133,684 used machines on RESALE, but how to find them? Machine Search
pressure: 100 t punching cross-cut in cmm: 40.0 in 22.0 mm ST stroke: 120 mm column arm: 760 mm total power requirement: 8.5 kW weight of the machine ca.: ca. 3.800 kg dimensions of the machine ca.: ca. 2500 x 1700 x 2000 mm Original price, including stop system: approx. 45.000 euros Special price available upon request Features: - Robust / heavy-duty hydraulic hole punch - Punch stroke continuously adjustable - NC stop system MUBEA MATIC 82 Travel range in X and Y axes With FAGOR control unit Includes large support table Separate control cabinet - Various (custom) punching tools (see Figure 9) - Front safety guard, including sheet metal scraper - 1 freely movable foot switch - Operating instructions for machine and stop system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
consisting of 14 pieces, some in original packaging Auction-ID: A7-49089-88
with three drawers and two doors Attention: the measuring device on the workbench is not included! Auction-ID: A7-49089-140
Stock 6 pcs Bellosta taps Edwar single-hole washbasin unit Auction-ID: A7-49228-6
pressure: 70.0 t punching cross-cut in cmm: 27 in 20 mm punching cross-cut in cmm: 32 in 14 mm work height max.: 1060 mm column arm: 500 mm weight of the machine ca.: 1500 kg. total power requirement: 7.0 kW range L-W-H: 1550 x 1200 x 1950 mm good / well-maintained condition () New price approx. 21.000 euros Special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment - die base - 1x freely movable foot switch - operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 1980 mm width: 670 mm height over floor: 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working pressure: 300 bar total power requirement: / kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Scheer DB 5 dowel hole drilling machine for the precise and rapid drilling of dowel holes (horizontal and vertical) in solid timber and board materials. The machine is ideal for mass production in furniture manufacturing as well as for precise joints in interior fit-out work. Includes a comprehensive range of dowel bits. Technical data: Drilling spindles: 21 Pitch: 32 mm Passage width: max. 1,000 mm Swivel mechanism: pneumatic Fax: 07427 920050, Mobile: 016096624745, Machine No. 208695, Jan 2011, Cost price 1,000 D-89440 Lutzingen, Tel. 09074 1371, Fax: 09074 5516, April 2015, purchase price 500 Condition: Gebraucht Location: Tauberbischofsheim, Germany
Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Technical data: Cylinders: 6 Hold-down units: 3 Pressing area: 260 x 145 cm Condition: Gebraucht Location: Tauberbischofsheim, Germany
pressure: 50 t throat: 610 mm total power requirement: 7,5 kW machine weight ab.: 1700 kg dimensions: 1500 x 650 x 1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 175 mm work height max.: 1055 mm stroke: 30 mm sheet thickness - max.: 8 mm total power requirement: 4 kW weight of the machine ca.: 1020 kg dimensions: 910 x 670 x 1930 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressing force: 100 t diameter: 40 mm throat: 760 mm total power requirement: 8,5 kW weight: 3.600 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 620 mm stroke: 0-100 mm hole diameter in sheet thickness: 40 in 20 mm no. of strokes: 49 Hub/min Control: total power requirement: 15 kW weight of the machine ca.: 3.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 26 t punching cross-cut in cmm: 80 x 2,5 stroke: - mm total power requirement: 1,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 x 3 x 2,5 m No. 1096: Revolver hole punch 26 to. EDEL, type SMO 26/660/12 built 1973 with throat depth 660 mm Working area: diam. 80 x 2.5 mm Drive power: 1.5 kW Accessories: 12-station tool magazine Various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30.0 t punching cross-cut in cmm: 30.0 in 9.0 mm stroke: ca. 35 Hub/min throat: 610 mm stroke - stepless adjustable: 0 - 28.0 mm oil volume: 35.0 l work height max.: 1010 mm total power requirement: 4.0 kW weight of the machine ca.: 1200 kg. Features: - Electro-hydraulic punch press with long reach - Material/sheet metal scraper - Very large material support table (!) with adjustable depth stops - Continuously variable stroke adjustment - Freely movable foot switch, including protective cover - Side storage shelf - Assortment of punches and dies - Original operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t punching cross-cut in cmm: Ø 31 in 25 mm stroke: 10 - 50 mm column arm: 510 mm work height max.: 1100 mm no. of strokes: 14 - 45 Hub/min punch diameter: max. Ø 90.0 mm oil volume: 103 l total power requirement: 7.5 kW weight of the machine ca.: 2400 kg. range L-W-H: 1750 x 1020 x 2050 mm maintained condition () New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual The data for this ad was created with ModulMWS ...
pressure: 30.0 t punching cross-cut in cmm: 30.0 in 9.0 mm stroke: ca. 35 Hub/min throat: 610 mm stroke - stepless adjustable: 0 - 28.0 mm oil volume: 35.0 l work height max.: 1010 mm total power requirement: 4.0 kW weight of the machine ca.: 1200 kg. range L-W-H: 1400 x 700 x 1600 mm good condition () with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel The data for this ad was created with ModulMWS - the softwar ...
pressure: 35.0 t plate thickness: max. 8.0 mm throat: 830 mm diameter of seal: max. 105 mm table:: 1500 x 1200 mm work height max.: 920 mm die stroke: ca. 90.0 mm strokes per minute: ca. 200 Pressure power: 220 bar oil volume: 80.0 l total power requirement: 4.0 kW weight of the machine ca.: 3200 kg range L-W-H: 1600 x 1800 x 1800 mm The IS 35 hydraulic punching machine has been specially optimized for processing sheet metal and extruded parts. It stands out for its flexibility and manufacturing precision. The machines in the IS series are equipped with 35 metric tons of punching force. Features: - Electro-hydraulic punch press with long reach - Robust C-frame construction Solid cast or welded frame (C-shape) Extremely high punching precision Compact design = small footprint Hydraulic overload protection - Separate control unit - Single and continuous stroke selectable - Infinitely a ...
and of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, which is characterized by a hardness and resistance to high temperatures significantly higher than HSS high speed steel. Auction-ID: A7-49495-61
9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-49495-266
Set of bi-metal hole saws for metal and wood. These hole saws are used to drill precise holes in: wood, wood-based materials, plastics, aluminum, brass, and steel alloys Auction-ID: A7-49495-284
Set of bi-metal hole saws for metal and wood. These hole saws are used to drill precise holes in: wood, wood-based materials, plastics, aluminum, brass, and steel alloys Auction-ID: A7-49495-84
Set of bi-metal hole saws for metal and wood. These hole saws are used to drill precise holes in: wood, wood-based materials, plastics, aluminum, brass, and steel alloys Auction-ID: A7-49495-184
9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-49495-166
Set of diamond hole saws in sizes from 6 to 12 mm. Equipped with M14 connection, suitable for angle grinders. Ideal for drilling holes in materials such as stoneware, ceramic tiles, clinker, roof tiles and natural stone. Auction-ID: A7-49495-226
Set of diamond hole saws in sizes from 6 to 12 mm. Equipped with M14 connection, suitable for angle grinders. Ideal for drilling holes in materials such as stoneware, ceramic tiles, clinker, roof tiles and natural stone. Auction-ID: A7-49495-26
and of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, which is characterized by a hardness and resistance to high temperatures significantly higher than HSS high speed steel. Auction-ID: A7-49495-161
Set of diamond hole saws in sizes from 6 to 12 mm. Equipped with M14 connection, suitable for angle grinders. Ideal for drilling holes in materials such as stoneware, ceramic tiles, clinker, roof tiles and natural stone. Auction-ID: A7-49495-126
9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-49495-66
and of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, which is characterized by a hardness and resistance to high temperatures significantly higher than HSS high speed steel. Auction-ID: A7-49495-261
Technical data Manufacturer: CASTEK HUBER Machine Type: Start Hole EDM Machine / EDM Drilling Machine (Source: Online Research) Type / Model: not clearly readable Configuration Vertical EDM head Movable cross table with handwheels Electronic EDM/Positioning Control Pump and flushing unit Work light Machine cabinet Remarks The article comes from a company liquidation and was actively used in production until the plant closed. Auction-ID: A7-49302-149
STETON Slotted Hole Drilling Machine, Type CM 104 Compact stationary machine with adjustable work table, workpiece clamp and two-speed motor. Instruction manual available Technical data Manufacturer: STETON Type: CM 104 Year of manufacture: 2005 Serial / Machine Number: 7500 747 Table size: approx. 580 × 280 mm Drilling table height: approx. 800 mm Drilling depth: approx. 150 mm Drilling length: approx. 225 mm Height adjustment: approx. 120 mm Swivel range: approx. 2 × 45° Drill speed: approx. 1,400 / 2,800 rpm Tool/drill holder: approx. Ø 0–20 mm Suction nozzle: approx. Ø 80 mm Engine power: approx. 2.2 kW / 3 hp Electrical connection: approx. 380 V / 3 Ph. / 50 Hz Current consumption: approx. 5 A Dimensions (L × W × H): approx. 800 × 600 × 1,000 mm Weight: approx. 240 kg User manual: available Auction-ID: A1-49712-5
weight max.: 1 t stroke: / mm clamping width: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Production number: 4201753783010 Operating voltage: 220/380 V Frequency: 50 Hz Nominal current: 10/7 A Punching force: 450 kN Table dimensions: 500 x 260 mm incl. matching accessories Reference: Baumstark - Lot 20 Auction-ID: A7-49882-71
Plate dimensions: 600 x 500 mm Measuring range of the height ripper: 600 mm Reference: Alesco - Lot 85 Auction-ID: A7-49882-52
HBM 16-piece hole saw set – 19-127mm diameter, suitable for wood, plaster and plaster (2x) Make perfect round holes in different materials with the HBM sixteen-piece hole saw set. With the complete set, you can easily make smooth holes up to 25 mm deep. About the HBM 16 Piece Hole Saw Set Do you want to make smooth, round holes in wood or other material? Then choose this sixteen-piece hole saw set from HBM. Choose the right hole saw and use a cordless or drill to create the perfect circular hole without unsightly serrated edges. This way you can easily make holes to place taps, slide hoses through or to place light switches. Hole saws are widely used by construction professionals and DIY enthusiasts alike. With this hole saw set from HBM, make round holes in wood, plaster and plaster among other things. You may also know hole saws under the name hole saws, drill crowns, hole drills or ...
The set comes in a sturdy lockable box with various compartments where everything fits perfectly. Complete set with hole saws, hole holder, mounting plate and Allen key. The hole saws are made of sturdy metal. Auction-ID: A1-40897-81
2.2 kW, equipped with emergency stop button, blade extraction, quick-release drill chuck 2-20 mm, 17 threaded clamping holes. A hand-operated ball-bearing drill reticle carriage with depth stop. Drill height adjustment numerically readable. Dowel / row drill device with 16-22-25-32 mm pitches, With left and right rotatable double adjustable stops with aluminum butt lugs, Clamping toggle can be positioned both left and right. With lighting. Auction-ID: A1-48994-21
Auction-ID: A1-50069-255
Auction-ID: A1-50069-256
max. workpiece dimensions: 840 x 460 x 350 mm max. workpiece weight: 150 kg Worktable dimensions: 600 x 300 mm X-axis travel: 350 mm,Y-axis travel: 250 mm Z-axis travel: 350 mm W-axis: 350 mm Rotation speed (C-axis): 300 rpm Reference: Schönichen - Lot 12 Auction-ID: A7-49882-409
Auction-ID: A1-50069-254
Auction-ID: A1-50069-253
Auction-ID: A1-50069-257
maximum number of results exceeded
please refine your search
250 € 
