deep hole boring used for sale

mainly the manufacturer GÜHRING and BOTEK in different designs and sizes incl. workbench Reference: Alesco - Lot 47 Auction-ID: A7-49882-25

core drilling diameter max.: 50 - 365 mm bore depth: 24500 mm swing diameter: 1600 mm full boring: 50 - 310 mm bed width: 1200 mm faceplate diameter: 1300 mm workpiece weight max.: 25 - 80 t diameter of main spindle in front bearing: 400 mm Height of centres: 800 mm turning speed range: 0 - 315 U/min main drive DC: 44 kW drill diameter: 500 mm feeds: 0,5 - 500 mm/min workpiece length - max.: 10.000 mm work piece power: 74 kW turning speed range - drilling: 120-600-2400 U/min hollow spindle diameter: 460 mm turning speed range: 30-600 U/min Control: total power requirement: ca. 200 kVA weight of the machine ca.: - t dimensions of the machine ca.: - m modernised in 2002 and 2011 operates using the BTA process - - 2 roller mandrels 100–650 mm - 2 roller stands 650–1200 mm - Coolant system Range of diameters and length of drilling on one side:. D 35 – 45 mm L = 4000 mm D 46 – 65 mm ...

core drilling diameter max.: 50 - 365 mm bore depth: 24500 mm swing diameter: 1600 mm full boring: 50 - 310 mm bed width: 1200 mm faceplate diameter: 1300 mm workpiece weight max.: 25 - 80 t diameter of main spindle in front bearing: 400 mm Height of centres: 800 mm turning speed range: 0 - 315 U/min main drive DC: 44 kW drill diameter: 500 mm feeds: 0,5 - 500 mm/min workpiece length - max.: 10.000 mm work piece power: 74 kW turning speed range - drilling: 120-600-2400 U/min hollow spindle diameter: 460 mm turning speed range: 30-600 U/min Control: total power requirement: ca. 200 kVA weight of the machine ca.: - t dimensions of the machine ca.: - m modernised in 2004 operates using the BTA process - - 2 roller mandrels 100–650 mm - 2 roller stands 650–1200 mm - Coolant system Range of diameters and length of drilling on one side:. D 35 – 45 mm L = 4000 mm D 46 – 65 mm L = 600 ...

Deep Hole Drilling Machine incl. 3 wood drill bits Diameter 34mm Recording MK2 Support table 2100mm Drill lengths 1100mm Workpiece clamping cylinders see pictures Auction-ID: A7-49782-609

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.

Ayen Knothole Drilling Machine ED 08-4, Machine No.:270 316, 0,6kW, 380volt, 1420 rpm,

In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units  ...

In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units  ...

In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units  ...

Manufacturer: Rapid, Type: Astglochbohrmaschine, Number of drilling spindles: 3 Spindeln Schnellkwechsel, Aperture/throat mm: 600, Units - total: 1, Main engine kW: 0,75, Drill feed - pneumatically: hand, Milling spindles vertical: 80 mm,

gebr. Knothole drilling machine RAPID Type: AM Built in 1987 Motor power: 0.45 / 0.6 kW 2 speeds. 1,400 + 2,800 rpm Rated current: 1.4 A / 1.85 A (380V / 16A plug) Machine stand with drilling table and integrated tool compartment Table size: 78 x 49 cm 4-spindles Lifting device when changing drill bits Unit adjustable in height (adjustment range: 100 mm) incl. swivel device Ferry incl. various Gebr. Drills Machine dimensions (approx. dimensions): 49 x 110 x 178 cm (WxDxH) The machine comes from a school training center. Very good original condition! Manufacturer information

Pitch: 32 mm Motor output: 1,8 kW Clamping height max.: mm Overall size: mm Weight: 240 kg Number of boring spindles: 21 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Knothole drilling machine Bäuerle Three-spindle drilling machine Type AL With 3 drilling jacks Drill bits can be individually Or be connected together by foot lever Stroke 80 mm Column projection 560 mm Two-jaw chuck clamping range 0-16 mm Motor power 0.7 kW Weight with pallet 450 kg Dimensions 880 mm x 750 mm x H 1750 mm Loading dimensions 1200 mm x 800 mm x H 1900 mm

Multivac R 530, rigid films + soft film, film width 420 mm, trigger 560 mm 2.3, MAP fumigation, long loading, jumbo roll holder for film, double film holder for top film, printing mark control, 3 x cross cutting for soft slide, 3 x hard foil stamping

ISO refrigerated container 20ft standard box, manufactured to ISO 1496-1 Type: 22R1 State - used and processed (on request new paintwork at an extra cost!) - Current PTI check - CSC approval - ready for immediate use Visit of our offered containers is possible at any time on site! Color Pure white RAL 9010 TECHNICAL DATA - Dimensions on the outside: (L x W x H) 6,058 x 2,438 x 2,591 mm - Dimensions inside: (L x W x H) 5,412 x 2,292 x 2,300 mm - Volume: 36.5 m3 - Weight: 2.88 t - Payload: 21.12 t - Temperature range: -25°C to +30°C - Refrigeration carrier: R134a - Power: 6-10 kW/h (indicative! Real values depend on several factors.) - Cooling unit: Carrier Streamline (2006 built), 380-460 V, 50-60 Hz, 5-pin plug/CEE 32A - Transportable and crane-capable - PTI check (= Pre Trip Inspection) function check - CSC safety approval SPECIAL USE / CONVERSION (on  ...

Immediately available from stock: Used, plug-in AHT Miami freezers, freezers or switchable freezers/freezers in different Sizes (185, 210, 250cm). Large quantities available! The refrigerated and freezer chests of the leading brand manufacturer AHT convince by quality, durability, optimal product presentation and low operating costs. No wonder AHT chests are THE fridge stake of most major supermarket chains and discounters. Our refrigeration and freezerunits are all equipped with interior lighting and panoramic glass sliding lids and can be assembled into sales-effective and space-saving cooling islands. We would be happy to advise you on your personal cooling island composition. The used refrigeration equipment is all checked for functionality, cleaned and reconditioned if required. This results in different price categories (see prices below). Depending on your wishes and your ...

Immediately available from stock: Used, plug-in AHT Miami freezers, freezers or switchable freezers/freezers in different Sizes (185, 210, 250cm). Large quantities available! The refrigerated and freezer chests of the leading brand manufacturer AHT convince by quality, durability, optimal product presentation and low operating costs. No wonder AHT chests are THE fridge stake of most major supermarket chains and discounters. Our refrigeration and freezerunits are all equipped with interior lighting and panoramic glass sliding lids and can be assembled into sales-effective and space-saving cooling islands. We would be happy to advise you on your personal cooling island composition. The used refrigeration equipment is all checked for functionality, cleaned and reconditioned if required. This results in different price categories (see prices below). Depending on your wishes and your ...

Immediately available from stock: Used, plug-in AHT Miami freezers, freezers or switchable freezers/freezers in different Sizes (185, 210, 250cm). Large quantities available! The refrigerated and freezer chests of the leading brand manufacturer AHT convince by quality, durability, optimal product presentation and low operating costs. No wonder AHT chests are THE fridge stake of most major supermarket chains and discounters. Our refrigeration and freezerunits are all equipped with interior lighting and panoramic glass sliding lids and can be assembled into sales-effective and space-saving cooling islands. We would be happy to advise you on your personal cooling island composition. The used refrigeration equipment is all checked for functionality, cleaned and reconditioned if required. This results in different price categories (see prices below). Depending on your wishes and your ...

Used, plug-in AHT Paris freezers, freezers or switchable freezers/freezers in different Sizes (185, 210, 250cm) available in large numbers immediately from stock. The refrigerated and freezer chests of the leading brand manufacturer AHT convince by quality, durability, optimal product presentation and low operating costs. No wonder AHT chests are THE fridge stake of most major supermarket chains and discounters. Our refrigeration and freezerunits are all equipped with interior lighting and panoramic glass sliding lids and can be assembled into sales-effective and space-saving cooling islands. We would be happy to advise you on your personal cooling island composition. The used refrigeration equipment is all checked for functionality, cleaned and reconditioned if required. This results in different price categories (see prices below). Depending on your wishes and your individual  ...

Used, plug-in AHT Paris freezers, freezers or switchable freezers/freezers in different Sizes (185, 210, 250cm) available in large numbers immediately from stock. The refrigerated and freezer chests of the leading brand manufacturer AHT convince by quality, durability, optimal product presentation and low operating costs. No wonder AHT chests are THE fridge stake of most major supermarket chains and discounters. Our refrigeration and freezerunits are all equipped with interior lighting and panoramic glass sliding lids and can be assembled into sales-effective and space-saving cooling islands. We would be happy to advise you on your personal cooling island composition. The used refrigeration equipment is all checked for functionality, cleaned and reconditioned if required. This results in different price categories (see prices below). Depending on your wishes and your individual  ...

Used, plug-in AHT Paris freezers, freezers or switchable freezers/freezers in different Sizes (185, 210, 250cm) available in large numbers immediately from stock. The refrigerated and freezer chests of the leading brand manufacturer AHT convince by quality, durability, optimal product presentation and low operating costs. No wonder AHT chests are THE fridge stake of most major supermarket chains and discounters. Our refrigeration and freezerunits are all equipped with interior lighting and panoramic glass sliding lids and can be assembled into sales-effective and space-saving cooling islands. We would be happy to advise you on your personal cooling island composition. The used refrigeration equipment is all checked for functionality, cleaned and reconditioned if required. This results in different price categories (see prices below). Depending on your wishes and your individual  ...

Industrial freezer down to -40°C TTS 40-944U Fryka Refrigeration Freezer down to -40°C Tyxp TTS 40-944U Manufacturer Fryka Kältetechnik GmbH LED temperature display Electronic control ST100 (membrane keyboard) Alarm equipment Standby switch Current connection 400Volt, 16A Former original price 20.000.-EUR Quote from manufacturer description: "The housing is made entirely of stainless steel sheet. The insulated outer lid is lockable on the handle. In addition to the outer lid with double seal, the interior is closed with PE insertion lids. The lid is fixed to the base housing with folding hinges and is dampened by gas springs when opening and closing. This allows an opening angle of 90°. The insulation between the interior and the housing jacket is made of two-component insulating foam. The evaporator tubes of the chiller are wound around the interior. The inner she ...

The depth bridge is suitable for a column depth of 1,050 mm and a maximum truss width of 40 mm. Included in delivery are: 01x deep bridge, used Material color: orange Total length: approx. 1,058 mm f. Stand depth: approx. 1,050 mm Clear span: approx. 960 mm Technical data for the deep bridge: Shelving system: Nedcon Profile abbreviation: 60 x 40 mm Truss pad: approx. 43 mm Material thickness profile: approx. 1.50 mm Material thickness: approx. 4.00 mm Unit weight: approx. 2.50 kg General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

High-performance deep-drawing packaging machine from MULTIVAC - ALSO SUITABLE FOR HARD FOIL - Film width 420mm - With many extras - Double format (thus 2x speed)

Type: MUTIVAC R 530 Film type: flexible Bottom film width: 625 mm Top film width: 610 mm Cut-off length: 657 mm Pack sizes: 2.1 (2 pack.: 640 x 267 mm) Max.depth: 200 mm Vacuum pump: 250 m3/h Length: 8500 mm

Format trolley for storing format parts for deep drawing machines made entirely of stainless steel with three drawers, a drawer and a storage surface, mobile with brake rollers Extracts resilient with 30 kg and with food-approved plastic, as well as the tray bevelled construction prevents the car from tilting. Format trolley is used for the proper storage of formats with all accessories. All parts are located in one place and can be driven to the machine when changing formats. Dimensions: 1250x900/600x1100 mm (WxDxH)

SOUND TOP ENERGY 250 – COSTAN Built-in refrigerated wall suitable for placement above freezers. Increase in sales space while maintaining the same footprint on the ground. Used and tested. NOT REFURBISHED Latest generation products, LED lighting and years of production 2016 – 2017-2018 Dimensions: (additional dimensions can be found in the details of the images) Length: 250cm Depth: 75cm Height: 230cm Technical details: Equipped with Automatic Defrost Inverter. R290 Propane Gas LED Lighting Plug-ins Operating temperature: BT -18C° / -25C° | TN +2C° / +6C° Net capacity: 780Lt Each product is tested to guarantee the perfect operation. NOT REFURBISHED.

Used.

Qty.1 Second-hand deep drawing press Mfc.: LVD Co. Type: EMF-TWI- 200SP Built: 1982 Stopped production in 2002 Tested in 2012 In operation condition! Max. pressure: 200 T (2000 kN) Max. oil pressure: 300 bar Max. hydr. stroke: 2300 mm Max. distance table – ram: 4500 mm Motor power: 250 HP (187 kW) Table & ram dim.: dia. 300 mm Closing speed: 160/80 mm/sec. Working speed: 3507175 mm/sec. Cushion Max. capacity: 2 x 1000 kN Max. oil pressure: 300 bar Max. hydr. stroke: 2000 mm Table dim.: 1800 x 1800 mm Motor power: 75 HP (56 kW) Plate holder Plate holder dim.: 250 mm Plate holder stroke: 1000 mm Motor power: 25 HP (19 kW), 3 x220 V Weight: 75 Ton Pumps Main pump: 3 x A7V355LV 1RPFHO Pilot pump: Vickers V210-5-1A-10-5214 Tank Volume: 3350 L

BECKER & VAN HÜLLEN deep drawing press was built in Germany by Becker & van Hüllen Niederrheinische Maschinenfabrik GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. In 2022, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The BECKER & VAN HUELLEN 650T is used in industries specialising in stamping, production of automotive parts, tanks and other parts that require high press force and multi-stage forming. Its main purpose is deep drawing. The machining process is performed with a high press force of up to 650 tonnes. The two-stage design allows successive forming stages to be carried out in a single work cycle, thus enabling the manufacture of parts with even the most complex shapes. The m ...

Axial deep groove ball bearings, axial deep groove ball bearings, thrust ball bearings, thrust bearings -Manufacturer: FAG, axial deep groove ball bearing 51164PM, OVP -Outer diameter: 400 mm -Dimension: Ø 400 x 65 mm -Weight: 18.4 kg

Cylindrical roller bearings, spherical roller bearings, deep groove ball bearings -FAG: 6218MA.C3 -Outer diameter: 160 mm -Inside diameter: 90 mm -Width: 30 mm -Price: per piece -Number: 2 pieces -Weight: 2.7 kg

Ball bearings, deep groove ball bearings -Number: 80x stock available -Price: per piece -Interior diameter: Ø 10 mm -Outer diameter: Ø 28 mm -Width: 8 mm -Weight: 0.2 kg/piece

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1997; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 492mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.2; Length: 7200 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1700 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packaging can be soft or hard. Machines intended for packing food and non-food products. Producer: VERIPACK; Model: TX 12/121; Year of production 1991; Working with soft foil; Bottom foil: +/- 415 mm (approx); Upper foil: +/- 405 mm (approx); Molding length: 395mm; Forming width: 368mm; Molding depth: 90mm; Formats: 1.2; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg - the machine is dismantled; - technical condition - good; - yes, there is original documentation, CE certificate, CE nameplate and a general list of inputs and outputs.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R5200; Year of production 1989; Working with soft or hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 182mm; Forming width: 370 mm; Molding depth: 70mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 1800 mm; Weight: 1400 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: CFS; Model: TIROMAT Compact 420; Year of production 2001; Working with soft foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 410 mm (approx); Molding length: 430mm; Forming width: 380mm; Molding depth: 130 mm; Formats: 2.2; Length: 6700 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R230; Year of production 2002; Machine designed for packing sandwiches; Working only with hard foil; Bottom foil: +/- 320 mm (approx); Upper foil: +/- 315 mm (approx); Molding length: 165mm; Forming width: 80mm; Molding depth: 80mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 2100 mm; Weight: 1500 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R270 CD; Year of production 2004; SKIN packing machine; Working only with hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 244mm; Forming width: 364 mm; Molding depth: 80mm; Formats: 2.1; Length: 6800 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R530; Year of production 1996; Working only with hard foil; Bottom foil: +/- 465 mm (approx); Upper foil: +/- 455 mm (approx); Molding length: 192mm; Forming width: 404mm; Molding depth: 40mm; Formats: 4.2; Length: 7000 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: VERIPACK; Model: FREEDOM / F140; Year of production 2004; Working with soft or hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 410 mm (approx); Molding length: 256mm; Forming width: 386mm; Molding depth: 120mm; Formats: 2.2, 3.2; Length: 7500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1996; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 266mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.1; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg.

Capacity, ton 1250 Stroke, mm 500 Maximum drawing depth,mm 200 Min number of no-load stroke: 14 /per min Slider adjustment, mm 315 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1250 Table size, mm 1600 x 1800 Slider size, mm 1530 x 1800 Aperture in a table, mm 1100 x 1100 Distance between columns, mm 1600 Cushion travel, mm 200 Cushion capacity, ton 200 Maximum push force ton 31.5 main motor power, kW 125 Press overall dimensions: 5850x3100x8950 mm Press weight, kg 195000

MECA Thermoformer Type: 650 Number: T02126 Year of construction: 07/04 Distance between chains: 500 mm Dye's: (4x) 210 mm x 170 mm, total dimensions: 7300 mm x 1300 mm x 2470 mm Including large amount of parts.

used thermoforming machine TYPE Powerpak NT 420 year 2011 for sale Machine was taken out of production - ran to the last. Foil width 420 VZ 590 mm Price on request

Tiefofen zum Homogenisieren von Walzbarren Wärmezubehandelnde Barren werden auf einer Stirnseite stehend mittels Krananlage und Zangeneinrichtung in den Ofen eingesetzt. Die Erwärmung der Barren wird bei mehrreihigem Einsatz durch Hochkonvektion mit entsprechend angeordneten Düsen und Düsenkanälen gleichmäßig erwärmt. Nach Ablauf der Homogenisierungszeit wird die Barrentemperatur auf Walztemperatur abgesenkt und die Barren stehen für die einzelne Abnahme im Walz-Takt zur Verfügung. Die Öfen können direkt und indirekt Gas oder elektrisch beheizt ausgeführt werden. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Ofenanlagen zum Glühen von Aluminium Die Bandbunde werden mit Ihrer Achse horizontal in den Ofen eingelegt. Die Aufnahme erfolgt bei Dünnband auf den Spulen und dickeren Bändern in Prismen ode ...

Auction-ID: A7-49603-46

Multivac R 230, year of manufacture 2001, film width 355 mm, draw-off length 210 mm, free loading section of 1,6 m, MC96II control with LCD monitor, 10 mm side trim, two cross-cut guillotines, height-adjustable discharge conveyor, central chain lubrication, new servo inverter for chain feed, Vario tool with interchangeable formats. Format: 1.1 . 335 mm x 210 mm 2.1 - 167.5 mm x 210 mm 2.2 - 167.5 mm x 105 mm 3.1 - 111.66 mm x 210 mm Total length of the machine 5,15 m Operational and wear parts replaced.

DIXIE UNION, DIXIEVAC2000 Thermoformer, 400 Volt, 50 HZ, in working condition

SOUND TOP ENERGY 250 – COSTAN + MIAMI 250 AHT ADVS Built-in refrigerated wall suitable for placement above freezers. Increase in sales space while maintaining the same footprint on the ground. Used and REFURBISHED product. Latest generation products, LED lighting and years of production from 2016. Dimensions: Length: 250cm Depth: 110cm ( included the freezer Miami 250 ) Height: 230cm Technical details: Equipped with Automatic Defrost Inverter. R290 Propane Gas. LED Lighting. Plug-in with Shuko plug. Operating temperature: BT -18C° / -25C° | TN +2C° / +6C° Net capacity: 1450 Lt. ( total capacity Sound Top 250 + Miami 250 ) Power input: 220 Volt. All the items are sold refurbished, tested and ready for use.