deep hole drill used for sale

Column drill PK 203 Russian, pendulum stroke 160 mm, 400 V, standing on pallet, oxidized

Angle drill PROTOOL DRP 16 ET FF, accessories, case

Diamond drilling machine PROTOOL DRP 16 E, S/N 601511

Drill motor STEINBERG 100 - 2,500 min-1, stand height approx. 40 cm

Complete with 5x various drills, 4x in case +1x loose Auction-ID: A1-45866-29

Complete with battery angle drill Makita type DDA351 complete with 2 different batteries and battery charger, power cable defective Auction-ID: A1-45866-47

Excluding clamps and tools, including cooling system Auction-ID: A1-45793-20

Vermeer D9x13III horizontal drilling rig (HDD) – 687 h – built in 2015 – top condition incl. extensive accessories For sale is a very well-maintained Vermeer D9x13III horizontal directional drilling rig with only 687 operating hours. The machine is ideal for trenchless pipeline construction (HDD), especially in the area of fiber optics, power and water lines. Technical data: Manufacturer: Vermeer Corporation Model: D9x13III Year of construction: 2015 Operating hours: 687 h Weight: approx. 2,810 kg Engine power: 33 kW PIN: 1VR1120H8F1000415 Condition: Top condition, very low mileage Ready to use and complete Normal, slight signs of wear present (see pictures) Equipment: Rubber track chassis Joystick control / control panel Hydraulic drilling system Built-in pole mount Accessory package (extensive): Mixing plant Extended drill pipe ...

Repair required Auction-ID: A1-45793-119

Auction-ID: A1-45793-100

Power 550 W Auction-ID: A1-45866-77

Core drilling machine / diamond drill Brand: Daewoo Type: DADK-D230BE Peak power: 4580 watts Speed: 100-530 RPM (infinitely adjustable) Max. Drilling Diameter: 230 mm Max. Drilling Depth: 550 mm Drill connection: 1/2 inch internal, 5/4 inch external Equipped with: digital display Equipped with: connection for water cooling Equipped with: 30 milliamp residual current device (PRCD) Tripod: Adjustable aluminum tripod Condition: unused, in the original packaging Attention: diamond drill bit not included Auction-ID: A3-43515-499

ID3770 Klemm KR806-3F year/Baujahr 2015 approx. 4.870 hours/hours 17.8 t Double-head drilling rig; the drive for the internal linkage/hydraulic hammer is a KD 1011 Double-head drilling rig, drive for the inner rod / hydraulic hammer is a KD 1011

Paper drill Dürselen Corta PB 04 N; cleaned and tested; 4 drill heads; Drilling lubrication and cooling; Speed regulation; Speed table stroke adjustable; max. Stack height 50mm; Insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; Endless drill belt; Optionally with Filofax 7-fold drill head. Paper driller Dürselen Corta PB 04 N; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind the driller 42mm; slide table; distance between the holes 31,7-293mm; endless drill band.

Code: 0365 Brand: LTF Model: SB 25 - CE Standard Pillar drill for wood, metals and various materials – CE Standard Technical specifications: Three-phase motor, 2,5 Kw Safety screen Drilling capacity up to 25 mm Height adjustable work table Table dimensions mm 350 x 350 Spindle taper 3 cm N° 9 speeds N° Spindle speed 230 ÷ 1910 rpm Column diameter 92 mm Table/spindle distance 720 mm Base/spindle distance 1250 mm Column/spindle distance 225 mm Overall dimensions mm 400 x 750 x 1800 h Weight kg 180

For screwing steel or aluminium profile sheets. 5 boxes of 500 pieces. Auction-ID: A1-45977-233

For screwing steel or aluminium profiled sheets. 1 carton of 250 pieces. Auction-ID: A1-45977-231

Self-drilling screws E-X BR HT 16 5.5 x 150 INOX, colour RAL 9010, 1 box, 200 pieces. Auction-ID: A1-45977-253

For screwing steel or aluminium profiled sheets. 1 box. 250 pieces. Auction-ID: A1-45977-240

For screwing steel or aluminium profile sheets. 5 boxes. 500 pieces. Auction-ID: A1-45977-245

For screwing steel or aluminium profiled sheets. 3 boxes (2x250 pcs. and 1x 100pcs.) 600 pieces. Auction-ID: A1-45977-249

Self-drilling screws E-X BR HT 16 5.5 x 150 INOX, colour RAL 9010, 1 box, 200 pieces. Auction-ID: A1-45977-252

For screwing steel or aluminium profile sheets. 5 boxes, 500 pieces. Auction-ID: A1-45977-234

In a case, with spare battery and charger Auction-ID: A1-45977-263

For screwing steel or aluminium profiled sheets. 1 box. 250 pieces. Auction-ID: A1-45977-237

For screwing steel or aluminium profile sheets. 5 boxes. 500 pieces. Auction-ID: A1-45977-242

For screwing steel or aluminium profile sheets. 5 boxes. 500 pieces. Auction-ID: A1-45977-247

For screwing steel or aluminium profile sheets. 5 boxes. 500 pieces. Auction-ID: A1-45977-241

Self-drilling screws E-X BR HT 16 5.5 x 150 INOX, colour RAL 9010, 1 box, 200 pieces. Auction-ID: A1-45977-251

Self-drilling screws E-X BR HT 16 5.5 x 150 INOX, colour RAL 9010, 1 box, 200 pieces. Auction-ID: A1-45977-255

For screwing steel or aluminium profile sheets. 5 boxes. 500 pieces. Auction-ID: A1-45977-246

For screwing steel or aluminium profiled sheets. 1 box. 250 pieces. Auction-ID: A1-45977-239

For screwing steel or aluminium profile sheets. 5 boxes. 500 pieces. Auction-ID: A1-45977-244

For screwing steel or aluminium profile sheets. 5 boxes. 500 pieces. Auction-ID: A1-45977-243

6 pieces, 5x as good as new, 1x sanded. Diameter 33.5 mm, 34.5 mm, 36 mm, 36.5 mm, 37.5 mm, 40 mm Auction-ID: A1-45977-200

For screwing steel or aluminium profiled sheets. 1 box. 250 pieces. Auction-ID: A1-45977-238

For screwing steel or aluminium profiled sheets. 3 boxes of 750 pieces. Auction-ID: A1-45977-232

Self-drilling screws E-X BR HT 16 5.5 x 150 INOX, colour RAL 9010, 1 box, 200 pieces. Auction-ID: A1-45977-250

Auction-ID: A1-45889-2895

Various sizes and designs, see pictures, approx. 18 pieces. Auction-ID: A1-45977-201

Self-drilling screws E-X BR HT 16 5.5 x 150 INOX, colour RAL 9010, 1 box, 200 pieces. Auction-ID: A1-45977-254

For screwing steel or aluminium profile sheets. 5 boxes of 500 pieces. Auction-ID: A1-45977-235

For screwing steel or aluminium profile sheets. 3 boxes of 100 pieces each. Auction-ID: A1-45977-230

For screwing steel or aluminium profile sheets. 5 boxes. 500 pieces. Auction-ID: A1-45977-236

For screwing steel or aluminium profile sheets. 5 boxes. 500 pieces. Auction-ID: A1-45977-248

Working areaSwing diameter over guide ways330 mmSwing diameter over transverse guideway260 mmTurning diameter200 mmTransverse stroke182,5 mmLongitudinal stroke455 mmClamping chuck diameter max.210 mmGeneralUniversal Turning Machines; Control: Siemens 840D SL Main drive 1Type of main driveAC Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmWork spindleSpindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore74 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmFloor space/WeightDimensions (L x W x H)4,47 x 2,01 x 1,75 mWeight approx.3800 KgPROGRESSlinePROGRESSline Digital Cycle-time Graphic Rest Time Product Counter12 stations servo-tool turret reception VDI 3012 stations tool turret (servo) reception VDI 30, make Sauter Note: option available only for machine in V1 versionConnection for oil mist ext ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightWeight approx.6500 KgDimensions (L x W x H)3,99 x 2,69 x 1,99 mTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgPlug-in board with 2x4 free in-/outputsInputs / outputs programmable via M-functions, consisting of: 8 inputs 4 outputs ...

Conrad drill rig, suitable for geothermal drilling., , - Machine manufactured in 2018, - Hours: 5,985, - Maintenance performed by the manufacturer, - Fully documented, - Powered by an IVECO N45 ENT, 4-cylinder , - Manipulator included, - Remotely controllable via remote control, - Pull up: 5000 daN, - Pull down: 3000 daN, - 4 drill head, bore 100mm, - Included with the machine: 32 drill pipes of 3 meters long (96 meters total), , Very neat and well-functioning machine, ready for immediate use!, , Contact us for an excellent offer, , = More information =, , General information, Year of manufacture: Aug 2018, Model year: 2018, Colour: Green, , Technical information, Power: 125 kW (170 HP), Number of cylinders: 4, Engine capacity: 4.500 cc, Type of fuel: Diesel, , Condition, Technical condition: very good, Visual appearance: very good, , Financial information, Price: On request, , Other inf ...

- 4 head drilling machine - with the existing accessories