135,190 used machines on RESALE, but how to find them? Machine Search
spindle diameter: 80 mm x-travel: 1100 mm y-travel: 750 mm z-travel: 1350 mm surface area: 1000 x 1000 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5x3x3 m • 3-axis-D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bore diameter: , mm Number of heads horizontal: , St. Number of heads vertical: , St. SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung ---------------------------------------------------------------- komplett wie folgt : - Fahrbare Ausführung - Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert. - 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung - Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet - pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen für nur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm. Dübellänge : min. 25 mm. – max. 60 mm. Tiefeinsetzen = 30 mm. Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung für elektronische Dosierung in Verbindung ist, gespritzt . - Flexibler Arm mit ...
Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mm throat: 240 mm bore stroke: 110 mm turning speeds: 125 - 2850 U/min : 310 x 320 mm distance drilling head - clamping area: max. 650 mm total power requirement: 0,75 / 400 kW / Volt weight of the machine ca.: 0,175 t dimensions: 0,95x0,8x1,75 inkl. Tisch m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 16 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK2 spindle turning speed range: 50 - 2250 U/min : 320 mm : 145 mm table surface area: 500 x 140 mm connected load frequency: 230 V total power requirement: 0,5 kW weight of the machine ca.: 90 Kg dimensions of the machine ca.: 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 55 mm : M 30 : M 36 : MK 4 spindle turning speed - stepless: 70-1.200 U/min spindle stroke: 140 mm throat: 300 mm column diameter: 145 mm : 615x430 mm distance spindle /table: min./max. 150/735 mm : 2 x 14 x 224 mm feed: 0,1 + 0,3 mm/U Machine height: 1850 mm weight: 380 kg drive motor: 1,8/2,9 kW Standard equipment: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse Item 20.1 Thread cutting device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Thread cutting performance dependent on spindle speed) ! NEW FOR YOU AS A SERVICE ! Machine leasing up to 60 months without down payment, without residual value, personal advice and individual leasing rate calcu ...
Alzmetall AB 35 HST / Box Column Drill & Walter Gras Arbo3 Interchangeable Head -Drilling capacity / steel approx. 40mm -Drilling capacity / casting approx. 45mm -Threading max. M25 -Spindle holder MK 4 -Spindle stroke 180mm -Speed range (INFINITELY VARIABLE) 65 - 1750 rpm -Switchable speed range 130-480 / 480-1750 rpm -Automatic feeds 0.1-0.2-0.3mm/rev -Drilling depth adjustable via depth scale -Speed display -Right/counterclockwise rotation -Swivel drill head with tools -Height-adjustable work table by hand crank -Coolant device -Emergency / Off -Work light Dimensions: LxWxH 1x0.8x2.1 meters / Weight approx. 1200KG
bore capacity in steel (diameter): 40 mm throat: 293 mm bore stroke: 120 mm spindle taper MT: 3 column diameter: 115 mm table surface area: 514 x 360 mm spindle turning speed - stepless: 160 - 2250 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 0,285 t dimensions of the machine ca.: m Condition: new / unused: The machine can be viewed under current.: 37981 400 V, 50 Hz, colour: light grey RAL 7035 continuous speed control, digital speed indication, push button for emergency switch off, turning switch for clockwise/counterclockwise rotation, motor protection switch, IP 54, connecting plug, finish: structure varnish, new spindle bearing, new step pulleys, belts aso. operation manual, wiring diagram. Machine has been checked in our workshop, including electr. testing report. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 23 / 28 mm throat: 260 mm bore stroke: 120 mm tool taper: MK 3 table-size: 500 x 350 mm column diameter: 100 mm total power requirement: 1,3 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 800 x 600 x 1750 mm Defective feed! Right-left rotation stepless speed adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MAW BEV electro-pneumatic pot-head drilling machine for drilling pot-head screws or fittings Technical data: Work surface: 300 x 37 cm Motor: 1.6 kW Weight: 180 kg Condition: Gebraucht Location: Tauberbischofsheim, Germany
Specifications: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/U - Drilling spindle speeds in gear stages 95 - 2000 rpm - Right - Left - Drilling spindle stroke 160 mm - Projection 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right - distance table – drilling spindle 500 mm - distance machined base plate – drilling spindle 1050 mm - Column diameter 160 mm - Lighting - Coolant device - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg
1 x used double-sided Rotoles S600 with 2 grinding units and 1x brush Working width 600mmm Speed 60m/min Calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing. Rotoles S calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing.
bore capacity in steel (diameter): 50 mm arm length: 1500 mm workpiece height max.: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1610008 Type of machine Radial drill Make MAS Type VO 50 Admision in drilling spindle MT 5 Max. drill capacity 50 mm Base dimensions 1820 x 986 mm Speeds (Rpm) 28 - 2500 Feeds (mm/R) 0,5 - 2 Lenght (mm) 3250 Width (mm) 1120 Height (mm) 3396 Weight 4550 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rapid radial / Rapid radial / Snel radial DANUBE DR 13
Hardware drilling and recessing machine, with multi-spindle head Table mounted Motor 1,1 kW Fence left and right, 1,5 m. long
Тип: Z4A Число осей/ шпинделей Доступны различные варианты головок 4x3 Расстояние между крайними шпинделями 2300 mm Регулируемая скорость сверления Высота стола от пола 840 mm Размеры стола 600x2350 mm Число прижимов 8 Мощность двигателя 6 kW(4x1,5) 400 V Скорость двигателя 2840 r.p.m Необходимое давление воздуха 6-8 bar Вес 425 kg Размеры для транспортировки 2450x960x1550 mm
Travel X/Y/Z/W: 1500mm/1250mm/1000mm/550mm, B-axis: 360°, boring spindle diameter: 110mm, spindle speed: 4000rpm, gear ranges: 2, rapid traverse: 15m/min, tool taper: SK50, table dimensions X/Y: 1000mm/1250mm, T-slot width: 22mm, height of clamping surface above floor: 1050mm, max. table load: 6000kg, control: Heidenhain TNC 426. With electronic handwheel. Weight: approx. 13500kg. An on-site inspection is possible.
Webo in-line drilling machine - 2 machines: speed 90 - 1000 1/min. - 4 machines: speed 4000 - 6000 1/min. - Coolant device - Tool holder: MK2 - Width: 200 cm - Height: 200 cm - Depth: 100 cm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.
Paper drilling machine Nagel Citoborma 280 AB
I sell a Top Dubel drill multi-spindle drill Detel M-13, built in 2007. 3-spindle See good condition. Available the same.
Multi-stand drill Prior sale reserved - errors possible Internal Reference Number: D-1143-1
High precision drilling and milling machine Aciera 22 VA Good condition from school operations Year of construction approx. 1990 Table 600 x 320 mm Speed 40 - 3600 rpm Speed setting rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter 65 mm Drilling spindle stroke 120 mm Spindle holder: Aciera quick-change system Automatic thread cutting Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1.1 KW Lamp Some quick-change shots Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical information subject to reservation
I sell an Angular drill with hanging insert suitable for tur production. MARZANI MACCHINE CHEAP WORK Year of construction: 1993 Number of drilling spindle 1 (drill head fully -7 to +90° adjustable) Number of insert heads 1 (magazine suitable for turret hanging) Insert head mechanical, screw insert Very good condition. Available the same.
Drilling unit VD40: Automatic tool changer 10 positions, Power supply and displacement Asynchronously controlled servo motors, servo controllers, Spindle speed Stepless 0 – 2,500 rpm (servo motors), Maximum torque 440 Nm, Lubrication Internal and external mist lubrication air/oil, Tool holder SK 40, Maximum thickness to be drilled 100 mm, Drill diameter 5 – 40 mm, Thread tapping M6 – M30, Center point option Yes, Galvanizing option Yes, Layout highlighting option (optional) Yes, Pneumatic clamping Yes, Voortman height control: Max. acceleration Z-axis 2,000 mm/sec, Max. speed Z-axis 365 mm/sec Plasma cutting unit Smart Focus 400: Min. thickness 3 mm Max. thickness 100 mm Max. pierce capacity 50 mm Slag-free cutting max. 40 mm Marking Yes, with the same consumables Plasma gas structural steel: Cutting O2 ( 99.9% pure clean, dry, oil-free ) Marking Argon ...
- Infinitely variable speed control - Quickly adjustable drilling depth stop - Thread cutting device - Undervoltage triggers - Table height adjustment via rack - LED lighting in the head - Continuous/normal drilling capacity R1: 23/25 mm - Thread cutting performance (depending on slope) R1: max.M 16x1 - Spindle MK II - Drilling depth 100 mm - Projection 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): number 2, distance 125 mm - Speed display digital - Drilling depth display digital - Drill depth stop quickly adjustable - Feed by hand - Motor three-phase current 400 V - Spindle speeds infinitely variable R1 with 20-2,000 1/min Option: Coolant device: € 525,- FACTORY WARRANTY: 3 years DELIVERY: free domicile incl. packaging NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FAS ...
bore capacity in steel (diameter): 35 mm throat: 230 mm bore stroke: 125 mm spindle taper: ISO 40 spindle turning speed range: 115 - 1750 U/min : 560 mm : 175 mm table surface area: 1000 x 240 mm max. distance between table and spindle-nose: 375 mm connected load frequency: 400 V total power requirement: 0,85/1,5 kW weight of the machine ca.: 0,95 t dimensions of the machine ca.: 1,3 x 1,2 x 2,1 m Domestic equipments: automatic feed and handwheel. Drill chuck with MK4 holder Digital depth display Left / right switch. Emergency stop switch Pivot head swiveling Spindle protection. Small toolbox Machine base and X-axis feed optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Standard equipment - Thread cutting device - Control panel with OLED display - robust, high-quality drill head hood - LED lighting - quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with CEE plug - mechanical feed of the Z-axis - incl. electromagnetic coupling for 3 feed speeds - Drill cross with push button - in thread cutting mode: right-left SPECIFICATIONS Continuous/normal drilling performance (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Thread cutting capacity max.: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Projection: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Speed display digit ...
NUMBER OF SPINDLES 21 SPINDLE DISTANCE 32 MM DISTANCE BETWEEN FIRST AND LAST SPINDLE 640 MM DOWEL DRILL HEAD BY MAGGI MADE IN ITALY
Specifications: Uniform spindle spacing: 32 mm Number of spindles: 23 Distance between the first and last spindle on the drill head: 672 mm drilling depth: 80 mm Table size: approx. 900 x 545 mm size of the workpiece: 800 x 2500 x 100 Working pressure: 0.6 MPa Air consumption: 10 NL/cycle Voltage, frequency: 400 V/50 Hz Spindle speed / min.l: 2800 rpm. Motor power: 1.5 kW Weight ca: 400 kg Dimensions: 1220 x 1065 x 1400 mm Patented spiral system Programming and adjustment devices of horizontal and vertical Drilling depth. Pneumatic drill head shears Drill head frame of 0-90 degrees with blocking in any position and reference switching angle with each angle Head with quick-connect spindles (the quick-release buckets are a Zubehoer). 5 quick-release buckets are standard. 2 patented pneumatic pressure devices accident-protected. 2 side connectors on the table ...
Duebel hole drilling machine BORING SYSTEM 21 PRESTIGE QUICK CONNECTIONS 21 DRILLING SPINDLES AXLE DISTANCE 32 MM CENTER DISTANCE FROM THE FIRST TO THE LAST DRILL CHUCK 640 mm DRILLING DEPTH 65 mm Engine power 2 hp Aluminium stop with 2 folding straps equipped with 1 left stop 1500 mm and 1 right stop 1500 mm 5 drilling spindle droplets 2 Pneumatic hold-downs in a safe and secure manner incl. packaging Quick Connection Drilling Spindles Drill head in cast iron Cast iron work table Drilling depth adjustment via patented spiral system Pneumatic scraping of the drilling group from 00 to 90 ° adjustable in any position. Stop infinitely adjustable via millimeter scale with magnifying glass High drills over num. digital display adjustable Back-side stop max. travel 300 mm Fixed stop on 37 mm for doorband Machine built according to Ce standards
I sell a drill with cutting units COMEC FM0V8 2000, built in 1997. Working width max. 2000mm Configuration: 0 motors from below 1+1 motors from sides / angular adjustable 2 motors from behind / head angular adjustable 3 motors from above / head angular adjustable 4 pieces of material prints from above 2 cut saws from above / head angular adjustable Atypical 5-spindle drill heads Including 3 x 15mm / 2 x 25mm. Dubel heads in the price. Very good addition. Available the same.
Auction-ID: A3-46156-16485
Auction-ID: A3-46156-20548
maximum number of results exceeded
please refine your search
700 € 
