1988 OKU-Automatic eyelet sorter, Conveyor belt Length 2,500, width 500 mm, Folding unit HANG, Benefit Investors Machine is in good condition
Key data: 55 t
Specifications Model No.: PM-55T Serial No.: 94713 Punching pressure max: 55 tons Punching capacity max.: Ø 22 x 18 mm Diameter x thickness: Ø 50 x 8 mm Engine power (kW): 3.7 Working height: 1050 mm Projection: 310 mm Table size (LxW): 700 x 500 mm Weight: 1620 kg Year of manufacture: 9/1999 Country of origin:Taiwan
Offer 23481 Specifications: - Printing capacity 30 t - max. sheet thickness 6 mm - Max. punching diameter 105 mm - Stroke 42 mm - Projection 700 mm - Maximum stroke rate 200 H/min - Table dimensions W 1500 x D 1100 mm - Table height 1000 mm - Drive 400 V / 4 kW - Space requirement approx. W 1600 x H 2000 x D 2200 mm - Weight approx. 3400 kg - With: - Bulletin table with adjustable stops - Quick-change punch device - Foot switches; - Emergency stop button - Various punches + dies in separate workbench
throat: 750 mm punch diameter: max. 75 mm max. sheet metal thickness: 4 mm weight of the machine ca.: 250 kg dimensions of machine L x W x H: 1,41 x 0,75 x 1,47 m max. punch cap. in steel ø 75 in 2,0 mm, in aluminium ø 75 in 3,2 mm resp. ø 55 in 4,0 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units ...
In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units ...
In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units ...
Punch power: 400 kN table surface area: ca. 1250 x 700 mm throat: 500 mm hole punching press: capacity (dia. x thick.): 100 x 3 mm hole punching press: capacity (dia. x thick.): 75 x 4 mm hole punching press: capacity (dia. x thick.): 30 x 10 mm x-travel: 700 mm y-travel: 470 mm total power requirement: 4 kVA weight of the machine ca.: 2 t dimensions of machine L x W x H: 1,50 x 1,72 x 2,00 m Accessories: tool cabinet with various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Stroke release via foot switch Range of tools is included in the price
Max. punching force: 500 kN Projection: 610 mm Includes an assortment of stamps and dies Weight: 1700 kg
Hole Saw Assortment EXACT Eventus Bi-Metal Hole Saws General Assortment 2 in Plastic Case Item No. 06085 Ø 20, 25, 30, 35, 40, 45, 50, 68, 75, 83 mm 4-6 teeth per inch Dimensions: 280 x 235 x 85 mm
Offer 25086 Specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Profile steel shears - L- and T-irons at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notches - With square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 100 t - Projection 510 mm - Stroke approx. 10 to 50 mm - Perforates in steel up to Ø 31 in 25 mm - E. contact stop - div. 10 pcs. punches + dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg
Manufacturer: Rapid, Type: Astglochbohrmaschine, Number of drilling spindles: 3 Spindeln Schnellkwechsel, Aperture/throat mm: 600, Units - total: 1, Main engine kW: 0,75, Drill feed - pneumatically: hand, Milling spindles vertical: 80 mm,
Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/AMasch. No. 9566 Year of construction approx. 2000Punching force 80 ton. Projection 300 mmPunching up to 40 mm in 14 mm sheet metalFlat material shears 450 x 15 mmAngle steel shears 130 x 130 x 13 mm4 edge shears 45 x 45 mmRound material shears 45 mmRectangular clinker up to 12 mmMotor power 5.5 kWNeching connection 400 volts, 50 Hz stop with el. Stroke release 500 mm - work table with stop at the hole device 550 x 380
Machine for punching and sharpening belts at the same time
punching pressure: 16 t plate thickness: 8 mm plate length max.: 1250 mm sheet width - max.: 1000 mm engine output: 13 kW control: Cadman CNC voltage: 400 V weight of the machine ca.: 8,3 t dimensions of the machine ca.: 3600 x 2300 x 2000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punching force: 300 kN For example, punches a 20 mm hole in 12 mm steel Stroke release via foot switch Range of tools is included in the price
Dimensions (L/W/H): 2700x2500x1760 mm Weight: 1500 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3900x2500x1760 mm Weight: 2000 kg Total power requirement: 6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 5000x2250x1650 mm Weight: 2600 kg Total power requirement: 11,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3900x2500x1760 mm Weight: 1800 kg Total power requirement: 5,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3900x2500x1760 mm Weight: 2000 kg Total power requirement: 9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3900x2500x1760 mm Weight: 1800 kg Total power requirement: 6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2700x2500x1760 mm Weight: 1500 kg Total power requirement: 5,9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3900x2500x1760 mm Weight: 2000 kg Total power requirement: 11,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3900x2500x1760 mm Weight: 1800 kg Total power requirement: 6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25437 Technical data: - Pressure capacity 500 KN - Stroke infinitely adjustable 10 - 32 mm - Stroke rate 22 - 27 1/min - Projection 510 mm - Installation height 350 mm - Drive 400 V / 4 kW - Holes e.g. up to 27 mm Ø in steel 14 mm - With special punching saddle, e.g. up to 39 mm Ø in steel 9.5 mm - e.g. up to 90 mm Ø in steel 4 mm - Space requirement approx. W 700 x H 1700 x D 1200 mm - Weight approx. 1150 kg - with: - Hydr. Low-Pressure Grain Locator - Long punch holder for punching in sectional steel - Roller conveyor with plier feed control PEHU 101 - Roller conveyor approx. 6000 mm - Footswitch - Emergency stop button
Punching force: 1000 kN Projection: 760 mm For example, punch a 40 mm hole in 22 mm steel Stroke release via foot switch Quick-change device Range of tools is included in the price 3000 kg
Punching force: 560 kN For example, punches a 30 mm hole in 15 mm steel Stroke release via foot switch Range of tools is included in the price
Mechanical hole punch with a punching force of 1000 kN. Tool holder for punches up to 90 mm can be mounted on request. A large assortment of stamps and dies is included in the scope of delivery.
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 1250mm -Length: 1595mm - Height: 47mm - Holes: M16 grid 50 x 50 mm -Drilling: 22 mm grid 450 x 400 mm -Plate: without straight edge -Number: 1 piece available -Weight: 700kg
Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg
Punching force: 300 kN For example, punches a 20 mm hole in 12 mm steel Stroke release via foot switch Support table Range of tools is included in the price
Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Large WBL support table with stop cam Stroke release via foot switch Range of tools is included in the price
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Handover: in its current condition as inspected -Condition: see pictures -Clamping angle: for workpiece clamping -Table surface: 730x610 mm, height 1595 mm -Wall thickness: 35/42 mm -Oblong hole: 25x150/25x105 mm -Dimensions: see photos -Number: 4x mounting brackets available Price: per piece -Dimensions: 610/730/H1595 mm/piece -Weight: 658 kg/piece
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 1085x885 mm, height 2185 mm -Wall thickness: 70 mm -Threaded holes: M20 -Dimensions: see photos -Number: 2x mounting brackets available -Price: per piece -Dimensions: 885/1085/H2185 mm/piece -Weight: 2280 kg/piece
gebr. Knothole drilling machine RAPID Type: AM Built in 1987 Motor power: 0.45 / 0.6 kW 2 speeds. 1,400 + 2,800 rpm Rated current: 1.4 A / 1.85 A (380V / 16A plug) Machine stand with drilling table and integrated tool compartment Table size: 78 x 49 cm 4-spindles Lifting device when changing drill bits Unit adjustable in height (adjustment range: 100 mm) incl. swivel device Ferry incl. various Gebr. Drills Machine dimensions (approx. dimensions): 49 x 110 x 178 cm (WxDxH) The machine comes from a school training center. Very good original condition! Manufacturer information
Knothole drilling machine Bäuerle Three-spindle drilling machine Type AL With 3 drilling jacks Drill bits can be individually Or be connected together by foot lever Stroke 80 mm Column projection 560 mm Two-jaw chuck clamping range 0-16 mm Motor power 0.7 kW Weight with pallet 450 kg Dimensions 880 mm x 750 mm x H 1750 mm Loading dimensions 1200 mm x 800 mm x H 1900 mm
pressure: 100 t punching cross-cut in cmm: 40.0 in 22.0 mm ST stroke: 120 mm column arm: 760 mm total power requirement: 8.5 kW weight of the machine ca.: ca. 3.800 kg dimensions of the machine ca.: ca. 2500 x 1700 x 2000 mm Original price, including stop system: approx. 45.000 euros Special price available upon request Features: - Robust / heavy-duty hydraulic hole punch - Punch stroke continuously adjustable - NC stop system MUBEA MATIC 82 Travel range in X and Y axes With FAGOR control unit Includes large support table Separate control cabinet - Various (custom) punching tools (see Figure 9) - Front safety guard, including sheet metal scraper - 1 freely movable foot switch - Operating instructions for machine and stop system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 70.0 t punching cross-cut in cmm: 27 in 20 mm punching cross-cut in cmm: 32 in 14 mm work height max.: 1060 mm column arm: 500 mm weight of the machine ca.: 1500 kg. total power requirement: 7.0 kW range L-W-H: 1550 x 1200 x 1950 mm good / well-maintained condition () New price approx. 21.000 euros Special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment - die base - 1x freely movable foot switch - operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
100 € 
